All other mlx5_events report the port number as 1 based, which is how FW
reports it in the port event EQE. Reporting 0 for this event causes
mlx5_ib to not raise a fatal event notification to registered clients
due to a seemingly invalid port.
All switch cases in mlx5_ib_event that go through the port check are
supposed to set the port now, so just do it once at variable
declaration.
Linux commit:
aba462134634b502d720e15b23154f21cfa277e5
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
The user can provide very large cqe_size which will cause to integer
overflow.
Linux commit:
28e9091e3119933c38933cb8fc48d5618eb784c8
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
Copy small packets like TCP ACKs into a new mbuf
reusing the existing mbuf to receive a new ethernet
frame. This avoids wasting buffer space for
small sized packets.
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
Adding an interface might be done outside the device_attach() routine
and will then cause a panic, due to the VNET not being defined.
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
The "priv->pkstats.rx_dropped" is written twice in a row.
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
Also when the MTU is greater than MCLBYTES.
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
The hardware queues are deep enough currently and using the DRBR and associated
callbacks only leads to more task switching in the TX path. The is also a race
setting the queue_state which can lead to hung TX rings.
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
In last mlx4 update (r325841) we lost the sysctl to show the
firmware version for mlx4 devices.
Add both board identifier and firmware version under:
sys.device.mlx4_core0.hw sysctl node.
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
Modify QP can fail and it can be acceptable, like when moving from RST to
ERR state, all the rest are not acceptable and a message to the log
should be printed.
The current code prints on all failures and many messages like:
"Failed to modify QP to ERROR state" appear, even when supported by the
state machine of the QP object.
Linux commit:
5dc78ad1904db597bdb4427f3ead437aae86f54c
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
When a packet needs fragmentation, it might generate more than 3 fragments.
With the queue length 3, all fragments are generated faster than the
queue is drained, which effectively drops fourth and later fragments on
the floor.
Submitted by: kib@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
When changing the MTU of ibX network interfaces, check that the MTU was really
changed before requesting an update of the multicast rules. Else we might go
into an infinite loop joining and leaving ibX multicast groups towards the
opensm master interface.
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
It is not enough to set ifnet->if_mtu to change the interface MTU.
System saves the MTU for route in the radix tree, and route cache keeps
the interface MTU as well. Since addition of the multicast group causes
recalculation of MTU, even bringing the interface up changes MTU from
4042 to 1500, which makes the system configuration inconsistent. Worse,
ip_output() prefers route MTU over interface MTU, so large packets are
not fragmented and dropped on floor.
Fix it for ipoib(4) using the same approach (or hack) as was applied
for it_tun/if_tap in r339012. Thanks to bz@ for giving the hint.
Submitted by: kib@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
Binding to a loopback device is not allowed. Make sure the destination
device address is global by clearing the bound device interface.
Only do this conditionally, else link local addresses won't work.
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
A couple of places in the CM do
spin_lock_irq(&cm_id_priv->lock);
...
if (cm_alloc_response_msg(work->port, work->mad_recv_wc, &msg))
However when the underlying transport is RoCE, this leads to a sleeping function
being called with the lock held - the callchain is
cm_alloc_response_msg() ->
ib_create_ah_from_wc() ->
ib_init_ah_from_wc() ->
rdma_addr_find_l2_eth_by_grh() ->
rdma_resolve_ip()
and rdma_resolve_ip() starts out by doing
req = kzalloc(sizeof *req, GFP_KERNEL);
not to mention rdma_addr_find_l2_eth_by_grh() doing
wait_for_completion(&ctx.comp);
to wait for the task that rdma_resolve_ip() queues up.
Fix this by moving the AH creation out of the lock.
Linux commit:
c76161181193985087cd716fdf69b5cb6cf9ee85
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
Trying to validate loopback fails because rtalloc1() resolves system
local addresses to the loopback network interface, lo0. Fix this by
explicitly checking for loopback during validation of the source
and destination network address. If the source address belongs to
a local network interface and is equal to the destination address,
there is no need to run the destination address through rtalloc1().
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
The master network interface and the VLANs may reside in different VNETs.
Make sure that all VNETs are searched when scanning for GID entries.
Submitted by: netapp
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
This prevents code from accepting RoCEv1 connections when
only ROCEv2 is enabled and vice versa.
Linux commit:
0c4386ec77cfcd0ccbdbe8c2e67dd3a49b2a4c7f
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
The array ib_mad_mgmt_class_table.method_table has MAX_MGMT_CLASS
(80) elements. Hence compare the array index with that value instead
of with IB_MGMT_MAX_METHODS (128). This patch avoids that Coverity
reports the following:
Overrunning array class->method_table of 80 8-byte elements at element index 127
(byte offset 1016) using index convert_mgmt_class(mad_hdr->mgmt_class)
(which evaluates to 127).
