Note that ULong in this code is actually defined as an unsigned integer across
all arches so that the gdtoa() function always processes 32 bit data
despite the unfortunate naming of "ULong".
libraries had not had their versions bumped relative to 6.3-REL but
had indeed been changed. We need to bump their version so they can be
properly added to the compat6x port:
libasn1.so.8 libgssapi.so.8 libhdb.so.8 libkadm5clnt.so.8
libkadm5srv.so.8 libkafs5.so.8 libkrb5.so.8 libobjc.so.2
MFC After: 1 day
doesn't use the default CFLAGS which contain -fno-strict-aliasing.
Until the code is cleaned up, just add -fno-strict-aliasing to the
CFLAGS of these for the tinderboxes' sake, allowing the rest of the
tree to have -Werror enabled again.
cause the build to fail because y.tab.c can have a more
recent modification time than y.tab.h, and the bad rule
relied on the opposite.
(The last write to y.tab.c by yacc(1) happens after the
last write to y.tab.h, according to truss(1).)
Reported by: kensmith
fixes a NULL-dereference of curthread when libstdc+ initializes
the exception handling globals on archs we can't use GNU TLS due
to lack of support in binutils 2.15 (i.e. arm and sparc64), yet,
thus making threaded C++ programs compiled with GCC 4.2.1 work
again on these archs.
Reviewed by: davidxu
MFC after: 3 days
to tune pthread mutex performance:
1. LIBPTHREAD_SPINLOOPS
If a pthread mutex is being locked by another thread, this environment
variable sets total number of spin loops before the current thread
sleeps in kernel, this saves a syscall overhead if the mutex will be
unlocked very soon (well written application code).
2. LIBPTHREAD_YIELDLOOPS
If a pthread mutex is being locked by other threads, this environment
variable sets total number of sched_yield() loops before the currrent
thread sleeps in kernel. if a pthread mutex is locked, the current thread
gives up cpu, but will not sleep in kernel, this means, current thread
does not set contention bit in mutex, but let lock owner to run again
if the owner is on kernel's run queue, and when lock owner unlocks the
mutex, it does not need to enter kernel and do lots of work to resume
mutex waiters, in some cases, this saves lots of syscall overheads for
mutex owner.
In my practice, sometimes LIBPTHREAD_YIELDLOOPS can massively improve performance
than LIBPTHREAD_SPINLOOPS, this depends on application. These two environments
are global to all pthread mutex, there is no interface to set them for each
pthread mutex, the default values are zero, this means spinning is turned off
by default.
is also implemented in glibc and is used by a number of existing
applications (mysql, firefox, etc).
This mutex type is a default mutex with the additional property that
it spins briefly when attempting to acquire a contested lock, doing
trylock operations in userland before entering the kernel to block if
eventually unsuccessful.
The expectation is that applications requesting this mutex type know
that the mutex is likely to be only held for very brief periods, so it
is faster to spin in userland and probably succeed in acquiring the
mutex, than to enter the kernel and sleep, only to be woken up almost
immediately. This can help significantly in certain cases when
pthread mutexes are heavily contended and held for brief durations
(such as mysql).
Spin up to 200 times before entering the kernel, which represents only
a few us on modern CPUs. No performance degradation was observed with
this value and it is sufficient to avoid a large performance drop in
mysql performance in the heavily contended pthread mutex case.
The libkse implementation is a NOP.
Reviewed by: jeff
MFC after: 3 days
This can only happen on 32-bit systems when you're reading
an uncompressed archive and the skip request is an exact
multiple of 4G (e.g., skipping a tar entry with an 8G body).
The symptom is that the read_ahead() ends up returning zero
bytes, and the extraction stops with a premature end-of-file.
Using '1' here is more correct anyway, as it allows read_ahead()
to function opportunistically and minimize copying.
MFC after: 5 days
kthread_add() takes the same parameters as the old kthread_create()
plus a pointer to a process structure, and adds a kernel thread
to that process.
kproc_kthread_add() takes the parameters for kthread_add,
plus a process name and a pointer to a pointer to a process instead of just
a pointer, and if the proc * is NULL, it creates the process to the
specifications required, before adding the thread to it.
