It can be dangerous and there is no need for it in the kernel.
Inspired by Kees Cook's change in Linux, and later OpenBSD.
Reviewed by: cem, gordon, philip
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24760
for custom vendor-specific changes to FreeBSD's
default settings.
While here, fix a typo: perfomance -> performance
PR: 245404
Submitted by: Jose Luis Duran
BINUTILS is needed only for ports, and will be disabled once the failing
ports are addressed (likely by growing a binutils dependency).
BINUTILS_BOOTSTRAP is needed only on amd64, for skein_block_asm.s. There
is no need to enable it on i386.
This will all be removed before FreeBSD 13.0.
With the removal of in-tree consumers of DES, Triple DES, and
MD5-HMAC, the only algorithm this driver still supports is SHA1-HMAC.
This is not very useful as a standalone algorithm (IPsec AH-only with
SHA1 would be the only user).
This driver has also not been kept up to date with the original driver
in OpenBSD which supports a few more cards and AES-CBC on newer cards.
The newest card currently supported by this driver was released in
2005.
Reviewed by: cem
MFC after: 1 week
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24691
source that works or is the new location on the
same page.
Submitted by: alfix86_gmail.com
Approved by: bcr
Differential Revision: https://reviews.freebsd.org/D23769
Save and restore (also known as suspend and resume) permits a snapshot
to be taken of a guest's state that can later be resumed. In the
current implementation, bhyve(8) creates a UNIX domain socket that is
used by bhyvectl(8) to send a request to save a snapshot (and
optionally exit after the snapshot has been taken). A snapshot
currently consists of two files: the first holds a copy of guest RAM,
and the second file holds other guest state such as vCPU register
values and device model state.
To resume a guest, bhyve(8) must be started with a matching pair of
command line arguments to instantiate the same set of device models as
well as a pointer to the saved snapshot.
While the current implementation is useful for several uses cases, it
has a few limitations. The file format for saving the guest state is
tied to the ABI of internal bhyve structures and is not
self-describing (in that it does not communicate the set of device
models present in the system). In addition, the state saved for some
device models closely matches the internal data structures which might
prove a challenge for compatibility of snapshot files across a range
of bhyve versions. The file format also does not currently support
versioning of individual chunks of state. As a result, the current
file format is not a fixed binary format and future revisions to save
and restore will break binary compatiblity of snapshot files. The
goal is to move to a more flexible format that adds versioning,
etc. and at that point to commit to providing a reasonable level of
compatibility. As a result, the current implementation is not enabled
by default. It can be enabled via the WITH_BHYVE_SNAPSHOT=yes option
for userland builds, and the kernel option BHYVE_SHAPSHOT.
Submitted by: Mihai Tiganus, Flavius Anton, Darius Mihai
Submitted by: Elena Mihailescu, Mihai Carabas, Sergiu Weisz
Relnotes: yes
Sponsored by: University Politehnica of Bucharest
Sponsored by: Matthew Grooms (student scholarships)
Sponsored by: iXsystems
Differential Revision: https://reviews.freebsd.org/D19495
- Abbreviated month name in .Dd
- position of HISTORY section
- alphabetical ordering within SEE ALSO section
- adding .Ed before .Sh DESCRIPTION
- remove trailing whitespaces
- Line break after a sentence stop
- Use BSD OS macros instead of hardcoded strings
No .Dd bumps as there was no actual content change made
in any of these pages.
Submitted by: Gordon Bergling gbergling_gmail.com
Approved by: bcr
Differential Revision: https://reviews.freebsd.org/D24591
o Shrink sglist(9) functions to work with multipage mbufs down from
four functions to two.
o Don't use 'struct mbuf_ext_pgs *' as argument, use struct mbuf.
o Rename to something matching _epg.
Reviewed by: gallatin
Differential Revision: https://reviews.freebsd.org/D24598
- Inconsistencies in .Dd like abbreviated month names,
"th" after numbers, or leading zeros
- No line breaks after a sentence stop
- Whitespace at the end of the line
- Use macros for BSD OS names instead of hardcoded names
- CAVEATS instead of CAVEAT in section name
No actual content change in terms of additions were made, so
no bump of the .Dd for these man pages.
All of these issues were found and fixed by Gordon Bergling.
Submitted by: gbergling_gmail.com
Approved by: bcr
Differential Revision: https://reviews.freebsd.org/D24648
This option was added as a transition aide when symbol versioning was
first added. It was enabled by default in 2007 and is supported even
by the old GPLv2 binutils. Trying to disable it currently fails to
build in libc and at this point it isn't worth fixing the build.
