an error if the argument to pciconf -a doesn't have a unit number, rather
than triggering an assertion failure.
PR: 194506
Reported by: Anthony Cornehl <accornehl@gmail.com>
Sponsored by: EMC / Isilon Storage Division
bhyve doesn't emulate the MSRs needed to support this feature at this time.
Don't expose any model-specific RAS and performance monitoring features in
cpuid leaf 80000007H.
Emulate a few more MSRs for AMD: TSEG base address, TSEG address mask and
BIOS signature and P-state related MSRs.
This eliminates all the unimplemented MSRs accessed by Linux/x86_64 kernels
2.6.32, 3.10.0 and 3.17.0.
PxCMD.ST from '1' to '0' and back. This allows the driver a chance to
recover if for instance a timeout occurred due to activity on the
host.
Reviewed by: grehan
emulating a large number of MSRs.
Ignore writes to a couple more AMD-specific MSRs and return 0 on read.
This further reduces the unimplemented MSRs accessed by a Linux guest on boot.
CPUID.80000001H:ECX.
Handle accesses to PerfCtrX and PerfEvtSelX MSRs by ignoring writes and
returning 0 on reads.
This further reduces the number of unimplemented MSRs hit by a Linux guest
during boot.
This gets rid of the "TSC doesn't count with P0 frequency!" message when
booting a Linux guest.
Tested on an "AMD Opteron 6320" courtesy of Ben Perrault.
have wildcards. This makes it possible for autofs(4) to avoid requesting
automountd(8) action on access to nonexistent nodes - unless wildcards
are actually used.
Note that this change breaks ABI for automountd(8).
Tested by: dhw@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
prevent fatal conflict should one-true-awk ever be replaced -- e.g., in
an appliance -- with GNU awk. NB: Renamed my implementation to _asorti()
MFC after: 3 days
X-MFC-to: stable/10, stable/9
This allows us to use libevent for other application in the future.
For now libevent is still INTERNALLIB and no shared library is installed.
MFC after: 1 month
Make this subcommand less FC-specific, reporting target and port addresses
in more generic way. Also make it report list of connected initiators in
unified way, working for both FC and iSCSI, and potentially others.
MFC after: 1 week
options to display some key VMCB fields.
The set of valid options that can be passed to bhyvectl now depends on the
processor type. AMD-specific options are identified by a "--vmcb" or "--avic"
in the option name. Intel-specific options are identified by a "--vmcs" in
the option name.
Submitted by: Anish Gupta (akgupt3@gmail.com)
Such LUNs will be visible to initiators, but return "not ready" status
on media access commands. If backing storage become available later,
`ctladm modify ...` or `service ctld reload` can trigger its reopen.
values. Therefore the bit width of the "PM Timer Block" was actually being
interpreted as 50-bits instead of the expected 32-bit.
This eliminates an error message emitted by a Linux 3.17 guest during boot:
"Invalid length for FADT/PmTimerBlock: 50, using default 32"
Reviewed by: grehan
MFC after: 1 week
This gets rid of the following error message during FreeBSD guest bootup:
"vtbd0: hard error cmd=flush fsbn 0"
Reported by: rodrigc
Reviewed by: grehan
configuration value is an integer count of seconds, it is not a timeval.
Using memcpy() to copy a timeval from it put garbage into the tv_usec
field.
PR: 194025
Submitted by: David Shane Holden <dpejesh@yahoo.com>
MFC after: 1 week
The new IASL from the recent acpi-ca import will error out
if it doesn't see these new fields, which were previously
reserved.
Reported by: lme
Reviewed by: neel
while here:
+ Fix an issue when extracting small archives where dialog_mixedgauge was
not rendering; leaving the user wondering if anything happened.
+ Add #ifdef's to assuage compilation against older libarchive
NB: Minimize diff between branches; make merging easier.