All other old kthread_xxx() calls return, but act on (struct thread *)
instead of (struct proc *). One reason to change the name is so that
any old kernel modules that are lying around and expect kthread_create()
to make a process will not just accidentally link.
fix top to show kernel threads by their thread name in -SH mode
add a tdnam formatting option to ps to show thread names.
make all idle threads actual kthreads and put them into their own idled process.
make all interrupt threads kthreads and put them in an interd process
(mainly for aesthetic and accounting reasons)
rename proc 0 to be 'kernel' and it's swapper thread is now 'swapper'
man page fixes to follow.
on i386 and amd64 machines. The overall process is that /boot/pmbr lives
in the PMBR (similar to /boot/mbr for MBR disks) and is responsible for
locating and loading /boot/gptboot. /boot/gptboot is similar to /boot/boot
except that it groks GPT rather than MBR + bsdlabel. Unlike /boot/boot,
/boot/gptboot lives in its own dedicated GPT partition with a new
"FreeBSD boot" type. This partition does not have a fixed size in that
/boot/pmbr will load the entire partition into the lower 640k. However,
it is limited in that it can only be 545k. That's still a lot better than
the current 7.5k limit for boot2 on MBR. gptboot mostly acts just like
boot2 in that it reads /boot.config and loads up /boot/loader. Some more
details:
- Include uuid_equal() and uuid_is_nil() in libstand.
- Add a new 'boot' command to gpt(8) which makes a GPT disk bootable using
/boot/pmbr and /boot/gptboot. Note that the disk must have some free
space for the boot partition.
- This required exposing the backend of the 'add' function as a
gpt_add_part() function to the rest of gpt(8). 'boot' uses this to
create a boot partition if needed.
- Don't cripple cgbase() in the UFS boot code for /boot/gptboot so that
it can handle a filesystem > 1.5 TB.
- /boot/gptboot has a simple loader (gptldr) that doesn't do any I/O
unlike boot1 since /boot/pmbr loads all of gptboot up front. The
C portion of gptboot (gptboot.c) has been repocopied from boot2.c.
The primary changes are to parse the GPT to find a root filesystem
and to use 64-bit disk addresses. Currently gptboot assumes that the
first UFS partition on the disk is the / filesystem, but this algorithm
will likely be improved in the future.
- Teach the biosdisk driver in /boot/loader to understand GPT tables.
GPT partitions are identified as 'disk0pX:' (e.g. disk0p2:) which is
similar to the /dev names the kernel uses (e.g. /dev/ad0p2).
- Add a new "freebsd-boot" alias to g_part() for the new boot UUID.
MFC after: 1 month
Discussed with: marcel (some things might still change, but am committing
what I have so far)
a module was loaded might make the pathname inaccurate.
I wonder if an inode reference should be stored with the pathname
to allow a validity check?
Suggested by: rwatson@
threading library.
- Now that libpthread is a symlink, it's no longer possible
to link applications with libpthread and have libmap.conf(5)
select the desired threading library; applications will be
linked to the default threading library, libkse or libthr.
Remove an obsolete paragraph.
- Mention that improvements can be seen compared to libkse.
Reviewed by: deischen, davidxu
for kldstat(2).
This allows libdtrace to determine the exact file from which
a kernel module was loaded without having to guess.
The kldstat(2) API is versioned with the size of the
kld_file_stat structure, so this change creates version 2.
Add the pathname to the verbose output of kldstat(8) too.
MFC: 3 days
aligned, GCC 4.2.1 also generates code for sendudp() that assumes
this alignment. GCC 4.2.1 however doesn't 32-bit align wbuf, causing
the loader to crash due to an unaligned access of wbuf in sendudp()
when netbooting sparc64. Solve this by specifying wbuf as packed and
32-bit aligned, too. As for lastdata and readudp() this currently is
no issue when compiled with GCC 4.2.1, though give lastdata the same
treatment as wbuf for consistency and possibility of being affected
in the future. [1]
- Sprinkle const on a lookup table.
Reported by: marcel [1]
Submitted by: yongari [1]
Reviewed by: marcel [1]
MFC after: 5 days
test MK_INSTALLLIB, users can set WITHOUT_INSTALLLIB. The old
NO_INSTALLLIB is still supported as several makefiles set it.
- While here, fix an install when instructed not to install libs
(usr.bin/lex/lib/Makefile).
PR: bin/114200
Submitted by: Henrik Brix Andersen
This commit includes the following core components:
* sample configuration file for sensorsd
* rc(8) script and glue code for sensorsd(8)
* sysctl(3) doc fixes for CTL_HW tree
* sysctl(3) documentation for hardware sensors
* sysctl(8) documentation for hardware sensors
* support for the sensor structure for sysctl(8)
* rc.conf(5) documentation for starting sensorsd(8)
* sensor_attach(9) et al documentation
* /sys/kern/kern_sensors.c
o sensor_attach(9) API for drivers to register ksensors
o sensor_task_register(9) API for the update task
o sysctl(3) glue code
o hw.sensors shadow tree for sysctl(8) internal magic
* <sys/sensors.h>
* HW_SENSORS definition for <sys/sysctl.h>
* sensors display for systat(1), including documentation
* sensorsd(8) and all applicable documentation
The userland part of the framework is entirely source-code
compatible with OpenBSD 4.1, 4.2 and -current as of today.