Reported by: Michael Dexter
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D24637
A number of components require OpenSSL and fail to build if it is not
enabled. As a first phase force these off under WITHOUT_OPENSSL. A
second phase should make these more fine-grained, allowing the component
to build but without OpenSSL.
PR: 245931
Sponsored by: The FreeBSD Foundation
Gordon Bergling. Hook it up to the build by adding
it to the Makefile.
Submitted by: gbergling_gmail.com
Approved by: bcr
Differential Revision: https://reviews.freebsd.org/D24589
epoch(9).
In one instance, remove a trailing whitespace while here.
Submitted by: gbergling_gmail.com
Approved by: bcr
Differential Revision: https://reviews.freebsd.org/D24243
section, it would result in the following error:
"ngctl: send msg: Invalid argument"
The reason for this is the missing whitespace to
separate the arguments. When adding the whitespace,
the example works as intended.
Submitted by: lutz_donnerhacke.de
Approved by: bcr
Differential Revision: https://reviews.freebsd.org/D23773
- Add a new TCP_RXTLS_ENABLE socket option to set the encryption and
authentication algorithms and keys as well as the initial sequence
number.
- When reading from a socket using KTLS receive, applications must use
recvmsg(). Each successful call to recvmsg() will return a single
TLS record. A new TCP control message, TLS_GET_RECORD, will contain
the TLS record header of the decrypted record. The regular message
buffer passed to recvmsg() will receive the decrypted payload. This
is similar to the interface used by Linux's KTLS RX except that
Linux does not return the full TLS header in the control message.
- Add plumbing to the TOE KTLS interface to request either transmit
or receive KTLS sessions.
- When a socket is using receive KTLS, redirect reads from
soreceive_stream() into soreceive_generic().
- Note that this interface is currently only defined for TLS 1.1 and
1.2, though I believe we will be able to reuse the same interface
and structures for 1.3.
The sysctl output looks like this:
dev.hwpstate_intel.0.epp: 50
dev.hwpstate_intel.0.%parent: cpu0
dev.hwpstate_intel.0.%pnpinfo:
dev.hwpstate_intel.0.%location:
dev.hwpstate_intel.0.%driver: hwpstate_intel
dev.hwpstate_intel.0.%desc: Intel Speed Shift
but all the '%' got escaped in the manual page, un-escape them.
While here:
- Move the example of dev.hwpstate_intel.%d.%parent after the description to
align with others.
- Capitalize "CPU" (*)
Submitted by: danfe (*)
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D24520
The sole in-tree user of this flag has been retired, so remove this
complexity from all drivers. While here, add a helper routine drivers
can use to read the current request's IV into a local buffer. Use
this routine to replace duplicated code in nearly all drivers.
Reviewed by: cem
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D24450
instead of MK_KERBEROS. The reason for this change is some users
prefer to build FreeBSD WITHOUT_KERBEROS, wanting to retain the
Kerberos rc scripts to start/stop MIT Kerberos or Heimdal from ports.
PR: 197337
Reported by: Adam McDougall <ebay at looksharp.net>
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D24252
According to the upstream man page (which we don't install), none of
libauditd's symbols are intended to be public. Also, I can't find any
evidence for a port that uses libauditd. Therefore, we should treat it like
other such libraries and use PRIVATELIB.
Reported by: phk
Reviewed by: cem, emaste
MFC after: 2 weeks
It is not valid to pass BUS_SPACE_UNRESTRICTED to bus_dma_tag_create()'s
nsegments parameter as it is interpreted as a very large segment count.
Subsequent allocation operations on the tag will preallocate some multiple of
that count. BUS_SPACE_UNRESTRICTED therefore indicates something like:
malloc(infinity).
Discussed with: bcr, jhb (earlier version)
This change allows any downstream or otherwise consumer to easily override
the new -fno-common default on a temporary basis without having to hack into
src.sys.mk, and also makes it a bit easier to search for these specific
cases where -fno-common must be overridden with -fcommon or else the build
will fail.
The gdb build, the only program requiring -fcommon on head/, is switched
over as an example usage. It will need it on all branches, so this does not
harm future mergability.
MFC after: 3 days
on all major Linux distributions as well as NetBSD and OpenBSD.
Remove the undocumented ZONEINFO_OLD_TIMEZONES_SUPPORT and the deprecated
OLDTIMEZONES knobs as they are now the default.
Reviewed by: ngie, rgrimes
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24306