Linux commit:
2fe2f378dd45847d2643638c07a7658822087836
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
The port number in the listen_id_priv has been observed to be zero which
means no port has been selected. The current code lacks a check for invalid
port number.
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
Currently we always return false if for PCI offline query.
Try to read PCI config, if the return value if 0xffff probably the
PCI is offline.
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
Make sure we hold a reference on the character device for every opened file
to prevent the character device to be freed prematurely.
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
Changelist:
- Replace netmap passthrough host support with a more general
mechanism to call TXSYNC/RXSYNC from an in-kernel event-loop.
No kernel threads are used to use this feature: the application
is required to spawn a thread (or a process) and issue a
SYNC_KLOOP_START (NIOCCTRL) command in the thread body. The
kernel loop is executed by the ioctl implementation, which returns
to userspace only when a different thread calls SYNC_KLOOP_STOP
or the netmap file descriptor is closed.
- Update the if_ptnet driver to cope with the new data structures,
and prune all the obsolete ptnetmap code.
- Add support for "null" netmap ports, useful to allocate netmap_if,
netmap_ring and netmap buffers to be used by specialized applications
(e.g. hypervisors). TXSYNC/RXSYNC on these ports have no effect.
- Various fixes and code refactoring.
Sponsored by: Sunny Valley Networks
Differential Revision: https://reviews.freebsd.org/D18015
newvers.sh runs mkfifo which did not exist before this change.
However, I didn't notice before because it is run from a function
where a missing command does cause a noticeable failure.
Reviewed By: emaste, markj
Differential Revision: https://reviews.freebsd.org/D18377
This code has apparently never compiled on FreeBSD since its
introduction in 2004 (r130365). It has certainly not compiled
since 2006, when r164033 added #elsif [sic] preprocessor directives.
The code was left in the tree to reduce the diff from upstream (KAME).
Since that upstream is no longer relevant, remove the long-dead code.
This commit is the direct result of:
unifdef -m -UALTQ3_COMPAT sys/net/altq/*
A later commit will do some manual cleanup.
I do not plan to MFC this. If that would help you, go for it.
This was in the orignal patch, but lost in a rebase.
Reported by: andrew
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15816
handling slightly out-of-bound requests properly (r340187).
Perform range check here rather then rely on g_delete_data() to DTRT.
The g_delete_data() would always return success for requests
starting just the next byte after providers media boundary.
MFC after: 4 weeks
Have ogetkerninfo, ogetpagesize, ogethostname, osethostname, and oaccept
declare o<foo>_args structs rather than non-compat ones. Due to a
failure to use NOARGS in most cases this adds only one new declaration.
No changes required in freebsd32 as only ogetpagesize() is implemented
and it has a 32-bit specific implementation.
Reviewed by: kib
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15816
This can be useful, when net.inet.ip.fw.dyn_keep_states is enabled, but
after rules reloading some state must be deleted. Added new flag '-D'
for such purpose.
Retire '-e' flag, since there can not be expired states in the meaning
that this flag historically had.
Also add "verbose" mode for listing of dynamic states, it can be enabled
with '-v' flag and adds additional information to states list. This can
be useful for debugging.
Obtained from: Yandex LLC
MFC after: 2 months
Sponsored by: Yandex LLC
Turning on of this feature allows to keep dynamic states when parent
rule is deleted. But it works only when the default rule is
"allow from any to any".
Now when rule with dynamic opcode is going to be deleted, and
net.inet.ip.fw.dyn_keep_states is enabled, existing states will reference
named objects corresponding to this rule, and also reference the rule.
And when ipfw_dyn_lookup_state() will find state for deleted parent rule,
it will return the pointer to the deleted rule, that is still valid.
This implementation doesn't support O_LIMIT_PARENT rules.
The refcnt field was added to struct ip_fw to keep reference, also
next pointer added to be able iterate rules and not damage the content
when deleted rules are chained.
Named objects are referenced only when states are going to be deleted to
be able reuse kidx of named objects when new parent rules will be
installed.
ipfw_dyn_get_count() function was modified and now it also looks into
dynamic states and constructs maps of existing named objects. This is
needed to correctly export orphaned states into userland.
ipfw_free_rule() was changed to be global, since now dynamic state can
free rule, when it is expired and references counters becomes 1.
