Date: Tue, 28 Sep 1993 09:03:13 +0100 (MET)
The only place I found with a printf("status %x") is in /sys/i386/isa/lpt.c,
and looks much like a left-over debugging printout...
And it was... I changed it to an lprintf (which is defined if debuggin is on)
Rod
Added STRIP=, DBSYM=, and LOAD_ADDRESS?=
Now use LOAD_ADDRESS for linking kernel and for dbsym, added strip -x to
cut kernel size.
Added machde.o: dependency, this will be needed in the future, and for
now it does not hurt anyone.
Cleaned out conf.o: dependency, mkdep does the right things. Same for
param.c:
This is really a Merge in of NetBSD's Makefile.i386, here is the relevant
rlog info:
----------------------------
revision 1.27
date: 1993/08/27 23:58:20; author: brezak; state: Exp; lines: +2 -2
Need LOAD_ADDRESS for depend pass.
----------------------------
revision 1.25
date: 1993/07/19 16:52:16; author: mycroft; state: Exp; lines: +3 -3
Add ${DEBUG} to CFLAGS and -f to dbsym.
----------------------------
revision 1.22
date: 1993/07/18 10:08:22; author: mycroft; state: Exp; lines: +5 -6
Change to work with new config stuff for specifying load address.
----------------------------
revision 1.20
date: 1993/07/18 09:47:40; author: mycroft; state: Exp; lines: +6 -5
Use new -T option to dbsym.
----------------------------
revision 1.17
date: 1993/07/11 08:42:22; author: cgd; state: Exp; lines: +2 -2
don't ignore errors from dbsym... it might say that, e.g. there's
not enough symbol space!
----------------------------
revision 1.14
date: 1993/06/06 23:29:03; author: cgd; state: Exp; lines: +2 -2
make conf.o actually depend on conf.c...
----------------------------
revision 1.8
date: 1993/04/29 03:27:39; author: cgd; state: Exp; lines: +5 -10
use ed instead of ex. the script to use is identical, and we might
want to switch back to using ex when our ex supports -.
----------------------------
revision 1.5
date: 1993/03/24 18:48:57; author: cgd; state: Exp; lines: +1 -1
now use absolute path for dbsym
----------------------------
Date: Sun, 12 Sep 1993 18:19:05 -0500
This will allow you to compile and run a freebsd kernel with shared
memory support. I haven't tested the shm*() calls yet.
You run out of page table descriptors if you specify 4Mb of sharable
memory (SHMMAXPGS=1024). I don't know what the limit is, but
SHMMAXPGS=64 works. Rich
Date: Thu, 16 Sep 93 01:35:10 +1000
Julian writes:
>In fact DEVIDLE and FINDWORK ended up being basically equivalent.
>the bit I wonder about, is the returning of 0.. What (other than
>another request from somewhere else in the kernel) is going to start
>work on the next item on the queue?
I think removing FINDWORK would make things clearer.
Nothing much is going to start work on the next item. However, it is
pointless to continue processing the queue for the same unready drive.
Aborting all reads and trying harder to perform all writes would be
better.
Julian writes.
> no, actually it should be:
> fdt = fd_data[FDUNIT(minor(dev))].ft;
Fixed.
From: bde@kralizec.zeta.org.au (Bruce Evans)
Date: Thu, 16 Sep 93 22:56:01 +1000
The fd driver reported the wrong cylinder/head/sector numbers after an
error (ST3 is only valid after a sense-drive command), and didn't report
fs block numbers (diskerr was not used).
There was an old problem with writes to block fd devices. Try this:
1. write protect floppy in fd0.
2. tar cf /dev/fd0a /dev/null. Repeat a few times. Later writes tend to
terminate earlier.
3. un-write protect floppy.
4. repeat step 2. The writes tend to return 0, 2048, 4096, ... and then
succeed.
This was caused by a bug in vfs__bios.c. (The bug is fixed in NetBSD's
vfs_bio.c.) fd.c sets bp->b_resid to nonzero after an error. vfs__bios.c
was not initializing bp->b_resid. This causes some writes to terminate
early (e.g., writes to block devices; see spec_write()).
Related funnies:
1. Nothing tries to write the residual bytes.
2. The wd driver sets bp->b_resid to 0 after an error, so there's no
way anything else could write the residual bytes.
3. I use the block fd device for tar because the raw device seemed to
have more bugs long ago, and because it ought to be able to handle
buffering more transparently (I don't want to have to know the
device size). But spec_write() always uses the size BLKDEV_IOSIZE
== 2048 which is too small. For disks it should use the size of
one track (rounded down to meet the next track boundary or the i/o
size). Here it would help if the DIOCGPART ioctl worked. But
DIOCGPART is not implemented for floppies, and the disk size is
ignored except for partitions of type FS_BSDFFS.
