Stop trying to manually calculate RID, which cannot be done correctly
by PCI_DEVFN(). Use PCI_GET_RID() method instead.
Do not use pci_find_dbsf() to go from the linux pci_dev to freebsd
device_t. First, device is readily available as dev.bsddev. Second,
using pci_find_dbsf() fails for ARI-enabled functions with large
function numbers, because PCI_SLOT()/PCI_FUNC() are for non-ARI.
Reviewed by: bz, hselasky, manu
Tested by: manu (drm)
Sponsored by: Mellanox Technologies/NVidia Networking
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27960
Everything required for remote kernel debugging over a serial
connection. For FDT-based systems, a debug port can be specified by
setting hw.fdt.dbgport to the desired device tree node in loader.conf.
For example, hw.fdt.dbgport="uart1", or
hw.fdt.dbgport="serial@ff1a0000".
Looks good: emaste
Tested by: rwatson
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27727
Remove wi(4). pccard is going away, and wi only supports PC Card
devices, though it has a minor amount of glue to also support
PCI cards. However, removing the one without removing the other
is hard, so the whole driver is being removed.
Relnotes: Yes
pccard is being removed, so remove bt3c driver since it only has PC
Card attachment. Also remove bt3cfw(8) since it's the firmware for this
driver.
Relnotes: Yes
PC Card support is being removed, so remove its attachment here. ndis
is slated to be removed entirely for 13, but that's not been done yet.
Relnotes: Yes
This change includes:
hpen - Generic / MS Windows compatible HID pen tablet driver.
hgame - Generic game controller and joystick driver.
xb360gp - Xbox360-compatible game controller driver.
Submitted by: Greg V <greg_unrelenting.technology>
Reviewed by: hselasky (as part of D27993)
hidmap is a kernel module that maps HID input usages to evdev events.
Following dependent drivers is included in the commit:
hms - HID mouse driver.
hcons - Consumer page AKA Multimedia keys driver.
hsctrl - System Controls page (Power/Sleep keys) driver.
ps4dshock - Sony DualShock 4 gamepad driver.
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D27993
which installs /dev/uhid# alias to hidraw character device for
compatibility with some existing uhid(4) users like Firefox.
As side effect it renames traditional uhid(4) driver to hidraw
to make possible using of common unit number allocator.
Requested by: Greg V <greg_unrelenting.technology>
Reviewed by: hselasky (as part of D27992)
This driver provides raw access to HID devices through uhid(4)-compatible
interface and is based on pre-8.x uhid(4) code. Unlike uhid(4) it does
not take devices in to monopoly ownership and allows parallel access
from other drivers.
hidraw supports Linux's hidraw-compatible interface as well.
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D27992
This change implements hid_if.m methods for HID-over-USB protocol [1].
Also, this change adds USBHID_ENABLED kernel option which changes
device_probe() priority and adds/removes PnP records to prefer usbhid
over ums, ukbd, wmt and other USB HID device drivers and vice-versa.
The module is based on uhid(4) driver. It is disabled by default for
now due to conflicts with existing USB HID drivers.
[1] https://www.usb.org/sites/default/files/hid1_11.pdf
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D27893
hidquirk(4) is derived from usb_quirk(4) and inherits all its HID-related
functionality. It does not support ioctl(2) interface yet.
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D27890
This driver provides support for multiple HID driver attachments
to single HID transport backend. This ability existed in Net/OpenBSD
(uhidev and ihidev drivers) but has never been ported to FreeBSD.
Unlike Net/OpenBSD we do not use report number alone to distinct report
source but we follow MS way and use a top level collection (TLC) usage
index that report belongs to as a location key.
The driver performs child device autodiscovery based on HID report
descriptor data, proxying of HID requests from child devices to parent
transport backends and broadcasting of interrupts in backward direction.
