debug files for userland programs and libraries. The "-g" debug flag
is automatically applied when WITH_DEBUG_FILES is set.
The debug files are now named ${prog}.debug and ${shlib}.debug for
consistency with other systems and documentation. In addition they are
installed under /usr/lib/debug, to simplify the process of installing
them if needed after a crash. Users of bsd.{prog,lib}.mk outside of the
base system place the standalone debug files in a .debug subdirectory.
GDB automatically searches both of these directories for standalone
debug files.
Thanks to everyone who contributed changes, review, and testing during
development.
For example, WITHOUT_SHAREDOCS= in src.conf creates an empty doc
distribution.
Submitted by: Kurt Lidl
Tested by: Kurt Lidl
Discussed with: gjb
MFC after: 1 week
or SUP_UPDATE.
CVS exporter for head/ is turned off for nearly one month now.
It is finally time to swing the ax at these update methods.
Reviewed by: eadler
MFC after: 1 month
the switch to bmake. The rescue bits are built via crunchgen,
which didn't respect the MAKE environment variable until r237574
(i.e. ~11 months ago). This resulted in a failure due to bmake's
internal -J flag being passed around and not being understood by
the standard (i.e. host's) make.
Note that the failure is conditional upon having the jobServer
feature enabled within bmake.
the system compiler is not clang. clang and gcc appear to differ
signficantly in their interpretation of -isystem and --sysroot. Further
work is likely required to support an external gcc.
Reported by: andreast, fidaj@ukr.net, sergey.dyatko@gmail.com
specified by passing the XCC, XCXX, and XCPP variables (corresponding to
CC, CXX, and CPP) to buildworld/buildkernel. The compiler must be clang
or be configured to target the appropriate architecture.
To speed build times, if XCC is an absolute path or
WITHOUT_CROSS_COMPILER is defined then no cross compiler will be built
during the cross-tools stage.
Limited documentation of this feature can currently be found at:
https://wiki.freebsd.org/ExternalToolchain
This functionality should be considered experimental and is subject to
change without notice.
Sponsored by: DARPA, AFRL
Discussed with: imp, sjg
and CHECK_GIDS to exist since r152680. This is only needed for
installworld. The documented procedure of running mergemaster -p
to check for missing users is only needed for installworld, not
for installkernel. This fixes auditdistd incorrectly being
required for installkernel.
PR: misc/174405
Approved by: bapt
upcoming 3.3 release (branching and freezing expected in a few weeks).
Preliminary release notes can be found at the usual location:
<http://llvm.org/docs/ReleaseNotes.html>
An MFC is planned once the actual 3.3 release is finished.
example, on 9.1.
* To fix clang add an _xb-bootstrap-tools target that mirrors the existing
bootstrap-tools target in the full world.
* For libc have the compiler use the newly installed includes, and, while
here, tell the compiler about the xdev library path as some other
libraries will link against the installed libraries.
bootstrap liby. This was not readily apparent, because a normal 'make
buildworld' or 'make toolchain' builds liby before building anything
that uses yacc. However, 'make kernel-toolchain' does not build
headers or libraries, so it was not possible to build a kernel from
head on, say, stable/9 without first building the complete toolchain.
MFC after: 1 week
- Use ln -fs to create a symlink.
- Remove pkgadd for docports.
- Use WITHOUT_JADETEX=yes instead of WITH_JADETEX=no.
- Add {WORLD,KERNEL}_FLAGS to [BTWK]MAKE.
- Use makefs(8) and gpart(8) for sparc64 ISO image[2].
- Add publisher option to makefs(8)[2].
Based on work by: gjb[1]
Discussed with: marius, nwhitehorn[2]
targets to be run without root privilege.
Information about ownership, group, flags, and suid bits are stored in
the file specified by METALOG which defaults to ${DESTDIR}/METALOG.
This file can be used in conjunction with bsdtar or makefs to generate
archives or file system images with correct permissions.
The packageworld target has been altered to use this metadata allowing
non-root releases (subject to further changes in release/Makefile.)
Sponsored by: DARPA, AFRL
Reviewed by: ian, ray
be used on the host system (and not installed on the device, if required). The
GPL'd one is still available if there are any devices that need it (make
universe passes with it, including kernels that use fdt, but there may be some
out-of-tree ones). WITH_GPL_DTC can be used to select the old one, for now.
Probably won't be MFC'd, but we'll remove the GPL'd version in head after the
new one has had a lot more testing and ship it in 10.0.
