Commit Graph

82 Commits

Author SHA1 Message Date
Marius Strobl
4b7ec27007 - There's no need to overwrite the default device method with the default
one. Interestingly, these are actually the default for quite some time
  (bus_generic_driver_added(9) since r52045 and bus_generic_print_child(9)
  since r52045) but even recently added device drivers do this unnecessarily.
  Discussed with: jhb, marcel
- While at it, use DEVMETHOD_END.
  Discussed with: jhb
- Also while at it, use __FBSDID.
2011-11-22 21:28:20 +00:00
Marius Strobl
5ca7dfffdf Revert r224157, re-enabling r222135. The underlying problem keeping the
latter from working as expected was fixed in r225014.

MFC after:	3 days
Approved by:	re (kib)
2011-08-19 19:13:31 +00:00
Pyun YongHyeon
23b179f5d3 Revert r222135 by allowing controller reinitialization. Due to
unknown reason Apple UniNorth2 gem(4) device required manual
interface down/up operation after r222135.  Even though this is not
correct thing and I don't like to revert it but it would be better
than breaking gem(4) on PPC.  This should be revisited.

PR:	kern/157405
2011-07-17 21:54:51 +00:00
Marius Strobl
5ed0b95417 Correct r223648; as gem_init_locked() was calling gem_setladrf(), which
sets GEM_MAC_RX_CONFIG based on sc_mac_rxcfg which in turn is initialized
to zero, before reading the supposedly default configuration we were
effectively not basing sc_mac_rxcfg and thus GEM_MAC_RX_CONFIG on the
default configuration. Solve this by calling gem_setladrf() after reading
in the default configuration of GEM_MAC_RX_CONFIG. This also avoids the
need to distinguish whether gem_setladrf() should enable the RX MAC again
and should be slightly more correct as we're now doing all of the RX MAC
configuration in the intended step.
2011-07-12 13:06:44 +00:00
Marius Strobl
9f9cc2edd8 According to the OpenSolaris source the PCI latency and the cache line size
should be set for Sun ERI.
Tested by:	yongari
2011-07-12 08:20:15 +00:00
Marius Strobl
2b2f3c09a6 Fix typo in r223648 which was accidentally committed 2011-06-28 16:44:02 +00:00
Marius Strobl
c0e3e9d4d2 - In gem_reset_rx() also reset the RX MAC which is necessary in order to
get it out of a stuck condition that can be caused by GEM_MAC_RX_OVERFLOW.
- In gem_reset_rxdma() call gem_setladrf() in order to reprogram the RX
  filter and restore the previous content of GEM_MAC_RX_CONFIG. While at it
  consistently use the newly introduced sc_mac_rxcfg throughout the driver
  instead of reading the its old content.
- Increment if_iqdrops instead of if_ierrors in case of RX buffer allocation
  failure.
- According to the GEM datasheet the RX MAC should also be disabled in
  gem_setladrf() before changing its configuration.
- Add error messages to gem_disable_{r,t}x() and take advantage of these
  throughout the driver instead of duplicating their functionality all over
  the place.

In joint forces with:	yongari
2011-06-28 16:16:43 +00:00
Pyun YongHyeon
83242185a3 Remove unnecessary controller reinitialization by checking
IFF_DRV_RUNNING flag.  Previously running dhclient or adding alias
addresses reinitialized controller and it resulted in unnecessary
link flips.

Reviewed by:	marius
2011-05-20 17:01:22 +00:00
Marius Strobl
af5ac863ea Correct spelling in comments.
Submitted by:	brucec
2011-04-22 09:41:51 +00:00
Marius Strobl
9a68cbd33d - Fix and enable support for flow control.
- Partially revert r172334; as it turns out the DELAYs in gem_reset_{r,t}x()
  are actually necessary although bus space barriers and gem_bitwait() are
  used, otherwise the controller may trigger an IOMMU errors on at least
  sparc64. This is in line with what Linux and OpenSolaris do.
2010-11-22 22:13:26 +00:00
Marius Strobl
8e5d93dbb4 Convert the PHY drivers to honor the mii_flags passed down and convert
the NIC drivers as well as the PHY drivers to take advantage of the
mii_attach() introduced in r213878 to get rid of certain hacks. For
the most part these were:
- Artificially limiting miibus_{read,write}reg methods to certain PHY
  addresses; we now let mii_attach() only probe the PHY at the desired
  address(es) instead.
- PHY drivers setting MIIF_* flags based on the NIC driver they hang
  off from, partly even based on grabbing and using the softc of the
  parent; we now pass these flags down from the NIC to the PHY drivers
  via mii_attach(). This got us rid of all such hacks except those of
  brgphy() in combination with bce(4) and bge(4), which is way beyond
  what can be expressed with simple flags.

