This code caused more problems than it should have fixed (boot failures) on
the machines I tested, so has been commented out for a while now. Remove
it, and assume the errata fixups were done by the bootloader where they
belong.
Discussing with others, this needs to be at least 20 to boot on some POWER9
nodes. Linux made a similar change for the same reason, so increase to 32
to give us some extra breathing room as well. The input and output arrays
are sized at 256, so much greater than the increase in the property array
size.
sysentvec::sv_hwcap/sv_hwcap2 are pointers to u_long, so cpu_features* need
to be u_long to use the pointers. This also requires a temporary cast in
printing the bitfields, which is fine because the feature flag fields are
only 32 bits anyway.
FreeBSD exports the AT_HWCAP* auxvec items if provided by the ELF sysentvec
structure. Add the CPU features to be exported, so user space can more
easily check for them without using the hw.cpu_features and hw.cpu_features2
sysctls.
Not all feature flags are synced. Those for processors we don't currently
support are ignored currently. Those that are supported are synced best I
can tell. One flag was renamed to match the Linux flag name
(PPC_FEATURE2_VCRYPTO -> PPC_FEATURE2_VEC_CRYPTO).
Summary:
POWER9 also contains 32 slbs entries as explained by the POWER9 User Manual:
"For HPT translation, the POWER9 core contains a unified (combined for both
instruction and data), 32-entry, fully-associative SLB per thread"
Submitted by: Breno Leitao
Differential Revision: https://reviews.freebsd.org/D15128
Summary:
Powerpc64 has support for a register called Data Stream Control Register
(DSCR), which basically controls how the hardware controls the caching and
prefetch for stream operations.
Since mfdscr and mtdscr are privileged instructions, we need to emulate them,
and
keep the custom DSCR configuration per thread.
The purpose of this feature is to change DSCR depending on the operation, set
to DSCR Default Prefetch Depth to deepest on string operations, as memcpy.
Submitted by: Breno Leitao
Differential Revision: https://reviews.freebsd.org/D15081
region marked "available" by firmware is contained entirely in the kernel.
This had a tendency to happen with FDTs passed by loader, though could for
other reasons as well, and would result in the kernel slowly cannibalizing
itself for other purposes, eventually resulting in a crash.
A similar fix is needed for mmu_oea.c and should probably just be rolled
at that point into some generic code in platform.c for taking a mem_region
list and removing chunks.
PR: 226974
Submitted by: leandro.lupori@gmail.com
Reviewed by: jhibbits
Differential Revision: D15121
This will allow to hook a ddb script to "kdb.enter.trap" event.
Previously there was no specific name for this event, so it could only
be handled by either "kdb.enter.unknown" or "kdb.enter.default" hooks.
Both are very unspecific.
Having a specific event is useful because the fatal trap condition is
very similar to panic but it has an additional property that the current
stack frame is the frame where the trap occurred. So, both a register
dump and a stack bottom dump have additional information that can help
analyze the problem.
I have added the event only on architectures that have trap_fatal()
function defined. I haven't looked at other architectures. Their
maintainers can add support for the event later.
Sample script:
kdb.enter.trap=bt; show reg; x/aS $rsp,20; x/agx $rsp,20
Reviewed by: kib, jhb, markj
MFC after: 11 days
Sponsored by: Panzura
Differential Revision: https://reviews.freebsd.org/D15093
Half of implementations always failed (returned (-1)) and they were
previously used in only one place.
Reviewed by: kib, andrew
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15102
This makes it more consistent with FreeBSD norms, rather than using Linux's
norms. Now, instead of needing an environment variable
video-mode=fslfb:1280x1024@60
Now one would use a hint:
hint.fb.0.mode=1280x1024@60
Most other architectures already re-enter KDB on faults, powerpc and mips
are the only outliers. Correct this for powerpc, so that now bad addresses
can be handled gracefully instead of panicking.
Make int_external_input, int_decrementer, and int_performance_counter all
now use trap_common, just like on AIM. The effects of this are:
* All traps are now properly displayed in ddb. Previously traps from
external input, decrementer, and performance counters, would display as
just basic stack traces. Now the frame is displayed.
