IPX was a network transport protocol in Novell's NetWare network operating
system from late 80s and then 90s. The NetWare itself switched to TCP/IP
as default transport in 1998. Later, in this century the Novell Open
Enterprise Server became successor of Novell NetWare. The last release
that claimed to still support IPX was OES 2 in 2007. Routing equipment
vendors (e.g. Cisco) discontinued support for IPX in 2011.
Thus, IPX won't be supported in FreeBSD 11.0-RELEASE.
(1) Invoke cpp to bring in files via #include (although the old
/include/ stuff is supported still).
(2) bring in files from either vendor tree or freebsd-custom files
when building.
(3) move all dts* files from sys/boot/fdt/dts to
sys/boot/fdt/dts/${MACHINE} as appropriate.
(4) encode all the magic to do the build in sys/tools/fdt/make_dtb.sh
so that the different places in the tree use the exact same logic.
(5) switch back to gpl dtc by default. the bsdl one in the tree has
significant issues not easily addressed by those unfamiliar with
the code.
commit 1b41f6de7c
Author: Brooks Davis <brooks@one-eyed-alien.net>
Date: Mon Jan 27 22:59:02 2014 +0000
Now that mtree is always nmtree use it as mtree
Tested on: ref9-amd64
X-MFC after: never
Sponsored by: DARPA, AFRL
require tests in order to build or install. Crucially, don't try to
install tests during the lib32 install phase. This commit supersedes
r261081, which fixed the lib32 install phase problem, but didn't fix
other phases.
Submitted by: Garrett Cooper
Reviewed by: sjg
MFC after: 13 days
were a little broken and not automatable, with unix_seqpacket_test.
It's coverage is a superset of the old tests and it uses ATF. It
includes test cases for bugs kern/185813 and kern/185812.
PR: kern/185812
PR: kern/185813
Sponsored by: Spectra Logic
MFC after: 2 weeks
drivers and their firmware were under active development, but those days
have passed. The firmware now exists in pre-compiled form, no longer
dependent on it's sources or on aicasm. If you wish to rebuild the
firmware from source, the glue still exists under the 'make firmware'
target in sys/modules/aic7xxx.
This also fixes the problem introduced with r257777 et al with building
kernels the old fashioned way in sys/$arch/compile/$CONFIG when the
ahc/ahd drivers were included.
giving access to functionality that is not available in capability mode
sandbox. The functionality can be precisely restricted.
Start with the following services:
- system.dns - provides API compatible to:
- gethostbyname(3),
- gethostbyname2(3),
- gethostbyaddr(3),
- getaddrinfo(3),
- getnameinfo(3),
- system.grp - provides getgrent(3)-compatible API,
- system.pwd - provides getpwent(3)-compatible API,
- system.random - allows to obtain entropy from /dev/random,
- system.sysctl - provides sysctlbyname(3-compatible API.
Sponsored by: The FreeBSD Foundation
by hastctl(8), hastd(8) and auditdistd(8) and will soon be also used
by casperd(8) and its services. There is no documentation and pjdlog.h
header file is not installed in /usr/include/ to keep it private.
Unfortunately we don't have /lib/private/ at this point, only
/usr/lib/private/, so the library is installed in /lib/.
Sponsored by: The FreeBSD Foundation
FreeBSD systems usually implemented this as a third party module and
our implementation hasn't played as nicely with the old way as it could
have.
To that end:
* Rename the iconv* symbols in libc.so.7 to have a __bsd_ prefix.
* Provide .symver compatability with existing 10.x+ binaries that
referenced the iconv symbols. All existing binaries should work.
* Like on Linux/glibc systems, add a libc_nonshared.a to the ldscript
at /usr/lib/libc.so.
* Move the "iconv*" wrapper symbols to libc_nonshared.a
This should solve the runtime ambiguity about which symbols resolve
to where. If you compile against the iconv in libc, your runtime
dependencies will be unambiguous.
Old 9.x libraries and binaries will always resolve against their
libiconv.so.3 like they did on 9.x. They won't resolve against libc.
Old 10.x binaries will be satisified by the .symver helpers.
This should allow ports to selectively compile against the libiconv
port if needed and it should behave without ambiguity now.
Discussed with: kib
This is to ensure that test-related directories don't get needlessly
created (and later deleted) when MK_TESTS=no.
Problem found by jhb@.
Approved by: rpaulo (mentor)
CTF data. Otherwise FreeBSD Update builds think every kernel file has
changed every time there's a security advisory, since the FreeBSD Update
build code isn't smart enough to look inside CTF data to ignore those
changes.
Pointy hat to: cperciva
MFC after: 1 day, or before the next BETA
the kernel itself: If building for the same architecture as the build host,
the kernel build assumes that the host toolchain is capable of building the
kernel. If it's not, "make kernel-toolchain" will bootstrap a new set of
tools that will work.