+ Add missing calls to end_dialog(3)
+ Change string processing from strtok(3) to strcspn(3) (O(1) optimization)
+ Use EXIT_SUCCESS and EXIT_FAILURE instead of 0/1
+ Optimize getenv(3) use, using stored results instead of calling repeatedly
NB: Fixes copy/paste error wherein we display getenv(BSDINSTALL_DISTDIR) in
an error msgbox when chdir(2) to getenv(BSDINSTALL_CHROOT) fails
(wrong variable displayed in msgbox).
+ Use strtol(3) instead of [deprecated] atoi(3)
+ Add additional error checking (e.g., check return of archive_read_new(3))
+ Assign DECONST strings to static variables
+ Fix typo in distextract.c error message (s/Could could/Could not/)
+ Add comments and make a minor whitespace adjustment
Reviewed by: nwhitehorn, julian
Use adequately sized buffer for error(s) (512 -> PATH_MAX + 512).
Fix the following style(9) nits while here:
- distfetch.c uses PATH_MAX while distextract.c uses MAXPATHLEN;
standardize on one (PATH_MAX)
- Move $FreeBSD$ from comment to __FBSDID()
- Sort included headers (alphabetically, sys/* at top)
- Add missing header includes (e.g., <stdlib.h> for getenv(3),
calloc(3)/malloc(3)/free(3), and atoi(3); <string.h> for strdup(3),
strrchr(3), strsep(3), and strcmp(3); <ctype.h> for isspace(3); and
<unistd.h> for chdir(2), etc.)
- Remove rogue newline at end of distfetch.c
- Don't declare variables in if-, while-, or other statement
NB: To prevent masking of prior declarations atop function
- Perform stack alignment for variable declarations
- Add missing function prototype for count_files() in distextract.c
- Break out single-line multivariable-declarations
NB: Aligning similarly-named variables with one-char difference(s)
NB: Minimizes diffs and makes future diffs more clear
- Use err(3) family of functions (requires s/int err;/int retval;/g)
Reviewed by: nwhitehorn, julian
ZFS property canmount=off so that /var/db/pkg and other such directories
are part of the / dataset, and only /var/mail, /var/log, and /var/crash
are excluded from the ZFS boot environment (beadm).
PR: 193971
Approved by: jmg
MFC after: ASAP
Relnotes: yes
Sponsored by: ScaleEngine Inc.
made automountd(8) mix them up: trying to access the second one would
trigger mount for the first one.
foo host:/foo
foobar host:/foobar
PR: 193584
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
The mixed little/big-endianness of SMBIOS UUIDs was clarified in v2.6
of the SMBIOS spec. dmidecode uses the reported version of SMBIOS to
determine the layout and what to byte-swap.
bhyve's SMBIOS reported as 2.4 though it implemented the 2.6-style of
memory layout. This resulted in dmidecode reporting a different
UUID than one passed in via the -U option.
Fix by exporting a version of 2.6.
Reviewed by: tychon
Reported by: julian
MFC after: 1 day
code. There are only a handful of MSRs common between the two so there isn't
too much duplicate functionality.
The VT-x code has the following types of MSRs:
- MSRs that are unconditionally saved/restored on every guest/host context
switch (e.g., MSR_GSBASE).
- MSRs that are restored to guest values on entry to vmx_run() and saved
before returning. This is an optimization for MSRs that are not used in
host kernel context (e.g., MSR_KGSBASE).
- MSRs that are emulated and every access by the guest causes a trap into
the hypervisor (e.g., MSR_IA32_MISC_ENABLE).
Reviewed by: grehan
reload also if that size was not specified in the new configuration.
Previously it happened only if size was explicitly changed in config.
MFC after: 3 days
Makefiles should not assume that source files can be overwritten. This is the
common case for Perforce source trees.
This is a followup commit to r211243 in the same vein.
MFC after: 1 month
Sponsored by: Spectra Logic
MFSpectraBSD: r1036319 on 2014/01/29, r1046711 on 2014/03/06
the minimum image size specified is always less than the maximum
image size. If makefs(1) is invoked specifying minimum image size,
but not maximum one, the program exits with an error. Example:
# sudo -E makefs -M 538968064 -B be /home/davide/disk.img $DESTDIR
makefs: `/home/davide/tftproot/mips' minsize of 538968064 rounded up
to ffs bsize of 8192 exceeds maxsize 0. Lower bsize, or round the
minimum and maximum sizes to bsize.
