r256095:
- Add gnu/usr.bin/rcs back to the base system.
r256120:
- Add WITHOUT_RCS back to src.conf.5.
r256121:
- Remove UPDATING entry regarding gnu/usr.bin/rcs removal.
Requested by: many
Approved by: re (marius)
Discussed with: core
The libarchive-based replacements have been used since 2009; the GNU
ones were kept to support source upgrades from FreeBSD 6.
Approved by: re@ (delphij)
This connects LLDB to the build, but it is disabled by default. Add
WITH_LLDB= to src.conf to build it.
Note that LLDB requires a C++11 compiler so is disabled on platforms
using GCC.
Approved by: re (gjb)
Sponsored by: DARPA, AFRL
To enable them, set WITH_GCC and WITH_GNUCXX in src.conf.
Make clang default to using libc++ on FreeBSD 10.
Bumped __FreeBSD_version for the change.
GCC is still enabled on PC98, because the PC98 bootloader requires GCC to build
(or, at least, hard-codes the use of gcc into its build).
Thanks to everyone who helped make the ports tree ready for this (and bapt
for coordinating them all). Also to imp for reviewing this and working on the
forward-porting of the changes in our gcc so that we're getting to a much
better place with regard to external toolchains.
Sorry to all of the people who helped who I forgot to mention by name.
Reviewed by: bapt, imp, dim, ...
As promised, drop the option to make the older GNU patch
the default.
GNU patch is still being built but something drastic may
happen to it to it before Release.
The BSD-licensed patch(1) command has matured and it's behaviour
can be considered equivalent to the older version of GNU patch
in the tree.
The switch has been extensively tested [1] and only two ports
presented regressions, which have since been fixed.
For convenience a new WITH_GNU_PATCH option is available,
but it will likely be removed in the near future.
PR: 176313
Approved by: portmgr
make the ARM EABI the default ABI on arm, armeb, armv6 and armv6eb.
This is intended to be the default ABI from now on with the old ABI to be
retired. Because of this all users are strongly suggested to upgrade to the
ARM EABI.
As the two ABIs are incompatible it is unlikely upgrading in place will
work. Users should perform a full backup and either use an external machine
to upgrade, or install to an alternative location on their media. They
should also reinstall all ports or packages when these are available.
The only known issues are:
- pkg incorrectly detects the ABI. This is fixed upstream, and will a
patch will be made to the port.
- GDB can have issues with executables built with clang.
__FreeBSD_version has been bumped.
This is a workaround for WITH_LDNS_UTILS forcing BIND_UTILS off. It can
be reverted when we no longer have these conflicting options, or made more
general if we grow more cases like this.
debug files for userland programs and libraries. The "-g" debug flag
is automatically applied when WITH_DEBUG_FILES is set.
The debug files are now named ${prog}.debug and ${shlib}.debug for
consistency with other systems and documentation. In addition they are
installed under /usr/lib/debug, to simplify the process of installing
them if needed after a crash. Users of bsd.{prog,lib}.mk outside of the
base system place the standalone debug files in a .debug subdirectory.
GDB automatically searches both of these directories for standalone
debug files.
Thanks to everyone who contributed changes, review, and testing during
development.
specified by passing the XCC, XCXX, and XCPP variables (corresponding to
CC, CXX, and CPP) to buildworld/buildkernel. The compiler must be clang
or be configured to target the appropriate architecture.
To speed build times, if XCC is an absolute path or
WITHOUT_CROSS_COMPILER is defined then no cross compiler will be built
during the cross-tools stage.
Limited documentation of this feature can currently be found at:
https://wiki.freebsd.org/ExternalToolchain
This functionality should be considered experimental and is subject to
change without notice.
Sponsored by: DARPA, AFRL
Discussed with: imp, sjg
The European version of the patent expired in 2011.
The US version of the patent expired in 2012 or prior.
Reviewed by: des
No objection from: cperciva, ehaupt
Dont use/link ARCMT, StaticAnalyzer and Rewriter to clang when the user
specifies not to. Dont build ASTMatchers with Rewriter disabled and
StaticAnalyzer when it's disabled.
