and reinserting it back with an updated key.
This is one of dependencies for the upcoming stats(3) code.
Reviewed by: cem
Obtained from: Netflix
MFC after: 2 weeks
Sponsored by: Klara Inc, Netflix
Differential Revision: https://reviews.freebsd.org/D21786
'sysvipc' - it has nothing to do with ABIs, and I'd like to later
rename 'abi' to 'linux', which better describes its purpose and also
matches the rcvar name.
Reviewed by: emaste
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21615
Clang9/LLD9 appears to get quite confused with the instruction stream used
to obtain the tmpstack pointer, almost as though it thinks this is a C
function, so tries to optimize it. Since the AIM64 method doesn't use the
TOC to obtain the tmpstack, just follow that model, and lld won't get
confused.
Reported by: bdragon
MFC after: 2 weeks
On 64-bit platforms uintptr_t makes the copy twice as large as it should be.
This code isn't actually used in FreeBSD, since it's for guest mode only,
not hypervisor mode, but fixing it for completeness sake.
Reported by: bdragon (clang9 build)
- Ensure that the end of the mapping passed to vm_page_wire() is
page-aligned. vm_page_wire() expects this.
- Wire pages before reading data into them.
- Apply protections specified in the segment descriptor using
vm_map_protect() once relocation processing is done.
- On amd64, ensure that we load KLDs above KERNBASE, since they
are compiled with the "kernel" memory model by default.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21756
We must also check for large mappings. pmap_page_is_mapped() is
mostly used in assertions, so the problem was not very noticeable.
Reviewed by: alc
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21824
run_early_customize is run as a shell list, not as a subshell, so that the side
effects of setting variables can affect later stages of the build (for better or
worse, it's been like this since it was introduced). It therefore has the side
effect of turning off xtrace always, which limits the usefulness of sh -x
nanobsd.sh. Remember the old setting and only turn off tracing after the command
if tracing was off before. All the other places where we do similar things we use
a subshell, so we don't need to do this.
rm -x was introduced in the FreeBSD 10 time frame. 4 years ago I added a
function to cope with building nanobsd images on hosts as old FreeBSD 7 that
lacked rm -x. The workaround is no longer needed as FreeBSD 9 hasn't been
supported for almost 3 years. Eliminate the wrapper and use rm -x directly
again.
This uses the same logic as with the -s option, first validating the
entered value, then storing the result in a struct timeval.
MFC after: 3 days
X-MFC-With: r352818
In r334906, the -s option was changed to allow fractional times, but
this only functioned correctly for batch mode. In interactive mode, any
delay below 1.0 would get floored to zero. This would put top(1) into a
tight loop, which could be difficult to interrupt.
Fix this by storing the -s option value (after validation) into a struct
timeval, and using that struct consistently for delaying with select(2).
Next up is to allow interactive entry of a fractional delay value.
MFC after: 3 days
Software Kernel TLS needs to allocate a new destination crypto
buffer when encrypting data from the page cache, so as to avoid
overwriting shared clear-text file data with encrypted data
specific to a single socket. When the data is anonymous, eg, not
tied to a file, then we can encrypt in place and avoid allocating
a new page. This fixes a bug where the existing code always
assumes the data is private, and never encrypts in place. This
results in unneeded page allocations and potentially more memory
bandwidth consumption when doing socket writes.
When the code was written at Netflix, ktls_encrypt() looked at
private sendfile flags to determine if the pages being encrypted
where part of the page cache (coming from sendfile) or
anonymous (coming from sosend). This was broken internally at
Netflix when the sendfile flags were made private, and the
M_WRITABLE() check was added. Unfortunately, M_WRITABLE() will
always be false for M_NOMAP mbufs, since one cannot just mtod()
them.
This change introduces a new flags field to the mbuf_ext_pgs
struct by stealing a byte from the tls hdr. Note that the current
header is still 2 bytes larger than the largest header we
support: AES-CBC with explicit IV. We set MBUF_PEXT_FLAG_ANON
when creating an unmapped mbuf in m_uiotombuf_nomap() (which is
the path that socket writes take), and we check for that flag in
ktls_encrypt() when looking for anon pages.
Reviewed by: jhb
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21796
TLS 1.3 requires a few changes because 1.3 pretends to be 1.2
with a record type of application data. The "real" record type is
then included at the end of the user-supplied plaintext
data. This required adding a field to the mbuf_ext_pgs struct to
save the record type, and passing the real record type to the
sw_encrypt() ktls backend functions.
Reviewed by: jhb, hselasky
Sponsored by: Netflix
Differential Revision: D21801
The current mechanism is bogus in several ways:
- the limit is a percentage of total entries added, which means negative
entries get evicted all the time even if there are plenty of resources
- evicting code is almost not concurrent, which makes it unable to
remove entries fast enough when doing something as simple as -j 104
buildworld
- there is no support for performing mass removal if necessary
Vast majority of negative entries never get any hits. Only evicting
them when the filesystem demands it results in a significant growth of
the namecache with almost no improvement in the hit ratio.
Sample result about afer 90 minutes of poudriere -j 104:
current no evict % of the original
numneg 219737 2013157 916
numneghits 266711906 263544562 98 [1]
[1] this may look funny but there is a certain dose of variation to the
build
The number was chosen as something which mostly eliminates spurious
evictions during lighter workloads but still keeps the total at bay.
Sponsored by: The FreeBSD Foundation
Continue protecting demotion from the hotlist and selection of the
target list with the ncneg_shrink_lock lock, but drop it before
relocking to zap the node.
While here count how many times we skipped shrinking due to the lock
being already taken.