- If update method is SUP_UPDATE or CVS, warn that those
update methods are deprecated.
- While here, remove bogus NO_WWWUPDATE.
MFC after: 3 days
X-MFC-with: r245756
mtree in a shell loop so there is only one mtree commandline. Move the
implementation of LOCAL_MTREE into etc/Makefile.
Sponsored by: DARPA, AFRL
Reviewed by: mtree :)
of files other than the actual libraries.
Use LIBRARIES_ONLY to supress the inclusion of files in the lib32
distribution that are duplicates of files in base.
Sponsored by: DARPA, AFRL
Reviewed by: emaste
installing. This allows things like running installworld for 10-CURRENT
on a 9.0-RELEASE system without adding extra users and groups to the
passwd and group files.
To prevent potentially risky uid/gid mismatches on systems with
non-standard local values, require that DESTDIR be set if DB_FROM_SRC is
set.
Sponsored by: DARPA, AFRL
Reviewed by: peter
may be installed as cc and we don't need to build gcc as a
cross-tools, we still build gcc and thus need cc_tools built
as a build tool. Not doing this results in building gengenrtl with
the target compiler while we need to run it on the build machine.
but committing it helps to get everyone on the same page and makes
sure we make progress.
Tinderbox breakages that are the result of this commit are entirely
the committer's fault -- in other words: buildworld testing on amd64
only.
Credits follow:
Submitted by: Garrett Cooper <yanegomi@gmail.com>
Sponsored by: Isilon Systems
Based on work by: keramida@
Thanks to: gnn@, mdf@, mlaier@, sjg@
Special thanks to: keramida@
system mtree files via a LOCAL_MTREE variable which contains a list of
mtree files to be applyed along with the base mtree files to the tmp root
and DESTDIR.
CC, CXX and LD. This fix implements the intended as it should have been
implemented all along: by passing AS, CC, CXX and LD on the commandline
of the sub-make instead of in the environment of the sub-make.
Breakage pointed-out by: dim@
1. Don't do upgrade_checks when using bmake. As long as we have WITH_BMAKE,
there's a bootstrap complication in ths respect. Avoid it. Make the
necessary changes to have upgrade_checks work wth bmake anyway.
2. Remove the use of -E. It's not needed in our build because we use ?= for
the respective variables, which means that we'll take the environment
value (if any) anyway.
3. Properly declare phony targets as phony as bmake is a lot smarter (and
thus agressive) about build avoidance.
4. Make sure CLEANFILES is complete and use it on .NOPATH. bmake is a lot
smarter about build avoidance and should not find files we generate in
the source tree. We should not have files in the repository we want to
generate, but this is an easier way to cross this hurdle.
5. Have behavior under bmake the same as it is under make with respect to
halting when sub-commands fail. Add "set -e" to compound commands so
that bmake is informed when sub-commands fail.
6. Make sure crunchgen uses the same make as the rest of the build. This
is important when the make utility isn't called make (but bmake for
example).
7. While here, add support for using MAKEOBJDIR to set the object tree
location. It's the second alternative bmake looks for when determining
the actual object directory (= .OBJDIR).
Submitted by: Simon Gerraty <sjg@juniper.net>
Submitted by: John Van Horne <jvanhorne@juniper.net>
type of compiler is being used (currently clang or gcc). COMPILER_TYPE
is set in the new bsd.compiler.mk file based on the value of the CC
variable or, should it prove informative, by running ${CC} --version
and examining the output.
To avoid negative performance impacts in the default case and correct
value for COMPILER_TYPE type is determined and passed in the environment
of submake instances while building world.
Replace adhoc attempts at determining the compiler type by examining
CC or MK_CLANG_IS_CC with checks of COMPILER_TYPE. This eliminates
bootstrapping complications when first setting WITH_CLANG_IS_CC.
Sponsored by: DARPA, AFRL
Reviewed by: Yamaya Takashi <yamayan@kbh.biglobe.ne.jp>, imp, linimon
(with some modifications post review)
MFC after: 2 weeks
is something for make(1) to consume. Bmake gives output such as:
"warning: Couldn't read shell's output for "/bin/sh -c true"
Note we parted from traditional Pmake behavior in r18864 / r18255.
r238211:
Support TARGET_ARCH=armv6 and TARGET_ARCH=armv6eb
This adds a new TARGET_ARCH for building on ARM
processors that support the ARMv6K multiprocessor
extensions. In particular, these processors have
better support for TLS and mutex operations.
