Commit Graph

57 Commits

Author SHA1 Message Date
Rebecca Cran
bcaa6ebc45 The FD_FORM ioctl used to ignore errors from the floppy controller; now when
it encounters an error it returns an error from the ioctl.
Ignore any errors when using the FD_FORM ioctl.

PR:	kern/103862
MFC after:	3 days
2011-02-21 09:56:08 +00:00
Ulrich Spörlein
aa12cea2cc mdoc: order prologue macros consistently by Dd/Dt/Os
Although groff_mdoc(7) gives another impression, this is the ordering
most widely used and also required by mdocml/mandoc.

Reviewed by:	ru
Approved by:	philip, ed (mentors)
2010-04-14 19:08:06 +00:00
Ed Schouten
71ccf09269 The last big commit: let usr.sbin/ use WARNS=6 by default. 2010-01-02 11:07:44 +00:00
Joerg Wunsch
81f5cd998c Drop the defunct FDOPT_NOERRLOG option from all the floppy utilities.
The kernel does not log floppy media errors anymore.

In fdcontrol, do always open the file descriptor in read-only mode so
it can operate on read-only media, as there is no longer a separate
control device to operate on.
2009-06-24 19:47:53 +00:00
Ruslan Ermilov
98d8b7924f Fix a nit noticed during translation. 2007-02-28 10:24:34 +00:00
Ruslan Ermilov
7901356c23 The default fill byte is 0xf6, not 0xf5. 2005-11-03 07:28:46 +00:00
Ruslan Ermilov
e1554781bb One of the DIAGNOSTICS sections should be EXIT STATUS. 2005-01-18 09:17:49 +00:00
Xin LI
4c1f1c62ca Cleanup usr.sbin/fd* so they can compile under WARNS=6.
fdcontrol/fdcontrol.c:
	- Add const constraint to an intermediate value
	  which is not supposed to be changed elsewhere.
fdread/fdread.c:
	- Use _devname in favor of devname to avoid name
	  conflicit.
	- -1 is less than any positive number so in order
	  to get the block to function, we should get the
	  block a little earlier.
	- Cast to remove signed when we are sure that a
	  return value is positive, or is compared with
	  an positive number (tracknumber of a floppy
	  disk is not likely to have UINT_MAX/2 anyway)
fdread/fdutil.c:
	- Use more specific initializer
fdwrite/fdwrite.c:
	- Use static on format_track since it's not
	  referenced in other places.
	- Use const char* to represent string constant.

Bump WARNS accordingly.
2005-01-08 15:46:06 +00:00
Poul-Henning Kamp
1b67be7b75 Rewrite of the floppy driver to make it MPsafe & GEOM friendly:
Centralize the fdctl_wr() function by adding the offset in
	the resource to the softc structure.

	Bugfix: Read the drive-change signal from the correct place:
	same place as the ctl register.

	Remove the cdevsw{} related code and implement a GEOM class.

	Ditch the state-engine and park a thread on each controller
	to service the queue.

	Make the interrupt FAST & MPSAFE since it is just a simple
	wakeup(9) call.

	Rely on a per controller mutex to protect the bioqueues.
	Grab GEOMs topology lock when we have to and Giant when
	ISADMA needs it.  Since all access to the hardware is
	isolated in the per controller thread, the rest of the
	driver is lock & Giant free.

	Create a per-drive queue where requests are parked while
	the motor spins up.  When the motor is running the requests
	are purged to the per controller queue.  This allows
	requests to other drives to be serviced during spin-up.

	Only setup the motor-off timeout when we finish the last
	request on the queue and cancel it when a new request
	arrives.  This fixes the bug in the old code where the motor
	turned off while we were still retrying a request.

	Make the "drive-change" work reliably.  Probe the drive on
	first opens.  Probe with a recal and a seek to cyl=1 to
	reset the drive change line and check again to see if we
	have a media.

	When we see the media disappear we destroy the geom provider,
	create a new one, and flag that autodetection should happen
	next time we see a media (unless a specific format is configured).

	Add sysctl tunables for a lot of drive related parameters.
	If you spend a lot of time waiting for floppies you can
	grab the i82078 pdf from Intels web-page and try tuning
	these.

	Add sysctl debug.fdc.debugflags which will enable various
	kinds of debugging printfs.

	Add central definitions of our well known floppy formats.