Differential revision: https://reviews.freebsd.org/D27888
Create an abstract HID interface that provides hardware independent
access to HID capabilities and functions through the device tree.
hid_if.m resembles existing USBHID KPI and consist of next methods:
HID method USBHID variant
-----------------------------------------------------------------------
hid_intr_setup usbd_transfer_setup (INTERRUPT IN xfer)
hid_intr_unsetup usbd_transfer_unsetup (INTERRUPT IN xfer)
hid_intr_start usbd_transfer_start (INTERRUPT IN xfer)
hid_intr_stop usbd_transfer_drain (INTERRUPT IN xfer)
hid_intr_poll usbd_transfer_poll (INTERRUPT IN xfer)
hid_get_rdesc usbd_req_get_report_descriptor
hid_read No direct analog. Not intended for common use.
hid_write uhid(4) write()
hid_get_report usbd_req_get_report
hid_set_report usbd_req_set_report
hid_set_idle usbd_req_set_idle
hid_set_protocol usbd_req_set_protocol
This change is part of D27888
This does an import of quirk stubs, debugging macros from USB code and
numerous usage constants used by dependent drivers.
Besides, this change renames some functions to get a better matching
with userland library and NetBSD/OpenBSD HID code. Namely:
- Old hid_report_size() renamed to hid_report_size_max()
- New hid_report_size() calculates size of given report rather than
maximum size of all reports.
- hid_get_data_unsigned() renamed to hid_get_udata()
- hid_put_data_unsigned() renamed to hid_put_udata()
Compat shim functions are provided in usbhid.h to make possible compile
of legacy code unmodified after this change.
Reviewed by: manu, hselasky
Differential revision: https://reviews.freebsd.org/D27887
It will be used by the upcoming HID-over-i2C implementation. Should be
no-op, except hid.ko module dependency is to be added to affected drivers.
Reviewed by: hselasky, manu
Differential revision: https://reviews.freebsd.org/D27867
Only ACPI attachment is supported for now, some others depend on the
presence of smbios(4) support, which we lack on arm64.
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D28009
After the removal of obsolete GDB 6.1.1 from the base system in
1c0ea326aa we no longer need to downgrade to DWARF2 debug info.
We will need to ensure that our tools (e.g. ctfconvert) handle DWARF5
prior to it becoming the default in the Clang and GCC versions we use.
Reported by: jhb
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
-mno-align-long-strings was a flag maintained by FreeBSD for the
now-deleted in-tree gcc. Upstream gcc has no such flag, so just drop
it.
The flag was originally submitted by bde and committed in 2002 (svn
r97911 & r104455). However, upstream gcc did address this same issue in
2004 (gcc svn r76694 / git 4137ba7ab7a), reducing long string alignment
in general, and to 1 with -Os.
Reviewed by: kib
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D27768
- Suppress -Wredundant-decls. Ultimately this warning is harmless in
any case, and it does not look like there is a simple way to avoid
redundant declarations in this case without a lot of header pollution
(e.g. having openzfs's shim param.h pulling in sys/kernel.h for hz).
- Suppress -Wnested-externs, which is useless anyway.
Unfortunately it was not sufficient just to modify OPENZFS_CFLAGS,
because the warning suppressions need to appear on the command line
after they are explicitly enabled by CWARNFLAGS from sys/conf/kern.mk,
but OPENZFS_CFLAGS get added before due to use of -I for the shims.
Reviewed by: markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D27685
dvl reported that "make installkernel" failed with "amd64/arm64/i386
kernel requires linker ifunc support." This test should apply to builds
only; the linker is not used at install time.
I think the same (ifunc-supporting) linker used to build the kernel
should be detected at install time in usual cases (and so not trigger
this error). However, there is no reason to disallow the install, if
for some reason the expected linker isn't the one tested at install
time.
PR: 251580
Reported by: dvl
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
eventfd is a Linux system call that produces special file descriptors
for event notification. When porting Linux software, it is currently
usually emulated by epoll-shim on top of kqueues. Unfortunately, kqueues
are not passable between processes. And, as noted by the author of
epoll-shim, even if they were, the library state would also have to be
passed somehow. This came up when debugging strange HW video decode
failures in Firefox. A native implementation would avoid these problems
and help with porting Linux software.
Since we now already have an eventfd implementation in the kernel (for
the Linuxulator), it's pretty easy to expose it natively, which is what
this patch does.