Assert then that minsize < maxsize iff maxsize is specified.
This change allows me to build MIPS images using makefs(1) and following
what specified in the wiki again.
Reviewed by: jmallett, ngie
VM-exit and ultimately on whether nRIP is valid. This allows us to update
the %rip after the emulation is finished so any exceptions triggered during
the emulation will point to the right instruction.
Don't attempt to handle INS/OUTS VM-exits unless the DecodeAssist capability
is available. The effective segment field in EXITINFO1 is not valid without
this capability.
Add VM_EXITCODE_SVM to flag SVM VM-exits that cannot be handled. Provide the
VMCB fields exitinfo1 and exitinfo2 as collateral to help with debugging.
Provide a SVM VM-exit handler to dump the exitcode, exitinfo1 and exitinfo2
fields in bhyve(8).
Reviewed by: Anish Gupta (akgupt3@gmail.com)
Reviewed by: grehan
reality. In particular, draw a connection between the auto ZFS script and
the auto UFS one, since they fulfill similar functions. I'm not sure the
auto ZFS code is actually experimental anymore, so it might be worth
changing that label still.
It allows to bypass range checks between UNMAP and READ/WRITE commands,
which may introduce additional delays while waiting for UNMAP parameters.
READ and WRITE commands are always processed in safe order since their
range checks are almost free.
many thanks for their continued support of FreeBSD.
While I'm there, also implement a new build knob, WITHOUT_HYPERV to
disable building and installing of the HyperV utilities when necessary.
The HyperV utilities are only built for i386 and amd64 targets.
This is a stable/10 candidate for inclusion with 10.1-RELEASE.
Submitted by: Wei Hu <weh microsoft com>
MFC after: 1 week
if we got a Login Response PDU without the "T" bit set, try again with
an empty request. This fixes interoperability with COMSTAR.
Reviewed by: mav@
Tested by: mav@
MFC after: 1 week
merge(1), which is part of the RCS package, it must not be installed if
WITHOUT_RCS update is set. Otherwise, it will produce confusing errors.
CR: https://reviews.freebsd.org/D691
MFC after: 1 week
Sponsored by: Spectra Logic
NetBSD's virtio-net implementation doesn't negotiate
the merged rx-buffers feature. To support this, check
to see if the feature was negotiated, and then adjust
the operation of the receive path accordingly by using
a larger iovec, and a smaller rx header.
In addition, ignore writes to the (read-only) status byte.
Tested with NetBSD/amd64 5.2.2, 6.1.4 and 7-beta.
Reviewed by: neel, tychon
Phabric: D745
MFC after: 3 days
when the initiator skips security negotiation. This fixes interoperability
with Xtend SAN initiator.
PR: 193021
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Note that this is a workaround, not a proper solution. If you know
lex well, and want to help - please let me know, I'll explain how it
should work.
PR: 192968
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
used prior to f_dialog_init() -- e.g., in a script that sets
DIALOG_SELF_INITIALIZE to NULL, preventing f_dialog_init() from being run
automaticaly when `dialog.subr' is included. Caused by sub-shell processing
of arguments inheriting prior value of $OPTIND, used by getopts. Solved by
unsetting OPTIND prior to [re-]processing of positional arguments.
While there, add a NO_WTHREAD_SAFETY flag that can be used to disable
this specific warning flag. Disable it for auditdistd. We can easily
patch up auditdistd to have the right annotations to build, but as
auditdistd is intended to be portable across other operating systems,
it's not worth the effort.
Approved by: brueffer@
packets at all. Swapping byte order on SOCK_RAW was actually a bug, an
artifact from the BSD network stack, that used to convert a packet to
native byte order once it is received by kernel.
Other operating systems didn't follow this, and later other BSD
descendants fixed this, leaving us alone with the bug. Now it is
clear that we should fix the bug.