While at it, I took the opportunity to change the NIC drivers to pass
up the error returned by mii_attach() (previously by mii_phy_probe())
and unify the error message used in this case where and as appropriate
as mii_attach() actually can fail for a number of reasons, not just
because of no PHY(s) being present at the expected address(es).

Reviewed by:	jhb, yongari
2010-10-15 14:52:11 +00:00
Marius Strobl
65f2c0ff58 Merge r207585 from cas(4):
- Don't probe for PHYs if we already know to use a SERDES. Unlike as with
  cas(4) this only serves to speed up the the device attach though and can
  only be determined via the OFW device tree but not from the VPD.
- Don't touch the MIF when using a SERDES.
- Add some missing bus space barriers, mainly in the PCS code path.
2010-09-16 09:29:48 +00:00
Attilio Rao
651aa2d896 KTR_CTx are long time aliased by existing classes so they can't serve
their purpose anymore. Axe them out.

Sponsored by:	Sandvine Incorporated
Discussed with:	jhb, emaste
Possible MFC:	TBD
2010-07-21 10:05:07 +00:00
Marius Strobl
9e48f1e7a5 According to the Linux sungem driver, in case of Apple (K2) GMACs
GEM_MIF_CONFIG_MDI0 cannot be trusted when the firmware has powered
down the chip so the internal transceiver has to be hardcoded. This
is also in line with the AppleGMACEthernet driver, which just doesn't
distinguish between internal/external transceiver and MDIO/MDI1
respectively in the first place. Tested by: Andreas Tobler

MFC after:	1 week
2010-02-22 21:01:08 +00:00
Nathan Whitehorn
635dc3f7ff Work around a quirk with the G5 Xserve, which has a fake GMAC controller
with an all-zero MAC address. In this case, don't attach.

Discussed with:	marius
2009-10-18 17:11:16 +00:00
Robert Watson
eb956cd041 Use if_maddr_rlock()/if_maddr_runlock() rather than IF_ADDR_LOCK()/
IF_ADDR_UNLOCK() across network device drivers when accessing the
per-interface multicast address list, if_multiaddrs.  This will
allow us to change the locking strategy without affecting our driver
programming interface or binary interface.

For two wireless drivers, remove unnecessary locking, since they
don't actually access the multicast address list.

Approved by:	re (kib)
MFC after:	6 weeks
2009-06-26 11:45:06 +00:00
Marius Strobl
b3a1f860fa Revert the part of r194763 which added a dying flag and instead
call ether_ifdetach(9) before stopping the controller and the
callouts. The consensus is that the latter is now safe to do and
should also solve the problem of active BPF listeners clearing
promiscuous mode can result in the tick callout being restarted
which in turn will trigger a panic once it's actually gone.
2009-06-24 19:04:08 +00:00
Marius Strobl
9ba2b298df - Initialize the ifnet structure, especially if_dname, before probing
the PHYs as some PHY drivers use it (but probably shouldn't). How
  gem(4) has worked with brgphy(4) on powerpc without this so far is
  unclear to me.
- Introduce a dying flag which is set during detach and checked in
  gem_ioctl() in order to prevent active BPF listeners to clear
  promiscuous mode which may lead to the tick callout being restarted
  which will trigger a panic once it's actually gone.
- In gem_stop() reset rather than just disable the transmitter and
  receiver in order to ensure we're not unloading DMA maps still in
  use by the hardware. [1]
- The blanking time is specified in PCI clocks so we should use twice
  the value when operating at 66MHz.
- Spell some 2 as ETHER_ALIGN and a 19 as GEM_STATUS_TX_COMPLETION_SHFT
  to make the actual intentions clear.
- As we don't unload the peak attempts counter ignore its overflow
  interrupts.
- Remove a stale setting of a variable to GEM_TD_INTERRUPT_ME which
  isn't used afterwards.
- For optimum performance increment the TX kick register in multiples
  of 4 if possible as suggested by the documentation.
- Partially revert r164931; drivers should only clear the watchdog
  timer if all outstanding TX descriptors are done.
- Fix some debugging strings.
- Add a missing BUS_DMASYNC_POSTWRITE in gem_rint().
- As the error paths in the interrupt handler are generally unlikely
  predict them as false.
- Add support for the SBus version of the GEM controller. [2]
- Add some lock assertions.
- Improve some comments.
- Fix some more or less cosmetic issues in the code of the PCI front-end.
- Change some softc members to be unsigned where more appropriate and
  remove unused ones.

