opcode will be printed. This should solve the problem, when protocol
name is not printed in `ipfw -N show`.
Reported by: Claudio Eichenberger <cei at yourshop.com>
MFC after: 1 week
This change adds a hypervisor trap handler for exception 0x1500 (soft patch),
normalizing all VSX registers and returning.
This avoids a kernel panic due to unknown exception.
Change made with the collaboration of leonardo.bianconi_eldorado.org.br,
that found out that this is a hypervisor exception and not a supervisor one,
and fixed this in the code.
Reviewed by: jhibbits, sbruno
Differential Revision: https://reviews.freebsd.org/D17806
The wpa update added some source files with the same name as a file in
another directory (found via .PATH in the previous version). Having a
stale entry in a .depend file means the new file won't be built, so test
for this case and if found remove all of wpa's dependency files.
MFC with: r341759
Sponsored by: The FreeBSD Foundation
On EF10 HW we can avoid sending packets without checksum offload
or with IP-only checksum offload to dedicated queues. Instead, we
can use option descriptors to change offload policy on any queue
during runtime. Thus, we don't need to create two dedicated queues.
Submitted by: Ivan Malov <Ivan.Malov at oktetlabs.ru>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18390
The number of Tx queues on event queue 0 can depend on the NIC family type,
and this property will be leveraged by future patches.
This patch prepares the code for this change.
Submitted by: Ivan Malov <Ivan.Malov at oktetlabs.ru>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18389
FreeBSD driver needs a patch to provide a means for packets
which do not need checksum offload but have flow ID set
to avoid hitting only the first Tx queue (which has been used
for packets not needing checksum offload).
This should be possible on Huntington, Medford or Medford2 chips
since these support toggling checksum offload on any given queue
dynamically by means of pushing option descriptors.
The patch for FreeBSD driver will then need a means to figure out
whether the feature can be used, and testing adapter family might
not be a good solution.
This patch adds a feature bit specifically to indicate support
for checksum option descriptors. The new feature bits may have
more users in future, apart from the mentioned FreeBSD patch.
Submitted by: Ivan Malov <Ivan.Malov at oktetlabs.ru>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18388
In order to find out why the first event queue and corresponding
interrupt is triggered more frequent, it is useful to know which
events go to each event queue.
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18418
and includes the last block represented by the leaf. The reasoning is that,
if the last block is included, then there must be no solution before that
one in the leaf, so the leaf cannot provide an allocation that big again;
indeed, the leaf cannot provide a solution bigger than range1.
Which is all correct, except that if the value of blk passed in did not
represent the first block of the leaf, because the cursor was pointing to
the middle of the leaf, then a possible solution before the cursor may have
been ignored, and bighint cannot be updated.
Consider the sequence allocate 63 (returning address 0), free 0,63 (freeing
that same block, and allocate 1 (returning 63). The result is that one
block is allocated from the first leaf, and the value of bighint is 0, so
that nothing can be allocated from that leaf until the only block allocated
from that leaf is freed. This change detects that skipped-over solution,
and when there is one it makes sure that the value of bighint is not changed
when the last block is allocated.
Submitted by: Doug Moore <dougm@rice.edu>
Tested by: pho
X-MFC with: r340402
Differential Revision: https://reviews.freebsd.org/D18474
devstat_end_transaction() was called before the i/o was actually ended
(by delivering it to GEOM), so at least the i/o length was messed up.
It was always recorded as 0, so the average transaction size and the
average transfer rate was always displayed as 0.
devstat_end_transaction() was not called at all for the error case, so
there were sometimes multiple starts per end. I didn't observe this in
practice and don't know if it did much damage. I think it extended the
length of the i/o to the next transaction.
Reviewed by: kib
I also learned that 'mips' is overly broad and covers 64bit architectures
too. However, it's not worth the fight right now, so any refinements
will have to come another day.
mpr as a module for powerpc or mips. An upcoming commit will cause these
drivers to rely on the presence of 64bit atomic operations. Discussed
with jhibbits.
With the introduction of M_EXEC support for kmem_malloc(), some kernel
mappings start having NX bit set in the paging structures early, for
PAE kernels on machines with NX support, i.e. practically on all
machines. In particular, AP trampoline and initialization needs to
access pages which translations has NX bit set, before initializecpu()
is called.
Check for CPUID NX feature and enable EFER.NXE before we enable paging
in mp boot trampoline. This allows the CPU to use the kernel page
table instead of generating page fault due to reserved bit set.
PR: 233819
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Use the newly defined SRAT/SLIT parsing APIs in arm64 to support
ACPI based NUMA.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D17943
ACPI SRAT table on arm64 uses GICC entries to provide CPU locality
information. These entries use an AcpiProcessorUid to identify the
CPU (unlike on x86 where the entries have an APIC ID).
