Add a static assert for the siginfo_t, mcontext_t and ucontext_t
sizes. These are de-facto ABI options and cannot change size ever.
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D34210
Summary:
This switch is based off of the AR8327/AR8337 external switch/PHY.
However unlike the AR8327/AR8337 it itself doesn't have any PHYs;
instead an external PHY connects to it using the PSGMII port.
Differential Revision: https://reviews.freebsd.org/D34112
Reviewed by: manu
This code is inspired by the ar40xx code in openwrt, which itself
is based on the Qualcomm QCA-SSDK. Both of these sources are, amusingly,
BSD licenced - and thus I have included some of the comments in the
hardware workaround paths to document some of the magic numbers.
This adds support for the IPQ4018/IPQ4019 MDIO bus. This is used to
talk to external PHYs and switches. (There's an internal switch
in the IPQ4018/IPQ4019 as well, but it's accessible via MMIO/AXI.)
Differential Revision: https://reviews.freebsd.org/D34110
Reviewed by: manu
This adds the PT_GETREGSET and PT_SETREGSET ptrace types. These can be
used to access all the registers from a specified core dump note type.
The NT_PRSTATUS and NT_FPREGSET notes are initially supported. Other
machine-dependant types are expected to be added in the future.
The ptrace addr points to a struct iovec pointing at memory to hold the
registers along with its length. On success the length in the iovec is
updated to tell userspace the actual length the kernel wrote or, if the
base address is NULL, the length the kernel would have written.
Because the data field is an int the arguments are backwards when
compared to the Linux PTRACE_GETREGSET call.
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19831
Rather than fetching the ps_strings address directly from a process'
sysentvec, use this macro. With stack address randomization the
ps_strings address is no longer fixed.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33704
The size of the ps_strings structure varies between ABIs, so this is
useful for computing the address of the ps_strings structure relative to
the top of the stack when stack address randomization is enabled.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33704
Missed issues in truss on at least armv7 and powerpcspe need to be
resolved before recommit.
This reverts commit 3889fb8af0.
This reverts commit 1544e0f5d1.
This more clearly differentiates system call arguments from integer
registers and return values. On current architectures it has no effect,
but on architectures where pointers are not integers (CHERI) and may
not even share registers (CHERI-MIPS) it is necessiary to differentiate
between system call arguments (syscallarg_t) and integer register values
(register_t).
Obtained from: CheriBSD
Reviewed by: imp, kib
Differential Revision: https://reviews.freebsd.org/D33780
Remove the macros that define the Arm barriers on Armv5 and earlier. We
don't support these CPUs.
Reviewed by: imp
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33807
The _ARM_ARCH_* and _HAVE_ARMv*_INSTRUCTIONS macros are FreeBSD
specific. Remove them as they are unused in the base system.
Reviewed by: imp
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33806
- Move busdma_lock_mutex to subr_bus_dma.c.
- Move _busdma_lock_dflt to subr_bus_dma.c. This function was named a
couple of different things previously. It is not a public API but
an internal helper used in place of a NULL pointer. The prototype
is in <sys/bus_dma.h> as not all backends include
<sys/bus_dma_internal.h>.
Reviewed by: kib
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D33694
Move mostly duplicated code in various MD bus_dma backends to support
bounce pages into sys/kern/subr_busdma_bounce.c. This file is
currently #include'd into the backends rather than compiled standalone
since it requires access to internal members of opaque bus_dma
structures such as bus_dmamap_t and bus_dma_tag_t.
Reviewed by: kib
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D33684
Add driver for Marvell, Armada-37xx peripheral clock.
Register clocks for various peripheral devices in
north bridge or south bridge domain. Dump clock's
domain while verbose boot.
Reviewed by:
Obtained from: Semihalf
Differential revision: https://reviews.freebsd.org/D32294
Driver for tbg clocks. Read reference frequency from parent
and modify it depending on parameters read from register.
Reviewed by: manu
Obtained from: Semihalf
Differential revision: https://reviews.freebsd.org/D32293
Driver registers new clock device. Clock frequency is set depending
on tenth bit's value obtained from syscon register. Full information
about the clock is dumped if bootverbose is enabled.
Driver was tested on EspressoBin.
Reviewed by: manu
Obtained from: Semihalf
Differential revision: https://reviews.freebsd.org/D32292
A recent change introduced a one-off error into a test allowing
coalescing chunks into segments. This fixes that error.
broke a check in _bus_dmamap_addseg on many architectures. This change makes it clear that it is not a particular range that is being boundary-checked, but the proposed union of the two adjacent ranges.