Bruce
>Date: Sat, 11 Sep 93 12:59:39 +0800
1/ fix bug where cd0a was unusable because it was compared against
the number of 2k blocks not the number of 512byte blocks.. gave
an error for all reads past 1/4 way through the disk (cd0d was ok).
2/ fix open code so that it now notices if a disk has been changed
and updates the disklabel.
3/ use the new error handling code from st.c
4/ start adding stuff to get ready for using cd_scsi_cmd from
cd_start (like is done in st and sd)
5/ more general cleanups including making dmesg report
sector size of disk.. (believe it or not SUN drives use 512 byte)
quite and works correctly. This is derived from notes in Bruce Evans
lattest patches to fd.c:
>From: bde@kralizec.zeta.org.au (Bruce Evans)
>Subject: fixes for fd driver
6. I picked up some code posted the other day to implement label ioctls.
Now `disklabel fd0' works. See a comment for how to modify conf.c.
message for Bruces changes:
>From: bde@kralizec.zeta.org.au (Bruce Evans)
>Subject: fixes for fd driver
I think I've fixed some bugs in the 0.2.4 fd driver.
1. The main cause of hangs was that there was no timeout for seeks. So
attempting i/o with no floppy in the drive hung iff a seek was required.
2. Opens of unattached drives were allowed. The kernel usually paniced
soon after due to a bad pointer.
3. Some timeout functions ran at splclock() instead of splbio(). This
may not have mattered.
4. The state machine was left in a funny state after a timeout.
5. Some function headers were new-style.
6. I picked up some code posted the other day to implement label ioctls.
Now `disklabel fd0' works. See a comment for how to modify conf.c.
>Subject: Bad bug in kbdtables.h [FreeBSD]
I found a bug in /sys/i386/isa/kbdtables.h which contain the
different keyboard layouts for syscons. This regards all tables exept
the Danish and US. When compiling the kernel with any other keymapping
than Danish or none at all (US), you get an error that 'key_map' is undefined.
This is because there is a typo in the name of the struct containing
the tables, keymap intead of key_map.
I'd like to be able to say:
options "SYMTAB_SPACE=78000" # Kernel debugger symbol table size
If this seems a reasonable interim solution for freebsd, here's the
patch.. Rich
That is because TIOCMGET was broken. Yes...this is known for some time
and no, we (Bruce and me) never posted it. Why? Simply because we choose
to post fixes when we fixed most of the bugs.
Anyway..now that the slip problems are coming, here is a fix for
correct TIOCMGET behaviour.
-Guido
Note: this should be tested first (Rich?). Tested by rgrimes
in your config file from:
device cd0
device cd1
...
device cdn
to either
device cd0
or
psuedo-device cd0
The driver now dynamically allocates all per unit dependent structs, so it
will never run out of units (okay, so now we need 32 bit device major/minor
numbers!). It will allocate unit numbers as it needs them.
1) fixed 3c503 lock-up if the thinwire cable was disconnected at boot time
2) 8013EBT boards now work (quite well!) in 16bit/16k mode
3) ED_NO_DOUBLE_BUFFERING flag now works
4) slightly higer performance (about 3%) with 16bit WD/SMC boards
5) support for WD8013WC (10BaseT) boards
Additionally, the probe code has been reorganized to be much cleaner. This
revision of the driver is 1.25. The release notes have been updated as well.
going to panic shortly after this anyway. Destroys less state, and
keeps the machine from waiting for someone to smash the return key
a few times before it panics!
data. cd_data is now malloced on a per unit basis.
Protected all if ({scsi,cd}_debug).... with #ifdef CDDEBUG to reduce the
the size of the kernel when not debugging.
Subject: Re: Some small errors in GAMMA
4. Move printf("\n"); at line 491 in "/sys/i386/isa/sio.c" to after
COM_MULTIPORT block at line 512.
From rgrimes:
The above would cause the word (multiport) with out a new line to
appear after the uart type message if you had COM_MULTIPORT enabled.
Added support of DONET({IMP,NS,ISO}) so you can now compile with options
NS and ISO, still missing some IMP code, but since the imp is old and
gone I doubt this will ever be used.
Subject: More information on "netstat -r
Date: Mon, 7 Jun 1993 11:57:33 +0100
Gentlemen,
I have been trying for some time now to get "netstat -r"
working from the 0.2.2 patchkit. I have the following solution to the
bug.
The symbol _radix_node_head needs to be added to the symbols.raw file
to enable the new routing table access. If this symbol is not present
then the old system us used which results in no routes being given. I
don't think that this justifies a patch in its own right but perhaps
could be added to a related patch sometime..