Approved by:	re (kib)
Obtained from:	NetBSD (partially) [2], OpenBSD [1]
MFC after:	2 weeks
2009-06-23 20:36:59 +00:00
Marius Strobl
78d22f42a8 - Restore the behavior of enabling the MII buffer for an internal
PHY only and not also in the case of an external PHY currently
  doing full duplex, which accidentally got broken in r172334.
  It's still not clear to me why we need to enable the buffer for
  an internal PHY though.
- Count excess and late collisions as output errors. [1]
- Count receive errors as input errors. [1]

Obtained from:	NetBSD [1]
MFC after:	3 days
2008-08-23 15:03:26 +00:00
Marius Strobl
ccb1212a56 o The FreeBSD bus_dmamap_sync(9) supports ored together flags for quite
some time now so collapse calls accordingly.
o Given that gem_load_txmbuf() is allowed to fail resulting in a packet
  drop also for quite some time now implement the functionality of
  gem_txcksum() by means of m_pullup(9), which de-obfuscates the code
  and allows to always retrieve the correct length of the IP header.
o Add missing BUS_DMASYNC_PREREAD when syncing the control DMA maps in
  gem_rint() and gem_start_locked().
o Correct some bus_barrier(9) calls to do a read/write barrier as we
  do a read after a write. Add some missing ones in gem_mii_readreg()
  and gem_mii_writereg().
o According to the Apple GMAC driver, the GEM ASIC specification and
  the OpenSolaris eri(7D) the TX FIFO threshold has to be set to 0x4ff
  for the Gigabit variants and 0x100 for the ERI in order do avoid TX
  underruns.
o In gem_init_locked():
  - be conservative and enable the RX and TX MACs,
  - don't clear GEM_LINK otherwise we don't ever mark the link as up
    again if gem_init_locked() is called from gem_watchdog(),
  - remove superfluous setting of sc_ifflags.
o Don't bother to check whether the interface is running or whether its
  queue is empty before calling gem_start_locked() in gem_tint(), the
  former will check these anyway.
o Call gem_start_locked() in gem_watchdog() in order to try to get
  some more packets going.
o In gem_mii_writereg() after reseting the PCS restore its configuration.

