Wes Peters
8373917257
Rename the file used to specify the nextboot to make it clear that this
...
is a loader configuration file and can be used for more than just a
kernel name.
Submitted by: Gordon Tetlow <gordont@gnf.org>
2002-04-26 22:32:15 +00:00
Wes Peters
1de372dcd4
Add a -k option to reboot to specify the kernel to boot next time
...
around. If the kernel boots successfully, the record of this kernel
is erased, it is intended to be a one-shot option for testing
kernels.
This could be improved by having the loader remove the record of
the next kernel to boot, it is currently removed in /etc/rc immediately
after disks are mounted r/w.
I'd like to MFC this before the 4.6 freeze unless there is violent
objection.
Reviewed by: Several on IRC
MFC after: 4 days
2002-04-26 07:31:04 +00:00
Pierre Beyssac
bc6d68df97
Add forgotten flag in flag lists.
...
PR: docs/36267 (partial)
Submitted by: Thomas Quinot <thomas.cuivre.fr.eu.org>
2002-03-25 10:45:28 +00:00
Pierre Beyssac
038148d678
Add option -n to i386 boot2 to disallow boot interruption by keypress.
...
PR: i386/36016
Submitted by: Thomas Quinot <thomas@cuivre.fr.eu.org>
Reviewed by: rnordier
MFC after: 1 week
2002-03-23 19:40:27 +00:00
Robert Nordier
8a1917d017
Clarify the cylinder > 1023 issue, now that EDD support is automatic.
...
Also drop a note about undocumented features that was intended to
cover the since-documented slice-selection syntax.
2002-03-13 19:00:19 +00:00
Ruslan Ermilov
cd6ab711b3
Document the "slice" syntax.
...
Prodded by: ambrisko
2002-03-13 12:30:46 +00:00
Ruslan Ermilov
9662d32c73
Implement -m and -p loader(8) "boot" command options in boot2.
...
(This is more useful for 4.x where boot blocks can still load
kernels, modulo the PR kern/17422.)
2002-03-13 11:03:36 +00:00
Ruslan Ermilov
e237860a3c
mdoc(7) police: add -p to the synopsis line as well.
2001-12-14 15:03:32 +00:00
Guido van Rooij
28703190c5
Add new boot flag to i386 boot: -p.
...
This flag adds a pausing utility. When ran with -p, during the kernel
probing phase, the kernel will pause after each line of output.
This pausing can be ended with the '.' key, and is automatically
suspended when entering ddb.
This flag comes in handy at systems without a serial port that either hang
during booting or reser.
Reviewed by: (partly by jlemon)
MFC after: 1 week
2001-12-10 20:02:22 +00:00
David E. O'Brien
2d68bf45bf
Default to WARNS=2.
...
Binary builds that cannot handle this must explicitly set WARNS=0.
Reviewed by: mike
2001-12-04 02:19:58 +00:00
Ruslan Ermilov
69f568ec4d
Use ${MACHINE}, it works with cross-builds.
2001-09-12 12:21:08 +00:00
Ruslan Ermilov
753d686d34
mdoc(7) police: s/BSD/.Bx/ where appropriate.
2001-08-14 10:01:54 +00:00
Ruslan Ermilov
c4d9468ea0
mdoc(7) police:
...
Avoid using parenthesis enclosure macros (.Pq and .Po/.Pc) with plain text.
Not only this slows down the mdoc(7) processing significantly, but it also
has an undesired (in this case) effect of disabling hyphenation within the
entire enclosed block.
2001-08-07 15:48:51 +00:00
Dima Dorfman
7ebcc426ef
Remove whitespace at EOL.
2001-07-15 07:53:42 +00:00
Dima Dorfman
8b032500b6
Constify and set WARNS=2.
...
Submitted by: Mike Barcroft <mike@q9media.com>
2001-07-15 05:44:23 +00:00
Dima Dorfman
cafefe8c1b
Include missing header files which define functions for which gcc has
...
builtins (e.g., exit, strcmp).
2001-06-24 23:04:23 +00:00
Dima Dorfman
a910f192bb
Remove duplicate words.
2001-06-24 01:34:38 +00:00
Nik Clayton
6714dac4b4
Remove the "undocumented" comment in re lflag.
2001-05-24 09:28:59 +00:00
Nik Clayton
0ee76202d0
Document the -l option.
...
PR: docs/27440
Submitted by: Flix-Antoine Paradis <reel@sympatico.ca>
2001-05-24 09:28:05 +00:00
Ruslan Ermilov
eb0838029f
mdoc(7) police: normalize .Nd.
2001-04-18 15:54:10 +00:00
Ruslan Ermilov
0a5779d45b
- Backout botched attempt to introduce MANSECT feature.
...
- MAN[1-9] -> MAN.
2001-03-26 14:33:27 +00:00
Ian Dowse
85ae580ccb
Reboot(8) normally waits 5 seconds after sending SIGTERMs to all
...
processes and then sends SIGKILLs. If a lot of processes are swapped
out, this delay may not be long enough, so processes such as an X
server may be killed before they have had time to clean up properly.