All sensor readings can be viewed with `sysctl hw.sensors`,
monitored in semi-realtime with `systat -sensors` and also
logged with `sensorsd`.
Submitted by: Constantine A. Murenin <cnst@FreeBSD.org>
Sponsored by: Google Summer of Code 2007 (GSoC2007/cnst-sensors)
Mentored by: syrinx
Tested by: many
OKed by: kensmith
Obtained from: OpenBSD (parts)
for wide characters locales in the argument range >= 0x80 - they may
return false positives.
Example 1: for UTF-8 locale we currently have:
iswspace(0xA0)==1 and isspace(0xA0)==1
(because iswspace() and isspace() are the same code)
but must have
iswspace(0xA0)==1 and isspace(0xA0)==0
(because there is no such character and all others in the range
0x80..0xff for the UTF-8 locale, it keeps ASCII only in the single byte
range because our internal wchar_t representation for UTF-8 is UCS-4).
Example 2: for all wide character locales isalpha(arg) when arg > 0xFF may
return false positives (must be 0).
(because iswalpha() and isalpha() are the same code)
This change address this issue separating single byte and wide ctype
and also fix iswascii() (currently iswascii() is broken for
arguments > 0xFF).
This change is 100% binary compatible with old binaries.
Reviewied by: i18n@
success and zero pid from pidfile_read(). Return EAGAIN instead. Sleep
up to three times for 5 ms while waiting for pidfile to be written.
mount(8) does the kill(mountpid, SIGHUP). If mountd pidfile is truncated,
that would result in the SIGHUP delivered to the mount' process group
instead of the mountd.
Found and analyzed by: Peter Holm
Tested by: Peter Holm, kris
Reviewed by: pjd
MFC after: 1 week
In particular, the previous code led to archives that had
non-empty bodies following directory entries. Not a fatal
problem, as bsdtar and GNU cpio are both happy to just skip
this bogus data, but it still shouldn't be there.
MFC after: 3 days
Return EOF immediately if an entry in a ZIP archive has no body.
In particular, the latter issue was causing bsdtar to emit spurious
warnings when extracting directory entries from ZIP archives.
MFC after: 3 days
the threading libraries is built. This simplifies the
logic in makefiles that need to check if the pthreads
support is present. It also fixes a bug where we would
build a threading library that we shouldn't have built:
for example, building with WITHOUT_LIBTHR and the default
value of DEFAULT_THREADING_LIB (libthr) would mistakenly
build the libthr library, but not install it.
Approved by: re (kensmith)
the threading libraries is built. This simplifies the
logic in makefiles that need to check if the pthreads
support is present. It also fixes a bug where we would
build a threading library that we shouldn't have built:
for example, building with WITHOUT_LIBTHR and the default
value of DEFAULT_THREADING_LIB (libthr) would mistakenly
build the libthr library, but not install it.
Approved by: re (kensmith)
to an int to remove the warning from using a size_t variable on 64-bit
platforms.
Submitted by: Xin LI <delphij@FreeBSD.org>
Approved by: wes
Approved by: re (kensmith)
as they would have been translated from partitions of type "GPT".
This fixes sysinstall, now that geom_part has taken over from
geom_gpt.
Approved by: re (kensmith)
number of bytes written, even when used to write files to
disk. Extend the test suite to verify the correct return
values for archive_write_data() and archive_write_data_block().
Thanks to: Bruce Mah, for stepping in promptly to back out the
earlier broken version of this fix
Thanks to: Colin Percival, for pointing out the correct fix
MFC after: 5 days
Approved by: re (ksmith)
Pointy hat: \me
most noticably the incorrect extraction of files by bsdtar.
This commit reverts:
src/lib/libarchive/archive_write_disk.c 1.15
src/lib/libarchive/test/test_write_disk.c 1.4
Approved by: re (implicitly)
(when used to restore files to disk) to match:
* The documentation
* The return values of this function when used
to write files into an archive.
Approved by: re (bmah)
Pointy hat: \me
MFC after: 5 days
- p_sflag was mostly protected by PROC_LOCK rather than the PROC_SLOCK or
previously the sched_lock. These bugs have existed for some time.