From: bde@kralizec.zeta.org.au (Bruce Evans)
This fixes several problems.
It has almost everything that is in the FreeBSD version of Aug 22.
It is missing the bug for 2 drives and still prints <> around the
drive type. It handles BADEND144 less verbosely. It does wdgetctlr()
somewhat differently from NetBSD/FreeBSD.
Date: Sun Sep 5 06:45:12 PDT 1993
From: rgrimes@cdrom.com
Fixed printf's to be correct, since Bruce used the old ones. This driver
still prints phantom wd1's on some Maxtor and other IDE drives, I have
a patch I am sending to Bruce for checking.
wd80x3 class boards can be configured to the GENERIC kernels.
Entry was:
device ed0 at isa? port 0x280 net irq 9 iomem 0xd0000 vector edintr
Is now:
device ed0 at isa? port 0x280 net irq 5 iomem 0xd8000 vector edintr
FP and we try to call the emulator when it is not compiled in.
Removed the #if defined(i486) || defined(i387) that use to call the
panic if we did not have a math emulator.
Removed an extranious include of i386/i386/math_emu.h from math_emulate.c.
you'll get to the dump code. If you don't trust this on your disk also
add option NOT_TRUSTED, that disables the dump code, but prints out what
it WOULD do it it was going to scrible on your disk.
reinitialized between while loops. Added comments about what was going
on in the out_fdc routine.
out_fdc now returns if the direction bit is not set in time instead of
trying to wait for MRQ to get cleared.
I posted some patches on the 386bsd_patchkit list to prohibit io access.
Because of a noninitialised filed in the tss, this was possible.
It is included below as the patch to machdep.c
However, when you do this *necessary* fix (security), it will be
impossible form within user space to do io.
therefor, I included another fix: when you open /dev/io, you
get the access. Of course you can rewrite it to use another minor
and thus giving access to the iospace when /dev/mem is opened, e.g.
NOTE: The /dev/io entry has not been added to /dev/MAKEDEV yet.
The patch is in NetBSD.
I submitted the part of patch00155 that fixes wd.c not reporting any
bad blocks. Unfortunately, the patch created a new problem that makes new
installations using that kernel impossible. I have included a patch below that
should fix both problems. The fix comes from Tom Ivar Helbekkmo's wd driver
(the Norway wd driver). I've also eliminated the use of the DKFL_QUIET flag
completely, since it is not used anymore.
Fixed wdgetctrl routines for so that it returns a meaniful string for
non IDE disk drives. It also nolonger returns success when a drive is
not really there.
profiling, and various protection checks that cause security holes
and system crashes.
* Changed min/max/bcmp/ffs/strlen to be static inline functions
- included from cpufunc.h in via systm.h. This change
improves performance in many parts of the kernel - up to 5% in the
networking layer alone. Note that this requires systm.h to be included
in any file that uses these functions otherwise it won't be able to
find them during the load.
* Fixed incorrect call to splx() in if_is.c
* Fixed bogus variable assignment to splx() in if_ed.c
* them in cpufunc.h. Modified wait loop in reset to look a little better.
* Added read for talley counters to prevent an infinite loop on old
* 8003E's if they (the counters) overflow.
asic register even if the board isn't a 3c503. This caused old 8003E's not
to work because they ignore IO address bits >10bits and the 3c503 asic is
located at +0x400....the offset was ignored by the 8003E and so the
value was written to one of the NIC registers. The bug was discovered by
Wolfgang Solfrank.
8bit or 16bit operation, and a flag to disable transmitter double buffering.
See the updated "ed.relnotes" file for information about how to set
the flags.
This should be considered the first "production" release. It still
needs a manual page, though.
argument definitions outside of the function parameter list. This is
to reduce the copious warning messages that (non-Jolitz) gcc produces.
Also fixed some bogus variable declarations and casts to make the
compiler happy.
way of doing things. There still remain several drivers that need to
be updated. Also added a compile-time option to pccons to switch the
control and caps-lock keys (REVERSE_CAPS_CTRL) - added for my personal
sanity.
lpt doesn't work here if the printer is not turned on at boot time (this
has been reported for other systems).
lpt has a weird mapping of the flag bits vs printer numbers and MAKEDEV
does not understand this (printer 0 uses minor numbers 0-0x3f, printer 1
uses minors 0x40-0x7f, etc).
The following (simpler) problems are fixed by the patch.
lpt did not check the minor number on open, so if NLPT1 == 1 and you
try to open printer 1 then random memory above the lpt_sc array is
accessed. I thought I had this problem for minors 1 and 2. However,
it does not actually occur until minor 0x40. Does anyone have lpt64?
lpt had several unnecessary && broken ANSIisms and other sloppy
declarations.
Bruce