This mostly touches a lot of Makefiles to extend
existing patterns for inferring CPUARCH from ARCH.
It also configures:
* GCC to default to arm1176jz-s
* GCC to predefine __FreeBSD_ARCH_armv6__
* gas to default to ARM_ARCH_V6K
* uname -p to return 'armv6'
* make so that MACHINE_ARCH defaults to 'armv6'
It also changes a number of headers to use
the compiler __ARM_ARCH_XXX__ macros to configure
processor-specific support routines.
Submitted by: Tim Kientzle <kientzle@freebsd.org>
Add a LOCAL_LIB_DIRS variable to complement the existing LOCAL_DIRS
and LOCAL_TOOL_DIRS variables. Directories in LOCAL_LIB_DIRS are
built at the end of the _generic_libs target.
Reviewed by: imp (212854)
stages (build-tools, cross-tools, etc) of the build, so we can detect in
bsd.*.mk whether to pass compiler-specific flags to ${CC}.
In particular, this commit will allow using WITH_CLANG_IS_CC when the
base compiler is still gcc, and when ${CC}, ${CXX} and ${CPP} are left
at their defaults. The early stages will then be built using gcc, and
no clang-specific flags will be passed to it. The later stages will be
built as usual.
The EARLY_BUILD define can also serve other uses, such as building the
world stage C++ executables with libc++ instead of libstdc++: during the
early build stages, we cannot assume libc++ is already available, so we
must still build with libstdc++ at that time.
MFC after: 1 week
This makes our naming scheme more closely match other systems and the
expectations of much third-party software. MIPS builds which are little-endian
should require and exhibit no changes. Big-endian TARGET_ARCHes must be
changed:
From: To:
mipseb mips
mipsn32eb mipsn32
mips64eb mips64
An entry has been added to UPDATING and some foot-shooting protection (complete
with warnings which should become errors in the near future) to the top-level
base system Makefile.
several new kerberos related libraries and applications to FreeBSD:
o kgetcred(1) allows one to manually get a ticket for a particular service.
o kf(1) securily forwards ticket to another host through an authenticated
and encrypted stream.
o kcc(1) is an umbrella program around klist(1), kswitch(1), kgetcred(1)
and other user kerberos operations. klist and kswitch are just symlinks
to kcc(1) now.
o kswitch(1) allows you to easily switch between kerberos credentials if
you're running KCM.
o hxtool(1) is a certificate management tool to use with PKINIT.
o string2key(1) maps a password into key.
o kdigest(8) is a userland tool to access the KDC's digest interface.
o kimpersonate(8) creates a "fake" ticket for a service.
We also now install manpages for some lirbaries that were not installed
before, libheimntlm and libhx509.
- The new HEIMDAL version no longer supports Kerberos 4. All users are
recommended to switch to Kerberos 5.
- Weak ciphers are now disabled by default. To enable DES support (used
by telnet(8)), use "allow_weak_crypto" option in krb5.conf.
- libtelnet, pam_ksu and pam_krb5 are now compiled with error on warnings
disabled due to the function they use (krb5_get_err_text(3)) being
deprecated. I plan to work on this next.
- Heimdal's KDC now require sqlite to operate. We use the bundled version
and install it as libheimsqlite. If some other FreeBSD components will
require it in the future we can rename it to libbsdsqlite and use for these
components as well.
- This is not a latest Heimdal version, the new one was released while I was
working on the update. I will update it to 1.5.2 soon, as it fixes some
important bugs and security issues.
the cross-tools stage, if CC=clang and WITH_CLANG_IS_CC is not set.
This causes no 'cc' to be installed in the temporary cross-tools tree,
making lint fall over later in the build, because it ignores ${CC} and
attempts to run 'cc' anyway.
To fix this, only skip building gcc during cross-tools, if WITHOUT_GCC
is set, or if WITH_CLANG_IS_CC is set.
Pointy hat to: dim
MFC after: 2 weeks
installs clang as /usr/bin/cc, /usr/bin/c++ and /usr/bin/cpp.
Note this does *not* disable building and installing gcc, which will
still be available as /usr/bin/gcc, /usr/bin/g++ and /usr/bin/gcpp. If
you want to disable gcc completely, you must use WITHOUT_GCC.
MFC after: 2 weeks
to the default from the top-level Makefile. Therefore, invocations of
lex and yacc (used during building of aicasm) will use the executables
in /usr/bin, not those optionally built during the previous buildworld
or kernel-toolchain. This makes kernel builds from older FreeBSD
releases more difficult than necessary.