- Allow swapout to try each thread in a process individually and then
swapin the whole process if any of these fail. This allows us to move
most scheduler related swap flags into td_flags.
- Keep ki_sflag for backwards compat but change all in source tools to
use the new and more correct location of P_INMEM.
Reported by: pho
Reviewed by: attilio, kib
Approved by: re (kensmith)
inactive variables should cause a rebuild of environ, otherwise, exec()'d
processes will be missing a variable in environ that has been unset then
set.
Submitted by: Taku Yamamoto <taku@tackymt.homeip.net>
Reviewed by: ache
Approved by: wes (mentor)
Approved by: re (kensmith)
with section header tables residing in between other sections.
Introduce additional checks for overlaps between section data and
the section header table when the application is performing section
layout.
Document additional error returns.
Reported by: Kai Wang <kaiw27 at gmail dot com>
Approved by: re (rwatson)
Reported by: phk
- While here, check the unit before calculating the actually number.
This way we can return EINVAL for invalid unit instead of ERANGE.
Approved by: re (kensmith)
a number in human-readable form is converted to int64_t, for example:
123b -> 123
10k -> 10240
16G -> 17179869184
First version submitted by: Eric Anderson <anderson@freebsd.org>
Approved by: re (bmah)
GNU tar 1.17's implementation of --posix --sparse,
at the cost of losing compatibility with GNU tar 1.16.
Fortunately, the 1.17 implementation actually makes sense,
so the libarchive code is now a bit more straightforward
than before.
Background: GNU tar 1.16 defined a new way to store
sparse files in --posix archives. Unfortunately,
the implementation incorrectly inserted several
blocks of null padding after each such entry.
As a result, non-GNU tar implementations saw the
archive as truncated after any sparse entry.
This was fixed in GNU tar 1.17 at the cost of
losing compatibility with GNU tar 1.16 for this
new format (which is not the default, so hopefully
rarely used). Libarchive recently gained support
for reading the GNU tar 1.16 formats; this commit
updates it to read the GNU tar 1.17 variant instead.
Approved by: re (ksmith for libarchive portion)
Approved by: re (blanket for libarchive_test portion)
MFC after: 5 days
owner restore is not requested. If you ask
for permissions to be restored but not owner,
you will now get no error if suid/sgid bits
cannot be set. (It's a security hole to restore
suid/sgid bits if the owner/group aren't restored.)
This fixes an obscure problem where a simple
"tar -xf" with no other options will sometimes
fail gratuitously because of suid/sgid bits.
This is causing occasional problems for people
using bsdtar as a drop-in replacement for
"that other tar program." ;-)
Note: If you do ask for owner restore, then suid/sgid
restore failures still issue an error. This
only suppresses the error in the case where an
suid/sgid bit restore fails because of an owner
mismatch and owner restore was not requested.
Approved by: re (bmah)
MFC after: 7 days
In particular:
* Include a second entry in all of the test archives (to catch errors
with intermediate padding)
* Test the GNU tar 1.17 version of "posix sparse format 1.0"
instead of the GNU tar 1.16 version (the latter is no longer
supported by GNU tar).
Right now, libarchive fails this test because I originally
implemented the GNU tar 1.16 version of "posix sparse format 1.0".
I'll fix libarchive shortly.
Approved by: re (blanket, libarchive testing)
Previously, any parse error will result in the calling program exiting with an
unpleasant message. This change will cause libdisk to issue a warning and
ignore lines it cannot parse instead of bluntly terminating the unfortunate
enough program.
This change will allow you to use sysinstall if you have a NTFS parition with
a space in the name (such as 'Win Xp'). In such a case, a line like the
following will appear in the kern.geom.conftxt output:
2 LABEL ntfs/Win Xp 209818635264 512 i 0 o 0
As the fields are space-separated, libdisk would go beserk and exit the program.
This would happen if using FreeBSD 7.0 snapshot images (as GEOM_LABEL is in
the installation kernel as well), thus making it impossible to install FreeBSD
without renaming your NTFS paritions.
Reported by: Dwight Berendse <dwight at berendse dot org>
Nod from: phk
Reviewed by: imp
Approved by: re (bmah), imp (mentor)
MFC after: 1 month
* Allow libarchive_test to compile on Interix again.
* Track the test name (not just line number) when counting skipped tests.
Thanks to: Joerg Sonnenberger
Approved by: re (blanket; libarchive testing)
- Fix addrs's error checking of sctp_sendx(3) when addrcnt is less than
SCTP_SMALL_IOVEC_SIZE
- re-add back inpcb_bind local address check bypass capability
- Fix it so sctp_opt_info is independant of assoc_id postion.
