This fixes WITH_SYSTEM_COMPILER, WITHOUT_CROSS_COMPILER, external compiler, to
pass the external compiler metadata rather than the ${CC} metadata. On
a build host that has clang as CC it was passing the clang metadata rather than
GCC metadata during the build.
When the low-latency firmware variant is running, it is reported as not
being capable of batching RX events, but it can still do so if the
FORCE_EV_MERGING flag is set on an RXQ. Therefore we need to handle
batched RX events even if the capability isn't set.
If this bug is fixed in the firmware such that the capability is set
even when running the low-latency firmware variant, it will almost
always be reported so I don't think we lose much by removing the check.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6705
This also adjusts the timer values used to match the Linux net
driver implementation:
a) non-zero time intervals should result in at least one quantum
b) timer load/reload values are only zero biased for Falcon/Siena
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6704
code uses the GetTime function from the Runtime Service, however this has
been shown to not return a useable time on many arm64 UEFI implementations.
Reviewed by: jhb, smh
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D6709
leapfile will be ignored and ntpd will behave as if it has no
leapfile.
While here, remove an extraneous blank line.
Suggested by: ache
MFC after: 1 week
BAR size to 1MB. According to Xeon v3 specifications and my tests, that
size register is write-once and so not writeable after BIOS written it.
Instead of that, make the code work with BAR of any sufficient size,
properly calculating offset within its base. It also simplifies the code.
Discussed with: cem
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
NTB_MSIX_RECEIVED status, before making upper layers overwrite it.
This is not completely perfect, but now it works better then before.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Take care of very old bug leading to heap-buffer overflow by
processing certain file headers via bfd binary.
PR: 200888
Obtained from: OpenBSD
MFC after: 2 weeks
Since no WORLDTMP/usr/bin/cc is created, cc cannot be found
during installworld time since /usr/bin is not in the PATH.
Pass along the known compiler metadata to allow installworld
to work. The same fix was used for WITH_SYSTEM_COMPILER.
A better route would be to store a cookie in buildworld
containing this compiler metadata and then using that
at install time, rather than rerunning cc.
Reported by: Mark Millard
Sponsored by: EMC / Isilon Storage Division
Ccache will not affect the output of the objects, so just ignore it for
meta mode handling. This avoids having everything rebuild if ccache is
updated.
Sponsored by: EMC / Isilon Storage Division
The first file in these lists will generate everything else so only
it should be getting a .meta file. With bmake's missing=yes meta
feature these would otherwise cause a rebuild without the
.NOMETA hint.
Sponsored by: EMC / Isilon Storage Division
This breaks cross-building with WITH_META_MODE since it will rebuild
'build-tools' during the 'everything' phase.
A more proper fix is coming to bmake to implicitly require .META unless
.NOMETA (and other restrictions) are in place.
Improvements after r301220.
Bus space methods are not called so simple pmap_mapdev will suffice.
Use OF_getencprop to get buffer with already converted endianess.
Pointed out by: ian
Submitted by: Michal Stanek <mst@semihalf.com>
Obtained from: Semihalf
it's defined, installation image is shipped without source distribution
(src.txz)
Add the hability of defining NOSRC in release.conf and pass it to
'make release' argument
Approved by: gjb
Sponsored by: Rubicon Communications (Netgate)
Differential Revision: https://reviews.freebsd.org/D6710
Reduce number of iterations used for calibrating ICR read loop. The
new number of iteration still gives the same ICR latency as before,
tested on Intel SandyBridge and Haswell machines, and on AMD. But it
significantly reduces the unneeded pause on boot in some VMs, from ~10
secs to less then 1 sec. It was reported to occur in bhyve on AMD
host.
Reported and tested by: avg
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
file, lib/clang/freebsd_cc_version.h, instead of reusing Version.inc.
The header is only included from one .cpp file in the clang tree.
This minimizes the number of .cpp files that need to be rebuilt if the
version is bumped.
Discussed with: bdrewery
This is a followup to r300131.
A filesystem's root vnode can be reached not only through VSF_ROOT, but
by other means as well. For example, via a dot-dot lookup.
Also, a root vnode can get reclaimed and then re-created. For these
reasons it was insufficient to clear VV_ROOT flag from a root vnode of a
snapshot mounted under .zfs in zfsctl_snapdir_lookup().