With this change the same assumptions are made for building kernel tools,
and the existing host toolchain is used to do the build (notably, the build
doesn't link the tools with the legacy libraries, which may not even exist).
If ever for some reason the host toolchain isn't capable of building the
kernel tools, then doing a "make kernel-toolchain" will bootstrap newer
tools to get the job done.
So when built as part of buildworld or kernel-toolchain, the kernel tools
are built using the XMAKE (via BMAKE) commands and environment. When built
as part of building just the kernel on a same-target host, the tools are
built using the new KTMAKE commands and environment. What doesn't jump
out at you in the diffs is that the difference between BMAKE and KTMAKE
is that BMAKE contains this magic line which changes how the build is done
because it changes what files get included for .include <bsd.prog.mk> and
other standard includes:
MAKEFLAGS="-m ${.CURDIR}/tools/build/mk ${.MAKEFLAGS}"
and KTMAKE doesn't, and contains this instead:
TOOLS_PREFIX=${WORLDTMP}
Hopefully this brings the "how to build aicasm with the right toolchain"
saga to a conclusion that works in all usage scenarios that have
historically been supported.
There is no reason to keep the two knobs separate: if tests are
enabled, the ATF libraries are required; and if tests are disabled,
the ATF libraries are not necessary. Keeping the two just serves
to complicate the build.
Reviewed by: freebsd-testing
Approved by: rpaulo (mentor)
Some tests may require C++ so we must ensure this library exists as part
of the bootstrap process or else they will fail to build. Do this by
just depending on lib/atf as part of the bootstrap libraries instead of
using lib/atf/libatf-c.
Submitted by: Garrett Cooper <yaneurabeya at gmail dot com>
Approved by: rpaulo (mentor)
The addition of the TESTS knob and its enabling of the build of tests in
lib/libcrypt/tests/ broke the build. The reason is that we cannot descend
into tests/ subdirectories until all prerequisites have been built, which
in the case of tests may be "a lot of things" (libatf-c in this case).
Ensure that we do not walk tests/ directories during the bootstrapping of
the libraries as part of buildworld.
Reviewed by: freebsd-testing
Approved by: rpaulo (mentor)
during kernel build (if they didn't get done with world). This will make
-DMODULES_WITH_WORLD work, and it ensures the kernel tools are built
as part of 'make kernel-toolchain'.
kernel tools the way cross-tools get built. This seems to result in the
tool getting installed in the right place. It also seems more correct in
retrospect, because if a tool emitted code or binary data as part of
building the kernel, it should do so in target-specific ways (endianess,
architecture, whatever). That issue is moot for aicasm, our only current
tool, but it still seems to be more correct in principle.
proper kernel-tools step/target modeled after the world build-tools stuff.
This is a re-do of r257730 which was backed out in r257734, but this time
it's one byte smaller... a leftover trailing backslash resulted in a .for
loop with no rules, so no compiler stuff got built and later steps built
with the wrong toolset.
Make head/ buildable again, instead of spewing garbage like:
/src/gnu/lib/csu/../../../contrib/gcc/config/rs6000/crtsavres.asm:280:
Error: no such instruction: `lwz 28,-16(11)'
components instead of with the kernel and/or modules. This ensures that it
gets built with the host compiler, not the compiler in obj/... used to build
the target components (which may be a cross-compiler outputting code for a
different architecture and using header files with types and options set up
for the wrong architecture).
Reviewed by: imp
Makefile.inc1 is being called in sub-make's where make(1) would,
by default, implicitly chdir(2) to ${.OBJDIR} before executing any
targets. This would make some targets, like delete-old, when trying
to derive various variables introduced by change r256921 using
``make -f Makefile.inc1'' that also rely on SRCDIR to fail.
This changeset adds an explicit cd ${.CURDIR} before these unwrapped
make calls, making them in line with the other ones that are already
being wrapped with the explicit chdir's.
Tested by: gjb
MFC after: 5 days
Populate /usr/tests with the only test programs that currently live
in the tree (those in lib/libcrypt/tests/) and add all the build
machinery to accompany this change.
In particular:
- Add a WITHOUT_TESTS variable that users can define to request that
no tests be put in /usr/tests.
- Add a top-level Kyuafile for /usr/tests and a way to create similar
Kyuafiles in top-level subdirectories.
- Add a BSD.tests.dist file to define the directory layout of
/usr/tests.
Submitted by: Julio Merino jmmv google.com
Reviewed by: sjg
MFC after: 2 weeks
This should have been reverted with the stable/10/Makefile.inc1
revert, but apparently my commit did not go through.