- Fix cookie life set to use MSEC_TO_TICKS() macro.
- asconf changes
o More comment changes/clarifications related to the old local address
"not" list which is now an explicit restricted list.
o Rename some functions for clarity:
- sctp_add/del_local_addr_assoc to xxx_local_addr_restricted()
- asconf related iterator functions to sctp_asconf_iterator_xxx()
o Fix bug when the same address is deleted and added (and removed from
the asconf queue) where the ifa is "freed" twice refcount wise,
possibly freeing it completely.
o Fix bug in output where the first ASCONF would not go out after the
last address is changed (e.g. only goes out when retransmitted).
o Fix bug where multiple ASCONFs can be bundled in the same packet with
the and with the same serial numbers.
o Fix asconf stcb iterator to not send ASCONF until after all work
queue entries have been processed.
o Change behavior so that when the last address is deleted (auto asconf
on a bound all endpoint) no action is taken until an address is
added; at that time, an ASCONF add+delete is sent (if the assoc
is still up).
o Fix local address counting so that address scoping is taken into
account.
o #ifdef SCTP_TIMER_BASED_ASCONF the old timer triggered sending
of ASCONF (after an RTO). The default now is to send
ASCONF immediately (except for the case of changing/deleting the
last usable address).
Approved by: re(ken smith)@freebsd.org
yp_next as revision 1.50 did. This should fix, or at least very much
reduce the risk of, NIS timing out due to UDP packet loss for NIS
functions.
See also revision 1.50 for more details about the general problem.
Tested by: nosedive, freefall, hub, mx1, brooks
MFC after: 1 week
Approved by: re (mux)
pam_sm_open_session(), avoiding false negatives when no tty is present.
Submitted by: Todd C. Miller <millert@courtesan.com>
Approved by: re (rwatson)
MFC after: 2 weeks
or replace (i.e., zdump) the environment after a call to setenv(), putenv()
or unsetenv() has been made, a few changes were made.
- getenv() will return the value from the new environ array.
- setenv() was split into two functions: __setenv() which is most of the
previous setenv() without checks on the name and setenv() which
contains the checks before calling __setenv().
- setenv(), putenv() and unsetenv() will unset all previous values and
call __setenv() on all entries in the new environ array which in turn
adds them to the end of the envVars array. Calling __setenv() instead
of setenv() is done to avoid the temporary replacement of the '=' in a
string with a NUL byte. Some strings may be read-only data.
Added more regression checks for clearing the environment array.
Replaced gettimeofday() with getrusage() in timing regression check for
better accuracy.
Fixed an off-by-one bug in __remove_putenv() in the use of memmove(). This
went unnoticed due to the allocation of double the number of environ
entries when building envVars.
Fixed a few spelling mistakes in the comments.
Reviewed by: ache
Approved by: wes
Approved by: re (kensmith)
couldn't allocate more memory for a string. Change
this so it returns NULL in that case, and update
all of its callers to handle the error. Some of
those callers can now return errors back to the
client instead of calling exit(3).
Approved by: re (bmah)
NET_NEEDS_GIANT, which will shortly be removed. This is done in a
away that it may be easily reattached to the build before 7.1 if
appropriate locking is added. Specifics:
- Don't install netatm include files
- Disconnect netatm command line management tools
- Don't build libatm
- Don't include ATM parts in rescue or sysinstall
- Don't install sample configuration files and documents
- Don't build kernel support as a module or in NOTES
- Don't build netgraph wrapper nodes for netatm
This removes the last remaining consumer of NET_NEEDS_GIANT.
Reviewed by: harti
Discussed with: bz, bms
Approved by: re (kensmith)
if there was more than one. In particular, this simplifies
test_tar_filenames.c, which has a tendency to be very noisy otherwise.
Approved by: re (blanket, libarchive testing)
- CMT_PF states added (w/sysctl to turn the PF version on)
- sctp_input.c had a missing incr of cookie case when the
auth was bad. This meant a free was called without an
increment to refcnt, added increment like rest of code.
- There was a case, unlikely, when the scope of the destination
changed (this is a TSNH case). In that case, it would not free
the alloc'ed asoc (in sctp_input.c).
- When listed addresses found a colliding cookie/Init, then
the collided upon tcb was not unlocked in sctp_pcb.c
- Add error checking on arguments of sctp_sendx(3) to prevent it from
referencing a NULL pointer.
- Fix an error return of sctp_sendx(3), it was returing
ENOMEM not -1.
