In the first command of a 'for', $? should be the exit status of the last
pipeline (command substitution in the word list or command before 'for'),
not always 0.
- A real filename is now shown in an output report when "-f file" is specified.
- Add Xr lastlogin into last(1) manual page.
Reviewed by: ed
MFC after: 1 week
- ipv6_enable + ipv6_gateway_enable should unset ACCEPT_RTADV by default for
backward compatibility.
- Configurations in ipv6_prefix_IF should be recognized even if there is no
ifconfig_IF_ipv6.
- DAD wait should be performed at once, not on a per-interface basis, if
possible. This fixes an issue that a system with a lot of IPv6-capable
interfaces takes too long for booting.
MFC after: 1 week
Previous code was relatively dumb. During CODEC probe it was tracing signals
and statically binding amplifier controls to the OSS mixer controls. To set
volume it just set all bound amplifier controls proportionally to mixer
level, not looking on their hierarchy and amplification levels/offsets.
New code is much smarter. It also traces signals during probe, but mostly
to find out possible amplification control rages in dB for each specific
signal. To set volume it retraces each affected signal again and sets
amplifiers controls recursively to reach desired amplification level in dB.
It would be nice to export values in dB to user, but unluckily our OSS mixer
API is too simple for that.
As result of this change:
- cascaded amplifiers will work together to reach maximal precision.
If some input has 0/+40dB preamplifier with 10dB step and -10/+10dB mixer
with 1dB step after it, new code will use both to provide 0/+40dB control
with 1dB step! We could even get -10/+50dB range there, but that is
intentionally blocked for now.
- different channels of multichannel associations on non-uniform CODECs
such as VIA VT1708S will have the same volume, not looking that control
ranges are different. It was not good when fronts were 12dB louder.
- for multiplexed recording, when we can record from only one source at
a time, we can now use recording amplifier controls to set different
volume levels for different inputs if they have no own controls of they
are less precise. If recording source change, amplifiers will be
reconfigured.
To improve out-of-the-box behavior, ignore default volume levels set by
sound(4) and use own, more reasonable: +20dB for mics, -10dB for analog
output volume and 0dB for the rest of controls. sound(4) defaults of 75%
mean absolutely random things for different controls of different CODECs
because of very different control ranges.
Together with further planned automatic recording source selection this
should allow users to get fine playback and recording without touching
mixer first.
Note that existing users should delete /var/db/mixer*-state and reboot
or trigger CODEC reconfiguration to get new default values.
MFC after: 2 months
Sponsored by: iXsystems, Inc.
This makes it much easier to determine whether an event occurs in the
net80211 taskqueue (which was called "ath0 taskq") or the ath driver
taskqueue (which is also called "ath0 taskq".)
comments to longer, also refining strange ones.
Properly use #ifdef rather than #if defined() where possible. Four
#if defined(PCBGROUP) occurances (netinet and netinet6) were ignored to
avoid conflicts with eventually upcoming changes for RSS.
Reported by: bde (most)
Reviewed by: bde
MFC after: 3 days
provide struct namecache_ts which is the old struct namecache. Only
allocate struct namecache_ts if non-null struct timespec *tsp was
passed to cache_enter_time, otherwise use struct namecache.
Change struct namecache allocation and deallocation macros into static
functions, since logic becomes somewhat twisty. Provide accessor for
the nc_name member of struct namecache to hide difference between
struct namecache and namecache_ts.
The aim of the change is to not waste 20 bytes per small namecache
entry.
Reviewed by: jhb
MFC after: 2 weeks
X-MFC-note: after r230394
names and wants to sort them by name, ie. when executes:
# zfs list -t snapshot -o name -s name
Because only name is needed we don't have to read all snapshot properties.
Below you can find how long does it take to list 34509 snapshots from a single
disk pool before and after this change with cold and warm cache:
before:
# time zfs list -t snapshot -o name -s name > /dev/null
cold cache: 525s
warm cache: 218s
after:
# time zfs list -t snapshot -o name -s name > /dev/null
cold cache: 1.7s
warm cache: 1.1s
MFC after: 1 week
the signal handlers with the context information in the deferrred
case.
Only enable the use of getcontextx(3) in the deferred signal delivery
code on amd64 and i386. Sparc64 seems to have some undetermined issues
with interaction of alloca(3) and signal delivery.
Tested by: flo (who also provided sparc64 harware access for me), pho
Discussed with: marius
MFC after: 1 month
fit into existing mcontext_t.
On i386 and amd64 do return the extended FPU states using
getcontextx(3). For other architectures, getcontextx(3) returns the
same information as getcontext(2).
Tested by: pho
MFC after: 1 month
64bit and 32bit ABIs. As a side-effect, it enables AVX on capable
CPUs.
In particular:
- Query the CPU support for XSAVE, list of the supported extensions
and the required size of FPU save area. The hw.use_xsave tunable is
provided for disabling XSAVE, and hw.xsave_mask may be used to
select the enabled extensions.
- Remove the FPU save area from PCB and dynamically allocate the
(run-time sized) user save area on the top of the kernel stack,
right above the PCB. Reorganize the thread0 PCB initialization to
postpone it after BSP is queried for save area size.
- The dumppcb, stoppcbs and susppcbs now do not carry the FPU state as
well. FPU state is only useful for suspend, where it is saved in
dynamically allocated suspfpusave area.