Discussed with: cperciva (originally)
The VERSION variable is encoded into the SUNW_ctf sections of the kernel
and every kernel module when dtrace is enabled; starting with 9.2-RELEASE
(when dtrace was turned on in GENERIC) this means that different host kernels
will result in very different kernel binaries being generated. This tripped
up freebsd-update builds after the build boxes were updated from 9.x to 10.x.
MFC after: 3 days (stable/9)
X-MFC after: 0 days (stable/10)
Security: Rendered two members of so@ temporarily insane
bootstrapping a copy of clang without building clang for the base system
which is useful for nanobsd and similar setups. It's still probably
wrong to conflate what is installed as /usr/bin/cc with the selection
of a bootstrap compiler under WITH*_CLANG_IS_CC, but that's for another
day.
MFC after: 1 week
Sponsored by: DARPA/AFRL
files created by WITH_DEBUG_FILES. Also cleanup .symbols files from
the period between r244236 when .symbols were supported and r251512
when they were renamed to .debug.
Only propose to delete a .debug file if the corresponding library
itself was deleted already.
Reported by: des
Reviewed by: emaste (earlier version)
Approved by: bapt
MFC after: 3 days
broken. None of our kernels can boot armv6eb. The little-endian kernels do
not have the required code to be able to switch endian when running a
big-endian executable.
Approved by: re (gjb)
since r249893, by adding a separate _installcheck_world and
_installcheck_kernel so the destination targets can be more explicit
on which they are needed for.
installcheck will call both, while installworld only calls
_installcheck_world and installkernel only calls _installcheck_kernel
While here, mark the internal targets as starting with _.
Reported by: des
Reviewed by: des
Pointyhat to: bdrewery
Approved by: re (delphij)
as static binaries, if desired. The one exception is sshd, which runs
into trouble due to libpam.a's includion of pam_ssh.
Make OpenSSH use LDNS if available. This allows it to verify signed
SSHFP records.
Approved by: re (blanket)
we don't want to expose but which can't or shouldn't be static.
To mark a library as private, define PRIVATELIB in its Makefile. It
will be installed in LIBPRIVATEDIR, which is normally /usr/lib/private
(or /usr/lib32/private for 32-bit libraries on 64-bit platforms).
To indicate that a program or library depends on a private library,
define USEPRIVATELIB in its Makefile. The correct version of
LIBPRIVATEDIR will be added to its run-time library search path.
Approved by: re (blanket)
This is the gsoc-2011 project to clean up and backport multibyte support
from other nvi forks in a form we can use.
USE_WIDECHAR is on unless building for the rescue crunchgen. This should
allow editing in the native locale encoding.
USE_ICONV depends on make.conf having 'WITH_ICONV=YES' for now. This
adds the ability to do things like edit a KOI8-R file while having $LANG
set to (say) en_US.UTF-8. iconv is used to transcode the characters for
display.
Other points:
* It uses gencat and catopen/etc instead of homegrown msg catalog stuff.
* A lot of stuff has been trimmed out, eg: the perl and tcl bindings which
we could never use in base anyway.
* It uses ncursesw when in widechar mode. This could be interesting.
GSoC info: http://www.google-melange.com/gsoc/proposal/review/google/gsoc2011/zy/1
Repo at: https://github.com/lichray/nvi2
Obtained from: Zhihao Yuan <lichray@gmail.com>
If WITH_DEBUG_FILES is set the standalone debug data will be excluded
from each ${dist}.txz and placed in a ${dist}.debug.txz.
Submitted by: gjb
Reviewed by: brooks
Run hierarchy with WORLDTMP in the path so it works when it is invoked
directly. Such use is nearly alwasy wrong but appears to be common.[1]
PR: conf/178209 [0], conf/178547 [1]
Submitted by: Garrett Cooper <yaneurabeya@gmail.com> [0]
MFC after: 5 days
so that job token pipe is passed to them.
To avoid surprising anyone, only add .MAKE to ${TGTS} when -n
has not been specified (at least for Makefile).
Reviewed by: obrien
debug files for userland programs and libraries. The "-g" debug flag
is automatically applied when WITH_DEBUG_FILES is set.
The debug files are now named ${prog}.debug and ${shlib}.debug for
consistency with other systems and documentation. In addition they are
installed under /usr/lib/debug, to simplify the process of installing
them if needed after a crash. Users of bsd.{prog,lib}.mk outside of the
base system place the standalone debug files in a .debug subdirectory.
GDB automatically searches both of these directories for standalone
debug files.
Thanks to everyone who contributed changes, review, and testing during
development.
For example, WITHOUT_SHAREDOCS= in src.conf creates an empty doc
distribution.
Submitted by: Kurt Lidl
Tested by: Kurt Lidl
Discussed with: gjb
MFC after: 1 week
or SUP_UPDATE.
CVS exporter for head/ is turned off for nearly one month now.