Fix this by setting PATH to ${BPATH}:${PATH} in stage 2.3, so the
bootstrap tools directories are searched before the regular ones.
Silence from: svn-src-{all,head}
MFC after: 1 week
kernels specified by KERNCONF are built and packed into release.
The first one is packed into kernel.txz, all others to
kernel.CONFIG.txz.
The first one is installed on bootables in /boot.
Things such as "sh" require local tools to be built before
cross-compiling. This allows for extra software (that's
built via LOCAL_DIRS) to also have a build-tools target where
required.
for our gcc since more than three years (see r181534, which is also in
stable/9 and stable/8). This flag used to be for the benefit of the old
in-kernel math emulator, which was removed more than eight years ago.
Pointed out by: arundel
MFC after: 1 week
defined based on WITH/WITHOUT_CTF settings, default is WITHOUT_CTF,
NO_CTF overrides WITH_CTF (used by Makefile.inc1)
- CTFCONVERT_CMD/NORMAL_CTFCONVERT are now defined to empty string
if make(1) can handle empty commands
not disabled in the usual way (by adding it to __DEFAULT_NO_OPTIONS in
share/mk/bsd.own.mk), and because the test for MK_LIBCPLUSPLUS in
Makefile.inc1 was incorrect.
Pointy hat to: dim
MK_LIBCPLUSPLUS=yes to enable). This is a work-in-progress. It works for
me, but is not guaranteed to work for anyone else and may eat your dog.
To build C++ using libc++, add -stdlib=libc++ to your CXX and LD flags.
Bug reports welcome, bug fixes even more welcome...
Approved by: dim (mentor)
doesn't have ${WORLDTMP}/usr/bin in its PATH, if you build world with
CC=clang, tblgen tools from /usr/bin will be used instead of the ones
built under ${WORLDTMP}. This can lead to various errors, especially if
you upgrade from an older clang.
Note that building world with gcc would not experience these problems,
because it only uses the tblgen tools in the world stage, where PATH
does contain ${WORLDTMP}/usr/bin.
Pointy hat to: dim
bootstrap-tools stage to the cross-tools stage. These tools are only
needed for generating llvm/clang include files, and are not necessary
for bootstrapping the build itself.
This shaves off some build time, because the required libraries are now
just built twice (during the cross-tools and world stages), instead of
three times.
Also, if you build world using WITHOUT_CLANG= in src.conf(5), no llvm or
clang code will be compiled at all anymore.
MFC after: 1 week
make.conf(5), while allowing the build32 stage on 64-bit architectures
to still override them, so that stage can successfully build 32-bit
compatibility libraries.
Explanation:
1) The build32 stage sets environment variables CC, CXX, AS and LD for
its sub-make, to add 32-bit specific flags (-m32 and such).
2) The sub-make reads sys.mk, encounters CC?= and CXX?= assignments, so
does not alter them.
3) After some other stuff, sys.mk reads /etc/make.conf. When you have
"CC=xxx" and "CXX=yyy" statements in there, they will *override* the
build32-supplied CC/CXX values, nullifying the 32-bit specific flags.
4) Thus all objects get built as 64-bit anyway, and since LD is usually
not set in make.conf, it still has the 32-bit flags!
5) Now, whenever something is linked, you will get a "ld: Relocatable
linking with relocations from format elf64-x86-64-freebsd (foo.o) to
format elf32-i386-freebsd (bar.o) is not supported" error.
Fix this by adding "-ECC -ECXX -EAS -ELD" to the build32 sub-make
invocation, which forces those environment variables to always override
any assignment in makefiles. Thus making it possible to simply set:
CC=my-cc
CXX=my-c++
in your make.conf, or specify a path, even:
CC=/usr/local/bin/other-cc
CXX=/usr/local/bin/other-c++
Note this was never a problem on i386, since it has no build32 stage.
Silence from: current@
MFC after: 1 week
There are two problems with the existing logic. It builds gensnmptree
on <700018, even if WITHOUT_BSNMP is set, but more importantly, we must
not forget to build gensnmptree on systems that have originally been
built without. This causes a buildworld on those systems to fail.
MFC after: 1 week
digit beyond your time.
Various sysinstall dependencies (e.g. libftpio, libdisk, libodialog, etc.)
will be cleaned up in coming days. Some will take longer than others due to
a few other consumers (tzsetup and sade).
kerberos libraries were not linked properly (missing dependencies),
which causes 3rd party applications linking to fail when --as-needed
ld flag is used. I also added the --no-undefined ld(1) flag to make
sure that there're no missing dependencies.