	Simplify datastructures for autoselection of format and
	call the code at the right times.

	Bugfix: Remove at least one piece of code which would have
	made 2.88M floppies not work.

	Use implied seeks on enhanced controllers.

	Use multisector transfers on all controllers.  Increase
	ISADMA bounce buffers accordingly.

	Fall back to single sector when retrying.  Reset retry count
	on every successful transaction.

	Sort functions in a more sensible order and generally tidy
	up a fair bit here and there.

	Assorted related fixes and adjustments in userland utilities.

WORKAROUNDS:
	Do allow r/w opens of r/o media but refuse actual write
	operations.  This is necessary until the p4::phk_bufwork
	branch gets integrated (This problem relates to remounting
	not reopening devices, see sys/*/*/${fs}_vfsops.c for details).

	Keep PC98's private copy of the old floppy driver compiling
	and presumably working (see below).

TODO (planned)

	Move probing of drives until after interrupts/timeouts work
	(like for ATA/SCSI drives).

TODO (unplanned)

	This driver should be made to work on PC98 as well.

	Test on YE-DATA PCMCIA floppy drive.

	Fix 2.88M media.

This is a MT5 candidate (depends on the bioq_takefirst() addition).
2004-08-20 15:14:25 +00:00
Yoshihiro Takahashi
1a06a03cb8 Add PC98 supports.
Submitted by:	Watanabe Kazuhiro <CQG00620@nifty.ne.jp> (mostly)
2004-03-28 13:42:27 +00:00
Eric Anholt
624a58b6e6 From PR:
In fdformat.c a closing parenthesis is at the wrong place.  Instead of
adding sizeof _PATH_DEV + 1 to the length of argv[optind], the length of the
string starting (sizeof _PATH_DEV + 1) characters after argv[optind]'s
beginning (accessing junk memory if we jump over the terminating null
character) is passed to malloc().

PR:		bin/60026
Submitted by:	Stefan Farfeleder <stefan@fafoe.narf.at>
2004-01-07 05:28:57 +00:00
Mike Barcroft
467a0b0647 Include <string.h> for some prototypes, rather than depending on
pollution from <strings.h>.
2002-04-01 21:13:17 +00:00
Ruslan Ermilov
ba625eb241 mdoc(7) police: doh, again I forgot about this XXX. 2002-01-10 17:04:10 +00:00
Ruslan Ermilov
2f1b3c5c75 mdoc(7) police: tidy up the markup. 2002-01-10 17:00:36 +00:00
Joerg Wunsch
0377dd590e Second round of floppy disk driver documentation updates: document the
changes in the userland utilities.  For fdcontrol(8), i now finally
keep my promise made more than 7 years ago that ``the fdcontrol
utility is currently under development and the user interface will
likely change''. :-)
2001-12-25 21:21:18 +00:00
Joerg Wunsch
1a6bed6863 Long promised major enhancement set for the floppy disk driver:
. The main device node now supports automatic density selection for
  commonly used media densities.  So you can stuff your 1.44 MB and
  720 KB media into your drive and just access /dev/fd0, no questions
  asked.  It's all that easy, isn't it? :)

. Device density handling has been completely overhauled.  The old way
  of hardwired kernel density knowledge is no longer there.  Instead,
  the kernel now implements 16 subdevices per drive.  The first
  subdevice uses automatic density selection, while the remaining 15
  devices are freely programmable.  They can be assigned an arbitrary
  name of the form /dev/fd[:digit]+.[:digit:]{1,4}, where the second
  number is meant to either implement device names that are mnemonic
  for their raw capacity (as it used to be), or they can alternatively
  be created as "anonymous" devices like fd0.1 through fd0.15,
  depending on the taste of the administrator.  After creating a
  subdevice, it is initialized to the maximal native density of the
  respective drive type, so it needs to be customized for other
  densities by using fdcontrol(8).  Pseudo-partition devices (fd0a
  through fd0h) are still supported as symlinks.

. The old hack to use flags 0x1 to always assume drive 0 were there is
  no longer supported; this is now supposed to be done by wiring the
  devices down from the loader via device flags.  On IA32
  architectures, the first two drives are looked up in the CMOS
  configuration records though.  On PCMCIA (i. e., the Y-E Data
  controller of the Toshiba Libretto), a single drive is always
  assumed.

