Summary:
All callers of infiniband_bpf_mtap() call it through the wrapper macro,
which checks the if_bpf member explicitly. Since this is getting
hidden, move this check into the internal function and remove the
wrapper macro.
Reviewed by: hselasky
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D39024
Fixes: bf2e2524a2 ("ssh: canonicize the host name before...")
Fixes: 3e74849a1e ("ssh: canonicize the host name before...")
Reviewed by: rew
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D38441
It was used by ancient GCC assert.h. Prior to 2001 GCC used to provide
its own assert.h The GCC assert.h required __eprintf to emit the error
message. FreeBSD's own assert.h never used this.
Reviewed by: ed (previously), imp
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D2597
We have FIDO/U2F support in the base system now, so reserve a group ID
for it (maching the security/u2f-devd port).
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34341
In the IP header, Flags + Fragment Offset is a 16-bit field.
Use ntohs() instead of ntohl(), otherwise the Flags/Fragment Offset
values may not display correctly.
Before (DF set)
Vr HL TOS Len ID Flg off TTL Pro cks Src Dst
4 5 00 0054 0001 0 0000 40 01 b6a4 192.0.2.1 192.0.2.2
After (DF set)
Vr HL TOS Len ID Flg off TTL Pro cks Src Dst
4 5 00 0054 0001 2 0000 40 01 b6a4 192.0.2.1 192.0.2.2
Reviewed by: markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D38479
Functions implemented :
- mac_veriexec_vnode_check_unlink: Unlink on a file has been
requested and requires validation. This function prohibits the
deleting a protected file (or deleting one of these hard links, if
any).
- mac_veriexec_vnode_check_rename_from: Rename the file has been
requested and must be validated. This function controls the renaming
of protected file
- mac_veriexec_vnode_check_rename_to: File overwrite rename has been
requested and must be validated. This function prevent overwriting of
a file protected (overwriting by mv command).
The 3 fonctions together aim to control the 'removal' (via unlink) and
the 'mv' on files protected by veriexec. The intention is to reach the
functional level of NetBSD veriexec.
Add sysctl node security.mac.veriexec.unlink to toggle control on
syscall unlink.
Add tunable kernel variable security.mac.veriexec.block_unlink to toggle
unlink protection. Add the corresponding read-only sysctl.
[ tidied up commit message, trailing whitespace, long lines, { placement ]
Reviewed by: sjg, imp
Pull Request: https://github.com/freebsd/freebsd-src/pull/613
When booting from a snapshot we need to follow a different code path
to turn the objset ID into the name, and for forward lookups we need
to walk the parent's snapnames_zap.
With this, it is possible to set the pools BOOTFS property to a
snapshot and boot with a read-only filesystem of that snapshot.
Reviewed by: tsoome, rew, imp
Sponsored By: Beckhoff Automation GmbH & Co. KG
Sponsored By: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D38600
It is better to mention the externel command for showing
the routing table as using an explicit command.
PR: 231579
Suggested by: karels
Reviewed by: karles, gbe
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D39075
We always have it, some languages assume it's present, e.g. go
before 1.20. Enable it by default on arm and arm64.
PR: 269070
Reviewed by: kevans
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D39059
The xenpf_dom0_console_t structure can grow as more data is added, and
hence we need to check that the fields we accesses have been filled by
Xen. The only extra field FreeBSD currently uses is the top 32 bits
for the frame buffer physical address.
Note that this field is present in all the versions that make the
information available from the platform hypercall interface, so the
check here is mostly cosmetic, and to remember us that newly added
fields require checking the size of the returned data.
Fixes: 6f80738b22 ('xen: fetch dom0 video console information from Xen')
Sponsored by: Citrix Systems R&D
Add mostly glibc and msl compatible secure_getenv. Return NULL if
issetugid() indicates the process is tainted, otherwise getenv(x). The
rational behind this is the fact that many Linux applications use this
function instead of getenv() as it's widely consider a, "best
practice".
Reviewed by: imp, mjg (feedback)
Pull Request: https://github.com/freebsd/freebsd-src/pull/686
Signed-off-by: Lucy Marsh <seafork@disroot.org>
Hyper-V does not provide Mellanox hardware, some of Azure's instances
do, thus the configuration to enable them does not belong in the generic
std.hyperv config.
Fixes: 15e7fa83ef ("arm64: Hyper-V: Add vPCI and Mellanox driver modules into build")
If there's a kboot.conf, prase it after the command line args are
parsed. It's not always easy to get all the right command line args
depending on the environment. Allow an escape hatch. While we can't do
everything one might like in this file, we can do enough.
Sponsored by: Netflix
If bread returns an error there is no bp to brelse. One of these
changes was taken from NetBSD commit 0a62dad69f62 ("This works well
enough to populate..."), the rest were found by looking for the same
pattern.
Reviewed by: imp
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D39069
Offsets for all of thse can be a bit complicated as not all interrupts
will be present, only phys and virt are actually required, and sec-phys
could optionally be specified before phys. Push idx/name pairs into
a new config struct and maintain the old indices while still getting the
correct timers.
Split fdt/acpi attach out independently and allocate interrupts before
we head into the common attach(). The secure physical timer is also
optional there, so mark it so to avoid erroring out if we run into
problems.
