sysctl() provides a count of number of bytes in the buffer. That is the
actual buffer length. Whereas looking for an interrupt entry with an
empty name could terminate too early, or overflow the end of the buffer.
The overflow will occur if the table of interrupt names is full.
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D36628
These appear to simply be the style of arguments are left untouched and
only local variables are modified. While some may prefer that style
this simply serves to complicate things as they're perfectly writeable.
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D36628
As `ncpus` was otherwise unused, keeping track was pointless. Gets rid
of a warning from an unused variable.
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D36628
vmstat dates back to 3BSD, but wasn't in 32V nor the 7th edition. It
does not seem to have been in AT&T's commercial offerings at all.
Sponsored by: Netflix
On arm64 we currently use a non-posted write for device memory, however
we should move to use posted writes. This is expected to work on most
hardware, however we will need to support a non-posted option for some
broken hardware.
Reviewed by: imp, manu, bcr (manpage)
Differential Revision: https://reviews.freebsd.org/D29722
In vmstat there is a switch statement that converts these attributes to
a string. As some values can be duplicate we have to hide these from
userspace.
Replace this switch statement with an if ... else macro that lets us
repeat values without a compiler error.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D29703
implementation. The old description was left over from the 4.4 BSD Lite
import in 1994, and was a bit misleading (not all arches use simulated
reference bits, some implement reference tracking in hardware).
In 2018, r338094 removed the commented-out code for supporting the -t
command line option which had been present since the BSD 4.4 Lite import,
but was never implemented for freebsd.
This does the same for the man page.
The few columns that are not humanized are usually 0. This makes
the output mostly aligned.
Reviewed by: allanjude
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D22185
- UMA_XDOMAIN enables an additional per-cpu bucket for freed memory that
was freed on a different domain from where it was allocated. This is
only used for UMA_ZONE_NUMA (first-touch) zones.
- UMA_FIRSTTOUCH sets the default UMA policy to be first-touch for all
zones. This tries to maintain locality for kernel memory.
Reviewed by: gallatin, alc, kib
Tested by: pho, gallatin
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20929
Historically we have not distinguished between kernel wirings and user
wirings for accounting purposes. User wirings (via mlock(2)) were
subject to a global limit on the number of wired pages, so if large
swaths of physical memory were wired by the kernel, as happens with
the ZFS ARC among other things, the limit could be exceeded, causing
user wirings to fail.
The change adds a new counter, v_user_wire_count, which counts the
number of virtual pages wired by user processes via mlock(2) and
mlockall(2). Only user-wired pages are subject to the system-wide
limit which helps provide some safety against deadlocks. In
particular, while sources of kernel wirings typically support some
backpressure mechanism, there is no way to reclaim user-wired pages
shorting of killing the wiring process. The limit is exported as
vm.max_user_wired, renamed from vm.max_wired, and changed from u_int
to u_long.
The choice to count virtual user-wired pages rather than physical
pages was done for simplicity. There are mechanisms that can cause
user-wired mappings to be destroyed while maintaining a wiring of
the backing physical page; these make it difficult to accurately
track user wirings at the physical page layer.
The change also closes some holes which allowed user wirings to succeed
even when they would cause the system limit to be exceeded. For
instance, mmap() may now fail with ENOMEM in a process that has called
mlockall(MCL_FUTURE) if the new mapping would cause the user wiring
limit to be exceeded.
Note that bhyve -S is subject to the user wiring limit, which defaults
to 1/3 of physical RAM. Users that wish to exceed the limit must tune
vm.max_user_wired.
Reviewed by: kib, ngie (mlock() test changes)
Tested by: pho (earlier version)
MFC after: 45 days
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D19908
Previously, x86 used static ranges of IRQ values for different types
of I/O interrupts. Interrupt pins on I/O APICs and 8259A PICs used
IRQ values from 0 to 254. MSI interrupts used a compile-time-defined
range starting at 256, and Xen event channels used a
compile-time-defined range after MSI. Some recent systems have more
than 255 I/O APIC interrupt pins which resulted in those IRQ values
overflowing into the MSI range triggering an assertion failure.
Replace statically assigned ranges with dynamic ranges. Do a single
pass computing the sizes of the IRQ ranges (PICs, MSI, Xen) to
determine the total number of IRQs required. Allocate the interrupt
source and interrupt count arrays dynamically once this pass has
completed. To minimize runtime complexity these arrays are only sized
once during bootup. The PIC range is determined by the PICs present
in the system. The MSI and Xen ranges continue to use a fixed size,
though this does make it possible to turn the MSI range size into a
tunable in the future.
As a result, various places are updated to use dynamic limits instead
of constants. In addition, the vmstat(8) utility has been taught to
understand that some kernels may treat 'intrcnt' and 'intrnames' as
pointers rather than arrays when extracting interrupt stats from a
crashdump. This is determined by the presence (vs absence) of a
global 'nintrcnt' symbol.
This change reverts r189404 which worked around a buggy BIOS which
enumerated an I/O APIC twice (using the same memory mapped address for
both entries but using an IRQ base of 256 for one entry and a valid
IRQ base for the second entry). Making the "base" of MSI IRQ values
dynamic avoids the panic that r189404 worked around, and there may now
be valid I/O APICs with an IRQ base above 256 which this workaround
would incorrectly skip.