In collaboration with: Olivier Cochard-Labbé <olivier cochard.me>
See also: https://wiki.freebsd.org/SOCK_RAW
Sponsored by: Nginx, Inc.
in the emulation of the task switch. If any exceptions are triggered then the
guest %rip should point to instruction that caused the task switch as opposed
to the one after it.
Also, add a missing LIBPANEL dependency for lldb
Approved by: rpaulo (mentor)
Suggested by: brooks
MFC after: 5 days
Phabric: D675 (as part of a larger diff)
PR: 192762
The executable itself doesn't contain any privileged information.
An example of where this is useful is when makefs(8) is creating an image
that includes /sbin/shutdown. This can now be done without root privileges.
Reviewed by: delphij
Discussed with: delphij, des
CR: https://reviews.freebsd.org/D662
Sometimes nmount(2) will fail without setting errmsg. The previous (ignored)
error would then be shown as the reason for the failed call if the next
nmount(2) also fails without [ENOENT,ENOTSUP].
An example is when there is a tmpfs mounted with -o size. vfs_filteropt() adds
'size' as an error in errmsg due to 'size' not being in tmpfs_updateopts. Then
tmpfs_mount returns [ENOTSUP] from nmount(2), which is then ignored. The next
call may race with an unmount causing an invalid [EINVAL] that then does log an
error, with the tmpfs errmsg.
The race itself is a separate issue to fix as it is expected to have an
[ENOENT] returned instead.
In this example the mount being shown is actually nullfs, not tmpfs that the
error is from.
mountd[740]: can't delete exports for /poudriere/data/.m/exp-head-commit-test-devel/04/.npkg: Invalid argument mount option <size> is unknown
It should only show:
mountd[740]: can't delete exports for /poudriere/data/.m/exp-head-commit-test-devel/04/.npkg: Invalid argument
MFC after: 2 weeks
1. 50+% of NO_PIE use is fixed by adding -fPIC to INTERNALLIB and other
build-only utility libraries.
2. Another 40% is fixed by generating _pic.a variants of various libraries.
3. Some of the NO_PIE use is a bit absurd as it is disabling PIE (and ASLR)
where it never would work anyhow, such as csu or loader. This suggests
there may be better ways of adding support to the tree. Many of these
cases can be fixed such that -fPIE will work but there is really no
reason to have it in those cases.
4. Some of the uses are working around hacks done to some Makefiles that are
really building libraries but have been using bsd.prog.mk because the code
is cleaner. Had they been using bsd.lib.mk then NO_PIE would not have
been needed.
We likely do want to enable PIE by default (opt-out) for non-tree consumers
(such as ports). For in-tree though we probably want to only enable PIE
(opt-in) for common attack targets such as remote service daemons and setuid
utilities. This is also a great performance compromise since ASLR is expected
to reduce performance. As such it does not make sense to enable it in all
utilities such as ls(1) that have little benefit to having it enabled.
Reported by: kib
UNIX systems, eg. MacOS X and Solaris. It uses Sun-compatible map format,
has proper kernel support, and LDAP integration.
There are still a few outstanding problems; they will be fixed shortly.
Reviewed by: allanjude@, emaste@, kib@, wblock@ (earlier versions)
Phabric: D523
MFC after: 2 weeks
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Add the ACPI MCFG table to advertise the extended config memory window.
Introduce a new flag MEM_F_IMMUTABLE for memory ranges that cannot be deleted
or moved in the guest's address space. The PCI extended config space is an
example of an immutable memory range.
Add emulation for the "movzw" instruction. This instruction is used by FreeBSD
to read a 16-bit extended config space register.
CR: https://phabric.freebsd.org/D505
Reviewed by: jhb, grehan
Requested by: tychon
Make sure everything linking to a privatelib and/or an internallib does it directly
from the OBJDIR rather than DESTDIR.
Add src.libnames.mk so bsd.libnames.mk is not polluted by libraries not existsing
in final installation
Introduce the LD* variable which is what ld(1) is expecting (via LDADD) to link to
internal/privatelib
Directly link to the .so in case of private library to avoid having to complexify
LDFLAGS.