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D38911
Add missing brelse(bp). Without it the cache grows and we have a n^2
lookup. I'm not entirely sure why we read the block before we write it
back out, since the only side effect of that is to allocate memory,
clear the memory, read it in from disk, throw it away with the contents
of the file being written out. We likely should just do a getblk() here
instead, but even with all that, this takes the time it takes to create
a 150MB msdos fs image down from 5 minutes to 30 seconds.
Old: 317.663u 0.685s 5:18.34 100.0% 198+360k 0+19io 1009pf+0w
New: 7.330u 23.841s 0:31.17 100.0% 198+360k 0+250522io 4pf+0w
See code review for how we got this. tl;dr: netbsd move brelse
into bwrite and we picked up msdos code after that, but not the
move. That change should be picked up later.
Sponsored by: Netflix
Reviewed by: emaste
MFC After: 1 day (13.2 is coming fast)
Differential Revision: https://reviews.freebsd.org/D39025
RFC 4443 specifies cases where certain packets, like those originating from
local-scope addresses destined outside of the scope shouldn't be forwarded.
The current practice is to drop them, send ICMPv6 message where appropriate,
and log the message:
cannot forward src fe80:10::426:82ff:fe36:1d8, dst 2001:db8:db8::10, nxt
58, rcvif vlan5, outif vlan2
At times the volume of such messages cat get very high. Let's allow local
admins to disable such messages on per vnet basis, keeping the current
default (log).
Reported by: zarychtam@plan-b.pwste.edu.pl
Reviewed by: zlei (previous version), pauamma (docs)
Differential Revision: https://reviews.freebsd.org/D38644
In commit 0a5b942d4 the FreeBSD SECTION_STATIC macro was set to
".rodata". This assembler directive is supported by LLVM (as a
convenience alias for ".section .rodata") by not by GNU as.
This caused the FreeBSD builds that are done with gcc to fail.
Therefore, use ".section .rodata" instead, similar to the other
asm_linkage.h headers.
[mjg: cherry-picked from upstream zfs bf1bec394e
to unbreak gcc12 build]
Reviewed-by: Mateusz Guzik <mjguzik@gmail.com>
Reviewed-by: Attila Fülöp <attila@fueloep.org>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Signed-off-by: Dimitry Andric <dimitry@andric.com>
Closes#14526
Fix d20d655018 where getlocalbase()
wasn't used to fill out the printf(3) format of _PATH_INCLUDE_LOCAL.
Differential Revision: https://reviews.freebsd.org/D38975
Reviewed by: imp
The referenced symbols that provide init array boundaries are weak,
hidden, and undefined. The code that iterates over that arrays is not
used for the case when libc is compiled as dso.
This should fix linking with ld.bfd.
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
Now that commit cbbb22031f is in main,
it is possible to run nfsd(8), nfsuserd(8), mountd(8),
gssd(8) and rpc.tlsservd(8) in an appropriately configured vnet
prison if the "allow.nfsd" option is specified in jail.conf.
This patch fixes the rc scripts for this.
Mostly just replaces the "nojail" KEYWORD with "nojailvnet",
but also avoids setting vfs.nfsd.srvmaxio in a prison, since it
must be set outside of the prisons and applies to all
nfsd(8) instances.
Reviewed by: jamie
MFC after: 3 months
Differential Revision: https://reviews.freebsd.org/D38809
The fact that most of the daemon's state is stored on the stack
of the main() makes it hard to split the logic smaller chunks.
Which in turn leads to huge main func that does a a lot of things.
struct log_params existed because some variables need to be passed
into other functions together.
This change renames struct log_params into daemon_state
and moves the rest of the variables into it. This is a necessary
preparation step for further refactroing.
Reviewed by: imp
Pull Request: https://github.com/freebsd/freebsd-src/pull/687
DTrace pid provider writes to user space to set breakpoints. Failing to
sync the icache can lead to SIGTRAP. Radix pmap is the only one missing
a pmap_sync_icache() method, so the pid provider would only potentially
crash a process on a POWER9 or later system.
The current name was a historical curiosity that started when init array
support was added, and then the file appeared a convenient place for the
addition of the MI common code to csu. It is now referenced by name in
single place and the rename is easy, so do it.
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
Do not call CPUID on each ireloc, instead call it once and cache
results, similar to how it is done on powerpc64.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
Differential revision: https://reviews.freebsd.org/D37220
Why? Most trivial point, it shaves around 600 bytes from the dynamic
binaries on amd64. Less trivial, the removed code is no longer part of
the ABI, and we can ship updates to it with libc updates. Right now most
of the csu is linked into the binaries and require us to do somewhat
tricky ABI compat when it needs to change. For instance, the init_array
change would be much simpler and does not require note tagging if we
have init calling code in libc.
This could be improved more, by splitting dynamic and static
initialization. For instance, &_DYNAMIC tests can be removed then.
Such change, nonetheless, would require building libc three times.
I left this for later, after this change stabilizes, if ever.
Reviewed by: markj
Discussed with: jrtc27 (some objections, see the review), imp
Tested by: markj (aarch64)
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
Differential revision: https://reviews.freebsd.org/D37220
In my tests during buildkernel fs->m was always NULL at that stage.
Note the change has no impact on vm obj contention during said workload.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D39027