Submitted by: greg@unrelenting.technology
Reviewed by: markj (previous version)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D26668
These drivers should have been removed along with tl(4) as part of
7c897ca91f and r347918 respectively
as these fromer made sure to only ever attach to the latter, e. g.:
<...>
static int
tlphy_probe(device_t dev)
{
if (!mii_dev_mac_match(dev, "tl"))
return (ENXIO);
<...>
We have stopped using SVN, so the notes containing the old SVN revisions
are no longer populated, so fall back to purely counting the number of
commits (currently at about 255337).
Also turn the format more into what git-describe produces, with a name
first, then the number of commits and the hash last. Note that as we
don't tag anything on `main`, git describe will never produce something
useful there and finds the newest vendor tag that was merged in instead.
Sample output:
FreeBSD 13.0-CURRENT #6 main-c255126-gb81783dc98e6-dirty
FreeBSD 12.2-STABLE #0 stable/12-c243035-gd16dac42b641-dirty
MFC after: 3 weeks
Reviewed by: imp, glebius
Differential Revision: https://reviews.freebsd.org/D27751
This change introduces framework that allows to dynamically
attach or detach longest prefix match (lpm) lookup algorithms
to speed up datapath route tables lookups.
Framework takes care of handling initial synchronisation,
route subscription, nhop/nhop groups reference and indexing,
dataplane attachments and fib instance algorithm setup/teardown.
Framework features automatic algorithm selection, allowing for
picking the best matching algorithm on-the-fly based on the
amount of routes in the routing table.
Currently framework code is guarded under FIB_ALGO config option.
An idea is to enable it by default in the next couple of weeks.
The following algorithms are provided by default:
IPv4:
* bsearch4 (lockless binary search in a special IP array), tailored for
small-fib (<16 routes)
* radix4_lockless (lockless immutable radix, re-created on every rtable change),
tailored for small-fib (<1000 routes)
* radix4 (base system radix backend)
* dpdk_lpm4 (DPDK DIR24-8-based lookups), lockless datastrucure, optimized
for large-fib (D27412)
IPv6:
* radix6_lockless (lockless immutable radix, re-created on every rtable change),
tailed for small-fib (<1000 routes)
* radix6 (base system radix backend)
* dpdk_lpm6 (DPDK DIR24-8-based lookups), lockless datastrucure, optimized
for large-fib (D27412)
Performance changes:
Micro benchmarks (I7-7660U, single-core lookups, 2048k dst, code in D27604):
IPv4:
8 routes:
radix4: ~20mpps
radix4_lockless: ~24.8mpps
bsearch4: ~69mpps
dpdk_lpm4: ~67 mpps
700k routes:
radix4_lockless: 3.3mpps
dpdk_lpm4: 46mpps
IPv6:
8 routes:
radix6_lockless: ~20mpps
dpdk_lpm6: ~70mpps
100k routes:
radix6_lockless: 13.9mpps
dpdk_lpm6: 57mpps
Forwarding benchmarks:
+ 10-15% IPv4 forwarding performance (small-fib, bsearch4)
+ 25% IPv4 forwarding performance (full-view, dpdk_lpm4)
+ 20% IPv6 forwarding performance (full-view, dpdk_lpm6)
Control:
Framwork adds the following runtime sysctls:
List algos
* net.route.algo.inet.algo_list: bsearch4, radix4_lockless, radix4
* net.route.algo.inet6.algo_list: radix6_lockless, radix6, dpdk_lpm6
Debug level (7=LOG_DEBUG, per-route)
net.route.algo.debug_level: 5
Algo selection (currently only for fib 0):
net.route.algo.inet.algo: bsearch4
net.route.algo.inet6.algo: radix6_lockless
Support for manually changing algos in non-default fib will be added
soon. Some sysctl names will be changed in the near future.
Differential Revision: https://reviews.freebsd.org/D27401
Now that bhyve(8) supports UART, bvmconsole and bvmdebug are no longer needed.
This also removes the '-b' and '-g' flag from bhyve(8). These two flags were
marked deprecated in r368519.
Reviewed by: grehan, kevans
Approved by: kevans (mentor)
Differential Revision: https://reviews.freebsd.org/D27490