Without all those three, the clang binary shrinks (x86_64) from ~36MB
to ~32MB (unstripped).
To disable these clang components, and get a smaller clang binary built
and installed, set WITHOUT_CLANG_FULL in src.conf(5). During the
initial stages of buildworld, those extra components are already
disabled automatically, to save some build time.
MFC after: 1 week
DragonflyBSD and install it as bsdpatch. WITH_BSD_PATCH makes it
default and installs GNU patch as gnupatch.
Submitted by: pfg
Obtained from: The DragonflyBSD Project
ARM EABI support is disabled by default and can be enabled by setting
WITH_ARM_EABI when building, however only the kernel-toolchain target will
work with this flag until the rest of the support is added.
which, only after authentication, disables crypto, and only for sessions
without a terminal.
Submitted by: Jeremy Chadwick (freebsd jdc.parodius.com)
PR: bin/163095
MFC after: 10 days
but committing it helps to get everyone on the same page and makes
sure we make progress.
Tinderbox breakages that are the result of this commit are entirely
the committer's fault -- in other words: buildworld testing on amd64
only.
Credits follow:
Submitted by: Garrett Cooper <yanegomi@gmail.com>
Sponsored by: Isilon Systems
Based on work by: keramida@
Thanks to: gnn@, mdf@, mlaier@, sjg@
Special thanks to: keramida@
of FreeBSD's make by setting WITH_BMAKE. The WITH_BMAKE build makes it
easy for people to switch while working out the kinks -- think ports
tree here. The option will be removed in due time.
Submitted by: Simon Gerraty (sjg@juniper.net)
deprecated sysinstall(8). NOTE: WITH_BSDCONFIG is currently required.
Submitted by: Devin Teske (dteske), Ron McDowell <rcm@fuzzwad.org>
Reviewed by: Ron McDowell <rcm@fuzzwad.org>
Approved by: Ed Maste (emaste)
Do not condition usr.sbin/pkg building on WITHOUT_PKGTOOLS anymore, so that users can
remove the old pkg_* tools without removing the pkgng boostrap
Approved by: des (mentor)
MFC after: 1 month
"gnusort". Most of the BSD sort development work was done by
Oleg Moskalenko <oleg.moskalenko@citrix.com>.
- GNU grep can be set to default by setting WITH_GNU_GREP. It will cause
BSD sort to be installed as "bsdsort".
Portbuild tested by: linimon
The NAND Flash environment consists of several distinct components:
- NAND framework (drivers harness for NAND controllers and NAND chips)
- NAND simulator (NANDsim)
- NAND file system (NAND FS)
- Companion tools and utilities
- Documentation (manual pages)
This work is still experimental. Please use with caution.
Obtained from: Semihalf
Supported by: FreeBSD Foundation, Juniper Networks
"bsdsort" and GNU sort will be the default "sort". When WITH_BSD_SORT
is set, BSD sort will be the default "sort" and GNU sort will be installed
as "gnusort".
installs clang as /usr/bin/cc, /usr/bin/c++ and /usr/bin/cpp.
Note this does *not* disable building and installing gcc, which will
still be available as /usr/bin/gcc, /usr/bin/g++ and /usr/bin/gcpp. If
you want to disable gcc completely, you must use WITHOUT_GCC.
MFC after: 2 weeks
At first, I added a utility called utxrm(8) to remove stale entries from
the user accounting database. It seems there are cases in which we need
to perform different operations on the database as well. Simply rename
utxrm(8) to utx(8) and place the old code under the "rm" command.
In addition to "rm", this tool supports "boot" and "shutdown", which are
going to be used by an rc-script which I am going to commit separately.
kernel modules that include binary-only code.
More fine-grained control is provided via MK_SOURCELESS_HOST (for native code
that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode).