Make this delay more dynamic by waiting up to 60 seconds for swap
page-in activity to end. While I'm here, ANSIfy and remove a
`register' specifier.
2001-03-20 17:22:48 +00:00
Ruslan Ermilov
d0353b836e
mdoc(7) police: split punctuation characters + misc fixes.
2001-02-01 16:38:02 +00:00
Ruslan Ermilov
1252c1bb05
Prepare for mdoc(7)NG.
2000-12-18 15:16:24 +00:00
Ruslan Ermilov
7c7fb079b9
mdoc(7) police: use the new features of the Nm macro.
2000-11-20 16:52:27 +00:00
Tim Vanderhoek
042f27bd00
.Xr boot0cfg 8 ,
...
PR: misc/18267 (Usov Alexander <[3]usov@ups.kiev.ua>)
2000-05-13 14:41:04 +00:00
Joseph Koshy
dba060d3e9
The new boot code uses ad' for ATA disks, not
wd'. Correct the
...
manual page.
2000-03-03 09:51:45 +00:00
Sheldon Hearn
ef8f7ac935
Remove single-space hard sentence breaks. These degrade the quality
...
of the typeset output, tend to make diffs harder to read and provide
bad examples for new-comers to mdoc.
2000-03-01 11:27:47 +00:00
Alexey Zelkin
08ad04ce42
Add .Nm fastboot' and
.Nm fasthalt' to NAME section.
2000-01-10 12:24:47 +00:00
John Polstra
85c981cc3f
Add a "-d" option which causes the system to generate a crash dump.
1999-11-21 21:52:40 +00:00
Alexey Zelkin
e57c888f2b
Sync with reallity (USERCONFIG_BOOT option was removed long time ago)
...
mdoc(7)'fy
1999-10-15 12:50:18 +00:00
Peter Wemm
7f3dea244c
$Id$ -> $FreeBSD$
1999-08-28 00:22:10 +00:00
Kazutaka YOKOTA
688db407dc
Remove reference to the obsoleted COMCONSOLE option.
...
Pointed out by: Crist J. Clark <cjc@cc942873-a.ewndsr1.nj.home.com>
1999-07-06 11:45:27 +00:00
Robert Nordier
c64dca10ab
Document -P (keyboard probe) assumptions.
1999-06-26 21:57:08 +00:00
Ruslan Ermilov
d44b4fd298
Clarify some details.
1999-06-23 07:00:30 +00:00
Robert Nordier
e5da9b6ba6
Include a table of disk error codes and a note about the cylinder >
...
1023 issue.
1999-05-22 12:55:16 +00:00
Robert Nordier
9ef416cfed
Add cross-reference to loader man page, plus various minor
...
improvements.
1999-03-16 13:16:11 +00:00
Robert Nordier
8dfcea8cc1
Make some further revisions to the boot documentation.
1999-01-19 09:04:18 +00:00
Robert Nordier
89aeb8ced9
Make a start on revising the boot documentation.
1999-01-06 14:19:09 +00:00
Kazutaka YOKOTA
7af89e87f8
Remove the reference to the -b option; it's gone.
1998-09-23 06:54:14 +00:00
Philippe Charnier
9448def93e
Correct use of .Nm. Add rcsid. -Wall. Add -p flag in usage string (was missing).
1998-07-15 06:51:38 +00:00
Poul-Henning Kamp
06c534212f
The '-h' option cannot toggle the kernel from a serial console
...
if the kernel was built with COMCONSOLE
PR: 7202
Reviewed by: phk
Submitted by: Greg A. Woods <woods@zeus.leitch.com>
1998-07-09 06:24:21 +00:00
Poul-Henning Kamp
862a7e9c36
say a few words about the -b option.
...
Reviewed by: Bill Trost <trost@cloud.rain.com>
1998-04-26 18:15:38 +00:00
Daniel O'Callaghan
048362aaa8
PR: 6104
...
Submitted by: Anatoly Vorobey <mellon@pobox.com>
Fix typo
1998-03-23 06:36:57 +00:00
Mike Smith
0c473d5219
Document the enhanced behaviour of the '-c' flag.
1998-02-10 00:17:44 +00:00
Bruce Evans
c65c062f59
Document recent changes (config files and -D...) and not so recent changes
...
(bios drive number...).
Submitted by: mostly by yokota
1997-07-05 02:02:02 +00:00
Philippe Charnier
41e964cb5d
Remove lines inside #ifdef 0/#endif.
1997-06-30 11:10:18 +00:00
Philippe Charnier
098166ed2d
Use err(3) instead of local copy.
1997-06-16 06:43:13 +00:00
Warner Losh
8d64695c7c
compare return value from getopt against -1 rather than EOF, per the final
...
posix standard on the topic.
1997-03-29 03:33:12 +00:00
Peter Wemm
c0ec1f37ef
Revert $FreeBSD$ to $Id$
1997-02-22 14:40:44 +00:00