- Get assoc id was changed to use the sanctified socket api
method for getting a assoc id (PEER_ADDR_INFO instead of
PEER_ADDR_PARAMS).
- Fix it so a peeled off socket will get a proper error return
if it trys to send to a different address then it is connected to.
- Fix so that select_a_stream can avoid an endless loop that
could hang a caller.
- time_entered (state set time) was not being set in all cases
to the time we went established.
Approved by: re(ken smith)
it now verifies that the returned blocks have the correct data
at the correct file offsets, ignoring any null padding that
may exist.
Approved by: re (blanket, libarchive test suite)
behavior with truncated or damaged pax archives. This
tests most of the cases covered by the recent security advisory.
Approved by: re (blanket, libarchive test suite)
archive_read_open_memory.c that tries to test border
cases. In particular, it copies over each returned block
so that formats or decompressors that read past the end
of a returned block will break.
Approved by: re (blanket, libarchive test suite)
tar archives, including a potentially exploitable buffer overflow.
Approved by: re (kensmith, security blanket)
Reviewed by: kientzle
Security: FreeBSD-SA-07:05.libarchive
ARCHIVE_VERSION_STAMP to selectively disable tests that don't
apply to that version; new "skipping()" function reports skipped
tests; modify final summary to report component test failures and
skips.
Note: I don't currently intend to MFC the test suite itself;
anyone interested should just checkout and use this version
of the test suite, which should work for any library version.
Approved by: re (Ken Smith, blanket)
of libarchive being used. I've been taking advantage of this
with a recent round of updates to libarchive_test so that it
can test older and newer versions of the library.
Approved by: re (Ken Smith)
call the pad-less versions of the corresponding syscalls if the running
kernel supports it. Check kern.osreldate once per program and cache the
result to select the appropriate syscall. This maintains userland
compatability with kernel.old's from quite a while back.
Approved by: re (kensmith)
syscalls, unless WITHOUT_SYSCALL_COMPAT is defined. The default case
will have the .c wrappers still. If you define WITHOUT_SYSCALL_COMPAT,
the .c wrappers will go away and libc will make direct syscalls.
After 7-stable starts, the direct syscall method will be default.
Approved by: re (kensmith)
particular:
SYSCALL() makes a syscall, with errno handling, and continues execution
directly after the macro in the non-error case.
RSYSCALL() is just like SYSCALL(), but returns after success.
Both SYSCALL(name) and RSYSCALL(name) export "__sys_name" as a strong
symbol, with "_name" and "name" as weak aliases.
PSEUDO() is just like RSYSCALL(), but skipping the "name" weak alias. It
still does "__sys_name" and "_name".
Change i386 to add errno handling to PSEUDO. The same for amd64 and
sparc64, with appear to have copied the behavior.
ia64 was correct (as was alpha). Just remove some apparently unused
variants of the macros. (untested!)
I believe powerpc is correct.
Fix arm to not export "name" from the PSEUDO case. Remove apparently
extra unused variants. (untested!)
The errno problem manifested on i386/amd64/sparc64 by having "PSEUDO"
classified syscalls return without setting errno. eg: "addr = mmap()"
could return with "addr" = 22 instead of setting errno to 22 and
returning -1.
Approved by: re (kensmith)
setenv(3) by tracking the size of the memory allocated instead of using
strlen() on the current value.
Convert all calls to POSIX from historic BSD API:
- unsetenv returns an int.
- putenv takes a char * instead of const char *.
- putenv no longer makes a copy of the input string.
- errno is set appropriately for POSIX. Exceptions involve bad environ
variable and internal initialization code. These both set errno to
EFAULT.
Several patches to base utilities to handle the POSIX changes from
Andrey Chernov's previous commit. A few I re-wrote to use setenv()
instead of putenv().
New regression module for tools/regression/environ to test these
functions. It also can be used to test the performance.
Bump __FreeBSD_version to 700050 due to API change.
PR: kern/99826
Approved by: wes
Approved by: re (kensmith)
one of the functions)
- Fixes the error return of sctp_get_opt, it was returning the errno not
-1.
Approved by: re@freebsd.org (Robert Watson)
Obtained from: Weongyo Jeong (weongyo.jeong@gmail.com)
skip() callback to skip over data when reading uncompressed
archives. This gets invoked, for example, during tar -t
or tar -x with a filename argument. The revised code
only calls [lf]seek() on regular files, instead of depending
on the kernel to return an error.
Thanks to: bde for explaining the implementation of lseek()
Thanks to: Daniel O'Connor for testing
Approved by: re (Ken Smith)
MFC after: 5 days
in errno) - Found by Weongyo Jeong
- Remove two extra un-needed memset() after calloc()'s - Found by
Weongyo Jeong
- Tightened up parameter requirement checking on input to
bindx/connectx per socket api spec.