MFC after: 3 days
doc/, and now www/ trees, but only using the "cvsup" transport.
When "make update" is run using a tree's makefile, it can also use
"cvs" (except for www/) and "svn" (only src/).
Clean up documentation and code regarding "make update":
- Increase oddness by adding support for WWWSUPFILE and NO_WWWUPDATE to
Makefile.inc1 (analogous to PORTSSUPFILE/NO_PORTSUPDATE and
DOCSUPFILE/NO_DOCUPDATE; WWWSUPFILE already supported by www/Makefile).
- Document all trees that support CVS_UPDATE.
- Document all trees that support SUP_UPDATE.
- Document SVN_UPDATE.
- Document NO_WWWUPDATE.
- make.conf(5) mistakenly said that *SUPFILE* had defaults.
- Add an example entry for WWWSUPFILE.
one. Without this, we don't have ar or randlib in the tool path,
leading to much pain for some users. This pain is exposed by the
external toolchain enhancements that I'm working on.
Submitted by: John Hein (ages ago, and dropped on the floor by me: sorry)
Some files keep the SUN4V tags as a code reference, for the future,
if any rewamped sun4v support wants to be added again.
Reviewed by: marius
Tested by: sbruno
Approved by: re
WITHOUT_CLANG.
Don't build clang bootstrap/build-tools depending on this flag. We also
keep gperf, devd and libstdc++ around to prevent foot-shooting and to
make this a two-way street.
Make fdt default on arm and powerpc.
This now includes cross compiled targets, where before we tried to
make it host-based.
Also, move the lists of default yes and no options to a variable.
In general, only build tools should get this treatment in bsd.own.mk.
Also, the use of TARGET* in the bsd.*mk files is discouraged, but
necessary here due to the ordering of things in buildworld. We make
the native case work by testing MACHINE_ARCH after TARGET_ARCH.
OLD_FILES/OLD_DIRS/OLD_LIBS lists.
If you specify enough WITHOUT_FOO flags, the argument list passed to the
shell will be too long. Using .for/.endfor make(1) "loop" will make the
parser of the Makefile explode. Hack around this with good old pipes.
No objections: netchild
Reported by: b.f.
infrastructure to use it. make distributeworld can now be used without
preparing its environment first and installs games into its distribution
using the regular make distribute logic instead of post-processing with
a script.
Also add two new targets, packageworld and packagekernel, that tar up the
results of distributeworld and distributekernel (also new), respectively.
setting. It can be built by setting the WITH_ICONV knob. While this
knob is unset, the library part, the binaries, the header file and
the metadata files will not be built or installed so it makes no impact
on the system if left turned off.
This work is based on the iconv implementation in NetBSD but a great
number of improvements and feature additions have been included:
- Some utilities have been added. There is a conversion table generator,
which can compare conversion tables to reference data generated by
GNU libiconv. This helps ensuring conversion compatibility.
- UTF-16 surrogate support and some endianness issues have been fixed.
- The rather chaotic Makefiles to build metadata have been refactored
and cleaned up, now it is easy to read and it is also easier to add
support for new encodings.
- A bunch of new encodings and encoding aliases have been added.
- Support for 1->2, 1->3 and 1->4 mappings, which is needed for
transliterating with flying accents as GNU does, like "u.
- Lots of warnings have been fixed, the major part of the code is
now WARNS=6 clean.
- New section 1 and section 5 manual pages have been added.
- Some GNU-specific calls have been implemented:
iconvlist(), iconvctl(), iconv_canonicalize(), iconv_open_into()
- Support for GNU's //IGNORE suffix has been added.
- The "-" argument for stdin is now recognized in iconv(1) as per POSIX.
- The Big5 conversion module has been fixed.
- The iconv.h header files is supposed to be compatible with the
GNU version, i.e. sources should build with base iconv.h and
GNU libiconv. It also includes a macro magic to deal with the
char ** and const char ** incompatibility.
- GNU compatibility: "" or "char" means the current local
encoding in use
- Various cleanups and style(9) fixes.
Approved by: delphij (mentor)
Obtained from: The NetBSD Project
Sponsored by: Google Summer of Code 2009
A full featured groff is required during buildworld, so build it always
and don't rely on it being present on the host system.
vgrind(1) is tightly coupled to a roff processor and will not be
built/installed when groff is disabled. Also much of the roff'ed
documentation under share/doc will not be built/installed when
WITHOUT_GROFF is defined.