. Other specialities like disabling the FIFO and not probing the drive
  at boot-time are selected by per-controller or per-drive flags, too.

. Unit attentions (media has been changed) are supposed to be detected
  now; density autoselection only occurs after a unit attention.  (Can
  be turned off by a per-drive flag, this will cause each Fdopen() to
  perform the autoselection.)

. FM floppies can be handled now (on controllers that actually support
  it -- not all do these days).

. Fdopen() can be told to avoid density selection by setting
  O_NONBLOCK; this leaves the descriptor in a half-opened state where
  only a few ioctls are accepted.  This is necessary to run fdformat
  on a device that uses automatic density selection (since you cannot
  autoselect on an unformatted medium, obviously).

. Just differentiate between a plain old NE765 and the enhanced chips,
  but don't try more; the existing code was wrong and only misdetected
  the chips anyway.

BUGS and TODOs:

. All documentation update still needs to be done.

. Formatting not-so-standard format yields unpredictable results; i
  have yet to figure out why this happens.  "Standard" formats like
  720 and 1440 KB do work, however.

. rc scripts are needed to setup device nodes with nonstandard
  densities (like the old /dev/fdN.MMM we used to have).

. Obtaining device flags from the kernel environment doesn't work yet,
  thus currently only drives that are present in (IA32) CMOS are
  really detected.  Someone who knows the odds and ends about device
  flags is needed here, i can't figure out what i'm doing wrong.

. 2.88 MB still needs to be done.
2001-12-15 19:09:04 +00:00
Ruslan Ermilov
753d686d34 mdoc(7) police: s/BSD/.Bx/ where appropriate. 2001-08-14 10:01:54 +00:00
Ruslan Ermilov
c4d9468ea0 mdoc(7) police:
Avoid using parenthesis enclosure macros (.Pq and .Po/.Pc) with plain text.
Not only this slows down the mdoc(7) processing significantly, but it also
has an undesired (in this case) effect of disabling hyphenation within the
entire enclosed block.
2001-08-07 15:48:51 +00:00
David E. O'Brien
90e655ea4e Perform a major cleanup of the usr.sbin Makefiles.
These are not perfectly in agreement with each other style-wise, but they
are orders of orders of magnitude more consistent style-wise than before.
2001-07-20 06:20:32 +00:00
Joerg Wunsch
4f0b1b7805 Make fdformat WARN=2 ready. 2001-07-03 21:43:41 +00:00
Ruslan Ermilov
ac731e6941 Fixed the world breakage in rev. 1.8 (space after -I).
While here, removed the GCCism (replaced with WARNS?=1).
2001-07-03 09:48:28 +00:00
Joerg Wunsch
e42ad56f1a Use the printstatus() function from ${.CURDIR}/../fdread/fdutil.c to
give a bit more information about up to 10 errors encountered during
formatting (unless -q has been specified, of course).

While being here, removed a bitrotten comment in the Makefile, and
kill the old Emacs local variable stuff at the end of fdformat.c
that's no longer useful anway.
2001-07-02 21:24:03 +00:00
Joerg Wunsch
a5cef3b45a Now that we've got it, use FDOPT_NOERRLOG for fdformat and fdwrite to
avoid blasting the syslog with error messages from bad floppies.  Both
tools have their own error reporting anyway (which could easily be
cluttered by the syslog output on your terminal).
2001-06-26 22:19:32 +00:00
Joerg Wunsch
d137c337ae Part #2 of the <machine/ioctl_fd.h> => <sys/fdcio.h> move: handle the
tools in usr.sbin/fd*.
2001-06-06 06:16:19 +00:00
Poul-Henning Kamp
ad70dcf35a fdformat prompts for user confirmation. it exits 0 if the user
doesn't confirm, which needlessly complicates scripts.