Approved by: re@freebsd.org(Ken Smith)
- Fix a memory leak when a non v4/v6 address was passed in.
- Take out strange line that copy's back to the src array
incorrectly (corrupting the input array).
Approved by: re(bmah@freebsd.org)
Obtained from: Weongyo Jeong(weongyo.jeong@gmail.com)
assume yes unless seek has previously failed, but I fear I'll have to
avoid seeks under other circumstances. (For instance, tape drives on
FreeBSD seem to return garbage from lseek().) Also, optimize away
zero-byte skips.
When NGROUP_MAX is larger than NGRP the call used to fail. Now the call
succeedes, but only the first NGRP groups are actually used for authentication.
be passed as GSS_C_NO_OID in which case a default mech should be used.
This case was not handled and leads to core dumps when using nss_ldap.
Now use the first mech in this case. When there is no mechanism available
return an error (this part is taken from the PR).
PR: 113266
Submitted by: Eirik Nygaard <eirikald@pvv.ntnu.no> (partly)
- Add and document the KVM and KVM_SUPPORT options that
are needed for the ifmcstats(3) makefile
- Garbage collect unused variables
- Add missing inclusion of bsd.own.mk where needed
Approved by: kan (mentor)
Reviewed by: ru
and protocol-independent host mode multicast. The code is written to
accomodate IPv6, IGMPv3 and MLDv2 with only a little additional work.
This change only pertains to FreeBSD's use as a multicast end-station and
does not concern multicast routing; for an IGMPv3/MLDv2 router
implementation, consider the XORP project.
The work is based on Wilbert de Graaf's IGMPv3 code drop for FreeBSD 4.6,
which is available at: http://www.kloosterhof.com/wilbert/igmpv3.html
Summary
* IPv4 multicast socket processing is now moved out of ip_output.c
into a new module, in_mcast.c.
* The in_mcast.c module implements the IPv4 legacy any-source API in
terms of the protocol-independent source-specific API.
* Source filters are lazy allocated as the common case does not use them.
They are part of per inpcb state and are covered by the inpcb lock.
* struct ip_mreqn is now supported to allow applications to specify
multicast joins by interface index in the legacy IPv4 any-source API.
* In UDP, an incoming multicast datagram only requires that the source
port matches the 4-tuple if the socket was already bound by source port.
An unbound socket SHOULD be able to receive multicasts sent from an
ephemeral source port.
* The UDP socket multicast filter mode defaults to exclusive, that is,
sources present in the per-socket list will be blocked from delivery.
* The RFC 3678 userland functions have been added to libc: setsourcefilter,
getsourcefilter, setipv4sourcefilter, getipv4sourcefilter.
* Definitions for IGMPv3 are merged but not yet used.
* struct sockaddr_storage is now referenced from <netinet/in.h>. It
is therefore defined there if not already declared in the same way
as for the C99 types.
* The RFC 1724 hack (specify 0.0.0.0/8 addresses to IP_MULTICAST_IF
which are then interpreted as interface indexes) is now deprecated.
* A patch for the Rhyolite.com routed in the FreeBSD base system
is available in the -net archives. This only affects individuals
running RIPv1 or RIPv2 via point-to-point and/or unnumbered interfaces.
* Make IPv6 detach path similar to IPv4's in code flow; functionally same.
* Bump __FreeBSD_version to 700048; see UPDATING.
This work was financially supported by another FreeBSD committer.
Obtained from: p4://bms_netdev
Submitted by: Wilbert de Graaf (original work)
Reviewed by: rwatson (locking), silence from fenner,
net@ (but with encouragement)
hundreds of similar aliasing bugs, but all except this one seem to have
been fixed by Cygnus and/or NetBSD before the modified version of fdlibm
was imported into FreeBSD in 1994.
PR: standards/113147
Submitted by: Steve Kargl <sgk@troutmask.apl.washington.edu>
el.c 1.44, el.h 1.17, editline.3 1.53, histedit.h 1.31:
# add EL_GETFP, and EL_SETFP.
el.c 1.42, term.c 1.46, term.h 1.18, editline.3 1.52, histedit.h 1.29:
# - Add more readline functions, enough for gdb-6.5
# - Make el_get varyadic, and implement EL_GETTC.
# - XXX: the EL_SETTC api will change in the future.
Note: The latter change breaks the ABI of the el_get() function.
