when removing an interrupt handler from an IRQ during shutdown. During
shutdown we are already bound to CPU 0 and this was triggering a panic.
MFC after: 3 days
out of the original commit of i7 support. These are all the counters
on pages A-32 and A-33 of the _Intel(R) 64 and IA32 Architectures
Software Developer's Manual Vol 3B_, June 2009. Almost all
of these counters relate to operations on the L2 cache.
Reviewed by: jkoshy
MFC after: 1 month
L2 code does not have the ethernet address for the destination
within the broadcast domain in the table, we remember the
original mbuf in `la_hold' in arpresolve() and send out a
different packet with an arp request.
In case there will be more upper layer packets to send we will
free an earlier one held in `la_hold' and queue the new one.
Once we get a packet in, with which we can perfect our arp table
entry we send out the original 'on hold' packet, should there
be any.
Rather than continuing to process the packet that we received,
we returned without freeing the packet that came in, which
basically means that we leaked an mbuf for every arp request
we sent.
Rather than freeing the received packet and returning, continue
to process the incoming arp packet as well.
This should (a) improve some setups, also proxy-arp, in case it was an
incoming arp request and (b) resembles the behaviour FreeBSD had
from day 1, which alignes with RFC826 "Packet reception" (merge case).
Rename 'm0' to 'hold' to make the code more understandable as
well as diffable to earlier versions more easily.
Handle the link-layer entry 'la' lock comepletely in the block
where needed and release it as early as possible, rather than
holding it longer, down to the end of the function.
Found by: pointyhat, ns1
Bug hunting session with: erwin, simon, rwatson
Tested by: simon on cluster machines
Reviewed by: ratson, kmacy, julian
MFC after: 3 days
Remove the altkstacks, instead instantiate threads with kernel stack
allocated with the right size from the start. For the thread that has
kernel stack cached, verify that requested stack size is equial to the
actual, and reallocate the stack if sizes differ [1].
This fixes the bug introduced by r173361 that was committed several days
after r173004 and consisted of kthread_add(9) ignoring the non-default
kernel stack size.
Also, r173361 removed the caching of the kernel stacks for a non-first
thread in the process. Introduce separate kernel stack cache that keeps
some limited amount of preallocated kernel stacks to lower the latency
of thread allocation. Add vm_lowmem handler to prune the cache on
low memory condition. This way, system with reasonable amount of the
threads get lower latency of thread creation, while still not exhausting
significant portion of KVA for unused kstacks.
Submitted by: peter [1]
Discussed with: jhb, julian, peter
Reviewed by: jhb
Tested by: pho (and retested according to new test scenarious)
MFC after: 1 week
alignment requirement could be multiple of 4 bytes but I think
using descriptor size would make intention clearer.
Previously the size of rx descriptor was not power of 2 so it
caused panic in bus_dmamem_alloc(9).
Reported by: Jeff Blank (jb000003 <> mr-happy dot com)
MFC after: 3 days
the previous ap is no longer in range) the device will deliver bmiss
interrupts and trigger the state machine. Also arrange to sync the
beacon timers on the next received beacon frame so that when we don't
roam we re-synchronize with the ap.
Tested by: trasz
MFC after: 1 week
- Routing messages are not generated when adding and removing
interface address aliases.
- Loopback route installed for an interface address alias is
not deleted from the routing table when that address alias
is removed from the associated interface.
- Function in_ifscrub() is called extraneously.
Reviewed by: gnn, kmacy, sam
MFC after: 3 days
- Always calculate the cache bits instead of doing it on-demand.
- Always set changed to TRUE rather than only doing it if it is false.
Discussed with: alc
MFC after: 3 days
page into 4KB pages as needed. This should be fairly rare in practice
on i386. This includes merging the following changes from the amd64 pmap:
180430, 180485, 180845, 181043, 181077, and 196318.
- Add basic support for changing attributes on PDEs to pmap_change_attr()
similar to the support in the initial version of pmap_change_attr() on
amd64 including inlines for pmap_pde_attr() and pmap_pte_attr().
- Extend pmap_demote_pde() to include the ability to instantiate a new page
table page where none existed before.
- Enhance pmap_change_attr(). Use pmap_demote_pde() to demote a 2/4MB page
mapping to 4KB page mappings when the specified attribute change only
applies to a portion of the 2/4MB page. Previously, in such cases,
pmap_change_attr() gave up and returned an error.
- Correct a critical accounting error in pmap_demote_pde().
Reviewed by: alc
MFC after: 3 days
used by the suspension code, not greater then mnt_ref reference
counter value. Increment mnt_ref together with write counter
in vn_start_write()/ vn_start_secondary_write(), releasing in
vn_finished_write/vn_finished_secondary_write().
Since r186197, unmount code requires that no writers occured after all
references are expired. We still could get write counter incremented
for freed or reused struct mount, but it seems to be innocent, since
corresponding vnode should be referenced and reclaimed then.
Reported by: pho (last half a year), erwin
Reviewed by: attilio
Tested by: pho, erwin
MFC after: 1 week
correctly and do not match a colliding Debian GNU/kFreeBSD
brandinfo statements.
For this mark the Debian GNU/kFreeBSD brandinfo that it must have
an .note.ABI-tag section and ignore the old EI_OSABI brandinfo
when comparing a possibly colliding set of options.
Due to SYSINIT we add the brandinfo in a non-deterministic order,
so native FreeBSD is not always first. We may want to consider
to force native FreeBSD to come first as well.
The only way a problem could currently be noticed is when running an
i386 binary without the .note.ABI-tag on amd64 and the Debian GNU/kFreeBSD
brandinfo was matched first, as the fallback to ld-elf32.so.1 does
not exist in that case.
Reported and tested by: ticso
In collaboration with: kib
MFC after: 3 days
configured prefixes. Since these statically configured prefixes
do not have any associated advertising routers, these prefixes
are treated as unreachable and those prefix routes are deleted
from the routing table. Therefore bypass prefixes that are not
learned from router advertisements during prefix on-link check.
Reviewed by: hrs
