Commit Graph

69 Commits

Author SHA1 Message Date
Gleb Smirnoff
1fc35e9e38 - Provide txp_get_counter() to return counters that are not collected,
but taken from hardware.
- Mechanically convert to if_inc_counter() the rest of counters.
2014-09-24 11:58:23 +00:00
Gleb Smirnoff
1bffa9511f Use define from if_var.h to access a field inside struct if_data,
that resides in struct ifnet.

Sponsored by:	Nginx, Inc.
2014-08-30 19:55:54 +00:00
Marcel Moolenaar
e7d939bda2 Remove ia64.
This includes:
o   All directories named *ia64*
o   All files named *ia64*
o   All ia64-specific code guarded by __ia64__
o   All ia64-specific makefile logic
o   Mention of ia64 in comments and documentation

This excludes:
o   Everything under contrib/
o   Everything under crypto/
o   sys/xen/interface
o   sys/sys/elf_common.h

Discussed at: BSDcan
2014-07-07 00:27:09 +00:00
John Baldwin
c34f1a08c6 Fix teardown of static DMA allocations in various NIC drivers:
- Add missing calls to bus_dmamap_unload() in et(4).
- Check the bus address against 0 to decide when to call
  bus_dmamap_unload() instead of comparing the bus_dma map against NULL.
- Check the virtual address against NULL to decide when to call
  bus_dmamem_free() instead of comparing the bus_dma map against NULL.
- Don't clear bus_dma map pointers to NULL for static allocations.
  Instead, treat the value as completely opaque.
- Pass the correct virtual address to bus_dmamem_free() in wpi(4) instead
  of trying to free a pointer to the virtual address.

Reviewed by:	yongari
2014-06-17 14:47:49 +00:00
Gleb Smirnoff
76039bc84f The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare
to this event, adding if_var.h to files that do need it. Also, include
all includes that now are included due to implicit pollution via if_var.h

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2013-10-26 17:58:36 +00:00
Gleb Smirnoff
c6499eccad Mechanically substitute flags from historic mbuf allocator with
malloc(9) flags in sys/dev.
2012-12-04 09:32:43 +00:00
John Baldwin
3b0a4aef96 Do a sweep of the tree replacing calls to pci_find_extcap() with calls to
pci_find_cap() instead.
2011-03-23 13:10:15 +00:00
Matthew D Fleming
6dc7dc9a3e sysctl(9) cleanup checkpoint: amd64 GENERIC builds cleanly.
Commit the rest of the devices.
2011-01-12 19:53:56 +00:00
Pyun YongHyeon
54d1bac5bb Make sure rx descriptor ring align on 16 bytes. I guess the
alignment requirement could be multiple of 4 bytes but I think
using descriptor size would make intention clearer.
Previously the size of rx descriptor was not power of 2 so it
caused panic in bus_dmamem_alloc(9).

Reported by:	Jeff Blank (jb000003 <> mr-happy dot com)
MFC after:	3 days
2009-08-31 22:09:48 +00:00
Robert Watson
eb956cd041 Use if_maddr_rlock()/if_maddr_runlock() rather than IF_ADDR_LOCK()/
IF_ADDR_UNLOCK() across network device drivers when accessing the
per-interface multicast address list, if_multiaddrs.  This will
allow us to change the locking strategy without affecting our driver
programming interface or binary interface.

For two wireless drivers, remove unnecessary locking, since they
don't actually access the multicast address list.

