Commit Graph

163 Commits

Author SHA1 Message Date
Peter Wemm
085beaf862 Add the COMPAT_OLDPCI option for the alpha so GENERIC compiles. 2000-03-19 13:57:09 +00:00
Matt Jacob
583759a807 Alpha 8200: add DEC_KN8AE (TurboLaser) platform option. 2000-03-18 08:01:34 +00:00
Brian Feldman
60bfc3b09b Do some cleanups of the IPv6 stuff. This is a non-functional change.
Approved by:	jkh
2000-02-27 07:35:42 +00:00
Jordan K. Hubbard
2217c725f9 Enable IPv6 options 2000-02-26 22:13:21 +00:00
Jordan K. Hubbard
4a04162824 Clean up POSIX options, syncronize generics. 2000-02-04 07:02:53 +00:00
Peter Wemm
68b538c712 Remove 'conflicts' token - it has been effectively doing absolutely
nothing for quite some time.  The only thing that cared was userconfig,
but it was for one invisible device so we never saw it's effects.
2000-01-29 18:07:07 +00:00
Warner Losh
173c0f9f5c Mitigate the stream.c attacks
o Drop all broadcast and multicast source addresses in tcp_input.
o Enable ICMP_BANDLIM in GENERIC.
o Change default to 200/s from 100/s.  This will still stop the attack, but
  is conservative enough to do this close to code freeze.

This is not the optimal patch for the problem, but is likely the least
intrusive patch that can be made for this.

Obtained from: Don Lewis and Matt Dillon.
Reviewed by: freebsd-security
2000-01-28 06:13:09 +00:00
Peter Wemm
6bd284603b Remove a no-op "port ?" declaration. 2000-01-24 08:51:16 +00:00
Peter Wemm
3936eee2ff Update GENERIC/SIMOS to leave out the useless trailing digit in pci
and other unwired devices.
2000-01-23 12:22:25 +00:00
Wilko Bulte
29429dde38 updated comments 2000-01-21 20:19:18 +00:00
Wilko Bulte
c0927dd219 Removed outdated comment on experimental nature of ata. Added comment to esp 2000-01-16 18:46:21 +00:00
Wilko Bulte
d8f1ce3873 Correct comments / point to right LINT file (./LINT does not exist for Alpha) 2000-01-16 12:39:24 +00:00
Bill Paul
0177987224 Add device driver support for USB ethernet adapters based on the CATC
USB-EL1202A chipset. Between this and the other two drivers, we should
have support for pretty much every USB ethernet adapter on the market.
The only other USB chip that I know of is the SMC USB97C196, and right
now I don't know of any adapters that use it (including the ones made
by SMC :/ ).

Note that the CATC chip supports a nifty feature: read and write combining.
This allows multiple ethernet packets to be transfered in a single USB
bulk in/out transaction. However I'm again having trouble with large
bulk in transfers like I did with the ADMtek chip, which leads me to
believe that our USB stack needs some work before we can really make
use of this feature. When/if things improve, I intend to revisit the
aue and cue drivers. For now, I've lost enough sanity points.
2000-01-14 03:14:49 +00:00
David E. O'Brien
c201f69bed Sort. 2000-01-12 02:30:42 +00:00
Peter Wemm
d2b1bc7312 Put on my asbestos suit and move $mach/conf/*.$mach to conf/*.$mach as
hinted at in the previous config(8) commits.  I've spoken about this with
a few people and after the initial suprise wore off they thought it wasn't
a bad idea.  The upshot of it is that all the files*, Makefile*, options*
files are all right next to each other in the hope that people making
changes to one set will remember the others.

Note, config(8) looks to sys/conf first, and falls back to sys/$mach/conf
still, so this doesn't stop people working in subdirs for new platforms.
But once it's in the tree it can be moved next to the other files so that
the non-i386 platforms are (hopefully) treated a little better than as if
they were "second class" ports.