* External interrupts are now handled with interrupts enabled, so handling
can be preempted. This seems to fix a hang found post-r329882.
Change OF_getencprop_alloc semantics to be combination of malloc and
OF_getencprop and return size of the property, not number of elements
allocated.
For the use cases where number of elements is preferred introduce
OF_getencprop_alloc_multi helper function that copies semantics
of OF_getencprop_alloc prior to this change.
This is to make OF_getencprop_alloc and OF_getencprop_alloc_multi
function signatures consistent with OF_getencprop_alloc and
OF_getencprop_alloc_multi.
Functionality-wise this patch is mostly rename of OF_getencprop_alloc
to OF_getencprop_alloc_multi except two calls in ofw_bus_setup_iinfo
where 1 was used as a block size.
OF_getprop_alloc takes element size argument and returns number of
elements in the property. There are valid use cases for such behavior
but mostly API consumers pass 1 as element size to get string
properties. What API users would expect from OF_getprop_alloc is to be
a combination of malloc + OF_getprop with the same semantic of return
value. This patch modifies API signature to match these expectations.
For the valid use cases with element size != 1 and to reduce
modification scope new OF_getprop_alloc_multi function has been
introduced that behaves the same way OF_getprop_alloc behaved prior to
this patch.
Reviewed by: ian, manu
Differential Revision: https://reviews.freebsd.org/D14850
Summary:
This code adds the basic infrastructure for the facility subsystem. A facility
trap is raised when an unavailable instruction is executed. One example is
executing a Hardware Transactional Memory instruction while the MSR[TM] is
disabled. In the past, there was a specific interrupt for it (FP, VEC), but the
new instructions seem to be multiplexed on this facility interrupt.
The root cause of the trap is provided on Facility Status and Control Register
(FSCR) register.
Submitted by: Breno Leitao
Reviewed by: nwhitehorn
Differential Revision: https://reviews.freebsd.org/D14566
Summary:
Print current MSR on printtrap(). Currently, printtrap just prints srr1, which
contains part of the MSR prior to the exception. I find useful to dump the
current value of the MSR, since it changes when there is an interruption.
With this patch, this is the new printtrap model:
handled user trap:
exception = 0x700 (program)
srr0 = 0x100008a0 (0x100008a0)
srr1 = 0x800000000002f032
current msr = 0x8000000000009032
lr = 0x1000089c (0x1000089c)
curthread = 0x7a50000
pid = 714, comm = ttrap2
Submitted by: Breno Leitao
Reviewed by: nwhitehorn
Differential Revision: https://reviews.freebsd.org/D14600
Summary:
It is not necessary to call isync() after calling mtmsr() function, mainly
because the mtmsr() calls 'isync' internally to synchronize the machine state
register. Other than that, isync() just calls the 'isync' instruction, thus,
the 'isync' instruction is being called twice, and that seems to be unnecessary.
This patch just remove the unecessary calls to isync() after mtmsr().
Submitted by: Breno Leitao
Differential Revision: https://reviews.freebsd.org/D14583
Summary:
Currently ofw_real_bounce_alloc() is requesting memory, using WAITOK, holding a
non-sleepable locks, called 'OF Bounce Page'.
Fix this by allocating the pages outside of the lock, and only updating the
global variables while holding the lock.
Submitted by: Breno Leitao
Differential Revision: https://reviews.freebsd.org/D14955
opt_compat.h is mentioned in nearly 180 files. In-progress network
driver compabibility improvements may add over 100 more so this is
closer to "just about everywhere" than "only some files" per the
guidance in sys/conf/options.
Keep COMPAT_LINUX32 in opt_compat.h as it is confined to a subset of
sys/compat/linux/*.c. A fake _COMPAT_LINUX option ensure opt_compat.h
is created on all architectures.
Move COMPAT_LINUXKPI to opt_dontuse.h as it is only used to control the
set of compiled files.
