Commit Graph

692 Commits

Author SHA1 Message Date
Warner Losh
7a3e3a2859 Remove a couple of harmless stray references to nandfs.
Submitted by: tsoome@
2019-06-25 16:39:25 +00:00
Warner Losh
f5a95d9a07 Remove NAND and NANDFS support
NANDFS has been broken for years. Remove it. The NAND drivers that
remain are for ancient parts that are no longer relevant. They are
polled, have terrible performance and just for ancient arm
hardware. NAND parts have evolved significantly from this early work
and little to none of it would be relevant should someone need to
update to support raw nand. This code has been off by default for
years and has violated the vnode protocol leading to panics since it
was committed.

Numerous posts to arch@ and other locations have found no actual users
for this software.

Relnotes:	Yes
No Objection From: arch@
Differential Revision: https://reviews.freebsd.org/D20745
2019-06-25 04:50:09 +00:00
Ian Lepore
5364951d98 Build an armv7 LINT kernel in addition to armv5 LINT. You might think this
had been done years ago.  I did.  All this time we've only compiled a LINT
kernel for TARGET_ARCH=arm.  Now separate LINT-V5 and LINT-V7 configs are
generated and built.

There are two new files in arm/conf, NOTES.armv5 and NOTES.armv7, containing
some of what used to be in the arm NOTES file.  That file now contains only
the bits that are common to v5 and v7.

The makeLINT.mk file now creates the LINT-V5 and LINT-V7 files by concatening
sys/conf/NOTES, arm/conf/NOTES, and arm/conf/NOTES.armv{5,7} in that order.
2019-06-24 01:42:09 +00:00
Ian Lepore
83b319101f Add pwm to the armv7 GENERIC kernel, it's now used by TI and Allwinner. 2019-06-21 15:44:58 +00:00
Conrad Meyer
c363b16c63 sys: Remove DEV_RANDOM device option
Remove 'device random' from kernel configurations that reference it (most).
Replace perhaps mistaken 'nodevice random' in two MIPS configs with 'options
RANDOM_LOADABLE' instead.  Document removal in UPDATING; update NOTES and
random.4.

Reviewed by:	delphij, markm (previous version)
Approved by:	secteam(delphij)
Differential Revision:	https://reviews.freebsd.org/D19918
2019-06-21 00:16:30 +00:00
Ian Lepore
6e14f601aa Build SoC-specific modules with GENERIC for the SoCs that have them. 2019-06-16 01:23:45 +00:00
Ian Lepore
5935e64693 Split the dtb MODULES_EXTRA line to a series of += lines, making it easier
to maintain and keep in alphabetical order, and paving the way for adding
some other modules that aren't dtb-related.
2019-06-16 01:05:53 +00:00
Andrew Gallatin
542970fa2d Remove IPSEC from GENERIC due to performance issues
Having IPSEC compiled into the kernel imposes a non-trivial
performance penalty on multi-threaded workloads due to IPSEC
refcounting. In my benchmarks of multi-threaded UDP
transmit (connected sockets), I've seen a roughly 20% performance
penalty when the IPSEC option is included in the kernel (16.8Mpps
vs 13.8Mpps with 32 senders on a 14 core / 28 HTT Xeon
2697v3)). This is largely due to key_addref() incrementing and
decrementing an atomic reference count on the default
policy. This cause all CPUs to stall on the same cacheline, as it
bounces between different CPUs.

Given that relatively few users use ipsec, and that it can be
loaded as a module, it seems reasonable to ask those users to
load the ipsec module so as to avoid imposing this penalty on the
GENERIC kernel. Its my hope that this will make FreeBSD look
better in "out of the box" benchmark comparisons with other
operating systems.

Many thanks to ae for fixing auto-loading of ipsec.ko when
ifconfig tries to configure ipsec, and to cy for volunteering
to ensure the the racoon ports will load the ipsec.ko module

Reviewed by:	cem, cy, delphij, gnn, jhb, jpaetzel
Differential Revision:	https://reviews.freebsd.org/D20163
2019-05-09 22:38:15 +00:00
Kyle Evans
251a32b5b2 tun/tap: merge and rename to tuntap
tun(4) and tap(4) share the same general management interface and have a lot
in common. Bugs exist in tap(4) that have been fixed in tun(4), and
vice-versa. Let's reduce the maintenance requirements by merging them
together and using flags to differentiate between the three interface types
(tun, tap, vmnet).