Reviewed by: ru (partial)
seem to work when building xdev anymore (most likely my changes lately
moving the TARGET guessing stuff to Makefile from Makefile.inc1, but I
really don't grok why). Fix make xdev by putting them on the command
line. This will work either way while I try to figure it out.
make sure we define it for the xdev stuff.
Move xdev stuff to be last again in this file.
# xdev-build works now, but xdev-install appears to be broken though.
invocations of Makefile.inc1 (since that's supposed to be an internal
interface for world and related targets). Document this with a .error
message. For a transition period, support passing in just TARGET, but
give a .warning for that case: I plan on removing it in 9.0...
need to do this because variables specified on the command line
override those specified in the Makefile. This is why we also moved
from TARGET to _TARGET in Makefile, and then set TARGET on the command
line when we fork a submake with Makefile.inc1.
This makes mips/mips work again, even without the workaround committed to
lib/libc/Makefile.
Implement MACHINE_ARCH=mips64e[lb] to build N64 images. This replaces
MACHINE_ARCH=mipse[lb] TARGET_ABI=n64.
MACHINE_ARCH=mipsn32e[lb] has been added, but currently requires
WITHOUT_CDDL due to atomic issues in libzfs. I've not investigated
this much, but implemented this to preserve as much of the TARGET_ABI
functionality that I could. Since its presence doesn't affect the
working cases, I've kept it in for now.
Added mips64e[lb] to make universe, so more kernels build.
And I think this (finally) closes the curtain on the tbemd tree.
libcompiler_rt.a is a BSD licensed C language runtime, which implements
many routines which are linked into binaries on architectures where
certain functionality is missing (e.g. 64 bits mul/div on i386).
Unfortunately, libcompiler_rt cannot replace libgcc entirely. Certain
features, such as an unwinder for exception handling, are missing.
That's why only libgcc.a is replaced for now, because this one does seem
to be complete.
Tested by: rene (amd64), nwhitehorn (powerpc), droso (i386 exprun)
and many others. Thanks!
Obtained from: user/ed/compiler-rt
and 3.3 (build the modules). IMHO, this makes it a little easier to
track the progress of a kernel build using whereintheworld et al.
MFC after: 3 weeks
change the name of the object tree from ${TARGET} to
${TARGET}.${TARGET_ARCH} so we can do both big and little endian
builds in the same tree.
Reviewed by: arch@ (twice)
Rather than having arch specific code in Makefile.inc1, generalize so
that we can control the settings of different options on a per
architecutre basis.
Reviewed by: arch@ (twice)
Adjust dependencies for programs using libarchive
Add xz and linkage against liblzma to rescue system
Approved by: kientzle, delphij (mentor)
MFC after: 2 weeks
- Rework the wrapper support to check libpkg version as well as pkg_install
version.
- Add libfetch to _prebuild_libs.
- There are no new features introduced.
Notes: the API is not stable, so basically, do not use libpkg in your
projects for now. Also there's no manpage for libpkg yet, because the API
will change drastically. I repeat, do not use libpkg for now.
the buildkernel. This way makeoptions WITH_CTF=yes not only works when
compiling the tradtitional way, but also when using buildkernel. This
does not enable the CTF part of the world, it still defaults to without
CTF info.
The cross/build-tools/bootstrap targets are not affected by this, they
still have and should keep the explicit NO_CTF.
Notified by: np
libulog now only provides functions that are used by various packages
from the ports tree, namely the libutempter ones. There is no reason to
link it into the crunch/fixit binaries anymore.
That is, write 'exec 3<&0' instead of '3<&0'. Due to an sh(1) bug fixed in
r199953, the latter also persisted, provided that fd 3 was not open before.
With newer sh or fd 3 open, it would not delete orphaned catpages.
MFC after: 2 weeks
Unfortunately there are two slight problems with that:
- Yacc and lex might generate code that generates warnings because of
this. Require yacc and lex to be rebuilt during bootstrap. I'm not
incrementing __FreeBSD_version here, because I assume someone else
will do this eventually.
- When running `make buildkernel', it uses share/mk from the source
treeo to build aicasm. Because aicasm also depends on lex, this would
break. Lower WARNS to 5 for now. We should just increment it to 6
again somewhere in the very far future.
which disables doing a make obj. Use it when you know it will work
only. KERNFAST now implies NO_KERNELOBJ, since you don't need to keep
doing obj when doing incremental kernel builds.