Reported by: se
Reviewed by: se
Fixes: c606ab59e7 vm_extern: use standard address checkers everywhere
Differential Revision: https://reviews.freebsd.org/D33715
Define simple functions for alignment and boundary checks and use them
everywhere instead of having slightly different implementations
scattered about. Define them in vm_extern.h and use them where
possible where vm_extern.h is included.
Reviewed by: kib, markj
Differential Revision: https://reviews.freebsd.org/D33685
When a DMA request using bounce pages completes, a swi is triggered to
schedule pending DMA requests using the just-freed bounce pages. For
a long time this bus_dma swi has been tied to a "virtual memory" swi
(swi_vm). However, all of the swi_vm implementations are the same and
consist of checking a flag (busdma_swi_pending) which is always true
and if set calling busdma_swi. I suspect this dates back to the
pre-SMPng days and that the intention was for swi_vm to serve as a
mux. However, in the current scheme there's no need for the mux.
Instead, remove swi_vm and vm_ih. Each bus_dma implementation that
uses bounce pages is responsible for creating its own swi (busdma_ih)
which it now schedules directly. This swi invokes busdma_swi directly
removing the need for busdma_swi_pending.
One consequence is that the swi now works on RISC-V which had previously
failed to invoke busdma_swi from swi_vm.
Reviewed by: imp, kib
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D33447
This adds some very simple DWC3 glue for the IPQ4018/IPQ4019.
Other chipsets introduce reset line iteration, some further
clock line iteration and some customisations; I'll look at adding
those later.
This is enough to finally bring up USB 3.0 on my IPQ4018 ASUS
RT-58U router.
This adds the USB 2.0 and 3.0 PHY support for the IPQ4018/IPQ4019.
All it really needs to do is gate the relevant clocks on/off in the
right order with the right delays.
The Qualcomm TCSR is some top level glue between multiple IP blocks,
both for doing configuration of said IP blocks, some IPC between
them (mostly between multiple execution environments - eg trustzone
and non-TZ), and interrupt status bits for them.
However, for the IPQ4018/IPQ4019, it only is used as a small subset
of IP block configuration. As for what it actually gets used as
for other Qualcomm chipsets? Well, that'll have to wait.
It's a bit of a mess in linux and openwrt. See, every different
SoC support branch ends up with some different TCSR code for it.
So instead, I'm going to land a single TCSR driver that I'm going
to use for the IPQ4018/IPQ4019. When I add the next chipset, I'll
figure out how to organise things so there's a single TCSR driver
that works for multiple platforms.
The Qualcomm Universal Peripherals Engine (QUP) is a unified SPI and I2C
peripheral that ships with a variety of Qualcomm SoCs.
It supports three transfer modes - single PIO, block PIO and DMA.
This driver only supports the single PIO mode, which is enough to
bootstrap the rest of the SPI NAND/NOR support and means I can do
things like read the Wifi calibration data from NOR. It has some
hardware support code for the other transfer modes as well as
some support for split transfers (ie, transfers with no read or
write phase), but I haven't yet implemented those.
This driver is based on four sources - the linux driver, the u-boot
driver, some initial work done for APQ8064 by mmel@, and the APQ8064
Technical Reference Manual which is surprisingly free and open to
read. The linux and u-boot drivers approach a variety of things
completely differently, from how PIO is done, the hardware support
for re-ordering bytes in a transfer word and how the CS lines
are used.
Tested:
* IPQ4018, SPI to NAND/NOR flash, PIO only
Now that the clock drivers are in the tree, the cpufreq driver will
"just work".
Tested:
* IPQ4018, testing performance of dd from /dev/zero->/dev/null at
each frequency step.
Summary: I've tested this with cpufreq_dt, SPI and USB. They all seem to work fine.
Test Plan: * IPQ4018, boot
Subscribers: imp, andrew
Differential Revision: https://reviews.freebsd.org/D33665
These clock nodes are used by the IPQ4018/IPQ4019 and derivatives.
They're also used by other 32 and 64 bit qualcomm parts; so it's
best to put these nodes here in a single qcom_clk driver and add
to it as we grow new Qualcomm SoC support.
Tested:
* IPQ4018, boot
Differential Revision: https://reviews.freebsd.org/D33665
The qualcomm TLMM (top level mode manager) is their gpio/pinmux hardware
controller.
Although the pinmux is generic enough to use for the IPQ/APQ series
chips, I'm directly calling the IPQ4018 routines to expedite bring-up.
Notably, I'm not yet implementing the interrupt support - it's not
required at this stage of bring-up.
Differential Revision: https://reviews.freebsd.org/D33554
This driver does not use DMA at the moment, so some care is needed to
prevent TX FIFO underruns and RX FIFO overflows.
