Use the existing legacy PCI driver as the basis for shared code
between the legacy and modern PCI drivers. The existing virtio_pci
kernel module will contain both the legacy and modern drivers.
Changes to the virtqueue and each device driver (network, block, etc)
for V1 support come in later commits.
Update the MMIO driver to reflect the VirtIO bus method changes, but
the modern compliance can be improved on later.
Note that the modern PCI driver requires bus_map_resource() to be
implemented, which is not the case on all archs.
The hw.virtio.pci.transitional tunable default value is zero so
transitional devices will continue to be driven via the legacy
driver.
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27856
Stop running ctfconvert over generated C files in the kernel by marking
them with no-ctfconvert.
This fixes warnings from ctfconvert trying to parse C files:
ctfconvert: file.c: Couldn't read ehdr: Invalid argument
Reviewed by: emaste, mmel
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D28156
A driver can register a shrinker that will be called when the kernel
wants to free some memory.
Add support for that in linuxkpi and call the registered shrinkers
when the lowmem event is triggered.
Reviewed by: bz
Differential Revision: https://reviews.freebsd.org/D27728
Remove wi(4). pccard is going away, and wi only supports PC Card
devices, though it has a minor amount of glue to also support
PCI cards. However, removing the one without removing the other
is hard, so the whole driver is being removed.
Relnotes: Yes
pccard is being removed, so remove bt3c driver since it only has PC
Card attachment. Also remove bt3cfw(8) since it's the firmware for this
driver.
Relnotes: Yes
This change includes:
hpen - Generic / MS Windows compatible HID pen tablet driver.
hgame - Generic game controller and joystick driver.
xb360gp - Xbox360-compatible game controller driver.
Submitted by: Greg V <greg_unrelenting.technology>
Reviewed by: hselasky (as part of D27993)
hidmap is a kernel module that maps HID input usages to evdev events.
Following dependent drivers is included in the commit:
hms - HID mouse driver.
hcons - Consumer page AKA Multimedia keys driver.
hsctrl - System Controls page (Power/Sleep keys) driver.
ps4dshock - Sony DualShock 4 gamepad driver.
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D27993
This driver provides raw access to HID devices through uhid(4)-compatible
interface and is based on pre-8.x uhid(4) code. Unlike uhid(4) it does
not take devices in to monopoly ownership and allows parallel access
from other drivers.
hidraw supports Linux's hidraw-compatible interface as well.
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D27992
This change implements hid_if.m methods for HID-over-USB protocol [1].
Also, this change adds USBHID_ENABLED kernel option which changes
device_probe() priority and adds/removes PnP records to prefer usbhid
over ums, ukbd, wmt and other USB HID device drivers and vice-versa.
The module is based on uhid(4) driver. It is disabled by default for
now due to conflicts with existing USB HID drivers.
[1] https://www.usb.org/sites/default/files/hid1_11.pdf
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D27893
hidquirk(4) is derived from usb_quirk(4) and inherits all its HID-related
functionality. It does not support ioctl(2) interface yet.
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D27890
This driver provides support for multiple HID driver attachments
to single HID transport backend. This ability existed in Net/OpenBSD
(uhidev and ihidev drivers) but has never been ported to FreeBSD.
Unlike Net/OpenBSD we do not use report number alone to distinct report
source but we follow MS way and use a top level collection (TLC) usage
index that report belongs to as a location key.
The driver performs child device autodiscovery based on HID report
descriptor data, proxying of HID requests from child devices to parent
transport backends and broadcasting of interrupts in backward direction.
Differential revision: https://reviews.freebsd.org/D27888
Create an abstract HID interface that provides hardware independent
access to HID capabilities and functions through the device tree.
hid_if.m resembles existing USBHID KPI and consist of next methods:
HID method USBHID variant
-----------------------------------------------------------------------
hid_intr_setup usbd_transfer_setup (INTERRUPT IN xfer)
hid_intr_unsetup usbd_transfer_unsetup (INTERRUPT IN xfer)
hid_intr_start usbd_transfer_start (INTERRUPT IN xfer)
hid_intr_stop usbd_transfer_drain (INTERRUPT IN xfer)
hid_intr_poll usbd_transfer_poll (INTERRUPT IN xfer)
hid_get_rdesc usbd_req_get_report_descriptor
hid_read No direct analog. Not intended for common use.
hid_write uhid(4) write()
hid_get_report usbd_req_get_report
hid_set_report usbd_req_set_report
hid_set_idle usbd_req_set_idle
hid_set_protocol usbd_req_set_protocol
This change is part of D27888
It will be used by the upcoming HID-over-i2C implementation. Should be
no-op, except hid.ko module dependency is to be added to affected drivers.
