Submitted by: bde
rc.i386 failed messily when I used a serial console.
Editors note:
Use file redirection so that all the kbdcontrol and vidcontrol
commands act upon /dev/ttyv0 instead of stdin. Though this feature
is not documented it is the intended behavior of {vid,kbd}control
and shall be documented in the future as such.
Change root.flp from a new format CPIO archive to a tar archive.
Unless we're willing to change the main tarballs from tar format to
"newc" (or, even better, "crc") cpio format, we need to use one common
one for all and that's tar for now. Install will now grab "root floppy"
from an ftp site if that's what you've got set.
Fix even more gripes from Poul's list.
P.S. As soon as I get the distfiles copied over to freefall tomorrow
morning, those of you wishing to test minimal installs over ftp should
be able to do so by grabbing the boot floppy and nothing else. Keep
your eyes open for my announcement.
Change root.flp from a new format CPIO archive to a tar archive.
Unless we're willing to change the main tarballs from tar format to
"newc" (or, even better, "crc") cpio format, we need to use one common
one for all and that's tar for now. Install will now grab "root floppy"
from an ftp site if that's what you've got set.
Fix even more gripes from Poul's list.
Root floppy (which actually may be able to go completely away at some point
soon!) is now loadable from ftp/nfs/dos as well as CDROM and (of course)
floppy.
Fix more problems on Poul's Gripe List.
Rod, Jordan and David have more or less given me the OK on this
with the understanding that it doesn't change any functionality.
It doesn't: these are bug fixes only. No other part of the system
should be affected. Of course, since I'm the only one working on
NIS, you'll just have to take my word on it. :)
Fixes for the following annoyingly subtle bugs:
- ypbindproc_setdom_2 is supposed to be declared void *, not boot_t *,
and it fails to correctly signal failures back to the ypset(8) command:
we need to call one of the svcerr_*() functions (in this case,
svcerr_noprog() seems a logical choice -- we're really cheating
a bit here because nothing else quite fits) to tell ypset that the
attempt to set the binding for a domain failed. If we don't do this,
failed ypset attempts either appear (incorrectly) to succeed, or
they time out.
- The lock handling for child processes isn't quite right. The
child broadcaster processes have to release all locks on the
binding files and the ypbind.lock file.
- The parent ypbind process will SEGV if you do the following:
-- start ypbind with the -ypset or -ypsetme flag
-- type 'ypwhich -d random_unserved_domain'
-- type 'ypset -d random_unserved_domain anyhost'
-- type 'ypwhich -d random_unserved_domain' again
-- wait about 60 seconds
What happens is this: the ypwhich command causes ypbind to fork a
broadcaster process that searches for a server for random_unserved_domain.
If you then use ypset to force a binding while this process is still alive,
the state flags that tell the ypbind parent process that the child
is running will be cleared. The second ypwhich command then causes
a *second* child process to be forked for random_unserved_domain,
which is verbotten. When the first broadcaster exits and tells the
parent that it wasn't able to find a server for the domain, the parent
clobbers the entry for random_unserved_domain. Then the second broadcaster
exits and the same thing happens, only trying to clobber the entry
twice causes a SEGV.
The fix for this is a slight change in program structure: since we
can't have more than one broadcaster for a given domain at a time,
we save the pipe descriptors and pid for the child broadcaster in members
of the _dom_binding struct for the domain. (As a side effect, we
can get rid of the global child_fds variable.) So when rpc_received()
finds that it's been asked to do a ypset for a domain for which a
broadcaster process exists, it sends a SIGINT to the child to kill it
and closes the pipe to the now-dead child. This keeps everything in sync
and insures that we don't leak file descriptors.
- ping() should be using YPPROC_DOMAIN rather than YPPROC_DOMAIN_NONACK
when it does its clnt_call() to the server.
- Removed the check for client_handle == NULL in ping() and make
client_handle local to ping instead of a member of the _dom_binding
struct. This fixes another potential ypset problem: using ypset to
force a binding to a machine that has an NIS server but which *doesn't*
support the domain we're after can result in permanently bogus bindings.