Phabric: https://phabric.freebsd.org/D553
Reviewed by: imp, emaste
null terminate.
Temporarily use "From: $user@$hostname" rather than "From: $user".
The latter exposes incompatible behavior if using dma(8). sendmail(8)
(and other alternatives) canonify either form on submission (even
if masquerading), but dma will leak a non-compliant address to
the internet.
This allows for CARP interfaces to be used in jails e.g.
ip4.addr = "em0|10.10.1.20/32 vhid 1 pass MyPass advskew 100"
Before this change using exec.prestart to configure a CARP address
would result in the wrong MAC being broadcast on startup as jail creates
IP aliases to support ip[4|6].addr before exec.prestart is executed.
PR: 191832
Reviewed by: jamie
MFC after: 1 week
X-MFC-With: r269340
Phabric: D528
Sponsored by: Multiplay
expect (require) data on stdin. The effect of this is that, when
backgrounded, $! returns the pid of an Xdialog(1) instance instead of
an sh(1) instance -- the difference being a later kill of $! will reach
the Xdialog(1) instance whereas without the exec the kill succeeds on
the sh(1) instance leaving Xdialog(1) open.
ability to specify the the full path name of the keymap file.
Instead leave the original search order intact, but insert the path for
newcons-specific fonts (if run on a system using newcons):
- KEYMAP_PATH in environment
- full path name
- /usr/share/vt/keymaps (only if newcons is in use!)
- /usr/share/syscons/keymaps (also as fall-back for newcons)
MFC after: 1 week
newcons specific keymap files, not prefix[2]. The result of this bug was
that kbdcontrol ignored the files in the syscons keymap directory, which
apparently still work under newcons, for most locales.
MFC after: 1 week
change 0 means success and non-zero means failure.
This also helps to eliminate VMEXIT_POWEROFF and VMEXIT_RESET as return values
from VM-exit handlers.
CR: D480
Reviewed by: grehan, jhb
The faulting instruction needs to be restarted when the exception handler
is done handling the fault. bhyve now does this correctly by setting
'vmexit[vcpu].inst_length' to zero so the %rip is not advanced.
A minor complication is that the fault injection APIs are used by instruction
emulation code that is shared by vmm.ko and bhyve. Thus the argument that
refers to 'struct vm *' in kernel or 'struct vmctx *' in userspace needs to
be loosely typed as a 'void *'.
properly clustered.
Change `fixedsize' to `fixedsize = true' to satisfy newer versions of dot(1)
generating error "Warning: <stdin>: syntax error in line 27 near ','".
Remove bounding cluster surrounding various include-groupings, allowing
groups of include files to float freely to the greatest consumer (reducing
the density of rendered diagrams).
While here, change the bgcolor of include clusters from white to X11 color
`thistle' (a light purple).
Also, add the word "Subroutines" after include cluster labels.
Do not terminate the digraph definition with a semi-colon [;] after the
ending brace to satisfy newer versions of dot(1) generating error "Warning:
<stdin>: syntax error in line 940 near ';'".
MFC after: 3 days
X-MFC-to: stable/10, stable/9
a list of packages using the bsdconfig(8) API, providing dialog(8) based
user experience (versus plain console output were you to use pkg(8)
directly to install the same list of packages).
Remove example script `browse_packages_ftp.sh', made obsolete because
the digests.txz and packagesite.txz databases for pkg(8) are not
available via FTP (HTTP only to pkg.freebsd.org SRV hosts).
Update example script `browse_packages_http.sh', made to work with new
pkg(8) demonstrating how to generate a local package repository.
Fix a bug in `bsdconfig packages' where packages were listed twice. This
fix requires pkg(8) version 1.2.7_4 or higher.
NB: It is the introduction of pkg(8) 1.2.7_4 wherein I am also able to
drastically reduce the generation time of package dependencies prior to
the dialog display (by utilizing the new `-I' flag to pkg-rquery(8)).