If in the future the issue reported in PR 130483 reoccurs, we will
have to add a pass over the I/O APIC entries in the MADT to detect
duplicates using the memory mapped address and use some strategy to
choose the "correct" one.
While here, reserve room in intrcnts for the Hyper-V counters.
PR: 229429, 130483
Reviewed by: kib, royger, cem
Tested by: royger (Xen), kib (DMAR)
Approved by: re (gjb)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D16861
It was #ifdef'd out in the 4.4BSD import and hasn't been re-enabled
since then.
Reviewed by: kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D16804
Continue my parade on introspection tools by fixing:
- failed to check for null after reallocf
- avoid the comma operator
- mark usage as dead
- correct size of len
If the interrupt count is very high (greater than ~42M), notably on one-shot
execution on long running systems, the intermediate multiplication step in the
rate calculation will overflow the width of a 32-bit architecture long (32
bits), causing the rest of the calculation to calculate with a truncated value,
and report very low rates (sometimes 0).
MFC after: 2 weeks
- The process stats are actually thread counts rather than process
counts.
- Simplify various descriptions to remove mention of stats that are
updated every 5 seconds (all VM related stats are now "instant",
only the load average is updated every 5 seconds).
- Don't make any mention of special treatment for processes that have
been active in the last 20 seconds. We don't track that stat.
- Rework the description of active virtual memory. Call it mapped
virtual memory and explicitly point out it is not the same as the
active page queue (which corresponds to "Active" in top(1)), and
also hint at the possible bogusness of the value (e.g. if a process
maps a single page out of a multiple GB file, the entire file's size
is considered mapped).
- Simplify a few descriptions that implied their output was a value
per interval. All of the "rate" values are per-second rates scaled
across the interval.
- Update a few comments for 'struct vmtotal' along similar lines.
Reported by: mwlucas (indirectly)
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D13905
The NetBSD tests for vmstat are basically just a smoke test, ensuring that
executing `vmstat` and `vmstat -s` exit successfully. This is more than we
test now, so go with it.
Based on the patch by: Pawel Biernacki <pawel.biernacki@gmail.com>
Sponsored by: Mysterious Code Ltd. (Pawel),
The FreeBSD Foundation (me)
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D13228
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
In the libxo output from vmstat, the number of pages that have been
paged out uses the same key name as the number of times pages have been
paged. Appears to have been a typo or copy-pasto.
PR: 222198
Submitted by: Yavuz Tanriverdi <stemix@gmail.com>
Reviewed by: phil, garga
Differential Revision: https://reviews.freebsd.org/D12395
When displaying in non-human form, if the free-memory number
is large (more than 7 digits), there is no space between it and
the page fault column.
PR: 221290
Submitted by: Josuah Demangeon <mail@josuah.net> (Original version)
in place. To do per-cpu stats, convert all fields that previously were
maintained in the vmmeters that sit in pcpus to counter(9).
- Since some vmmeter stats may be touched at very early stages of boot,
before we have set up UMA and we can do counter_u64_alloc(), provide an
early counter mechanism:
o Leave one spare uint64_t in struct pcpu, named pc_early_dummy_counter.
o Point counter(9) fields of vmmeter to pcpu[0].pc_early_dummy_counter,
so that at early stages of boot, before counters are allocated we already
point to a counter that can be safely written to.
o For sparc64 that required a whole dummy pcpu[MAXCPU] array.
Further related changes:
- Don't include vmmeter.h into pcpu.h.
- vm.stats.vm.v_swappgsout and vm.stats.vm.v_swappgsin changed to 64-bit,
to match kernel representation.
- struct vmmeter hidden under _KERNEL, and only vmstat(1) is an exclusion.
This is based on benno@'s 4-year old patch:
https://lists.freebsd.org/pipermail/freebsd-arch/2013-July/014471.html
Reviewed by: kib, gallatin, marius, lidl
Differential Revision: https://reviews.freebsd.org/D10156
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
stop vmstat -i segfaulting
remove duplicate header from vmstat -i
do not pad the name of the interupt in encoded outputs
fix stray % and missing } in the header for vmstat -i
add outer container to vmstat -i
add missing xo_flush in vmstat -i (when run with an interval or delay)
add outer container to vmstat -m
do not pad the name of malloc areans
add outer container to vmstat -z
do not pad the name of memory zones
Reviewed by: rodrigc
Approved by: bapt (mentor)
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D4263
Unfortunately filemon/meta mode tracks all indirect dependencies here
since ld(1) is reading libelf when linking in libkvm. Churn would be
reduced if this was able to be limited to direct dependencies.
Sponsored by: EMC / Isilon Storage Division
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.
Still need to add real targets under targets/ to build packages.
Differential Revision: D2796
Reviewed by: brooks imp
examined via 'vmstat -o'. It can be used to determine which files are
using physical pages of memory and how much each is using.
Differential Revision: https://reviews.freebsd.org/D2277
Reviewed by: alc, kib
MFC after: 2 weeks
Sponsored by: Norse Corp, Inc. (forward porting to HEAD/10)