Reviewed by: hselasky, manu
Differential revision: https://reviews.freebsd.org/D27867
eventfd is a Linux system call that produces special file descriptors
for event notification. When porting Linux software, it is currently
usually emulated by epoll-shim on top of kqueues. Unfortunately, kqueues
are not passable between processes. And, as noted by the author of
epoll-shim, even if they were, the library state would also have to be
passed somehow. This came up when debugging strange HW video decode
failures in Firefox. A native implementation would avoid these problems
and help with porting Linux software.
Since we now already have an eventfd implementation in the kernel (for
the Linuxulator), it's pretty easy to expose it natively, which is what
this patch does.
Submitted by: greg@unrelenting.technology
Reviewed by: markj (previous version)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D26668
These drivers should have been removed along with tl(4) as part of
7c897ca91f and r347918 respectively
as these fromer made sure to only ever attach to the latter, e. g.:
<...>
static int
tlphy_probe(device_t dev)
{
if (!mii_dev_mac_match(dev, "tl"))
return (ENXIO);
<...>
This change introduces framework that allows to dynamically
attach or detach longest prefix match (lpm) lookup algorithms
to speed up datapath route tables lookups.
Framework takes care of handling initial synchronisation,
route subscription, nhop/nhop groups reference and indexing,
dataplane attachments and fib instance algorithm setup/teardown.
Framework features automatic algorithm selection, allowing for
picking the best matching algorithm on-the-fly based on the
amount of routes in the routing table.
Currently framework code is guarded under FIB_ALGO config option.
An idea is to enable it by default in the next couple of weeks.
The following algorithms are provided by default:
IPv4:
* bsearch4 (lockless binary search in a special IP array), tailored for
small-fib (<16 routes)
* radix4_lockless (lockless immutable radix, re-created on every rtable change),
tailored for small-fib (<1000 routes)
* radix4 (base system radix backend)
* dpdk_lpm4 (DPDK DIR24-8-based lookups), lockless datastrucure, optimized
for large-fib (D27412)
IPv6:
* radix6_lockless (lockless immutable radix, re-created on every rtable change),
tailed for small-fib (<1000 routes)
* radix6 (base system radix backend)
* dpdk_lpm6 (DPDK DIR24-8-based lookups), lockless datastrucure, optimized
for large-fib (D27412)
Performance changes:
Micro benchmarks (I7-7660U, single-core lookups, 2048k dst, code in D27604):
IPv4:
8 routes:
radix4: ~20mpps
radix4_lockless: ~24.8mpps
bsearch4: ~69mpps
dpdk_lpm4: ~67 mpps
700k routes:
radix4_lockless: 3.3mpps
dpdk_lpm4: 46mpps
IPv6:
8 routes:
radix6_lockless: ~20mpps
dpdk_lpm6: ~70mpps
100k routes:
radix6_lockless: 13.9mpps
dpdk_lpm6: 57mpps
Forwarding benchmarks:
+ 10-15% IPv4 forwarding performance (small-fib, bsearch4)
+ 25% IPv4 forwarding performance (full-view, dpdk_lpm4)
+ 20% IPv6 forwarding performance (full-view, dpdk_lpm6)
Control:
Framwork adds the following runtime sysctls:
List algos
* net.route.algo.inet.algo_list: bsearch4, radix4_lockless, radix4
* net.route.algo.inet6.algo_list: radix6_lockless, radix6, dpdk_lpm6
Debug level (7=LOG_DEBUG, per-route)
net.route.algo.debug_level: 5
Algo selection (currently only for fib 0):
net.route.algo.inet.algo: bsearch4
net.route.algo.inet6.algo: radix6_lockless
Support for manually changing algos in non-default fib will be added
soon. Some sysctl names will be changed in the near future.