This fixes a couple of tap(4)/vmnet(4) issues right out of the gate:
- tap devices may no longer be destroyed while they're open [0]
- VIMAGE issues already addressed in tun by kp

[0] emaste had removed an easy-panic-button in r240938 due to devdrn
blocking. A naive glance over this leads me to believe that this isn't quite
complete -- destroy_devl will only block while executing d_* functions, but
doesn't block the device from being destroyed while a process has it open.
The latter is the intent of the condvar in tun, so this is "fixed" (for
certain definitions of the word -- it wasn't really broken in tap, it just
wasn't quite ideal).

ifconfig(8) also grew the ability to map an interface name to a kld, so
that `ifconfig {tun,tap}0` can continue to autoload the correct module, and
`ifconfig vmnet0 create` will now autoload the correct module. This is a
low overhead addition.

(MFC commentary)

This may get MFC'd if many bugs in tun(4)/tap(4) are discovered after this,
and how critical they are. Changes after this are likely easily MFC'd
without taking this merge, but the merge will be easier.

I have no plans to do this MFC as of now.

Reviewed by:	bcr (manpages), tuexen (testing, syzkaller/packetdrill)
Input also from:	melifaro
Relnotes:	yes
Differential Revision:	https://reviews.freebsd.org/D20044
2019-05-08 02:32:11 +00:00
Conrad Meyer
d6745408c7 Add a COMPAT_FREEBSD12 kernel option.
Use it wherever COMPAT_FREEBSD11 is currently specified, like r309749.

Reviewed by:	imp, jhb, markj
Sponsored by:	Dell EMC Isilon
Differential Revision:	https://reviews.freebsd.org/D20120
2019-05-02 18:10:23 +00:00
Emmanuel Vadot
f52ce0326c arm: allwinner: Makes more device optional
MFC after:	2 weeks
2019-04-16 22:42:50 +00:00
Peter Jeremy
90dd0cc0b9 Specify correct Ethernet phy for RPI-B
Correct a typo in the RPI-B ethernet config - the RPi-B includes a
SMC LAN9512 USB bridge and Ethernet 10/100 NIC/phy.  The phy part of
this is supported by smscphy.

Tested On: RPi1 Model B

Approved by:	grog, jhb (mentors)
MFC after:	3 days
2019-04-16 09:44:46 +00:00
Warner Losh
f7ab01581a Move mpr/mps drivers from per-arch NOTES files into the MI notes
file. They are in more arches they they aren't. Add appropriate
nodevice directives in powerpc and arm.
2019-04-13 06:30:45 +00:00
Emmanuel Vadot
9a042e7d03 arm: kernel: Remove old kernel configs
Follow up to r346095
All those kernels are either not working or the release have switched
to GENERIC
2019-04-10 19:27:14 +00:00
Andriy Voskoboinyk
4945f79a4c Remove IEEE80211_AMPDU_AGE config option.
It is noop since r297774.
2019-01-20 15:17:56 +00:00
Luiz Otavio O Souza
77613ca0cb Comment MD_ROOT and remove 'device re' which is not part of the system and
can be loaded as module.
2018-11-15 16:29:27 +00:00
Luiz Otavio O Souza
2e82757c64 Add the driver for the SPI controller on ARMADA38X.
Tested on Clearfog (Pro) and SG-3100.

Sponsored by:	Rubicon Communications, LLC (Netgate)
2018-11-14 14:26:32 +00:00
Kyle Evans
be352d20d5 Compile in VERBOSE_SYSINIT support by default, remain silent by default
The loader tunable 'debug.verbose_sysinit' may be used to toggle verbosity.
This is added to the debugging section of these kernconfs to be turned off
in stable branches for clarity of intent.

MFC after:	never
2018-10-31 22:38:19 +00:00
Ruslan Bukin
3c8efd61f5 Revert r339421 due to unintended files included to commit.
Reported by:	ian
Approved by:	re (gjb)
Sponsored by:	DARPA, AFRL
2018-10-18 15:17:58 +00:00
Ruslan Bukin
53c6ad1d62 Support RISC-V implementations that do not manage the A and D bits
(e.g. RocketChip, lowRISC and derivatives).

RISC-V page table entries support A (accessed) and D (dirty) bits. The
spec makes hardware support for these bits optional. Implementations that
do not manage these bits in hardware raise page faults for accesses to a
valid page without A set and writes to a writable page without D set.
Check for these types of faults when handling a page fault and fixup the
PTE without calling vm_fault if they occur.

Reviewed by:	jhb, markj
Approved by:	re (gjb)
Sponsored by:	DARPA, AFRL
Differential Revision:	https://reviews.freebsd.org/D17424
2018-10-18 15:08:14 +00:00
Ed Maste
f2990e6c19 Enable Capsicum on armv6/armv7
We ought to be consistent across our Tier-1 and nearly-Tier-1
architectures, so enable Capsicum for 32-bit armv6/armv7 by default.