Reviewed by: julian, delphij, freebsd-arch
Approved by: kib (mentor)
MFC after: 2 weeks
The wtmpcvt(1) utility converts wtmp files to the new format used by
utmpx(3). Now that HEAD has been branched to stable/9 and 9.0 is
released, there is no need for it in HEAD.
MFC after: never
This knob removes the tools that are exclusively used to view and
maintain the databases maintained by utmpx, namely last, users, who,
wtmpcvt, ac, lastlogin and utxrm.
The tool w is not in this list, because it has some other functionality
which is unrelated to utmpx; it is hardlinked to the uptime tool.
The WITHOUT_ACCT switch is supposed to omit tools related to process
accounting, namely accton and sa. ac(8) is just a simple tool that
prints statistics based on data in the utx.log database. It has nothing
to do with the former.
If WITH_BSD_GREP is not set, it will be 'bsdgrep' and GNUgrep will be
'[ef]grep'. Otherwise, BSD-grep will be the grep family, and GNUgrep
will be 'gnugrep'.
Discussed with: brooks
the architecture, reflect this in documentation. For such
options, both WITH_FOO and WITHOUT_FOO description files should
be provided.
Prodded by: des
- Setting a build option may enforce other build options, try harder
to detect this case.
- Setting a build option may change other option's default value,
try harder to detect this case.
with INET6 equivalents. Patch reather than re-genenerating src.conf
(given the current problem with the script that does the re-gen).
Reviewed by: gnn
Sponsored by: The FreeBSD Foundation
Sponsored by: iXsystems
MFC after: 2 weeks
flags, so remove that part from WITHOUT_CXX again.
This is only partially regenerated, as the entries for FDT and GPIO seem to
have switched their default state, too.
WITHOUT_CLANG.
Don't build clang bootstrap/build-tools depending on this flag. We also
keep gperf, devd and libstdc++ around to prevent foot-shooting and to
make this a two-way street.
A full featured groff is required during buildworld, so build it always
and don't rely on it being present on the host system.
vgrind(1) is tightly coupled to a roff processor and will not be
built/installed when groff is disabled. Also much of the roff'ed
documentation under share/doc will not be built/installed when
WITHOUT_GROFF is defined.
Reviewed by: ru (partial)
Deliverables: Small and clean code (1,4 KSLOC vs GNU's 8,5 KSLOC),
lower memory usage than GNU grep, GNU compatibility,
BSD license.
TODO: Performance is somewhat behind GNU grep but it is only
significant for bigger searches. The reason is complex, the
most important factor is that GNU grep uses lots of
optimizations to improve the speed of the regex library.
First, we need a modern regex library (practically by adopting
TRE), add support for GNU-style non-standard regexes and then
reevalute the performance issues and look for bottlenecks. In
the meantime, for those, who need better performance, it is
possible to build GNU grep by setting WITH_GNU_GREP.
Approved by: delphij (mentor)
Obtained from: OpenBSD (http://www.openbsd.org/cgi-bin/cvsweb/src/usr.bin/grep/),
freegrep (http://github.com/howardjp/freegrep)
Sponsored by: Google SoC 2008
Portbuild tests run by: kris, pav, erwin
Acknowledgements to: fjoe (as SoC 2008 mentor),
everyone who helped in reviewing and testing
Note that this is actually a no-op for most users, as this GNU
cpio was broken on -HEAD and 8-STABLE since last March until
the recent fix.
FreeBSD 8.0+ uses BSD cpio by default and the code is being
actively maintained.
Blessed by: kientzle
With hat: secteam
MFC after: 3 days
Not only did these two drivers depend on IFF_NEEDSGIANT, they were
broken 7 months ago during the MPSAFE TTY import. if_ppp(4) has been
replaced by ppp(8). There is no replacement for if_sl(4).
If we see regressions in for example the ports tree, we should just use
__FreeBSD_version 800045 to check whether if_ppp(4) and if_sl(4) are
present. Version 800045 is used to denote the import of MPSAFE TTY.
Discussed with: rwatson, but also rwatson's IFF_NEEDSGIANT emails on the
lists.