While here, fix a positional argument nit for f_index_initialize() of
`packages/index.subr' include (the one and only argument is positional
argument 1 to state the by-ref handle, indicating the variable to set
in the caller's namespace; the nit I'm fixing here is that we were
querying positional argument 2 for this information incorrectly; caused
by a missing hunk back around SVN r257795).
Fix a bug in sysrc(8) described by PR bin/187458 "sysrc(8) silently and
unexpectedly bootstraps pkg". This was caused by an explicit entry in
`/usr/share/bsdconfig/common.subr' (used by sysrc(8)) that called pkg(8)
to populate the $PKG_ABI global (called in a way that allows implicit
bootstrap of pkg(8)). The solution to which was to find every place in
bsdconfig(8) that requires the $PKG_ABI global and add a layer of
protection by way of introducing the new API call f_musthavepkg_init()
(provided by new include, `/usr/share/bsdconfig/packages/musthavepkg.subr'
intented to mirror `/usr/share/bsdconfig/mustberoot.subr'). When the
$PKG_ABI global is required, you can use `f_musthavepkg_init' to cause
graceful premature termination in the event that pkg(8) has not yet been
bootstrapped, and thus cannot be used to populate $PKG_ABI.
NB: If running interactively ($nonInteractive is NULL or unset), the
f_musthavepkg_init() API call will attempt to bootstrap pkg(8), but only
if the user chooses "Yes" to a Yes/No dialog confirming it is ok to
bootstrap.
While here, simplify an if-conditional in `media/http.subr' include to
use sh(1) inline assignment-with-break.
Also, fix a bug in `media/http.subr' and `media/httpproxy.subr' wherein
the error messages for various HTTP failures were not finding their way
to the console (needed to pass stdout to pass-thru descriptor).
While here, remove the executable bit from `packages/categories.subr',
`packages/index.subr', and `packages/packages.subr' includes.
Fix issues where pkg(8) complains about PACKAGESITE being defined.
Previously, we would set $PACKAGESITE and export it. Now we only set
$PACKAGESITE for invocations of "pkg update" -- getting rid of all the
spurious warnings about PACKAGESITE being deprecated (it's still used
in the case of "pkg update" for simplicity versus having to configure
a config-file).
Remove the leading argument from invocations of f_index_initialize() in
`packages/packages.subr' include. The leading argument no longer means
what it used to, pre SVN r257995).
PR: bin/187458
Reviewed by: nwhitehorn
MFC after: 1 week
X-MFC-to: stable/10, stable/9
A nested exception condition arises when a second exception is triggered while
delivering the first exception. Most nested exceptions can be handled serially
but some are converted into a double fault. If an exception is generated during
delivery of a double fault then the virtual machine shuts down as a result of
a triple fault.
vm_exit_intinfo() is used to record that a VM-exit happened while an event was
being delivered through the IDT. If an exception is triggered while handling
the VM-exit it will be treated like a nested exception.
vm_entry_intinfo() is used by processor-specific code to get the event to be
injected into the guest on the next VM-entry. This function is responsible for
deciding the disposition of nested exceptions.
+ Make `sysrc -x foo' produce error status if foo is unset.
NB: Reported by lme (everything else ``while I'm at it'')
+ Remove mention of SYSRC_VERBOSE from `sysrc --help' output.
NB: False documentation leftover from an ancient precursor.
+ Make `sysrc -qc foo' work the same as `sysrc -ic foo' when foo is unset
NB: For syntax convenience (my fingers know `-q' more than `-i').
+ Update description of `-c' flag in help message/manual.
+ Update description of `-q' flag in help message/manual.
+ Make `sysrc -vc foo' work as documented in the manual
NB: Show message stating whether foo is currently set.
+ Make `sysrc -vc foo=1' work as documented in the manual
NB: Show message stating how value of foo would be changed (if at all).
+ Remove odd usage of parentheses in `-R dir' section of manual.
+ Clarify syntax section of manual w/respect to sysctl(8) similarities.
+ Add new/missing people to the `THANKS TO' section of the manual.
Reported by: lme
MFC after: 3 days
X-MFC-to: stable/10, stable/9, ports
variants. This allows usable file system images (i.e. those with both a
shell and an editor) to be created with only one copy of the curses library.