GMAC testing:	grehan, marcel
MFC after:	2 weeks
2008-06-22 13:54:51 +00:00
Marius Strobl
bd3d9826d7 Split the registers into two halves in preparation for SBus support.
Obtained from:	NetBSD (loosely)
MFC after:	2 weeks
2008-03-24 17:23:53 +00:00
Marius Strobl
801772ec32 - Fix some style bugs and remove another banal comment missed in
rev. 1.46.
- Move the KASSERT on gem_add_rxbuf() to the right spot and add an
  equivalent one to gem_disable_tx().
2008-03-09 17:55:19 +00:00
John Baldwin
304a4c6fb1 - Retire npe_defrag(), gem_defrag(), msk_defrag(), nfe_defrag(), and
re_defrag() and use m_collapse() instead.
- Replace a reference to ath_defrag() in a comment in if_wpi.c with
  m_collapse().
2008-01-17 23:37:47 +00:00
Marius Strobl
2a79fd39b4 o In preparation for basing a new driver on this one:
- ANSIfy
  - try to bring closer to style(9)
  - remove banal comments.
o Add my copyright for having done lots of fixes and improvements.
2007-12-30 01:32:03 +00:00
Pyun YongHyeon
e489b71b07 Fix a NULL pointer dereference in Tx checksum calculation.
Pointed out by: marius
2007-10-13 00:24:09 +00:00
Marius Strobl
1ed3fed743 o Revert the part of if_gem.c rev. 1.35 which added a call to gem_stop()
to gem_attach() as the former access softc members not yet initialized
  at that time and gem_reset() actually is enough to stop the chip. [1]
o Revise the use of gem_bitwait(); add bus_barrier() calls before calling
  gem_bitwait() to ensure the respective bit has been written before we
  starting polling on it and poll for the right bits to change, f.e. even
  though we only reset RX we have to actually wait for both GEM_RESET_RX
  and GEM_RESET_TX to clear. Add some additional gem_bitwait() calls in
  places we've been missing them according to the GEM documentation.
  Along with this some excessive DELAYs, which probably only were added
  because of bugs in gem_bitwait() and its use in the first place, as
  well as as have of an gem_bitwait() reimplementation in gem_reset_tx()
  were removed.
o Add gem_reset_rxdma() and use it to deal with GEM_MAC_RX_OVERFLOW errors
  more gracefully as unlike gem_init_locked() it resets the RX DMA engine
  only, causing no link loss and the FIFOs not to be cleared. Also use it
  deal with GEM_INTR_RX_TAG_ERR errors, with previously were unhandled.
  This was based on information obtained from the Linux GEM and OpenSolaris
  ERI drivers.
o Turn on workarounds for silicon bugs in the Apple GMAC variants.
  This was based on information obtained from the Darwin GMAC and Linux GEM
  drivers.
o Turn on "infinite" (i.e. maximum 31 * 64 bytes in length) DMA bursts.
  This greatly improves especially RX performance.
o Optimize the RX path, this consists of:
  - kicking the receiver as soon as we've a spare descriptor in gem_rint()
    again instead of just once after all the ready ones have been handled;
  - kicking the receiver the right way, i.e. as outlined in the GEM
    documentation in batches of 4 and by pointing it to the descriptor
    after the last valid one;
  - calling gem_rint() before gem_tint() in gem_intr() as gem_tint() may
    take quite a while;
  - doubling the size of the RX ring to 256 descriptors.
  Overall the RX performance of a GEM in a 1GHz Sun Fire V210 was improved
  from ~100Mbit/s to ~850Mbit/s.
o In gem_add_rxbuf() don't assign the newly allocated mbuf to rxs_mbuf
  before calling bus_dmamap_load_mbuf_sg(), if bus_dmamap_load_mbuf_sg()
  fails we'll free the newly allocated mbuf, unable to recycle the
  previous one but a NULL pointer dereference instead.
o In gem_init_locked() honor the return value of gem_meminit().
o Simplify gem_ringsize() and dont' return garbage in the default case.
  Based on OpenBSD.
o Don't turn on MAC control, MIF and PCS interrupts unless GEM_DEBUG is
  defined as we don't need/use these interrupts for operation.
o In gem_start_locked() sync the DMA maps of the descriptor rings before
  every kick of the transmitter and not just once after enqueuing all
  packets as the NIC might instantly start transmitting after we kicked
  it the first time.
o Keep state of the link state and use it to enable or disable the MAC
  in gem_mii_statchg() accordingly as well as to return early from
  gem_start_locked() in case the link is down. [3]
o Initialize the maximum frame size to a sane value.
o In gem_mii_statchg() enable carrier extension if appropriate.
o Increment if_ierrors in case of an GEM_MAC_RX_OVERFLOW error and in
  gem_eint(). [3]
o Handle IFF_ALLMULTI correctly; don't set it if we've turned promiscuous
  group mode on and don't clear the flag if we've disabled promiscuous
  group mode (these were mostly NOPs though). [2]
o Let gem_eint() also report GEM_INTR_PERR errors.
o Move setting sc_variant from gem_pci_probe() to gem_pci_attach() as
  device probe methods are not supposed to touch the softc.
o Collapse sc_inited and sc_pci into bits for sc_flags.
o Add CTASSERTs ensuring that GEM_NRXDESC and GEM_NTXDESC are set to
  legal values.
o Correctly set up for 802.3x flow control, though #ifdef out the code
  that actually enables it as this needs more testing and mainly a proper
  framework to support it.
o Correct and add some conversions from hard-coded functions names to
  __func__ which were borked or forgotten in if_gem.c rev. 1.42.
o Use PCIR_BAR instead of a homegrown macro.
o Replace sc_enaddr[6] with sc_enaddr[ETHER_ADDR_LEN].
o In gem_pci_attach() in case attaching fails release the resources in
  the opposite order they were allocated.
o Make gem_reset() static to if_gem.c as it's not needed outside that
  module.
o Remove the GEM_GIGABIT flag and the associated code; GEM_GIGABIT was
  never set and the associated code was in the wrong place.
o Remove sc_mif_config; it was only used to cache the contents of the
  respective register within gem_attach().
o Remove the #ifdef'ed out NetBSD/OpenBSD code for establishing a suspend
  hook as it will never be used on FreeBSD.
o Also probe Apple Intrepid 2 GMAC and Apple Shasta GMAC, add support for
  Apple K2 GMAC. Based on OpenBSD.
o Add support for Sun GBE/P cards, or in other words actually add support
  for cards based on GEM to gem(4). This mainly consists of adding support
  for the TBI of these chips. Along with this the PHY selection code was
  rewritten to hardcode the PHY number for certain configurations as for
  example the PHY of the on-board ERI of Blade 1000 shows up twice causing
  no link as the second incarnation is isolated.
  These changes were ported from OpenBSD with some additional improvements
  and modulo some bugs.
o Add code to if_gem_pci.c allowing to read the MAC-address from the VPD on
  systems without Open Firmware.
  This is an improved version of my variant of the respective code in
  if_hme_pci.c
o Now that gem(4) is MI enable it for all archs.