The information used by the "Last login:"-line is obtained by using
ulog_setutxfile(3) to switch to the lastlog database. Login and logout
are performed using the utility functions ulog_login(3) and
ulog_logout(3).
This also means we must build libulog during bootstrap.
Approved by: des
files search path and thus -isystem is sufficient. -iprefix is
meant to do something entirely different.
Approved by: ed (mentor)
OKed by: ru, kan
Tested by: make universe
is installed, we should at least have the tzsetup tool available!
Suggested by: Andriy Gapon <avg@freebsd.org>
Noticed by: Ben Kaduk <minimarmot@gmail.com>
MFC after: 1 week
compiled with stack protector.
Use libssp_nonshared library to pull __stack_chk_fail_local symbol into
each library that needs it instead of pulling it from libc. GCC
generates local calls to this function which result in absolute
relocations put into position-independent code segment, making dynamic
loader do extra work every time given shared library is being relocated
and making affected text pages non-shareable.
Reviewed by: kib
Approved by: re (kib)
Use libssp_nonshared library to pull __stack_chk_fail_local symbol into
each library that needs it instead of pulling it from libc. GCC generates
local calls to this function which result in absolute relocations put into
position-independent code segment, making dynamic loader do extra work everys
time given shared library is being relocated and making affected text pages
non-shareable.
Reviewed by: kib
Approved by: re (kensmith)
to possible breakages in the catalog handling code. Since then, that
code has been replaced by the secure code from NetBSD but NLS in libc
remained turned off. Tests have shown that the feature is stable and
working so we can now turn it on again.
- Add several new catalog files:
- ca_ES.ISO8859-1
- de_DE.ISO8859-1
- el_GR.ISO8859-7 (by manolis@ and keramida@)
- es_ES.ISO8859-1 (kern/123179, by carvay@)
- fi_FI.ISO8859-1
- fr_FR.ISO8859-1 (kern/78756, by thierry@)
- hu_HU.ISO8859-2 (by gabor@)
- it_IT.ISO8859-15
- nl_NL.ISO8859-1 (corrections by rene@)
- no_NO.ISO8859-1
- mn_MN.UTF-8 (by ganbold@)
- sk_SK.ISO8859-2
- sv_SE.ISO8859-1
(The catalogs without explicit source has been obtained from NetBSD.)
Approved by: attilio
installing with -DWITHOUT_INFO, otherwise one can experience a
failure trying to installworld on a system that is built with
-DWITHOUT_INFO (i.e., without /usr/bin/install-info).
Reported by: bland
MFC after: 3 days
you can build the cross development tools and install them as
$XDEV-freebsd-xxx for each tool. This allows one to use autoconf to
find the tools for cross building scenarios.
make KERNFAST=blah buildkernel
is now a short cut for
make KERNCONF=blah -DKERNFAST buildkernel
This change works for all kernel config files not named "1". I did
that to make sure that
make -DKERNFAST buildkernel
remains the same as
make -DKERNFAST KERNCONF=GENERIC buildkernel
rather than trying to build and configure "1". I've never seen a
kernel config file named "1," so I think this is a good compromise.
and clean steps. KERNFAST was selected to complement KERNCONF which
is typically used in these scenarios (especially with cross building).
Reviewed by: arch@
32-bit compat libs on amd64 since -march=k8 may generate instructions
that are not implemented on Intel EM64T processors. Instead, use
a simpler set of default flags that should work on all amd64-capable
CPUs.
PR: amd64/113111
Submitted by: NIIMI Satoshi sa2c of sa2c.net
MFC after: 1 week
Specifically, build a 32-bit /usr/bin/ldd32 on amd64 which handles 32-bit
objects. Since it is a 32-bit binary, it can fork a child process which
can dlopen() a 32-bit shared library. The current 32-bit support in ldd
can't do this because it does the dlopen() from a 64-bit process. In order
to preserve an intuitive interface for users, the ldd binary automatically
execs /usr/bin/ldd32 for 32-bit objects. The end result is that ldd on
amd64 now transparently handles 32-bit shared libraries in addition to
32-bit binaries.
Submitted by: ps (indirectly)
- It is opt-out for now so as to give it maximum testing, but it may be
turned opt-in for stable branches depending on the consensus. You
can turn it off with WITHOUT_SSP.
- WITHOUT_SSP was previously used to disable the build of GNU libssp.