So, now we set the flag in zfs_znode_sa_init() only if a vnode
represent a root of a filesystem or a standalone snapshot.
That is, the flag is not set for snapshots mounted under .zfs.
MFC after: 2 weeks
Add some missing errno values to thr_new(2) and pthread_create(3).
In particular, EDEADLK was not documented in the latter.
While I'm here, improve some English and cross-references.
Reviewed by: kib
Sponsored by: Dell Inc.
Differential Revision: https://reviews.freebsd.org/D6663
It could happen in an unlikely case that we fail to lock the root vnode
with requested flags (which appear to never include LK_NOWAIT).
MFC after: 1 week
Some consumers actually use this definition.
We probably need some procedure to ensure that SHLIB_VERSION_NUMBER
is updated whenever we change the library version in
secure/lib/libssl/Makefile.
Add accessor functions to toggle the state per VNET.
The base system (vnet0) will always enable itself with the normal
registration. We will share the registered protocol handlers in all
VNETs minimising duplication and management.
Upon disabling netisr processing for a VNET drain the netisr queue from
packets for that VNET.
Update netisr consumers to (de)register on a per-VNET start/teardown using
VNET_SYS(UN)INIT functionality.
The change should be transparent for non-VIMAGE kernels.
Reviewed by: gnn (, hiren)
Obtained from: projects/vnet
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6691
The current error path in case of failure during attach/initialization is
not correct and leaves blkback in a stuck state. This is due to blkback
waiting for blkfront to switch to state XenbusStateClosed, but if blkfront
never attached (because the guest is not even started) it cannot possibly
make it to that state.
Instead just wait for the frontend to be in a state different than
XenbusStateConnected in order to proceed with the shutdown. Also, it is
wrong to call xbb_detach directly because it destroys the lock which can
still be used by xbb_frontend_changed.
Sponsored by: Citrix Systems R&D
Hotplug scripts are needed in order to use fancy disk configurations in xl,
like iSCSI disks. The job of hotplug scripts is to locally attach the disk
and present it to blkback as a block device or a regular file.
This change introduces a new xenstore node in the blkback hierarchy, called
"physical-device-path". This is a straigh replacement for the "params" node,
which was used before.
Hotplug scripts will need to read the "params" node, perform whatever
actions are necessary and then write the "physical-device-path" node. The
hotplug script is also in charge of detaching the disk once the domain has
been shutdown.
Sponsored by: Citrix Systems R&D
controller devices are attached. This has already been done for
bus_setup_intr().
There was no doubt that if someone wants to setup an interrupt,
corresponding interrupt controller device must already be attached.
However, the same must be valid for allocation of an interrupt resource
unless the allocation is done blindly, without any information that
such interrupt even exists. While it was done this blind way before,
it won't be possible after next INTRNG change.
framework has significantly changed the driver has moved to a new file.
While it shares some code with the existing driver this has been modified
to work better with the intrng framework.
This has been tested on the ThunderX servers in the netperf cluster and has
been used to boot them for other testing, including DTrace and hwpmc.
With this we can use intrng on all supported arm64 platforms I was able to
test on. It is expected we will move to intrng soon, and disable the old
arm64 interrupt framework.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6437
range of interrupts they pass to a second controller driver to handle.
The parent driver is expected to detect when one of these interrupts has
been triggered and call intr_child_irq_handler to pass the interrupt to
a child. The children controllers are then expected to manage the range
by allocating interrupts as needed.
This will initially be used by the ARM GICv3 driver, but is is expected to
be useful for other driver where this type of allocation applies.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6436
Replacing the bubble sort with insertion sort gives an 80% reduction
in runtime on average, with randomized keys, for small partitions.
If the keys are pre-sorted, insertion sort runs in linear time, and
even if the keys are reversed, insertion sort is faster than bubble
sort, although not by much.
Update comment describing "tcp_lro_sort()" while at it.
Differential Revision: https://reviews.freebsd.org/D6619
Sponsored by: Mellanox Technologies
Tested by: Netflix
Suggested by: Pieter de Goeje <pieter@degoeje.nl>
Reviewed by: ed, gallatin, gnn, transport