PR:		15339
Submitted by:	richard winkel rich@math.missouri.edu
MFC after:	1 week
2001-05-23 20:30:45 +00:00
Ruslan Ermilov
345e52e742 - Backout botched attempt to introduce MANSECT feature.
- MAN[1-9] -> MAN.
2001-03-26 14:42:20 +00:00
Ruslan Ermilov
c73e22c3d4 Set the default manual section for usr.sbin/ to 8. 2001-03-20 18:17:26 +00:00
Ruslan Ermilov
8b5c4af3ff Prepare for mdoc(7)NG. 2000-12-27 15:30:30 +00:00
David E. O'Brien
1a37aa566b Add `_PATH_DEVZERO'.
Use _PATH_* where where possible.
2000-12-09 09:35:55 +00:00
Ruslan Ermilov
f4d874a1db mdoc(7) police: do not split author names in the AUTHORS section. 2000-11-22 09:35:58 +00:00
Ruslan Ermilov
e97407b4f2 mdoc(7) police: use the new features of the Nm macro. 2000-11-20 20:10:44 +00:00
Ruslan Ermilov
726b61ab5f Avoid use of direct troff requests in mdoc(7) manual pages. 2000-11-10 17:46:15 +00:00
Poul-Henning Kamp
d2c1dda326 Add -y option which doesn't ask for confimation, but still shows progress
PR:		9259
Submitted by:	Clark Gaylord <cgaylord@vt.edu>
2000-06-01 22:27:30 +00:00
Sheldon Hearn
f2e366a105 Remove single-space hard sentence breaks. These degrade the quality
of the typeset output, tend to make diffs harder to read and provide
bad examples for new-comers to mdoc.
2000-03-01 14:09:25 +00:00
Jeroen Ruigrok van der Werven
31245fb201 Fix fdformat to not use /dev/r* device nodes anymore, this usage
has been made obsolete by the block/char device merging.

Reflect this change in the manual page and fix the usage of a
backslash in ``e.g.''.

Reviewed by:	bright, sheldonh, phk
2000-01-23 12:49:42 +00:00
KATO Takenori
d0fd62ec07 - Added 640KB and 1232KB formats support.
- Added $FreeBSD$.

Submitted by:	nyan
2000-01-07 09:02:47 +00:00
Philippe Charnier
81ebd9e086 Correct use of .Nm. 1999-10-17 15:54:50 +00:00
Peter Wemm
97d92980a9 $Id$ -> $FreeBSD$ 1999-08-28 01:35:59 +00:00
Nik Clayton
414a35e60a Add $Id$, to make it simpler for members of the translation teams to
track.

The Id line is normally at the bottom of the main comment block in the
man page, separated from the rest of the manpage by an empty comment,
like so;

     .\"    $Id$
     .\"

If the immediately preceding comment is a @(#) format ID marker than the
the $Id$ will line up underneath it with no intervening blank lines.
Otherwise, an additional blank line is inserted.

Approved by:            bde
1999-07-12 20:12:29 +00:00
David E. O'Brien
74b4790de7 mkdosfs(1) is dead, refere to newfs_msdos(8) 1998-09-29 17:31:28 +00:00
Dag-Erling Smørgrav
4970253b4f fd(4) referenced in HISTORY has nothing to do with floppy disks;
changed to fdc(4).
1998-04-20 11:34:47 +00:00
Philippe Charnier
f12a14713b .Sh AUTHOR -> .Sh AUTHORS. Use .An/.Aq. 1998-03-23 08:31:20 +00:00
Philippe Charnier
6c9d588507 Use err(3). Document options in man page, not in usage string. 1997-09-17 06:32:45 +00:00
Wolfram Schneider
bfd34a4a60 Sort cross references. 1997-01-20 00:03:00 +00:00
Mike Pritchard
4a8d02835c Fix a bunch of spelling errors in a bunch of man pages. 1996-01-30 13:52:50 +00:00
Joerg Wunsch
65afc4bdf0 Cross-reference newfs(8), and mkdosfs(1). 1995-11-05 19:23:42 +00:00
Rodney W. Grimes
709e8f9ae1 Remove trailing whitespace. 1995-05-30 03:57:47 +00:00
Joerg Wunsch
3023486ce7 Corrected the xref to the driver man page to be fdc(4) now that
we have one (instead of fd(4)).
1994-10-28 17:07:32 +00:00
Joerg Wunsch
9a89db44b8 Transfer speed definitions are now also found in <machine/ioctl_fd.h>.
Remove the old include file, since it used to be in a non-public place.
1994-09-25 18:44:26 +00:00
Poul-Henning Kamp
cb3131379f Added a missing ${DESTDIR}. The real problem is that stuff related to
floppy formatting is in /sys/i386/isa/fdreg.h, it should be in /usr/include
somewhere ??
1994-09-18 07:42:11 +00:00