It is finally time to swing the ax at these update methods.
Reviewed by: eadler
MFC after: 1 month
the switch to bmake. The rescue bits are built via crunchgen,
which didn't respect the MAKE environment variable until r237574
(i.e. ~11 months ago). This resulted in a failure due to bmake's
internal -J flag being passed around and not being understood by
the standard (i.e. host's) make.
Note that the failure is conditional upon having the jobServer
feature enabled within bmake.
the system compiler is not clang. clang and gcc appear to differ
signficantly in their interpretation of -isystem and --sysroot. Further
work is likely required to support an external gcc.
Reported by: andreast, fidaj@ukr.net, sergey.dyatko@gmail.com
specified by passing the XCC, XCXX, and XCPP variables (corresponding to
CC, CXX, and CPP) to buildworld/buildkernel. The compiler must be clang
or be configured to target the appropriate architecture.
To speed build times, if XCC is an absolute path or
WITHOUT_CROSS_COMPILER is defined then no cross compiler will be built
during the cross-tools stage.
Limited documentation of this feature can currently be found at:
https://wiki.freebsd.org/ExternalToolchain
This functionality should be considered experimental and is subject to
change without notice.
Sponsored by: DARPA, AFRL
Discussed with: imp, sjg
and CHECK_GIDS to exist since r152680. This is only needed for
installworld. The documented procedure of running mergemaster -p
to check for missing users is only needed for installworld, not
for installkernel. This fixes auditdistd incorrectly being
required for installkernel.
PR: misc/174405
Approved by: bapt
upcoming 3.3 release (branching and freezing expected in a few weeks).
Preliminary release notes can be found at the usual location:
<http://llvm.org/docs/ReleaseNotes.html>
An MFC is planned once the actual 3.3 release is finished.
example, on 9.1.
* To fix clang add an _xb-bootstrap-tools target that mirrors the existing
bootstrap-tools target in the full world.
* For libc have the compiler use the newly installed includes, and, while
here, tell the compiler about the xdev library path as some other
libraries will link against the installed libraries.
bootstrap liby. This was not readily apparent, because a normal 'make
buildworld' or 'make toolchain' builds liby before building anything
that uses yacc. However, 'make kernel-toolchain' does not build
headers or libraries, so it was not possible to build a kernel from
head on, say, stable/9 without first building the complete toolchain.
MFC after: 1 week
- Use ln -fs to create a symlink.
- Remove pkgadd for docports.
- Use WITHOUT_JADETEX=yes instead of WITH_JADETEX=no.
- Add {WORLD,KERNEL}_FLAGS to [BTWK]MAKE.
- Use makefs(8) and gpart(8) for sparc64 ISO image[2].
- Add publisher option to makefs(8)[2].
Based on work by: gjb[1]
Discussed with: marius, nwhitehorn[2]
targets to be run without root privilege.
Information about ownership, group, flags, and suid bits are stored in
the file specified by METALOG which defaults to ${DESTDIR}/METALOG.
This file can be used in conjunction with bsdtar or makefs to generate
archives or file system images with correct permissions.
The packageworld target has been altered to use this metadata allowing
non-root releases (subject to further changes in release/Makefile.)
Sponsored by: DARPA, AFRL
Reviewed by: ian, ray
be used on the host system (and not installed on the device, if required). The
GPL'd one is still available if there are any devices that need it (make
universe passes with it, including kernels that use fdt, but there may be some
out-of-tree ones). WITH_GPL_DTC can be used to select the old one, for now.
Probably won't be MFC'd, but we'll remove the GPL'd version in head after the
new one has had a lot more testing and ship it in 10.0.
- If update method is SUP_UPDATE or CVS, warn that those
update methods are deprecated.
- While here, remove bogus NO_WWWUPDATE.
MFC after: 3 days
X-MFC-with: r245756
mtree in a shell loop so there is only one mtree commandline. Move the
implementation of LOCAL_MTREE into etc/Makefile.
Sponsored by: DARPA, AFRL
Reviewed by: mtree :)
of files other than the actual libraries.
Use LIBRARIES_ONLY to supress the inclusion of files in the lib32
distribution that are duplicates of files in base.
Sponsored by: DARPA, AFRL
Reviewed by: emaste
installing. This allows things like running installworld for 10-CURRENT
on a 9.0-RELEASE system without adding extra users and groups to the
passwd and group files.
To prevent potentially risky uid/gid mismatches on systems with
non-standard local values, require that DESTDIR be set if DB_FROM_SRC is
set.
Sponsored by: DARPA, AFRL
Reviewed by: peter
may be installed as cc and we don't need to build gcc as a
cross-tools, we still build gcc and thus need cc_tools built
as a build tool. Not doing this results in building gengenrtl with
the target compiler while we need to run it on the build machine.
but committing it helps to get everyone on the same page and makes
sure we make progress.