This does not change any user editable files.  the config program is
still run in the same directory as before, the per-platform files
(GENERIC, LINT etc) are still in the same place.
2000-01-09 15:29:10 +00:00
KATO Takenori
832f9b3eb4 Synced with sys/i386/conf/Makefile.i386 (MACHINE -> MACHINE_ARCH).
Pointed out by:	peter
2000-01-09 14:56:07 +00:00
Peter Wemm
58fa7951a2 Bump configversion. The controller/device changes are upwards but not
downwards compatable.  If you try and config a s/controller/device/ kernel
with an old config(8), the results will be less than satisfactory.
2000-01-09 07:10:27 +00:00
Peter Wemm
f31f62f872 Further sync Alpha and i386 Makefiles. Remove KERNFORMAT = elf stuff as
it's always true on these platforms (and is likely to be on others as
well since loader is the one that is configured for whatever the boot
requirements are)
2000-01-08 17:31:35 +00:00
Marcel Moolenaar
6257c6285a Sync with i386
\begin{quote}
Compile genassym.c with ordinary ${CFLAGS}.  The (small) needs for
${GEN_CFLAGS} and -U_KERNEL became negative when all all the
genassym.c's were converted to be cross-built.

Makefile.*:
- Cleanups associated with the old genassym.
- Fixed deprecated spelling of ${.IMPSRC} as "$<".
\end{quote}

Submitted by: bde
2000-01-08 16:43:46 +00:00
Peter Wemm
70c43495f8 s/controller/device/ as per config(8) 2000-01-08 16:03:57 +00:00
Marcel Moolenaar
9c0182bbdc Use genassym(1). 2000-01-07 14:58:47 +00:00
Peter Wemm
31f723c7bc Bring the Alpha and x86 Makefiles closer together. 2000-01-07 05:12:12 +00:00
Peter Wemm
d5127a856d Missed s/KERNEL/_KERNEL/ here.. *blush*.
Submitted by:	bde
2000-01-06 13:14:51 +00:00
Bill Paul
dfd1e98eac Add device driver support for USB ethernet adapters based on the
Kawasaki LSI KL5KUSB101B chip, including the LinkSys USB10T, the
Entrega NET-USB-E45, the Peracom USB Ethernet Adapter, the 3Com
3c19250 and the ADS Technologies USB-10BT. This device is 10mbs
half-duplex only, so there's miibus or ifmedia support. This device
also requires firmware to be loaded into it, however KLSI allows
redistribution of the firmware images (I specifically asked about
this; they said it was ok).

Special thanks to Annelise Anderson for getting me in touch with
KLSI (eventually) and thanks to KLSI for providing the necessary
programming info.

Highlights:
- Add driver files to /sys/dev/usb
- update usbdevs and regenerate attendate files
- update usb_quirks.c
- Update HARDWARE.TXT and RELNOTES.TXT for i386 and alpha
- Update LINT, GENERIC and others for i386, alpha and pc98
- Add man page
- Add module
- Update sysinstall and userconfig.c
2000-01-05 04:27:24 +00:00
Matt Jacob
b6ca8f5a13 add wx0 driver 2000-01-04 11:17:35 +00:00
Bill Paul
ed63a7aaef This commit adds device driver support for the ADMtek AN986 Pegasus
USB ethernet chip. Adapters that use this chip include the LinkSys
USB100TX. There are a few others, but I'm not certain of their
availability in the U.S. I used an ADMtek eval board for development.
Note that while the ADMtek chip is a 100Mbps device, you can't really
get 100Mbps speeds over USB. Regardless, this driver uses miibus to
allow speed and duplex mode selection as well as autonegotiation.
Building and kldloading the driver as a module is also supported.