Differential Revision: https://reviews.freebsd.org/D27401
The hme (Happy Meal Ethernet) driver was the onboard NIC in most
supported sparc64 platforms. A few PCI NICs do exist, but we have seen
no evidence of use on non-sparc systems.
Reviewed by: imp, emaste, bcr
Sponsored by: DARPA
Macfilter to route packets through different hooks based on sender MAC address.
Based on ng_macfilter written by Pekka Nikander
Sponsered by Retina b.v.
Reviewed by: afedorov
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D27268
Make room for adding arm64 support to this driver by moving the
x86-specific feature parsing to a separate file.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27388
Implement vt_vbefb to support Vesa Bios Extensions (VBE) framebuffer with VT.
vt_vbefb is built based on vt_efifb and is assuming similar data for
initialization, use MODINFOMD_VBE_FB to identify the structure vbe_fb
in kernel metadata.
struct vbe_fb, is populated by boot loader, and is passed to kernel via
metadata payload.
Differential Revision: https://reviews.freebsd.org/D27373
This driver provides support for Realtek PCI SD card readers. It attaches
mmc(4) bus on card insertion and detaches it on card removal. It has been
tested with RTS5209, RTS5227, RTS5229, RTS522A, RTS525A and RTL8411B. It
should also work with RTS5249, RTL8402 and RTL8411.
PR: 204521
Submitted by: Henri Hennebert (hlh at restart dot be)
Reviewed by: imp, jkim
Differential Revision: https://reviews.freebsd.org/D26435
It includes:
ACPI_HANDLE() implementation.
AC and VIDEO ACPI events notification support.
Replacement of hand-rolled GPLed _DSM method evaluation helpers
with in-base ones.
Submitted by: wulf
Differential Revision: https://reviews.freebsd.org/D26603
This fixes a potential crash in firmware 1.25.0.0 on the passive open
side during TOE operation.
Obtained from: Chelsio Communications
MFC after: 1 week
Sponsored by: Chelsio Communications
This would be more accurately expressed as COMPAT_LINUXKPI implying or
requiring backlight, but config(8) doesn't really have a way to express
that. This fixes the build with COMPAT_LINUXKPI specified in one's kernel
config.
connections over multiple paths.
Multipath routing relies on mbuf flowid data for both transit
and outbound traffic. Current code fills mbuf flowid from inp_flowid
for connection-oriented sockets. However, inp_flowid is currently
not calculated for outbound connections.
This change creates simple hashing functions and starts calculating hashes
for TCP,UDP/UDP-Lite and raw IP if multipath routes are present in the
system.
Reviewed by: glebius (previous version),ae
Differential Revision: https://reviews.freebsd.org/D26523
VMware now has arm64 support; move these to MI files in advance of
building them on arm64.
PR: 250308
Reported by: Vincent Milum Jr
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Fortuna remains the default; no functional change to GENERIC.
Big picture:
- Scalable entropy generation with per-CPU, buffered local generators.
- "Push" system for reseeding child generators when root PRNG is
reseeded. (Design can be extended to arc4random(9) and userspace
generators.)
- Similar entropy pooling system to Fortuna, but starts with a single
pool to quickly bootstrap as much entropy as possible early on.
- Reseeding from pooled entropy based on time schedule. The time
interval starts small and grows exponentially until reaching a cap.
Again, the goal is to have the RNG state depend on as much entropy as
possible quickly, but still periodically incorporate new entropy for
the same reasons as Fortuna.
Notable design choices in this implementation that differ from those
specified in the whitepaper:
- Blake2B instead of SHA-2 512 for entropy pooling
- Chacha20 instead of AES-CTR DRBG
- Initial seeding. We support more platforms and not all of them use
loader(8). So we have to grab the initial entropy sources in kernel
mode instead, as much as possible. Fortuna didn't have any mechanism
for this aside from the special case of loader-provided previous-boot
entropy, so most of these sources remain TODO after this commit.
Reviewed by: markm
Approved by: csprng (markm)
Differential Revision: https://reviews.freebsd.org/D22837