Pointed out by:	yongari [1]
Suggested by:	rwatson [2], yongari [3]
Tested on:	i386 (GEM), powerpc (GMACs by marcel and yongari),
		sparc64 (ERI and GEM)
Reviewed by:	yongari
Approved by:	re (kensmith)
2007-09-26 21:14:18 +00:00
Marius Strobl
e87137e133 - In gem_bitwait() check that the bit clears/was set in the content
of the register rather than in the offset describing the register.
- In gem_reset_rx() let gem_bitwait() check for the Rx reset bit
  rather than the Tx reset bit to clear.

Obtained from:	OpenBSD (same/similar bugs being fixed)
2007-06-16 23:27:59 +00:00
Pyun YongHyeon
12fb0330d8 o Implemented Rx/Tx checksum offload. The simple checksum logic in
GEMs is unable to discriminate UDP from TCP packets such that
  it can generate 0x0000 checksum value for the UDP datagram. So the
  UDP checksum offload was disabled by default. You can enable it
  by setting link0 flag with ifconfig(8).
o bus_dma(9) clean up. It now correctly set number of required DMA
  segments/size and removed incorrect use of BUS_DMA_ALLOCNOW flag
  in static allocations done via bus_dmamem_alloc(9).
o Implemented ALTQ(9) support.
o Implemented Tx side bus_dmamap_load_mbuf_sg(9) which can remove
  several book keeping chores orginated from call-back mechanism.
  Therefore gem_txdma_callback() was removed and its functionality
  was reimplemented in gem_load_txmbuf().
o Don't set GEM_TD_START_OF_PACKET flag until all remaining mbuf
  chains are set. I think it was a long standing bug and it caused
  fluctuating interrupts/CPU usage patterns while netperf test
  is in progress. Previously it seems that we race with the device.
  Because I don't have a documentation for GEM I'm not sure this is
  correct but almost all other documentations I have stated this
  implications on setting SOP mark in descriptor ring(e.g. hme(4)).
o Borrowed gem_defrag() from ath(4) which is supposed to be much
  faster than m_defrag(9) since it's not need to defrag all
  mbuf chains.
o gem_load_txmbuf() was changed to allow passed mbuf chains to free.
  Caller of gem_load_txmbuf() correctly handles freed mbuf chains.
o In gem_start_locked(), added checks for availability of Tx
  descriptors before trying to load DMA maps which could save CPU
  cycles when number of available descriptors are low. Also, simplyfy
  IFF_DRV_OACTIVE detection logic.
o Removed hard-coded function names in CTR macros and replaced it
  with __func__.
o Moved statistics counter register access to gem_tick() to reduce
  number of PCI bus accesses. There is no reason to update statistics
  counters in interrupt handler.
o Removed unnecessary call of gem_start_locked() in gem_ioctl().

Reviewed by:	grehan (initial version), marius (with improvements and suggestions)
Tested by:	grehan (ppc), marius(sparc64)
2007-06-04 06:01:04 +00:00
Poul-Henning Kamp
e1bb13cd30 Since if_gem is being touted as one of our more architecturally
correct network drivers with respect to busmaster DMA, go over it
with at duster to make other aspects of it a role model:

Eliminate the pci specific softc, it serves no rational purpose.