- the 'server OK' message prints the wrong IP address.
etc.). The tulip_start routine was rewritten to use less stack space (I've
been having problems with wcarchive overflowing the stack and this should
help a little). This version also has preliminary NetBSD support.
Rod Grimes helped in testing this version of the driver. Thanks Rod. It's
additionally been extensively tested here and on wcarchive.
Submitted by: Matt Thomas
The site in Island has only the 1.1-RELEASE dist.
The previous South Africa sites are dead and the brasilian one
is very hard to get into and painfully slow.
The two South Africa sites come from MIRROR.SITES.
Basically, this is just a simple name change. People were historically
confused by the "cpio floppy", having no clear idea as to what it was
(even if they knew what "cpio" stood for) given that the name gives
one absolutely no indication as to what it's FOR. It's about as content
free as calling it a "data floppy". Root floppy isn't much better, but
it's got some historical weight (Linux divides their set into boot and
root floppies) and is reasonably descriptive for a floppy that comprises
the beginnings of a stand-alone root filesystem.
in machdep.c (it should use the global nmbclusters). Moved the calculation
of nmbclusters into conf/param.c (same place where nmbclusters has always
been assigned), and made the calculation include an extra amount based
on "maxusers". NMBCLUSTERS can still be overrided in the kernel config
file as always, but this change will make that generally unnecessary. This
fixes the "bug" reports from people who have misconfigured kernels seeing
the network hang when the mbuf cluster pool runs out.
Reviewed by: John Dyson
in machdep.c (it should use the global nmbclusters). Moved the calculation
of nmbclusters into conf/param.c (same place where nmbclusters has always
been assigned), and made the calculation include an extra amount based
on "maxusers". NMBCLUSTERS can still be overrided in the kernel config
file as always, but this change will make that generally unnecessary. This
fixes the "bug" reports from people who have misconfigured kernels seeing
the network "hang" when the mbuf cluster pool runs out.
Reviewed by: John Dyson
regular user could panic the machine with a simple "tail /proc/curproc/mem"
command. The problem was twofold: both kernfs and procfs didn't fill in
the mnt_stat statfs struct (which would later lead to an integer divide
fault in the vnode pager), and kernfs bogusly paniced if a bmap was
attempted.
Reviewed by: John Dyson
device.
v_numoutput wasn't incremented to match the b_iodone nesting. It's still
fishy that vwakeup() clears B_WRITEINPROG before biodone() has finished;
however, B_WRITEINPROG seems to be never used.
Submitted by: Bruce Evans
usage is very bad.
And I found some bugs(?) in ja_JP.*/usage.hlp.
1. I have made typo.
2. Mr. Hubbard didn't change about number of virtual consoles.
Submitted by: NIIMI Satoshi <sa2c@and.or.jp>
the National Semiconductor InfoMover PCMCIA cards also. In tests on a
NE4100 on Jordan's laptop here, the ze driver works fine with that
card.
Reviewed by: Jordan Hubbard, Rod Grimes, and me
Submitted by: Gary Palmer
1. Fix a few bugs in the ftp installation code and implement proper
ftp and network shutdown routines.
2. Clean up the menus a fair bit - add a FreeBSD configuration menu.
3. Eliminate the last of the "chaining" - the installation now does
the most obvious thing in the most obvious cases and doesn't present
you with more menus than you were expecting. This makes it necessary to be
a little more explicit in places, but it's still less confusing.
4. Add a few more safety nets for the user. Change a few hard-and-fast
limits to warnings (it now runs as non-root, Bruce).
5. Add descriptions for all the supported ethernet cards.
6. Make the cpio floppy extract put up a menu requesting the drive you wish
to use if you have more than one; don't just always assume drive A.
Add testftp: target
ftp.c:
add more debugging output and fix a few more problems
media_strategy:
make the ftp system actually do something resembling common sense.
it now works after a fashion, although it soon falls over for some
reason.