Several improvements are done in oder to minimize chances of those.
First, the interrupt handling is moved to a filter to minimize latency.
Second, FIFO trigger thresholds are configured for both FIFOs.
The TX FIFO threshold is set to 3/4-th of its size and the RX FIFO
threshold is set to 1/4-th of its size.
The interrupt conditions are changed from the empty FIFO and full FIFO
for the TX and RX correspondingly to going below and above the thresholds.
While here I renamed AW_SPI_IER_RF_ERQ to AW_SPI_IER_RF_RDY which is
closer to what the documentation uses, RF_RDY_INT_EN in the interrupt
control register and RX_RDY in the interrupt status register.
Reviewed by: manu
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D33558
The header exports the following:
- Definition of struct tcb.
- Helpers to get/set the tcb for the current thread.
- TLS_TCB_SIZE (size of TCB)
- TLS_TCB_ALIGN (alignment of TCB)
- TLS_VARIANT_I or TLS_VARIANT_II
- TLS_DTV_OFFSET (bias of pointers in dtv[])
- TLS_TP_OFFSET (bias of "thread pointer" relative to TCB)
Note that TLS_TP_OFFSET does not account for if the unbiased thread
pointer points to the start of the TCB (arm and x86) or the end of the
TCB (MIPS, PowerPC, and RISC-V).
Note also that for amd64, the struct tcb does not include the unused
tcb_spare field included in the current structure in libthr. libthr
does not use this field, and the existing calls in libc and rtld that
allocate a TCB for amd64 assume it is the size of 3 Elf_Addr's (and
thus do not allocate room for tcb_spare).
A <sys/_tls_variant_i.h> header is used by architectures using
Variant I TLS which uses a common struct tcb.
Reviewed by: kib (older version of x86/tls.h), jrtc27
Sponsored by: The University of Cambridge, Google Inc.
Differential Revision: https://reviews.freebsd.org/D33351
After a round of cleanups in late 2020, all definitions are
functionally identical.
This removes a rotted __aligned(8) on arm. It was added in
b7112ead32 and was intended to align the
args member so that 64-bit types (off_t, etc) could be safely read on
armeb compiled with clang. With the removal of armev, this is no
longer needed (armv7 requires that 32-bit aligned reads of 64-bit
values be supported and we enable such support on armv6). As further
evidence this is unnecessary, cleanups to struct syscall_args have
resulted in args being 32-bit aligned on 32-bit systems. The sole
effect is to bloat the struct by 4 bytes.
Reviewed by: kib, jhb, imp
Differential Revision: https://reviews.freebsd.org/D33308
This definition enables callers to estimate remaining space on the
kstack, and take action on it. Notably, it enables optimizations in the
GEOM and netgraph subsystems to directly dispatch work items when there
is sufficient stack space, rather than queuing them for a worker thread.
Implement it for riscv, arm, and mips. Remove the #ifdefs, so it will
not go unimplemented elsewhere.
PR: 259157
Reviewed by: mav, kib, markj (previous version)
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32580
Add a new ioctl to vt to make it possible to export RGB offsets
set by vt drivers. This is needed to fix colors on X and Mesa
on some machines, especially on modern PowerPC64 BE ones.
With the appropriate changes in SCFB, to use this ioctl to find
out the correct RGB offsets, this fixes wrong colors on Talos II
and Blackbird, when used with their built-in video cards.
Reviewed by: alfredo
Sponsored by: Instituto de Pesquisas Eldorado (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D29000
in_cksum() and related routines are implemented separately for each
platform, but only i386 and arm have optimized versions. Other
platforms' copies of in_cksum.c are identical except for style
differences and support for big-endian CPUs.
Deduplicate the implementations for the rest of the platforms. This
will make it easier to implement in_cksum() for unmapped mbufs. On arm
and i386, define HAVE_MD_IN_CKSUM to mean that the MI implementation is
not to be compiled.
No functional change intended.
Reviewed by: kp, glebius
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33095
When constructing the set of dumpable pages, use the bitset provided by
the state argument, rather than assuming vm_page_dump invariably. For
normal kernel minidumps this will be a pointer to vm_page_dump, but when
dumping the live system it will not.
To do this, the functions in vm_dumpset.h are extended to accept the
desired bitset as an argument. Note that this provided bitset is assumed
to be derived from vm_page_dump, and therefore has the same size.
Reviewed by: kib, markj, jhb
MFC after: 2 weeks
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D31992
Don't assume we are dumping the global message buffer, but use the one
provided by the state argument. While here, drop superfluous
cast to char *.
Reviewed by: markj, jhb
MFC after: 2 weeks
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D31991