- Use XSAVE and XRSTOR to save/restore FPU state, if supported and
enabled.
- Define new mcontext_t flag _MC_HASFPXSTATE, indicating that
mcontext_t has a valid pointer to out-of-struct extended FPU
state. Signal handlers are supplied with stack-allocated fpu
state. The sigreturn(2) and setcontext(2) syscall honour the flag,
allowing the signal handlers to inspect and manipilate extended
state in the interrupted context.
- The getcontext(2) never returns extended state, since there is no
place in the fixed-sized mcontext_t to place variable-sized save
area. And, since mcontext_t is embedded into ucontext_t, makes it
impossible to fix in a reasonable way. Instead of extending
getcontext(2) syscall, provide a sysarch(2) facility to query
extended FPU state.
- Add ptrace(2) support for getting and setting extended state; while
there, implement missed PT_I386_{GET,SET}XMMREGS for 32bit binaries.
- Change fpu_kern KPI to not expose struct fpu_kern_ctx layout to
consumers, making it opaque. Internally, struct fpu_kern_ctx now
contains a space for the extended state. Convert in-kernel consumers
of fpu_kern KPI both on i386 and amd64.
First version of the support for AVX was submitted by Tim Bird
<tim.bird am sony com> on behalf of Sony. This version was written
from scratch.
Tested by: pho (previous version), Yamagi Burmeister <lists yamagi org>
MFC after: 1 month
Currently the code is not built by any modules. That will
be fixed later. The Atmel ARM bus interface file part of this
commit is just for sake of example. All registers and bits are
declared like macros and not C-structures like in official
Synopsis header files. This driver mostly origins from the
musb_otg.c driver in FreeBSD except that the chip specific
programming has been replaced by the one for DWC 2.0 USB OTG.
Some parts related to system suspend and resume have been left
like empty functions for the future. USB suspend and resume is
fully supported.
For example, this particular topology didn't work correctly from all
nodes:
[A] - [B] - [C] - [D]
Submitted by: Monthadar Al Jaberi <monthadar@gmail.com>
Reviewed by: bschmidt, adrian
This allows for multiple MAC addresses to be printed on the same
debugging line. ether_sprintf() uses a static char buffer and
thus isn't very useful here.
Submitted by: Monthadar Al Jaberi <monthadar@gmail.com>
of root HUB. Although it is initialized with port index of the
device's parent hub, which is worng. So track the USB tree up to
root HUB and initialize this filed ptroprly
Rename port_index to root_port_index in order to reflect its
real semantics.
creating stray "log" symlinks if the mount fails. That apparently
happens in some ezjail configs.
PR: conf/143084
Submitted by: Dirk Engling <erdgeist at erdgeist.org>
Reviewed by: simon
MFC after: 2 weeks
versions derived from /usr/ports/audio/oss.
The particular headers used were taken from the
attic/drv/oss_allegro directory and are mostly identical
to the previous files.
The Maestro3 driver is now free from the GPL.
NOTE: due to lack of testers this driver is being
considered for deprecation and removal.
PR: kern/153920
Approved by: jhb (mentor)
MFC after: 2 weeks
profiling and kernel profiling. To enable kernel profiling one has to build
kgmon(8). I will enable the build once I managed to build and test powerpc
(32-bit) kernels with profiling support.
- add a powerpc64 PROF_PROLOGUE for _mcount.
- add macros to avoid adding the PROF_PROLOGUE in certain assembly entries.
- apply these macros where needed.
- add size information to the MCOUNT function.
MFC after: 3 weeks, together with r230291
entries on one client when a directory was renamed on another client. The
root cause for the stale entry being trusted is that each per-vnode nfsnode
structure has a single 'n_ctime' timestamp used to validate positive name
cache entries. However, if there are multiple entries for a single vnode,
they all share a single timestamp. To fix this, extend the name cache
to allow filesystems to optionally store a timestamp value in each name
cache entry. The NFS clients now fetch the timestamp associated with
each name cache entry and use that to validate cache hits instead of the
timestamps previously stored in the nfsnode. Another part of the fix is
that the NFS clients now use timestamps from the post-op attributes of
RPCs when adding name cache entries rather than pulling the timestamps out
of the file's attribute cache. The latter is subject to races with other
lookups updating the attribute cache concurrently. Some more details:
- Add a variant of nfsm_postop_attr() to the old NFS client that can return
a vattr structure with a copy of the post-op attributes.
- Handle lookups of "." as a special case in the NFS clients since the name
cache does not store name cache entries for ".", so we cannot get a
useful timestamp. It didn't really make much sense to recheck the
attributes on the the directory to validate the namecache hit for "."
anyway.
- ABI compat shims for the name cache routines are present in this commit
so that it is safe to MFC.
MFC after: 2 weeks
Make sure the non-SSE lowering for fences correctly clobbers EFLAGS.
PR11768.
In particular, this fixes segfaults during the build of devel/icu on
i386. The __sync_synchronize() builtin used for implementing icu's
internal barrier could lead to incorrect behaviour.
MFC after: 3 days
dhclient is no longer a real service, it is a helper script
for /etc/rc.d/netif and devd. Its direct invocation isn't
needed to bring the network up.
Approved by: jhb