External actions subsystem also modified, since external actions can be
deregisterd and instances can be destroyed. In these cases deleted rules,
that are referenced by orphaned states, must be modified to prevent access
to freed memory. ipfw_dyn_reset_eaction(), ipfw_reset_eaction_instance()
functions added for these purposes.
Obtained from: Yandex LLC
MFC after: 2 months
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D17532
Mark some buses as BUS_PASS_BUS, and some resources as BUS_PASS_RESOURCE.
This also decouples some resource attachment orderings from being races by
device tree ordering, instead relying on the bus pass to provide the
ordering.
This was originally intended to support multipass suspend/resume, but it's
also needed on PowerMacs when using fdt, as the device tree seems to get
created in reverse of the OFW tree.
Reviewed by: nwhitehorn (long ago)
Differential Revision: https://reviews.freebsd.org/D918
The same behavior was moved to machdep.c, paired with AIM's relocation,
making this redundant. With this, it's now possible to boot FreeBSD with
ubldr on a uboot Book-E platform, even with a
KERNBASE != VM_MIN_KERNEL_ADDRESS.
Construct a struct image_args with the help of new exec_args_*() helper
functions and call kern_execve().
The previous code mapped a page in userspace, copied arguments out
to it one at a time, and then constructed a struct execve_args all so
that sys_execve() can call exec_copyin_args() to copy the data back in
to a struct image_args.
Opencode the part of pre_execve()/post_execve() that releases a
reference to the initial vmspace. We don't need to stop threads like
they do.
Reviewed by: kib, jhb (prior version)
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15469
If there is a vnode attached to the linux file, use it to fill
kinfo_file. Otherwise, report a new KF_TYPE_DEV file type, without
supplying any type-specific information.
KF_TYPE_DEV is supposed to be used by most devfs-specific file types.
Sponsored by: Mellanox Technologies
MFC after: 1 week
On some architectures, the structures returned by PT_GET*REGS were not
fully populated and could contain uninitialized stack memory. The same
issue existed with the register files in procfs.
Reported by: Thomas Barabosch, Fraunhofer FKIE
Reviewed by: kib
MFC after: 3 days
Security: kernel stack memory disclosure
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18421
loader has been supporting large_dnode for some time, no need to block the
feature for boot dataset.
Reviewed by: avg
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D18391
It's possible the fdt pointer was passed in via the metadata, as is done in
ubldr. Check for the fdt here, instead of working with a NULL fdt, and
panicking.
The metadata pointer will almost never be at or above 'btext', as btext is a
relocated symbol, so will be based at VM_MIN_KERNEL_ADDRESS, not at
KERNBASE. Check the address against kernload, where the kernel is
physically loaded.
Add generic implementation for bus_deactivate_resource method. Without
it bus_release_resource fails with "Failed to release active resource"
message
MFC after: 1 week
The object size is set in the dsp_mmap_single() which provides the
range limit by vm_fault().
Reported by: C Turt <ecturt@gmail.com>
Reviewed by: alc, markj
admbug: 781
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
The type represents byte offset in the vm_object_t data space, which
does not span negative offsets in FreeBSD VM. The change matches byte
offset signess with the unsignedness of the vm_pindex_t which
represents the type of the page indexes in the objects.
This allows to remove the UOFF_TO_IDX() macro which was used when we
have to forcibly interpret the type as unsigned anyway. Also it fixes
a lot of implicit bugs in the device drivers d_mmap methods.
Reviewed by: alc, markj (previous version)
Tested by: pho
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Fix p-state setting on Power8 by removing the accidental double-indirection of
the pstate_ids table.
The pstate_ids table comes from the OF property "ibm,pstate-ids." On Power9,
the values happen to be identical to the indices, so the extra indirection was
harmless. On Power8, the values were out of the range [0, npstates], so
pmcr_set() would fail the spec[0] range check with EINVAL.
While here, include both the value and index in the driver-specific register
array as spec[0] and spec[1] respectively. They're redundant, but relatively
harmless, and it may aid debugging.
While here, fix the range check to exclude the index npstates, which is one
past the last valid index.
PR: 233693
Reported and tested by: sbruno
Reviewed by: jhibbits
is dead). This includes collaterally removing code shared by HP/UX,
SGI, and Linux, where IP Filter will in all likelihood for various
reasons never run again.
MFC after: 1 week
PLLs on the RK3399 are different than the ones on the RK3328.
Add a new type and some dedicated recalc and set_freq functions.
Rename the RK3328 dedicated rk_clk_pll function with rk3328_ prefix.
MFC after: 1 month
following the MFV of r254219 into r255332. In addition the 'FreeBSD'
macro was never defined in ipfilter 5.1.2 thus it never would have
been enabled in the first place.