Approved by: re (kensmith)
instead of an authentication function. There are a design reason
and a practical reason for that. First, the module belongs in
account management because it checks availability of the account
and does no authentication. Second, there are existing and potential
PAM consumers that skip PAM authentication for good or for bad.
E.g., sshd(8) just prefers internal routines for public key auth;
OTOH, cron(8) and atrun(8) do implicit authentication when running
a job on behalf of its owner, so their inability to use PAM auth
is fundamental, but they can benefit from PAM account management.
Document this change in the manpage.
Modify /etc/pam.d files accordingly, so that pam_nologin.so is listed
under the "account" function class.
Bump __FreeBSD_version (mostly for ports, as this change should be
invisible to C code outside pam_nologin.)
PR: bin/112574
Approved by: des, re
really shouldn't be exported since they should be pulled from libgcc, but
the build of some applications is broken and they expect to see them in
libc. glibc exports these symbols, although Solaris doesn't appear to,
so export them for compatibility's sake.
After discussion with: kan
net: endhostdnsent is named _endhostdnsent and is
private to netdb family of functions.
posix1e: acl_size.c has been never compiled in,
so there's no "acl_size".
rpc: "getnetid" is a static function.
stdtime: "gtime" is #ifdef'ed out in the source.
some symbols are specific only to some architectures,
e.g., ___tls_get_addr is only defined on i386.
__htonl, __htons, __ntohl and __ntohs are no longer
functions, they are now (internal) defines in
<machine/endian.h>.
Submitted by: ru
involving moving the check for x == 0). The savings in cycles are
smaller for cbrtf() than for cbrt(), and positive in all measured cases
with gcc-3.4.4, but still very machine/compiler-dependent.
* "compression_program" support uses an external program
* Portability: no longer uses "struct stat" as a primary
data interchange structure internally
* Part of the above: refactor archive_entry to separate
out copy_stat() and stat() functions
* More complete tests for archive_entry
* Finish archive_entry_clone()
* Isolate major()/minor()/makedev() in archive_entry; remove
these from everywhere else.
* Bug fix: properly handle decompression look-ahead at end-of-data
* Bug fixes to 'ar' support
* Fix memory leak in ZIP reader
* Portability: better timegm() emulation in iso9660 reader
* New write_disk flags to suppress auto dir creation and not
overwrite newer files (for future cpio front-end)
* Simplify trailing-'/' fixup when writing tar and pax
* Test enhancements: fix various compiler warnings, improve
portability, add lots of new tests.
* Documentation: document new functions, first draft of
libarchive_internals.3
MFC after: 14 days
Thanks to: Joerg Sonnenberger (compression_program)
Thanks to: Kai Wang (ar)
Thanks to: Colin Percival (many small fixes)
Thanks to: Many others who sent me various patches and problem reports.
are installed twice (once in non-widec version, onec in widec version).
Headers with widec enabled are compatible with non-widec version
for libraries. However, if you do a repeat build/install, the curses.h
is always overwritten. The reason is that headers and statics libraries
are installed with -S option to preserve their mtime if no actual changes,
which saves time when doing incremental builds. The curses.h is installed
by non-widec ncurses first, then by widec ncurses. So next time, it happens
again. You see something like this:
# pwd
/usr/src/lib/ncurses
# make -s installincludes INSTALL="install -v"
===> ncurses (installincludes)
install: curses.h -> /usr/include/curses.h
===> ncursesw (installincludes)
install: curses.h -> /usr/include/curses.h
# make -s installincludes INSTALL="install -v"
===> ncurses (installincludes)
install: curses.h -> /usr/include/curses.h
===> ncursesw (installincludes)
install: curses.h -> /usr/include/curses.h
The solution is to disable installing headers in non-widec version. Now
you see this:
# pwd
/usr/src/lib/ncurses
# make -s installincludes INSTALL="install -v"
===> ncurses (installincludes)
===> ncursesw (installincludes)
# make -s installincludes INSTALL="install -v"
===> ncurses (installincludes)
===> ncursesw (installincludes)
For form/panel/menu libraries, the headers are the same for both version.
To be consistent with ncurses, I also disable the installation in non-widec
version.
Reported by: des
Reviewed by: ru
Thanks to: ru
Approved by: delphij (mentor)
MFC after: 2 weeks
"cache_size * sizeof(struct bucket)". The former is valid in C99 but can
confuse earlier compilers, while the latter is a standard idiom which all
C compilers understand.
Approved by: kientzle
field is const, and then employ __DECONST before getting into the kvm
code. This eliminates a gcc 4.2 warning about losing constification.
__DECONST advice from: sam