PR:		204008
Reviewed by:	ian, oshogbo
Approved by:	re (gjb)
Relnotes:	Yes
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D17023
2018-09-13 21:00:17 +00:00
Warner Losh
592ffb2175 Revert drm2 removal.
Revert r338177, r338176, r338175, r338174, r338172

After long consultations with re@, core members and mmacy, revert
these changes. Followup changes will be made to mark them as
deprecated and prent a message about where to find the up-to-date
driver.  Followup commits will be made to make this clear in the
installer. Followup commits to reduce POLA in ways we're still
exploring.

It's anticipated that after the freeze, this will be removed in
13-current (with the residual of the drm2 code copied to
sys/arm/dev/drm2 for the TEGRA port's use w/o the intel or
radeon drivers).

Due to the impending freeze, there was no formal core vote for
this. I've been talking to different core members all day, as well as
Matt Macey and Glen Barber. Nobody is completely happy, all are
grudgingly going along with this. Work is in progress to mitigate
the negative effects as much as possible.

Requested by: re@ (gjb, rgrimes)
2018-08-24 00:02:00 +00:00
Matt Macy
a965e09972 disconnect drm2 from tegra build until made self-contained 2018-08-22 02:18:45 +00:00
Warner Losh
49a49b37df Move options INTRNG into std.armv6 and std.armv7
INTRNG is required on all armv6 and armv7 systems, so make it
standard.
2018-08-20 20:31:53 +00:00
John Baldwin
8cd385fda0 Make 'device crypto' lines more consistent.
- In configurations with a pseudo devices section, move 'device crypto'
  into that section.
- Use a consistent comment.  Note that other things common in kernel
  configs such as GELI also require 'device crypto', not just IPSEC.

Reviewed by:	rgrimes, cem, imp
Differential Revision:	https://reviews.freebsd.org/D16775
2018-08-18 20:32:08 +00:00
Conrad Meyer
923d206149 arm: Define crypto option on platforms that include IPsec
Missed in r337940.

(It's not like there are any crypto files IPsec doesn't pull in, so it is
unclear what not defining the crypto option was supposed to achieve.)

Reported by:	np@
2018-08-17 01:04:02 +00:00
Andrew Turner
f13a4096b7 Remove PHYSADDR from kernel configurations that don't need it. The only
place we need to set it is when we also have FLASHADDR set.

Sponsored by:	DARPA, AFRL
2018-08-15 13:13:19 +00:00
Andrew Turner
559cb76c51 Remove the VIRT armv7 kernel config. It is supported by GENERIC.
Sponsored by:	DARPA, AFRL
2018-08-15 13:03:01 +00:00
Andrew Turner
b17f3d298d Default to armv5te in LINT on arm. This should fix building LINT there. 2018-08-06 14:40:45 +00:00
Emmanuel Vadot
82533b026a arm: Remove ALLWINNER_UP kernel config
This was needed when we GENERIC couldn't boot on UP system.
2018-08-03 22:15:58 +00:00
Emmanuel Vadot
cfe196fbed nvmem: Add nvmem interface and helpers
The nvmem interface helps provider of nvmem data to expose themselves to consumer.
NVMEM is generally present on some embedded board in a form of eeprom or fuses.
The nvmem api are helpers for consumer to read/write the cell data from a provider.

Differential Revision:	https://reviews.freebsd.org/D16419
2018-07-31 19:08:24 +00:00
Andrew Turner
e57edd3580 Remove now the cow unused CPU_ARM9 and CPU_FA526 options. These are for
ARMv4 CPUs that are no longer supported.
2018-07-28 11:00:45 +00:00
Warner Losh
7eb20343b3 This builds now, so aadd it back to Universe. 2018-07-27 21:26:32 +00:00
Warner Losh
888a313927 Remove xscale support.
As discussed in arm@.  This is a scaled back version of the prior
commit because xscale is overlaoded in places to mean armv5 or
similar.  The OLD XSCALE stuff hasn't been useful in a while. The
original committer (cognet@) was the only one that had boards for
it. He's blessed this removal. Newer XSCALE (GUMSTIX) is for hardware
that's quite old. After discussion on arm@, it was clear there was no
support for keeping it.

Noticed by: andrew@
2018-07-27 21:25:07 +00:00
Warner Losh
c81b12e0d7 Revert r336773: it removed too much.
r336773 removed all things xscale. However, some things xscale are
really armv5. Revert that entirely. A more modest removal will follow.

Noticed by: andrew@
2018-07-27 21:25:01 +00:00
Warner Losh
626930c2fd Remove xscale support
The OLD XSCALE stuff hasn't been useful in a while. The original
committer (cognet@) was the only one that had boards for it. He's
blessed this removal. Newer XSCALE (GUMSTIX) is for hardware that's
quite old. After discussion on arm@, it was clear there was no support
for keeping it.