Tinderbox breakages that are the result of this commit are entirely
the committer's fault -- in other words: buildworld testing on amd64
only.
Credits follow:
Submitted by: Garrett Cooper <yanegomi@gmail.com>
Sponsored by: Isilon Systems
Based on work by: keramida@
Thanks to: gnn@, mdf@, mlaier@, sjg@
Special thanks to: keramida@
system mtree files via a LOCAL_MTREE variable which contains a list of
mtree files to be applyed along with the base mtree files to the tmp root
and DESTDIR.
CC, CXX and LD. This fix implements the intended as it should have been
implemented all along: by passing AS, CC, CXX and LD on the commandline
of the sub-make instead of in the environment of the sub-make.
Breakage pointed-out by: dim@
1. Don't do upgrade_checks when using bmake. As long as we have WITH_BMAKE,
there's a bootstrap complication in ths respect. Avoid it. Make the
necessary changes to have upgrade_checks work wth bmake anyway.
2. Remove the use of -E. It's not needed in our build because we use ?= for
the respective variables, which means that we'll take the environment
value (if any) anyway.
3. Properly declare phony targets as phony as bmake is a lot smarter (and
thus agressive) about build avoidance.
4. Make sure CLEANFILES is complete and use it on .NOPATH. bmake is a lot
smarter about build avoidance and should not find files we generate in
the source tree. We should not have files in the repository we want to
generate, but this is an easier way to cross this hurdle.
5. Have behavior under bmake the same as it is under make with respect to
halting when sub-commands fail. Add "set -e" to compound commands so
that bmake is informed when sub-commands fail.
6. Make sure crunchgen uses the same make as the rest of the build. This
is important when the make utility isn't called make (but bmake for
example).
7. While here, add support for using MAKEOBJDIR to set the object tree
location. It's the second alternative bmake looks for when determining
the actual object directory (= .OBJDIR).
Submitted by: Simon Gerraty <sjg@juniper.net>
Submitted by: John Van Horne <jvanhorne@juniper.net>
type of compiler is being used (currently clang or gcc). COMPILER_TYPE
is set in the new bsd.compiler.mk file based on the value of the CC
variable or, should it prove informative, by running ${CC} --version
and examining the output.
To avoid negative performance impacts in the default case and correct
value for COMPILER_TYPE type is determined and passed in the environment
of submake instances while building world.
Replace adhoc attempts at determining the compiler type by examining
CC or MK_CLANG_IS_CC with checks of COMPILER_TYPE. This eliminates
bootstrapping complications when first setting WITH_CLANG_IS_CC.
Sponsored by: DARPA, AFRL
Reviewed by: Yamaya Takashi <yamayan@kbh.biglobe.ne.jp>, imp, linimon
(with some modifications post review)
MFC after: 2 weeks
is something for make(1) to consume. Bmake gives output such as:
"warning: Couldn't read shell's output for "/bin/sh -c true"
Note we parted from traditional Pmake behavior in r18864 / r18255.
r238211:
Support TARGET_ARCH=armv6 and TARGET_ARCH=armv6eb
This adds a new TARGET_ARCH for building on ARM
processors that support the ARMv6K multiprocessor
extensions. In particular, these processors have
better support for TLS and mutex operations.
This mostly touches a lot of Makefiles to extend
existing patterns for inferring CPUARCH from ARCH.
It also configures:
* GCC to default to arm1176jz-s
* GCC to predefine __FreeBSD_ARCH_armv6__
* gas to default to ARM_ARCH_V6K
* uname -p to return 'armv6'
* make so that MACHINE_ARCH defaults to 'armv6'
It also changes a number of headers to use
the compiler __ARM_ARCH_XXX__ macros to configure
processor-specific support routines.
Submitted by: Tim Kientzle <kientzle@freebsd.org>
Add a LOCAL_LIB_DIRS variable to complement the existing LOCAL_DIRS
and LOCAL_TOOL_DIRS variables. Directories in LOCAL_LIB_DIRS are
built at the end of the _generic_libs target.
Reviewed by: imp (212854)
stages (build-tools, cross-tools, etc) of the build, so we can detect in
bsd.*.mk whether to pass compiler-specific flags to ${CC}.
In particular, this commit will allow using WITH_CLANG_IS_CC when the
base compiler is still gcc, and when ${CC}, ${CXX} and ${CPP} are left
at their defaults. The early stages will then be built using gcc, and
no clang-specific flags will be passed to it. The later stages will be
built as usual.
The EARLY_BUILD define can also serve other uses, such as building the
world stage C++ executables with libc++ instead of libstdc++: during the
early build stages, we cannot assume libc++ is already available, so we
must still build with libstdc++ at that time.