Update acpi_pxm.c to extend the cpu_add/cpu_find/cpu_get_info
functions to handle AcpiProcessorUid. Use the updated functions
while parsing ACPI_SRAT_GICC_AFFINITY entry for arm64.
Also update sys/conf/files.arm64 to build acpi_pxm.c when ACPI is
enabled.
Reviewed by: markj (previous version)
Differential Revision: https://reviews.freebsd.org/D17942
This moves the architecture independent parts of sys/x86/acpica/srat.c
to sys/dev/acpica/acpi_pxm.c, to be used later on arm64. The function
declarations are moved to sys/dev/acpica/acpivar.h
We also need to update sys/conf/files.{i386,amd64} to use the new file.
No functional changes.
Reviewed by: markj, imp
Differential Revision: https://reviews.freebsd.org/D17941
The SLIT and SRAT ACPI tables needs to be parsed on arm64 as well, on
systems that use UEFI/ACPI firmware and support NUMA. To do this, we
need to move most of the logic of x86/acpica/srat.c to dev/acpica and
provide an API that architectures can use to parse and configure ACPI
NUMA information.
This commit adds the API in srat.c as a first step, without making any
functional changes. We will move the common code to sys/dev/acpica
as the next step.
The functions added are:
* int acpi_pxm_init(int ncpus, vm_paddr_t maxphys) - to allocate and
initialize data structures used
* void acpi_pxm_parse_tables(void) - parse SRAT/SLIT, save the cpu and
memory proximity information
* void acpi_pxm_set_mem_locality(void) - use the saved data to set
memory locality
* void acpi_pxm_set_cpu_locality(void) - use the saved data to set cpu
locality
* void acpi_pxm_free(void) - free data structures allocated by init
On arm64, we do not have an cpu APIC id that can be used as index to
store CPU data, we need to use the Processor Uid. To help with this,
define internal functions cpu_add, cpu_find, cpu_get_info to store
and get CPU proximity information.
Reviewed by: markj, jhb (previous version)
Differential Revision: https://reviews.freebsd.org/D17940
Although these are slightly obsolete in favor of R_AARCH64_TLSDESC,
gcc -mtls-dialect=trad still use them.
Please note that definition of TLS_DTPMOD64 and TLS_DTPREL64 are incorrectly
exchanged in GNU binutils. TLS_DTPREL64 should be encoded to 1028 (as is
defined in ARM ELF ABI) but binutils encode it to 1029. And vice versa,
TLS_DTPMOD64 should be encoded to 1029 but binutils encode it to 1028.
While I'm in, add also R_AARCH64_NONE. It can be produced as result of linker
relaxation.
MFC after: 1 week
Validate the value of the -l argument (packet length) against the MTU of the netmap port.
In case the netmap port does not refer to a physical interface (e.g. VALE port or pipe), then
the netmap buffer size is used as MTU.
This change also sets a better default value for the -M option, so that pkt-gen uses
the largest possible fragments in case of multi-slot packets.
Differential Revision: https://reviews.freebsd.org/D18436
If all IDs from trypid to pid_max were used as pids, the code would enter
a loop which would be infinite if none of the IDs could become free (e.g.
they all belong to processes which did not transitioned to zombie).
Fixes: r341684 ("Manage process-related IDs with bitmaps")
Sponsored by: The FreeBSD Foundation
kqueue would always relock immediately afterwards.
While here drop the NULL check for list itself. The list is
always allocated.
Sponsored by: The FreeBSD Foundation
Originally read value is still safely kept. Re-reading code was there
for previous iterations which were partially shared with i386.
Sponsored by: The FreeBSD Foundation
When we detected that the vnode is not symlink, return immediately.
This moves the readlink code out of else branch and unindents it.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Braces were put in the wrong place, causing failing EAGAIN check to
return zero result. Remove the problematic assignment from the
conditional expression at all.
While there, remove used once variable vp, and wrap too long line.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
- buf_to_iov() does not use buflen parameter, allowing out of bound read.
- buf_to_iov() leaks memory if seek argument > 0.
- iov_to_buf() doesn't need to reallocate buffer for every segment.
- there is no point to use size_t for iov counts, int is more then enough.
- some iov function arguments can be constified.
- pci_vtscsi_request_handle() used truncate_iov() incorrectly, allowing
getting out of buffer and possibly corrupting data.
- pci_vtscsi_controlq_notify() written returned status at wrong offset.
- pci_vtscsi_controlq_notify() leaked one buffer per event.
Reported by: wg
Reviewed by: araujo
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D18465
Unfortunately ctl_scsi_zero_io() wipes that field, so it was always zero.
While there, targ_port is set by kernel, so user-space should not fill it.
MFC after: 1 week