Sponsored by: The FreeBSD Foundation
Centralize calculation of signal and ucode delivered on unhandled page
fault in new function vm_fault_trap(). MD trap_pfault() now almost
always uses the signal numbers and error codes calculated in
consistent MI way.
This introduces the protection fault compatibility sysctls to all
non-x86 architectures which did not have that bug, but apparently they
were already much more wrong in selecting delivered signals on
protection violations.
Change the delivered signal for accesses to mapped area after the
backing object was truncated. According to POSIX description for
mmap(2):
The system shall always zero-fill any partial page at the end of an
object. Further, the system shall never write out any modified
portions of the last page of an object which are beyond its
end. References within the address range starting at pa and
continuing for len bytes to whole pages following the end of an
object shall result in delivery of a SIGBUS signal.
An implementation may generate SIGBUS signals when a reference
would cause an error in the mapped object, such as out-of-space
condition.
Adjust according to the description, keeping the existing
compatibility code for SIGSEGV/SIGBUS on protection failures.
For situations where kernel cannot handle page fault due to resource
limit enforcement, SIGBUS with a new error code BUS_OBJERR is
delivered. Also, provide a new error code SEGV_PKUERR for SIGSEGV on
amd64 due to protection key access violation.
vm_fault_hold() is renamed to vm_fault(). Fixed some nits in
trap_pfault()s like mis-interpreting Mach errors as errnos. Removed
unneeded truncations of the fault addresses reported by hardware.
PR: 211924
Reviewed by: alc
Discussed with: jilles, markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D21566
The description talks about 'number', while the final argument was
'count'. Since 'count' is already used for the count of displays,
change the final argument name to 'number'.
MFC after: 3 days
vm_page_swapqueue() atomically transitions a page between queues. To do
so, it must hold the page queue lock for the old queue. However, once
the queue index has been updated, the queue lock no longer protects the
page's queue state. Thus, we must speculatively remove the page from
the old queue before committing the queue state update, and roll back if
the update fails.
Reported and tested by: pho
Reviewed by: kib
Sponsored by: Intel, Netflix
Differential Revision: https://reviews.freebsd.org/D21791
Now, vm_page_busy_sleep() expects the page's object to be locked.
vm_object_unwire() does some unusual lazy locking of the object chain
and keeps objects locked until a busy page is encountered or the loop
terminates. When a busy page is encountered, rather than unlocking all
but the "bottom-level" object, we must instead skip the object to which
"tm" belongs.
Reported and tested by: pho
Reviewed by: kib
Discussed with: jeff
Sponsored by: Intel, Netflix
Differential Revision: https://reviews.freebsd.org/D21790
No functional change intended.
The intent is to add a "legacy" e820 pmem newbus bus for nvdimm device in a
subsequent revision, and it's a little more clear if the parent buses get
independent source files.
Quite a lot of ACPI-specific logic is left in nvdimm.c; disentangling that
is a much larger change (and probably not especially useful).
Reviewed by: kib
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D21813
This will allow feature control bits (e.g. for ASLR, PROT_MAX) to be
inspected or modified.
Some clean-up and additional work is likely still required, but we can
iterate on this in the tree.
Submitted by: Bora Özarslan <borako.ozarslan@gmail.com>
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19290
When a VFS option passed to nmount is present but NULL the kernel will
place an empty option in its internal list. This will have a NULL
pointer and a length of 0. When we come to read one of these the kernel
will try to load from the last address of virtual memory. This is
normally invalid so will fault resulting in a kernel panic.
Fix this by checking if the length is valid before dereferencing.
MFC after: 3 days
Sponsored by: DARPA, AFRL
promoted to ints).
- `mode_t` is `uint16_t` (`sys/sys/_types.h`)
- `openat` takes variadic args
- variadic args cannot be 16-bit, and indeed the code uses int
- the manpage currently kinda implies the argument is 16-bit by saying `mode_t`
Prompted by Rust things: https://github.com/tailhook/openat/issues/21
Submitted by: Greg V at unrelenting
Differential Revision: https://reviews.freebsd.org/D21816
The value of struct_kernel_stat64_sz introduced by review D5021 for
RISC-V was incorrect.
Also add a __riscv_xlen == 64 conditional as the 32-bit ABI is not yet
finalized.
Submitted by: Luís Marques
Differential Revision: https://reviews.freebsd.org/D21684
Those functions are used by kernel, and we can't check all possible argument
errors in production kernel. Plus according to docs many of those errors
are checked by hardware. Assertions should just help with code debugging.
MFC after: 2 weeks
from the command line. Prior to this the functionality was mostly there
however since the pool type (-t) was not recognized by the -A and -R
command options -- not recognized by getopt(). Additionally the code to
implement the dynamic add and removal of pools didn't work.
When dynamically adding (-A) a pool a type (-t) to specify if the pool
is a tree or hash pool must be specified. When dynamically removing (-R)
a pool, omitting -t will cause a search-and-destroy which will remove
both types of pools matching the name given (-m).
PR: 218433
MFC after: 1 week
conflicts with the command option of the same name (also -R).
Remove the superfluous and confusing non-global non-command -R option.
PR: 218433
MFC after: 1 week
Only a role of "ipf" is currentlysupported as the other documented
(and undocumented) roles are #ifdef'd out.
The plan is to complete ippool(8) as it is even in its current state
a powerful feature/tool.
PR: 218433
MFC after: 1 month
use epoch don't need Makefile tweaks.
The downside is that any developer who wants EPOCH_TRACE needs to
rebuild kernel in full, but that's fine.
Reviewed by: imp