Note that in order to make this driver work, I had to make what some
may consider an ugly hack to sys/dev/usb/usbdi.c. The usbd_transfer()
function will use tsleep() for synchronous transfers that don't complete
right away. This is a problem since there are times when we need to
do sync transfers from an interrupt context (i.e. when reading registers
from the MAC via the control endpoint), where tsleep() us a no-no.
My hack allows the driver to have the code poll for transfer completion
subject to the xfer->timeout timeout rather that calling tsleep().
This hack is controlled by a quirk entry and is only enabled for the
ADMtek device.

Now, I'm sure there are a few of you out there ready to jump on me
and suggest some other approach that doesn't involve a busy wait. The
only solution that might work is to handle the interrupts in a kernel
thread, where you may have something resembling a process context that
makes it okay to tsleep(). This is lovely, except we don't have any
mechanism like that now, and I'm not about to implement such a thing
myself since it's beyond the scope of driver development. (Translation:
I'll be damned if I know how to do it.) If FreeBSD ever aquires such
a mechanism, I'll be glad to revisit the driver to take advantage of
it. In the meantime, I settled for what I perceived to be the solution
that involved the least amount of code changes. In general, the hit
is pretty light.

Also note that my only USB test box has a UHCI controller: I haven't
I don't have a machine with an OHCI controller available.

Highlights:

- Updated usb_quirks.* to add UQ_NO_TSLEEP quirk for ADMtek part.
- Updated usbdevs and regenerated generated files
- Updated HARDWARE.TXT and RELNOTES.TXT files
- Updated sysinstall/device.c and userconfig.c
- Updated kernel configs -- device aue0 is commented out by default
- Updated /sys/conf/files
- Added new kld module directory
1999-12-28 02:01:18 +00:00
Bruce Evans
f11c215715 Synced with Makefile.i386. The following cleanups in Makefile.i386
rev.1.168 should have been committed concurrently:

Fixed some style bugs (always use precisely 1 space after `:' in
dependency specifications).
Removed bogus dependency of ${FULLKERNEL} on ${BEFORE_DEPEND}.

Reminded by:	peter
1999-12-27 12:06:11 +00:00
Peter Wemm
07ed92fb01 Zap the kvm_kernel.db juggling at 'make install' time, it isn't needed
any more.
1999-12-27 07:19:45 +00:00
David E. O'Brien
19b132d78b Turn on the sym' driver by default. It lives well beside the ncr' driver
now.  On one machine with <825a> and <875> controllers, `sym' correctly
attached.  On another one with only a <ncr 53c810 fast10 scsi>, the `ncr'
driver correctly attached.
1999-12-22 05:52:04 +00:00
Peter Wemm
5a81d0a50b Only compile gusc for isa (the #if NISA inside gusc effectively covers
the whole file)
1999-12-21 13:53:49 +00:00
Steve Price
0138b1134c MFS_ROOT is deprecated so use MD_ROOT instead. Also add the md
pseudo-device to make it easier to build releases.
1999-12-20 05:11:51 +00:00
Peter Wemm
574b36f9b7 Be more consistant in using perl vs. perl5. We were using perl5 in the
kernel builds so as not to confuse with perl4 when bootstrapping from old
systems.  I don't know if this is still applicable but it shouldn't hurt
to be consistant at least.

Also copy vnode_if.sh to vnode_if.pl.  Doing a 'sh vnode_if.sh' when it
was a perl script was kinda silly.
1999-12-17 22:07:43 +00:00
Kazutaka YOKOTA
273157da59 - Add the device resume method. It supercedes the existing resume
routine which hooks the apm driver.
- Rename the PSM_HOOKAPM option to PSM_HOOKRESUME.
- Delete unnecessary #include.
1999-12-15 10:04:05 +00:00
Kazutaka YOKOTA
83c5d22d61 - Pull in kbd.c when sc or vt is included in the kernel, even if
no keyboard driver is defined in the kernel config file.
1999-12-13 13:01:00 +00:00
Peter Wemm
00943c9151 Argh, fix a stupid typo. :-( 1999-12-12 21:36:19 +00:00
Peter Wemm
6f77b2defc Use a seperate -c and -h mode. The vnode_if.c file is compiled only into
the kernel while the vnode_if.h header is a bunch of inlines to call the
code that is in the kernel. Generating the .h file on the fly is kinda
bogus because it has to match the one compiled into the kernel.