MFC after: 1 week
This makes our naming scheme more closely match other systems and the
expectations of much third-party software. MIPS builds which are little-endian
should require and exhibit no changes. Big-endian TARGET_ARCHes must be
changed:
From: To:
mipseb mips
mipsn32eb mipsn32
mips64eb mips64
An entry has been added to UPDATING and some foot-shooting protection (complete
with warnings which should become errors in the near future) to the top-level
base system Makefile.
several new kerberos related libraries and applications to FreeBSD:
o kgetcred(1) allows one to manually get a ticket for a particular service.
o kf(1) securily forwards ticket to another host through an authenticated
and encrypted stream.
o kcc(1) is an umbrella program around klist(1), kswitch(1), kgetcred(1)
and other user kerberos operations. klist and kswitch are just symlinks
to kcc(1) now.
o kswitch(1) allows you to easily switch between kerberos credentials if
you're running KCM.
o hxtool(1) is a certificate management tool to use with PKINIT.
o string2key(1) maps a password into key.
o kdigest(8) is a userland tool to access the KDC's digest interface.
o kimpersonate(8) creates a "fake" ticket for a service.
We also now install manpages for some lirbaries that were not installed
before, libheimntlm and libhx509.
- The new HEIMDAL version no longer supports Kerberos 4. All users are
recommended to switch to Kerberos 5.
- Weak ciphers are now disabled by default. To enable DES support (used
by telnet(8)), use "allow_weak_crypto" option in krb5.conf.
- libtelnet, pam_ksu and pam_krb5 are now compiled with error on warnings
disabled due to the function they use (krb5_get_err_text(3)) being
deprecated. I plan to work on this next.
- Heimdal's KDC now require sqlite to operate. We use the bundled version
and install it as libheimsqlite. If some other FreeBSD components will
require it in the future we can rename it to libbsdsqlite and use for these
components as well.
- This is not a latest Heimdal version, the new one was released while I was
working on the update. I will update it to 1.5.2 soon, as it fixes some
important bugs and security issues.
the cross-tools stage, if CC=clang and WITH_CLANG_IS_CC is not set.
This causes no 'cc' to be installed in the temporary cross-tools tree,
making lint fall over later in the build, because it ignores ${CC} and
attempts to run 'cc' anyway.
To fix this, only skip building gcc during cross-tools, if WITHOUT_GCC
is set, or if WITH_CLANG_IS_CC is set.
Pointy hat to: dim
MFC after: 2 weeks
installs clang as /usr/bin/cc, /usr/bin/c++ and /usr/bin/cpp.
Note this does *not* disable building and installing gcc, which will
still be available as /usr/bin/gcc, /usr/bin/g++ and /usr/bin/gcpp. If
you want to disable gcc completely, you must use WITHOUT_GCC.
MFC after: 2 weeks
to the default from the top-level Makefile. Therefore, invocations of
lex and yacc (used during building of aicasm) will use the executables
in /usr/bin, not those optionally built during the previous buildworld
or kernel-toolchain. This makes kernel builds from older FreeBSD
releases more difficult than necessary.
Fix this by setting PATH to ${BPATH}:${PATH} in stage 2.3, so the
bootstrap tools directories are searched before the regular ones.
Silence from: svn-src-{all,head}
MFC after: 1 week
kernels specified by KERNCONF are built and packed into release.
The first one is packed into kernel.txz, all others to
kernel.CONFIG.txz.
The first one is installed on bootables in /boot.
Things such as "sh" require local tools to be built before
cross-compiling. This allows for extra software (that's
built via LOCAL_DIRS) to also have a build-tools target where
required.
for our gcc since more than three years (see r181534, which is also in
stable/9 and stable/8). This flag used to be for the benefit of the old
in-kernel math emulator, which was removed more than eight years ago.
Pointed out by: arundel
MFC after: 1 week
defined based on WITH/WITHOUT_CTF settings, default is WITHOUT_CTF,
NO_CTF overrides WITH_CTF (used by Makefile.inc1)
- CTFCONVERT_CMD/NORMAL_CTFCONVERT are now defined to empty string
if make(1) can handle empty commands
not disabled in the usual way (by adding it to __DEFAULT_NO_OPTIONS in
share/mk/bsd.own.mk), and because the test for MK_LIBCPLUSPLUS in
Makefile.inc1 was incorrect.
Pointy hat to: dim
MK_LIBCPLUSPLUS=yes to enable). This is a work-in-progress. It works for
me, but is not guaranteed to work for anyone else and may eat your dog.
To build C++ using libc++, add -stdlib=libc++ to your CXX and LD flags.
Bug reports welcome, bug fixes even more welcome...