Reviewed by: kib, cem, jhb, jtl
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14941
TLB1 can handle ranges up to 4GB (through e5500, larger in e6500), but
ilog2() took a unsigned int, which maxes out at 4GB-1, but truncates
silently. Increase the input range to the largest supported, at least for
64-bit targets. This lets the DMAP be completely mapped, instead of only
1GB blocks with it assuming being fully mapped.
As with AIM64, map the DMAP at the beginning of the fourth "quadrant" of
memory, and move the KERNBASE to the the start of KVA.
Eventually we may run the kernel out of the DMAP, but for now, continue
booting as it has been.
assym is only to be included by other .s files, and should never
actually be assembled by itself.
Reviewed by: imp, bdrewery (earlier)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D14180
OF_finddevices returns ((phandle_t)-1) in case of failure. Some code
in existing drivers checked return value to be equal to 0 or
less/equal to 0 which is also wrong because phandle_t is unsigned
type. Most of these checks were for negative cases that were never
triggered so trhere was no impact on functionality.
Reviewed by: nwhitehorn
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D14645
When the kernel can be in real mode in early boot, we can execute from
high addresses aliased to the kernel's physical memory. If that high
address has the first two bits set to 1 (0xc...), those addresses will
automatically become part of the direct map. This reduces page table
pressure from the kernel and it sets up the kernel to be used with
radix translation, for which it has to be up here.
This is accomplished by exploiting the fact that all PowerPC kernels are
built as position-independent executables and relocate themselves
on start. Before this patch, the kernel runs at 1:1 VA:PA, but that
VA/PA is random and set by the bootloader. Very early, it processes
its ELF relocations to operate wherever it happens to find itself.
This patch uses that mechanism to re-enter and re-relocate the kernel
a second time witha new base address set up in the early parts of
powerpc_init().
Reviewed by: jhibbits
Differential Revision: D14647
accomplishes a few things:
- Makes NULL an invalid address in the kernel, which is useful for catching
bugs.
- Lays groundwork for radix-tree translation on POWER9, which requires the
direct map be at high memory.
- Similarly lays groundwork for a direct map on 64-bit Book-E.
The new base address is chosen as the base of the fourth radix quadrant
(the minimum kernel address in this translation mode) and because all
supported CPUs ignore at least the first two bits of addresses in real
mode, allowing direct-map addresses to be used in real-mode handlers.
This is required by Linux and is part of the architecture standard
starting in POWER ISA 3, so can be relied upon.
Reviewed by: jhibbits, Breno Leitao
Differential Revision: D14499
correctly for the data contained on each memory page.
There are several components to this change:
* Add a variable to indicate the start of the R/W portion of the
initial memory.
* Stop detecting NX bit support for each AP. Instead, use the value
from the BSP and, if supported, activate the feature on the other
APs just before loading the correct page table. (Functionally, we
already assume that the BSP and all APs had the same support or
lack of support for the NX bit.)
* Set the RW and NX bits correctly for the kernel text, data, and
BSS (subject to some caveats below).
* Ensure DDB can write to memory when necessary (such as to set a
breakpoint).
* Ensure GDB can write to memory when necessary (such as to set a
breakpoint). For this purpose, add new MD functions gdb_begin_write()
and gdb_end_write() which the GDB support code can call before and
after writing to memory.
This change is not comprehensive:
* It doesn't do anything to protect modules.
* It doesn't do anything for kernel memory allocated after the kernel
starts running.
* In order to avoid excessive memory inefficiency, it may let multiple
types of data share a 2M page, and assigns the most permissions
needed for data on that page.
Reviewed by: jhb, kib
Discussed with: emaste
MFC after: 2 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D14282
Add I2C OPAL driver and a set of dummy-ones to allow
all I2C things on Power8 to attach.
TODO: better async token management
Submitted by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by: IBM, QCM Technologies
A reservation granule on PowerPC is a cache line.
On e500mc and derivatives a cacheline size is 64 bytes, not 32. Allocate
the maximum size permitted, but only utilize the size that is needed. On
e500v1 and e500v2 the reservation granule will still be 32 bytes.