It is harmless to steal the knob as SSP symbols have been provided
by libc for a long time, GNU libssp should not have been much used.
- SSP is disabled in a few corners such as system bootstrap programs
(sys/boot), process bootstrap code (rtld, csu) and SSP symbols themselves.
- It should be safe to use -fstack-protector-all to build world, however
libc will be automatically downgraded to -fstack-protector because it
breaks rtld otherwise.
- This option is unavailable on ia64.
Enable GCC stack protection (aka Propolice) for kernel:
- It is opt-out for now so as to give it maximum testing.
- Do not compile your kernel with -fstack-protector-all, it won't work.
Submitted by: Jeremie Le Hen <jeremie@le-hen.org>
source upgrades by falling back to GNU ar(1) as necessary. Option
WITH_BSDAR is gone. Option _WITH_GNUAR to aid in upgrades is *not*
supposed to be set by the user.
Stop bootstrapping BSD ar(1) on the next __FreeBSD_version bump, as
there are no known bugs in it. Bump __FreeBSD_version to anticipate
this and to flag the switch to BSD ar(1), should it be needed for
something.
Input from: obrien, des, kaiw
and usr.bin/truss/ioctl.c. This is the correct way to address the problem
that arises when doing an incremental build after a header used by kdump
has been removed (cf. i4b disconnect a while ago)
Explained by: ru
MFC after: 2 weeks
through scanning its output as ldd(1) returns a non-zero status only
for really abnormal conditions such as an improper file format.
Now cp(1) won't get bogus "not" and "found" arguments if a lib
is missing. [1]
- Don't guess if an element of a complex pipeline is assigned to the main
shell or a sub-shell. Namely use stdio, not vars, to pass lists out from
loops. If using vars, there's the risk that a loop will run in a sub-shell
and the list won't make it to the main shell. It appears that braces and
parens give only limited control over the issue while stdio always works
as intended. Apply this solution to both $progs and $libs for consistency,
although I've failed to go without it only in the $libs part.
Requested by: emaste [1]
I.e., not only copy them to a scratch dir, but also make them use saved
copies of libraries and locale files. That gives us several benefits:
1) ABI breakages should no longer affect installworld over the live system.
2) It becomes safe to run installworld while still running the old kernel.
However, it can be reasonable to save the old /rescue before that to be
able to run the old reboot(8), as the new binaries are rather likely to
fail with the old kernel. Anyhow, it's now possible to upgrade a system
in a single reboot _reliably_.
3) With a bit of hackery around rtld(8), it becomes possible to do destructive
cross-installs, e.g., i386->amd64 over the live system.
The only shared item left between the old and new systems is rtld(8),
which cannot be run from a saved copy easily because its full
pathname is stored in the respective field of each ELF executable.
(In theory, that field could be overridden, e.g., from the environment,
but this can lead to security issues.) That's why a destructive
cross-install isn't possible w/o hackery yet.
Fruitful ideas by: ru
Reviewed by: ru
Tested with: audit(4)
the threading libraries is built. This simplifies the
logic in makefiles that need to check if the pthreads
support is present. It also fixes a bug where we would
build a threading library that we shouldn't have built:
for example, building with WITHOUT_LIBTHR and the default
value of DEFAULT_THREADING_LIB (libthr) would mistakenly
build the libthr library, but not install it.
Approved by: re (kensmith)
their dependency on libc and its versioned symbols. For that to work,
libc needs to be built before any other shared library that might depend
on it. Add necessary glue to make that happen.
Warning, after symbol versioning is enabled, going back is not easy
(use WITHOUT_SYMVER at your own risk).
Change the default thread library to libthr.
There most likely still needs to be a version bump for at least the
thread libraries. If necessary, this will happen later.
lib32 build somewhat. Specifically, instead of spamming
${CC} et al with -I${LIB32TMP}/usr/include which can be
harmful (as has been demonstrated by the ncursesw WIP),
use slightly different approach to achieve the same goal.
This also simplifies things a bit.
Prodded by: rafan
- Remove libnetgraph from the list of prebuilt libraries as
no other library depends on it (snmp_netgraph.so does not
count as we don't build it in the "libraries" target).
- Restore libssh dependencies when compiling with Kerberos
support.
I found one bug. Pass our idea of TARGET_ARCH and TARGET down to
XMAKE, the cross-tools make. Previously it worked because usually
TARGET_ARCH was specified on the initial make's command line.
This should also allow us to simplify the "universe" target, which
I'm currently testing.