Approved by: dim (mentor)
doesn't have ${WORLDTMP}/usr/bin in its PATH, if you build world with
CC=clang, tblgen tools from /usr/bin will be used instead of the ones
built under ${WORLDTMP}. This can lead to various errors, especially if
you upgrade from an older clang.
Note that building world with gcc would not experience these problems,
because it only uses the tblgen tools in the world stage, where PATH
does contain ${WORLDTMP}/usr/bin.
Pointy hat to: dim
bootstrap-tools stage to the cross-tools stage. These tools are only
needed for generating llvm/clang include files, and are not necessary
for bootstrapping the build itself.
This shaves off some build time, because the required libraries are now
just built twice (during the cross-tools and world stages), instead of
three times.
Also, if you build world using WITHOUT_CLANG= in src.conf(5), no llvm or
clang code will be compiled at all anymore.
MFC after: 1 week
make.conf(5), while allowing the build32 stage on 64-bit architectures
to still override them, so that stage can successfully build 32-bit
compatibility libraries.
Explanation:
1) The build32 stage sets environment variables CC, CXX, AS and LD for
its sub-make, to add 32-bit specific flags (-m32 and such).
2) The sub-make reads sys.mk, encounters CC?= and CXX?= assignments, so
does not alter them.
3) After some other stuff, sys.mk reads /etc/make.conf. When you have
"CC=xxx" and "CXX=yyy" statements in there, they will *override* the
build32-supplied CC/CXX values, nullifying the 32-bit specific flags.
4) Thus all objects get built as 64-bit anyway, and since LD is usually
not set in make.conf, it still has the 32-bit flags!
5) Now, whenever something is linked, you will get a "ld: Relocatable
linking with relocations from format elf64-x86-64-freebsd (foo.o) to
format elf32-i386-freebsd (bar.o) is not supported" error.
Fix this by adding "-ECC -ECXX -EAS -ELD" to the build32 sub-make
invocation, which forces those environment variables to always override
any assignment in makefiles. Thus making it possible to simply set:
CC=my-cc
CXX=my-c++
in your make.conf, or specify a path, even:
CC=/usr/local/bin/other-cc
CXX=/usr/local/bin/other-c++
Note this was never a problem on i386, since it has no build32 stage.
Silence from: current@
MFC after: 1 week
There are two problems with the existing logic. It builds gensnmptree
on <700018, even if WITHOUT_BSNMP is set, but more importantly, we must
not forget to build gensnmptree on systems that have originally been
built without. This causes a buildworld on those systems to fail.
MFC after: 1 week
digit beyond your time.
Various sysinstall dependencies (e.g. libftpio, libdisk, libodialog, etc.)
will be cleaned up in coming days. Some will take longer than others due to
a few other consumers (tzsetup and sade).
kerberos libraries were not linked properly (missing dependencies),
which causes 3rd party applications linking to fail when --as-needed
ld flag is used. I also added the --no-undefined ld(1) flag to make
sure that there're no missing dependencies.
MFC after: 3 days
doc/, and now www/ trees, but only using the "cvsup" transport.
When "make update" is run using a tree's makefile, it can also use
"cvs" (except for www/) and "svn" (only src/).
Clean up documentation and code regarding "make update":
- Increase oddness by adding support for WWWSUPFILE and NO_WWWUPDATE to
Makefile.inc1 (analogous to PORTSSUPFILE/NO_PORTSUPDATE and
DOCSUPFILE/NO_DOCUPDATE; WWWSUPFILE already supported by www/Makefile).
- Document all trees that support CVS_UPDATE.
- Document all trees that support SUP_UPDATE.
- Document SVN_UPDATE.
- Document NO_WWWUPDATE.
- make.conf(5) mistakenly said that *SUPFILE* had defaults.
- Add an example entry for WWWSUPFILE.
one. Without this, we don't have ar or randlib in the tool path,
leading to much pain for some users. This pain is exposed by the
external toolchain enhancements that I'm working on.
Submitted by: John Hein (ages ago, and dropped on the floor by me: sorry)
Some files keep the SUN4V tags as a code reference, for the future,
if any rewamped sun4v support wants to be added again.
Reviewed by: marius
Tested by: sbruno
Approved by: re
WITHOUT_CLANG.
Don't build clang bootstrap/build-tools depending on this flag. We also
keep gperf, devd and libstdc++ around to prevent foot-shooting and to
make this a two-way street.
Make fdt default on arm and powerpc.
This now includes cross compiled targets, where before we tried to
make it host-based.
Also, move the lists of default yes and no options to a variable.
In general, only build tools should get this treatment in bsd.own.mk.
Also, the use of TARGET* in the bsd.*mk files is discouraged, but
necessary here due to the ordering of things in buildworld. We make
the native case work by testing MACHINE_ARCH after TARGET_ARCH.