IMHO we should have kern/vnode_if.c and sys/vnode_if.h committed in the
tree but that's another battle.
1999-12-12 16:43:05 +00:00
Archie Cobbs
f2cbe161be Move source files common to all platforms from <arch>/conf/files.<arch>
to conf/files.  If/when these files are optimized for each platform,
they can be moved back.
1999-12-09 19:38:20 +00:00
Dan Moschuk
9578442e8d Move libkern/arc4random.c into conf/files. I was planning on doing an
optimized alpha version, but I'll leave that alone for the time being.
1999-12-09 18:47:54 +00:00
Bill Paul
96f2e892a7 Add the if_dc driver and remove all of the al, ax, dm, pn and mx drivers
which it replaces. The new driver supports all of the chips supported
by the ones it replaces, as well as many DEC/Intel 21143 10/100 cards.

This also completes my quest to convert things to miibus and add
Alpha support.
1999-12-04 17:41:31 +00:00
Andrew Gallatin
dbc58a480c A port of NetBSD's AlphaServer 1000 and 1000A support. Thanks to Cristian
Angelini for allowing me to use his AS1000 to do the port.

Note that this is untested on AlphaServer 1000A hardware.

Reviewed by:	dfr
Tested by:   	Cristian Angelini <chr.ang@biella.alpcom.it>
Obtained From: 	NetBSD
1999-12-01 15:25:04 +00:00
Dima Ruban
97cab30be6 Add arc4random.c.
Please note that kernel is still broken on alpha.
1999-11-30 20:18:20 +00:00
David E. O'Brien
521c57eb69 Sort PCI SCSI controlers. 1999-11-28 00:59:03 +00:00
David E. O'Brien
658743b5e2 /sys adjustments to add the `sym' controler driver.
This is commented out in GENERIC as you cannot mix `sym' with `ncr' right now.
Note that LINT is no more broken by this commit.
1999-11-28 00:48:15 +00:00
Peter Wemm
3ac8285030 Add pcm entries for the alpha too, since they were taken out of
conf/files and moved to i386/conf/files.i386

Forgotten by: tanimura
1999-11-22 16:10:26 +00:00
Peter Wemm
9565e721cb Update the Alpha makefile to be more in line with the x86 version. It
was getting quite dated.  Attempt to minimize diffs between the two so
it's not as painful to do this next time.
1999-11-22 15:39:13 +00:00
Nick Hibma
7c74d2682c Typo 1999-11-16 22:02:16 +00:00
Doug Rabson
7cbc47c7bc Add the ata devices to the GENERIC kernel. Hopefully, this should allow
it to install from ATA cds and to ATA disks. I'll check after my next
release builds.
1999-11-15 09:09:00 +00:00
Kazutaka YOKOTA
d7ccb880d1 - Added the following options; they have existed in syscons
for sometime, but haven't been registered here.

  SC_NORM_ATTR
  SC_NORM_REV_ATTR
  SC_KERNEL_CONS_ATTR
  SC_KERNEL_CONS_REV_ATTR

PR: kern/13176
1999-11-08 10:59:48 +00:00
Kazutaka YOKOTA
51ebcb230e - Added a new kernel configuration option: SC_TWOBUTTON_MOUSE.
The new option will make the right mouse button the `paste' button.
  Useful for two button mice.

Submitted by: morganw@engr.sc.edu (Wes Morgan)
1999-11-08 10:04:29 +00:00
Kazutaka YOKOTA
73027df75c - Removed SC_VIDEO_DEBUG. It is broken and useless now. 1999-11-08 09:57:16 +00:00