Exp-run: antoine
PR: 189842
Discussed with: bapt
Sponsored by: DARPA, AFRL
To use tmux in an rc.d script, use the new-session flag "-d".
To use screen in an rc.d script, use the "-dm" flag.
If you really need to launch an attached session, manually
export TERM=xterm (FreeBSD 9.0 or higher) or export TERM=cons25
for older releases.
Reported by: bdrewery
Discussed on: src-committers, svn-src-all, svn-src-head
PR: bin/191869
This allows to clone VMs and move them between LUNs inside one storage
host without generating extra network traffic to the initiator and back,
and without being limited by network bandwidth.
LUNs participating in copy operation should have UNIQUE NAA or EUI IDs set.
For LUNs without these IDs VMWare will use traditional copy operations.
Beware: the above LUN IDs explicitly set to values non-unique from the VM
cluster point of view may cause data corruption if wrong LUN is addressed!
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
would behave differently when utilizing rc-script was invoked manually vs.
service(8). The issue being that these utilities require the TERM environ
variable to be set and service(8) was not passing it down.
Reported by: Michael Dexter <editor@callfortesting.org>
PR: bin/191869
Reviewed by: allanjude
MFC after: 3 days
X-MFC-to: stable/10, stable/9
This includes:
o All directories named *ia64*
o All files named *ia64*
o All ia64-specific code guarded by __ia64__
o All ia64-specific makefile logic
o Mention of ia64 in comments and documentation
This excludes:
o Everything under contrib/
o Everything under crypto/
o sys/xen/interface
o sys/sys/elf_common.h
Discussed at: BSDcan
teardown, and new port creation during `service ctld restart`.
Close it by returning iSCSI port internal state, that allows to identify
dying ports, which should not be counted as existing, from really alive.
Previously ISID was changed every time, that made impossible correct
persistent reservation, because reconnected session was identified as
completely new one.
Reviewed by: trasz
MFC after: 1 week
Instead make ports provide wanted port and target IDs, and LUNs provide
wanted LUN IDs. After that core Device ID VPD code only had to link all
of them together and add relative port and port group numbers.
LUN ID for iSCSI LUNs no longer created by CTL, but by ctld, and passed
to CTL as "scsiname" LUN option. This makes LUNs to report the same set
of IDs, independently from the port through which it is accessed, as
required by SCSI specifications.
Having single port for all iSCSI connections makes problematic implementing
some more advanced SCSI functionality in CTL, that require proper ports
enumeration and identification.
This change extends CTL iSCSI API, making ctld daemon to control list of
iSCSI ports in CTL. When new target is defined in config fine, ctld will
create respective port in CTL. When target is removed -- port will be
also removed after all active commands through that port properly aborted.
This change require ctld to be rebuilt to match the kernel.
As a minor side effect, this allows to have iSCSI targets without LUNs.
While that may look odd and not very useful, that is not incorrect.
partitions of types other than "freebsd-boot" (in particular, "efi").
This allows the removal of some nasty hacks for supporting PowerPC systems,
in particular aliasing freebsd-boot to apple-boot on APM and an IBM-specific
code on MBR.
This changes the installer to use the correct names, which also breaks a
degeneracy in the meaning of "freebsd-boot" that allows the addition
of support for some newer IBM systems that can boot from GPT in addition to
MBR. Since I have no idea how to detect which those systems are, leave
the default on IBM PPC systems as MBR for now.
As sc(4) and vt(4) coexist and are both enabled in GENERIC, the existence
of a vt(4) sysctl is not sufficient to determine that vt(4) is in use.
Reported by: Trond Endrestøl
retrieve the sensor temperature.
This also avoid the overflow that could happen on sysctlnametomib(3)
because the code was not checking the length of the mib array.
CID: 1222504
Previuosly given 'foo,bar' members, removing 'foo' would result in an
infinite loop.
PR: 191427
Submitted by: Voradesh Yenbut <yenbut cs.washington.edu>
MFC after: 1 week