OLD_FILES/OLD_DIRS/OLD_LIBS lists.
If you specify enough WITHOUT_FOO flags, the argument list passed to the
shell will be too long. Using .for/.endfor make(1) "loop" will make the
parser of the Makefile explode. Hack around this with good old pipes.
No objections: netchild
Reported by: b.f.
infrastructure to use it. make distributeworld can now be used without
preparing its environment first and installs games into its distribution
using the regular make distribute logic instead of post-processing with
a script.
Also add two new targets, packageworld and packagekernel, that tar up the
results of distributeworld and distributekernel (also new), respectively.
setting. It can be built by setting the WITH_ICONV knob. While this
knob is unset, the library part, the binaries, the header file and
the metadata files will not be built or installed so it makes no impact
on the system if left turned off.
This work is based on the iconv implementation in NetBSD but a great
number of improvements and feature additions have been included:
- Some utilities have been added. There is a conversion table generator,
which can compare conversion tables to reference data generated by
GNU libiconv. This helps ensuring conversion compatibility.
- UTF-16 surrogate support and some endianness issues have been fixed.
- The rather chaotic Makefiles to build metadata have been refactored
and cleaned up, now it is easy to read and it is also easier to add
support for new encodings.
- A bunch of new encodings and encoding aliases have been added.
- Support for 1->2, 1->3 and 1->4 mappings, which is needed for
transliterating with flying accents as GNU does, like "u.
- Lots of warnings have been fixed, the major part of the code is
now WARNS=6 clean.
- New section 1 and section 5 manual pages have been added.
- Some GNU-specific calls have been implemented:
iconvlist(), iconvctl(), iconv_canonicalize(), iconv_open_into()
- Support for GNU's //IGNORE suffix has been added.
- The "-" argument for stdin is now recognized in iconv(1) as per POSIX.
- The Big5 conversion module has been fixed.
- The iconv.h header files is supposed to be compatible with the
GNU version, i.e. sources should build with base iconv.h and
GNU libiconv. It also includes a macro magic to deal with the
char ** and const char ** incompatibility.
- GNU compatibility: "" or "char" means the current local
encoding in use
- Various cleanups and style(9) fixes.
Approved by: delphij (mentor)
Obtained from: The NetBSD Project
Sponsored by: Google Summer of Code 2009
A full featured groff is required during buildworld, so build it always
and don't rely on it being present on the host system.
vgrind(1) is tightly coupled to a roff processor and will not be
built/installed when groff is disabled. Also much of the roff'ed
documentation under share/doc will not be built/installed when
WITHOUT_GROFF is defined.
Reviewed by: ru (partial)
seem to work when building xdev anymore (most likely my changes lately
moving the TARGET guessing stuff to Makefile from Makefile.inc1, but I
really don't grok why). Fix make xdev by putting them on the command
line. This will work either way while I try to figure it out.
make sure we define it for the xdev stuff.
Move xdev stuff to be last again in this file.
# xdev-build works now, but xdev-install appears to be broken though.
invocations of Makefile.inc1 (since that's supposed to be an internal
interface for world and related targets). Document this with a .error
message. For a transition period, support passing in just TARGET, but
give a .warning for that case: I plan on removing it in 9.0...
need to do this because variables specified on the command line
override those specified in the Makefile. This is why we also moved
from TARGET to _TARGET in Makefile, and then set TARGET on the command
line when we fork a submake with Makefile.inc1.
This makes mips/mips work again, even without the workaround committed to
lib/libc/Makefile.
Implement MACHINE_ARCH=mips64e[lb] to build N64 images. This replaces
MACHINE_ARCH=mipse[lb] TARGET_ABI=n64.
MACHINE_ARCH=mipsn32e[lb] has been added, but currently requires
WITHOUT_CDDL due to atomic issues in libzfs. I've not investigated
this much, but implemented this to preserve as much of the TARGET_ABI
functionality that I could. Since its presence doesn't affect the
working cases, I've kept it in for now.
Added mips64e[lb] to make universe, so more kernels build.
And I think this (finally) closes the curtain on the tbemd tree.
libcompiler_rt.a is a BSD licensed C language runtime, which implements
many routines which are linked into binaries on architectures where
certain functionality is missing (e.g. 64 bits mul/div on i386).
Unfortunately, libcompiler_rt cannot replace libgcc entirely. Certain
features, such as an unwinder for exception handling, are missing.
That's why only libgcc.a is replaced for now, because this one does seem
to be complete.
Tested by: rene (amd64), nwhitehorn (powerpc), droso (i386 exprun)
and many others. Thanks!
Obtained from: user/ed/compiler-rt
and 3.3 (build the modules). IMHO, this makes it a little easier to
track the progress of a kernel build using whereintheworld et al.
MFC after: 3 weeks