Use convenience resource allocation/deallocation functions to save
code and errorhandling.

Switch from bus_space_{read|write}_%u() to bus_{read|write}_%u()
functions and forget about tags and handles, the resource will know
about those, should they be needed.  This also eliminates a number
of inconsistently named local variables.
2007-05-04 19:15:28 +00:00
Paolo Pisati
ef544f6312 o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@
2007-02-23 12:19:07 +00:00
Marius Strobl
8cb37876d6 - Use the gem_tick() callout instead of if_slowtimo() for driving
gem_watchdog() in order to avoid races accessing if_timer.
  While at it relax the watchdog a bit by reloading it in gem_tint()
  if there are still packets enqueued.
- Don't bother to set if_mtu to ETHERMTU, ether_ifattach() does that.
- Fix inconsistencies in prototypes.
2006-12-06 02:04:25 +00:00
John-Mark Gurney
378f231e7d add a newbus method for obtaining the bus's bus_dma_tag_t... This is
required by arches like sparc64 (not yet implemented) and sun4v where there
are seperate IOMMU's for each PCI bus...  For all other arches, it will
end up returning NULL, which makes it a no-op...

Convert a few drivers (the ones we've been working w/ on sun4v) to the
new convection...  Eventually all drivers will need to replace the parent
tag of NULL, w/ bus_get_dma_tag(dev), though dev is usually different for
each driver, and will require hand inspection...

Reviewed by:	scottl (earlier version)
2006-09-03 00:27:42 +00:00
Sam Leffler
ff046a6c6b add missed calls to bpf_peers_present 2006-06-02 23:14:40 +00:00
Ruslan Ermilov
342ed5d948 Fix -Wundef warnings found when compiling i386 LINT, GENERIC and
custom kernels.
2005-12-05 11:58:35 +00:00
Ruslan Ermilov
4a0d6638b3 - Store pointer to the link-level address right in "struct ifnet"
rather than in ifindex_table[]; all (except one) accesses are
  through ifp anyway.  IF_LLADDR() works faster, and all (except
  one) ifaddr_byindex() users were converted to use ifp->if_addr.

- Stop storing a (pointer to) Ethernet address in "struct arpcom",
  and drop the IFP2ENADDR() macro; all users have been converted
  to use IF_LLADDR() instead.
2005-11-11 16:04:59 +00:00
Marius Strobl
1f317bf968 - In gem_ioctl() move the call to ether_ioctl() to the default case of
the switch statement in order to make this driver more like other
  Ethernet NIC drivers.
- In gem_attach() call gem_stop() in addition to gem_reset() to make
  sure the chip actually is stopped and not just reset.
- In gem_stop() also stop the gem_rint_timeout() callout in case the
  driver is compiled with GEM_RINT_TIMEOUT defined.

Merge some locking improvements from hme(4):
- Use callout_init_mtx() to close races between gem_stop() and gem_tick()
  as weel as gem_stop() and gem_rint() in case the driver is compiled
  with GEM_RINT_TIMEOUT defined.
- Use the driver lock instead of Giant in a bus dma callback.
- Lock the driver lock around mii operations.
- Cleanup locking in gem_ioctl().
- Remove redundant assertions that the driver lock is not held in
  gem_attach() and gem_detach() since mtx_lock() will assert that
  already since the driver lock is not recursive.
- Add callout_drain()'s to gem_detach() after calling gem_stop() to make
  sure that if softclock is running on another CPU and is blocked on our
  driver lock, we will wait until it has acquired the lock, seen that it
  was cancelled, dropped the lock, and awakened us so that we can safely
  destroy the mutex.
2005-09-18 13:23:19 +00:00
Marius Strobl
00d12766ef - Allow for VLAN-sized frames and set IFCAP_VLAN_MTU.
- On resume all registers have to be initialized again like after
  power-on so reset sc_inited in gem_suspend() in order get all of
  the registers set next time gem_init_regs() is called.
- On at least some ERI and GEM revisions GEM_MAC_RX_OVERFLOW happen
  often due to a silicon bug and re-initializing is all we can do
  about these errors so make handling them non-verbose.
- Remove a superfluous memset(3) call in gem_meminit(), all elements
  are initialized to 0 anyway.