This work is prompted by a general cleanup of the IP Filter code
prompted by working to resolve a PR. More to follow.
MFC after: 1 week
If user configured the maxswapzone tunable, just take the literal
value for the initial zone sizing attempt. Before, it was only
possible to reduce the zone by the tunable.
While there, correct the message which was not correct when zone
creation rounded the size up.
Reported by: jmg
Reviewed by: markj
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D18381
See the review for sample test results.
Reviewed by: kib (kernel part)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18401
In rare situations[*] it's possible for two different interfaces to have
the same name. This confuses pf, because kifs are indexed by name (which
is assumed to be unique). As a result we can end up trying to
if_rele(NULL), which panics.
Explicitly checking the ifp pointer before if_rele() prevents the panic.
Note pf will likely behave in unexpected ways on the the overlapping
interfaces.
[*] Insert an interface in a vnet jail. Rename it to an interface which
exists on the host. Remove the jail. There are now two interfaces with
the same name in the host.
Fix reporting of SS_ONSTACK in nested signal delivery when sigaltstack()
is used on some architectures.
Add a unit test for this. I tested the test by introducing the bug
on amd64. I did not test it on other architectures.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D18347
Handling sizes of > 32 backwards will be updated later.
Reviewed by: kib (kernel part)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18387
Limiting the length to 2048 bytes seems to be acceptable, since
the values used right now are using 8 bytes.
Reviewed by: glebius, bz, rrs
MFC after: 3 days
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D18366
IFNET_RLOCK_NOSLEEP() is epoch_enter_preempt() in FreeBSD 12+. Holding
it in sysctl_rtsock() doesn't protect us from ifnet unlinking, because
unlinking occurs with IFNET_WLOCK(), that is rw_wlock+sx_xlock, and it
doesn check that concurrent code is running in epoch section. But while
we are in epoch section, we should be able to do access to ifnet's
fields, even it was unlinked. Thus do not change if_addr and if_hw_addr
fields in ifnet_detach_internal() to NULL, since rtsock code can do
access to these fields and this is allowed while it is running in epoch
section.
This should fix the race, when ifnet_detach_internal() unlinks ifnet
after we checked it for IFF_DYING in sysctl_dumpentry.
Move free(ifp->if_hw_addr) into ifnet_free_internal(). Also remove the
NULL check for ifp->if_description, since free(9) can correctly handle
NULL pointer.
MFC after: 1 week
This is the frequency of the cpu on the Pinebook so add it to make
cpufreq find the current setting.
Note that this dtbo on the Pinebook doesn't work right now as u-boot
dtb doesn't have symbols and so it fails to apply. Linux 4.20 have
the dts and will be imported once taggued.
MFC after: 1 month
X-MFC with: r341268
Early processing of a packet on transmit may change last seen
VLAN TCI in the queue context. If such a packet is eventually
dropped, last seen VLAN TCI must be set to its previous value.
Submitted by: Ivan Malov <Ivan.Malov at oktetlabs.ru>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18288
If an event handler requested an abort, only the inner loop was
guarenteed to be broken out of - the outer loop could continue
if total == batch.
Fix this by poisoning batch to ensure it is different to total.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18287
Revise the external port calculation to support all
X2 port modes. The previous algorithm could not
handle different port numbering schemes on each cage.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18285
Correct annotations where NULL input can be permitted
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18284
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18283
In efx_mcdi_phy_module_get_info() probe the
transceiver identification byte rather than assume
the module matches the fixed port type. This
supports scenarios such as a SFP mounted in a QSFP
port via a QSA module.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18282
Add a function which makes an MCDI GET_LINK request and
packages up the results. Currently, the get-link function
is triggered from several entry points which then pass
on or store selected parts of the data. When the driver
needs to obtain the current link state, it is more
efficient to do this in a single call.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18281
Previously only some of the code was guarded by this which caused
a build error when EFSYS_OPT_RX_SCALE is 0 (e.g. in manftest).
Submitted by: Tom Millington <tmillington at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18280
Limit the port mode bandwidth calculations by the maximum
reported link speed. This system detects 25G vs 10G cards,
and 100G port modes vs 40G.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18279
Change the interface to ef10_nic_get_port_mode_bandwidth()
so more NIC information can be used to infer bandwidth
requirements. Huntington calculations separated out
completely.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18278
Add cases for the new port modes supported by X2 NICs.
Lane bandwidth is calculated for pre-X2 cards so is an
underestimate for X2 in 25G/100G modes.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18277
>From Medford onwards, the newer constants enumerating
port modes should be used.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18276
Adjust data types in interface to permit the complete
module information buffer to be obtained in a single
call.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18275