Differential Review: https://reviews.freebsd.org/D16313
2018-07-27 18:33:09 +00:00
Warner Losh
fb3f4b7549 Make ralink compile again.
Add std.ralink to define common things across all ralink configs.
Add cpu, machine and options INTRNG to this file.
Remove RT1310.hints file reference: that file isn't in our tree.
2018-07-27 18:31:30 +00:00
Warner Losh
848c22d7b1 Remove Cavium/Econa CNS11xx support.
This port hasn't been updated since it was committed, apart from
housekeeping. There's no known users, and the known hardware for
this port is too thin to run FreeBSD/arm these days well.

This also removes the last armv4 port. We've had no reports of armv4
systems working since FreeBSD 8. All the kernel support for armv4 has
not been removed since it's too intertwined with armv5 support (which
remains in the tree).

RelNotes: Yes
No objection from: arm@
2018-07-27 18:30:01 +00:00
Warner Losh
58d5c51106 Remove Atmel AT91RM9200 and AT91SAM9 support.
The last known robust version of this code base was FreeBSD 8.2. There
are no users of this on current, and all users of it have abandoned
this platform or are in legacy mode with a prior version of FreeBSD.

All known users on arm@ approved this removal, and there were no
objections.

Differential Revision: https://reviews.freebsd.org/D16312
2018-07-27 18:28:22 +00:00
Ian Lepore
b89ff96c7d Add option MAC to armv6 and armv7 kernels by default, it needs to be
compiled-in to allow loading policy modules at runtime.
2018-07-21 18:54:24 +00:00
Warner Losh
ff9452772d Remove kernel support for armeb
Remove all the big-endian arm architectures (ixp425 and ixp435)
support in the kernel and associated drivers.

Differential Revision:  https://reviews.freebsd.org/D16257
2018-07-17 23:23:45 +00:00
Ian Lepore
0592ad0252 Oops, fix a typo: imx_snvs should be imx6_snvs. 2018-07-08 21:14:43 +00:00
Ian Lepore
638a5afda9 Move device statements out of std.imx* and into kernel config files.
In the armv4/5 world device statements in these files were common, but in
the v6/7 world, other socs don't put device statements into those files, so
this just brings imx5 and imx6 into line with the current conventions.
2018-07-08 21:09:52 +00:00
Kevin Lo
3fff2af912 Since we don't enable BUF_TRACKING and FULL_BUF_TRACKING buffer debugging
options in GENERIC kernels on arm and arm64, there's no need to disable
them.

Sponsored by:	MSI/FUNTORO
2018-06-05 05:24:42 +00:00
Conrad Meyer
a0638b33f7 Yank crufty INTR_FILTER option
It was introduced to the tree in r169320 and r169321 in May 2007.

It never got much use and never became a kernel default.  The code
duplicates the default path quite a bit, with slight modifications.  Just
yank out the cruft.  Whatever goals were being aimed for can probably be met
within the existing framework, without a flag day option.

Mostly mechanical change: 'unifdef -m -UINTR_FILTER'.

Reviewed by:	mmacy
Sponsored by:	Dell EMC Isilon
Differential Revision:	https://reviews.freebsd.org/D15546
2018-05-24 17:06:00 +00:00
Marcin Wojtas
10ebf6661e Add Marvell ArmadaXP and Armada38X to GENERIC config
Include source files and drivers for Marvell ArmadaXP and Armada38X
in GENERIC kernel config.

Submitted by: Michal Mazur <mkm@semihalf.com>
              Rafal Kozik <rk@semihalf.com>
Reviewed by: manu
Tested by: manu
Obtained from: Semihalf
Sponsored by: Stormshield
2018-05-03 01:23:42 +00:00
Warner Losh
80d19ff404 Remove 'All Rights Reserved.' from all of my Copyrights in sys/arm and
always use 'M. Warner Losh' for consistency.

'All Rights Reserved.' was prescribed by the Buenos Aires Copyright
Convention of 1910, but has been mostly dead since the early 1990's
and completely meaningless since 2000 when Nicaragua ratified the
Berne convention.

Some files not done due to ambiguity of various types.
2018-05-01 16:21:01 +00:00
Emmanuel Vadot
f1012f03d1 arm: dts: overlays: Remove the overlay module
Move the DTSO variables in the main SoC dtb file

Discussed with:		ian
2018-04-27 21:15:51 +00:00
Marcin Wojtas
a3b3bb87cc Revert r333035 due broken booting on !Marvell GENERIC platforms
Reported by: manu
2018-04-27 05:32:09 +00:00
Marcin Wojtas
e3b287fc9e Add Marvell ArmadaXP and Armada38X to GENERIC config
Include source files and drivers for Marvell ArmadaXP and Armada38X
in GENERIC kernel config.

Submitted by: Michal Mazur <mkm@semihalf.com>
	      Rafal Kozik <rk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D14747
2018-04-26 19:23:37 +00:00