MFC after:	1 week
2005-08-28 15:07:30 +00:00
Robert Watson
13f4c340ae Propagate rename of IFF_OACTIVE and IFF_RUNNING to IFF_DRV_OACTIVE and
IFF_DRV_RUNNING, as well as the move from ifnet.if_flags to
ifnet.if_drv_flags.  Device drivers are now responsible for
synchronizing access to these flags, as they are in if_drv_flags.  This
helps prevent races between the network stack and device driver in
maintaining the interface flags field.

Many __FreeBSD__ and __FreeBSD_version checks maintained and continued;
some less so.

Reviewed by:	pjd, bz
MFC after:	7 days
2005-08-09 10:20:02 +00:00
Robert Watson
13b203d0d7 Modify device drivers supporting multicast addresses to lock if_addr_mtx
over iteration of their multicast address lists when synchronizing the
hardware address filter with the network stack-maintained list.

Problem reported by:	Ed Maste (emaste at phaedrus dot sandvine dot ca>
MFC after:		1 week
2005-08-03 00:18:35 +00:00
Marius Strobl
8cfaff7d0b Remove NOP spl*() calls and add locking (making gem(4) MPSAFE).
Based on:	hme(4)
Reviewed by:	yongari
Tested on:	powerpc(grehan), sparc64
2005-07-24 18:45:15 +00:00
Marius Strobl
c3d5598aa8 - Wrap the handler and associated code for collecting completed RX
descriptors that are still marked owned in #ifdef GEM_RINT_TIMEOUT
  instead of #if 0 for convenience.
- Remove stale code and comment about relying on the preset XIF config.
- In case of a watchdog timeout call the init function instead of just
  the start function so the chip is properly reset.

Merge from hme(4):
- Convert to use bus_dmamap_load_mbuf_sg() for loading RX buffers.
- Protect from a duplicate mbuf free panic in case the DMA engine hangs.

Reviewed by:	yongari
Tested on:	powerpc(grehan), sparc64
MFC after:	1 week
2005-07-24 18:12:31 +00:00
Brooks Davis
25bd46d0e7 Stop the interface before detaching and freeing it, rather than after.
Reported by:	marius
2005-06-12 15:33:45 +00:00
Brooks Davis
fc74a9f93a Stop embedding struct ifnet at the top of driver softcs. Instead the
struct ifnet or the layer 2 common structure it was embedded in have
been replaced with a struct ifnet pointer to be filled by a call to the
new function, if_alloc(). The layer 2 common structure is also allocated
via if_alloc() based on the interface type. It is hung off the new
struct ifnet member, if_l2com.

This change removes the size of these structures from the kernel ABI and
will allow us to better manage them as interfaces come and go.

Other changes of note:
 - Struct arpcom is no longer referenced in normal interface code.
   Instead the Ethernet address is accessed via the IFP2ENADDR() macro.
   To enforce this ac_enaddr has been renamed to _ac_enaddr.
 - The second argument to ether_ifattach is now always the mac address
   from driver private storage rather than sometimes being ac_enaddr.

Reviewed by:	sobomax, sam
2005-06-10 16:49:24 +00:00
Warner Losh
538565c4a5 Use BUS_PROBE_DEFAULT for pci probe return value 2005-03-05 18:30:12 +00:00
Warner Losh
098ca2bda9 Start each of the license/copyright comments with /*-, minor shuffle of lines 2005-01-06 01:43:34 +00:00
Robert Watson
268f132afc Since if_gem doesn't contain locking or run with INTR_MPSAFE, mark
the interface as IFF_NEEDSGIANT so if_start is run holding Giant.
2004-08-13 23:11:24 +00:00
Marius Strobl
c240bd8cf8 - Remove a variable no longer used after the conversion to ether_crc32_le().
- While here, save on another one no longer really necessary after the
  conversion.
2004-06-10 00:04:16 +00:00
Christian Weisgerber
0e939c0cea Replace handrolled CRC calculation with ether_crc32_[lb]e(). 2004-06-09 14:34:04 +00:00
Poul-Henning Kamp
186f2b9e04 Add missing <sys/module.h> includes currently relying on nested include
in <sys/kernel.h>
2004-06-03 06:10:02 +00:00
Maxime Henrion
866a788cc2 We don't need to initialize if_output, ether_ifattach() does it
for us.
2004-05-23 16:11:53 +00:00