Commit Graph

38382 Commits

Author SHA1 Message Date
Roger Hardiman
a4d0e7358a Update to PicoBSD 0.44 from RELENG_ 1999-06-14 15:45:41 +00:00
Bruce Evans
e343fb02c3 Updated the BUGS section. BREAK is now implemented.
Don't document non-bugs in the BUGS section, or anywhere else.  It
is not a bug to drop data when overloaded.  The compile-time tuning
options turned out to be not very useful, and aren't supported
offically.

Documented the not so new option CY_PCI_FASTINTR.
1999-06-14 15:10:35 +00:00
Nick Hibma
33d56839e3 Man pages for top refer to only 2.x, but not to 3.x and later 1999-06-14 12:06:11 +00:00
Hidetoshi Shimokawa
7872cbaeea Fix typo confusing `fa' and 'fb' registers.
Now, MATLAB works fine under OSF/1 emulation.
1999-06-14 11:42:30 +00:00
Brian Somers
ec3026b6f7 Come up with something useful when someone searches for
``dynamic IP''.
1999-06-14 10:12:41 +00:00
Nick Hibma
85dd1453b1 1) remove the soft reset after a command failed.
2) remove printing of errno and errstr
1999-06-13 22:09:14 +00:00
Poul-Henning Kamp
7a7404d275 Eliminate the bogus procfs private almost struct dirent structure.
Spotted by: Lars Hamren
Reviewed by: bde
1999-06-13 20:53:16 +00:00
Nick Hibma
7b69218647 1) Add non-blocking I/O on read
2) Add checks to make sure we do not dereference the softc when not found
because the device has been removed.
1999-06-13 20:49:12 +00:00
Nick Hibma
680514601e 1) Add the USB controllers (will now print pretty strings when no usb
support is compiled in)
2) Add probing for generic USB host controllers as well so we get them all
3) make the returned strings look alike in the whole file
1999-06-13 20:48:29 +00:00
Nick Hibma
b24ecce39c Shorten the strings a bit (remove 'Host') 1999-06-13 20:46:10 +00:00
Dmitrij Tejblum
8ea9dacf53 Fix placement of signal trampoline. 1999-06-13 19:41:50 +00:00
Alan Cox
dabd891d6e Use pmap_kenter instead of pmap_enter to map the message buffer. 1999-06-13 19:20:25 +00:00
Roger Hardiman
3d68f363a4 Removed checking for unit>NBKTR.
No longer need when using device_get_softc.
(also fixed bug where loadable bktr module could only access 1st device)
1999-06-13 16:05:00 +00:00
Roger Hardiman
d56282d89f Add bktr_load for the loadable Bt848/Bt878 driver. 1999-06-13 15:45:49 +00:00
Alan Cox
1c85e3df24 vm_map_protect:
The wrong vm_map_entry is used to determine if writes must not be
	allowed due to COW.
1999-06-12 23:10:38 +00:00
Roger Hardiman
05da1d9122 Add bktr (Bt848/Bt878 driver loadable module) to the Makefile i386 only section 1999-06-12 15:11:33 +00:00
Roger Hardiman
6c96acd35c Change perl5 to perl (same change as made in the fxp module) 1999-06-12 15:08:50 +00:00
Roger Hardiman
b72df81b21 Makefile to build a loadable bktr Bt848/Bt878 device driver
This allows the bt848 grabber to be loaded in the boot loader or
after bootup without the need for a custom kernel
1999-06-12 15:00:19 +00:00
Roger Hardiman
5a2f31f0fb Updated to use the new 4.x newbus API
Also removed the BSDI support (for now)
This allows the driver to be loaded/unloaded as a KLD
and loaded in the boot loader phase whithout making a custom kernel.
1999-06-12 14:54:56 +00:00
Mike Pritchard
49cb735198 Fix a minor style nit in the NAME section. 1999-06-11 16:26:29 +00:00
Mike Pritchard
fa91ff2797 Move the description of the strncmp() function from the RETURN VALUES
section to the DESCRIPTION section.

PR: 12133
Submitted by:	Sheldon Hearn <sheldonh@uunet.co.za>
1999-06-11 16:16:32 +00:00
Brian Somers
ad227d8bcc Show the correct error if we fail to open a device. 1999-06-11 13:28:29 +00:00
Ruslan Ermilov
adbdafc6b2 Don't accept divert/tee/pipe rules without corresponding option.
PR:		10324
Reviewed by:	luigi
1999-06-11 11:27:35 +00:00
Brian Somers
fbe3e6af84 Describe why a ``magic'' enddisc is not always a good idea. 1999-06-11 11:27:18 +00:00
Joseph Koshy
f1838373aa Larger, space separated fields in the output of repquota.
PR:		8730
Submitted by:	Andre Albsmeier <andre.albsmeier@mchp.siemens.de>
1999-06-11 10:31:24 +00:00
Ruslan Ermilov
0a81860b0b Workaround the problem that the first (and only first) port name
can't have a dash character (it is treated as a ``range'' operator).
One could now use such a name by escaping the ``-'' characters.
For example:

# ipfw add 1 count tcp from any to any "ms\-sql\-s"
# ipfw add 2 count tcp from any ftp\\-data-ftp to any

PR:		7101
1999-06-11 09:43:53 +00:00
Tim Vanderhoek
eb90c9c86a Compile when NO_REGEX is defined.
Submitted by:	Geordy Kitchen <gkitchen@cs.ubc.ca> (gnu/12117)
1999-06-11 04:36:16 +00:00
Mark Murray
1bcd27ee72 Improvement in the description of what this does.
Prompted by (and thanks to): W Richard Stevens
1999-06-10 22:48:27 +00:00
Dmitrij Tejblum
23405ee478 Replace my previous fix of saving the FP state with a much simpler one: when
we swap out fpcurproc, save its FP state.

Suggested by:	bde
1999-06-10 20:40:59 +00:00
Kenneth D. Merry
b150665acf For vendor-specific commands sent using the 'camcontrol cmd' facility,
use the passed in CDB length, not 1.

Submitted by:	Jean-Marc Zucconi <jmz@FreeBSD.ORG>
1999-06-10 16:14:18 +00:00
Hidetoshi Shimokawa
766b710e3a Remove 'SET_ASM_OP' macro, which is unused now and rather harmful
for recent egcs.
1999-06-10 12:05:48 +00:00
Brian Somers
5dfb9210ae Allow reserved substitution strings to be escaped by preceeding them
with a backslash.
1999-06-10 09:34:57 +00:00
Brian Somers
194c225d5c Never bring a link back up after receiving a terminating signal,
don't rely on already being in PHASE_DEAD.
1999-06-10 09:06:30 +00:00
Jonathan Lemon
5a86dd8c67 Change variable used for calculating ending address of physical memory
from 'int' to 'vm_offset_t'.

Spotted by:	 Richard Cownie <tich@ma.ikos.com>
1999-06-10 02:48:51 +00:00
Brian Somers
cf2df276f9 Don't delete quota files when clean-tmps is enabled. 1999-06-10 00:34:15 +00:00
Brian Somers
9afe6bdaee Allow a remote IP and port range specification in the
``alias port'' command.
1999-06-10 00:17:27 +00:00
Brian Somers
ab959eb2b3 Initialise `mp'. 1999-06-09 20:27:26 +00:00
Brian Somers
7063995c94 Allow our endpoint discriminator to be enabled, disabled, accepted
and denied.  This is necessary for some MP implementations that
get confused if you accept their endpoint discriminator but reject
their MRRU.
1999-06-09 16:54:04 +00:00
Brian Somers
c6f660d19f Add a rather complicated but impressive example of how
to implement multi-link ppp over more than one ISP with
the ability to lose ISPs without loss of connectivity.

It *requires* that you either have administrative access
to a machine that's already connected to the 'net or at
least know a really nice person that does.
1999-06-09 12:32:55 +00:00
Andrey A. Chernov
97a83933e5 Add detection code for NVidia Riva 128,TNT,TNT2
(TNT2 from me)

PR: 12094
Submitted by: Ilya Naumov camel@avias.com
1999-06-09 11:46:43 +00:00
Jordan K. Hubbard
177bf8278c where_arge is allocated on stack and return address is overwritten
by buffer overflow.

Submitted by:	Hidetoshi Shimokawa <simokawa@sat.t.u-tokyo.ac.jp>
1999-06-09 09:29:53 +00:00
Jordan K. Hubbard
85cfadeb74 Remove apple.com from time server list.
Submitted by:	Mike Haro
1999-06-09 09:18:33 +00:00
Jordan K. Hubbard
47b06c4f2f Various edits to shrink fixit and enable dhcp-client 1999-06-09 09:08:22 +00:00
Brian Somers
8fb106c674 Use the correct pid when substituting PROCESSID.
Problem reported by: Amedeo Beck Peccoz <gea@gressoney.it>
1999-06-09 08:47:36 +00:00
Andrey A. Chernov
24c56392de little optimization of locale sensing code 1999-06-09 00:07:10 +00:00
Brian Somers
68645f3954 Don't use static variables if we don't have to. 1999-06-08 20:12:06 +00:00
Brian Somers
c506ecd549 Don't drop the last character from lines in ppp.secret unless it's '\n'. 1999-06-08 20:11:53 +00:00
Dmitrij Tejblum
2105375397 Use kmem_alloc_nofault() rather than kmem_alloc_pageable() to allocate
kernel virtual address space for UPAGES.
1999-06-08 17:14:22 +00:00
Dmitrij Tejblum
a839bdc8af Add a function kmem_alloc_nofault() - same as kmem_alloc_pageable(), but
create a nofault entry. It will be used to allocate kmem for upages.

(I am not too happy with all this, but it's better than nothing).
1999-06-08 17:03:28 +00:00
Dmitrij Tejblum
be960acd20 Keep fpcurproc locked in memory, so that we always can save the FP state
correctly.

This should fix the "pmap_changebit didn't" panic that some people see.

Reviewed by:	dfr
1999-06-08 16:42:19 +00:00