Approved by:	re (kib)
MFC after:	6 weeks
2009-06-26 11:45:06 +00:00
Pyun YongHyeon
c92b9c8898 bus_dma(9) conversion and make txp(4) work on all architectures.
o Header file cleanup.
o bus_dma(9) conversion.
  - Removed all consumers of vtophys(9) and converted to use
    bus_dma(9).
  - Typhoon2 functional specification says the controller supports
    64bit DMA addressing. However all Typhoon controllers are known
    to lack of DAC support so 64bit DMA support was disabled.
  - The hardware can't handle more 16 fragmented Tx DMA segments so
    teach txp(4) to collapse these segments to be less than 16.
  - Added Rx buffer alignment requirements(4 bytes alignment) and
    implemented fixup code to align receive frame. Previously
    txp(4) always copied Rx frame to align it on 2 byte boundary
    but its copy overhead is much higher than unaligned access on
    i386/amd64. Alignment fixup code is now applied only for
    strict-alignment architectures. With this change i386 and
    amd64 will get instant Rx performance boost. Typhoon2 datasheet
    mentions a command that pads arbitrary bytes in Rx buffer but
    that command does not work.
  - Nuked pointer trick in descriptor ring. This does not work on
    sparc64 and replaced it with bcopy. Alternatively txp(4) can
    embed a 32 bits index value into the descriptor and compute
    real buffer address but it may make code complicated.
  - Added endianness support code in various Tx/Rx/command/response
    descriptor access. With this change txp(4) should work on all
    architectures.
o Added comments for known firmware bugs(Tx checksum offloading,
  TSO, VLAN stripping and Rx buffer padding control).
o Prefer faster memory space register access to I/O space access.
  Added fall-back mechanism to use alternative I/O space access.
  The hardware supports both memory and I/O mapped access. Users
  can still force to use old I/O space access by setting
  hw.txp.prefer_iomap tunable to 1 in /boot/loader.conf.
o Added experimental suspend/resume methods.
o Nuke error prone Rx buffer handling code and implemented local
  buffer management with TAILQ. Be definition the controller can't
  pass the last received frame to host if no Rx free buffers are
  available to use as head and tail pointer of Rx descriptor ring
  can't have the same value. In that case the Rx buffer pointer in
  Rx buffer ring still holds a valid buffer and txp_rxbuf_reclaim()
  can't fill Rx buffers as the first buffer is still valid. Instead
  of relying on the value of Rx buffer ring, introduce local buffer
  management code to handle empty buffer situation. This should fix
  a long standing bug which completely hangs the controller under
  high network load. I could easily trigger the issue by sending 64
  bytes UDP frames with netperf. I have no idea how this bugs was
  not fixed for a long time.
o Converted ithread interrupt handler to filter based one.
o Rearranged txp_detach routine such that it's now used for general
  clean-up routine.
o Show sleep image version on device attach time. This will help
  to know what action should be taken depending on sleep image
  version. The version information in datasheet was wrong for newer
  NV images so I followed Linux which seems to correctly extract
  version numbers from response descriptors.
o Firmware image is no longer downloaded in device attach time. Now
  it is reloaded whenever if_init is invoked. This is to ensure
  correct operation of hardware when something goes wrong.
  Previously the controller always run without regard to running
  state of firmware. This change will add additional controller
  initialization time but it give more robust operation as txp(4)
  always start off from a known state. The controller is put into
  sleep state until administrator explicitly up the interface.
o As firmware is loaded in if_init handler, it's now possible to
  implement real watchdog timeout handler. When watchdog timer is
  expired, full-reset the controller and initialize the hardware
  again as most other drivers do. While I'm here use our own timer
  for watchdog instead of using if_watchdog/if_timer interface.
o Instead of masking specific interrupts with TXP_IMR register,
  program TXP_IER register with the interrupts to be raised and
  use TXP_IMR to toggle interrupt generation.
o Implemented txp_wait() to wait a specific state of a controller.
o Separate boot related code from txp_download_fw() and name it
  txp_boot() to handle boot process.
o Added bus_barrier(9) to host to ARM communication.
o Added endianness to all typhoon command processing. The ARM93C
  always expects little-endian format of command/data.
o Removed __STRICT_ALIGNMENT which is not valid on FreeBSD.
  __NO_STRICT_ALIGNMENT is provided for that purpose on FreeBSD.
  Previously __STRICT_ALIGNMENT was unconditionally defined for
  all architectures.
o Rewrote SIOCSIFCAP ioctl handler such that each capability can be
  controlled by ifconfig(8). Note, disabling VLAN hardware tagging
  has no effect due to the bug of firmware.
o Don't send TXP_CMD_CLEAR_STATISTICS to clear MAC statistics in
  txp_tick(). The command is not atomic. Instead, just read the
  statistics and reflect saved statistics to the statistics.
  dev.txp.%d.stats sysctl node provides detailed MAC statistics.
  This also reduces a lot of waste of CPU cycles as processing a
  command ring takes a very long time on ARM93C. Note, Rx
  multicast and broadcast statistics does not seem to right. It
  might be another bug of firmware.
o Implemented link state change handling in txp_tick(). Now sending
  packets is allowed only after establishing a valid link. Also
  invoke link state change notification whenever its state is
  changed so pseudo drivers like lagg(4) that relies on link state
  can work with failover or link aggregation without hacks.
  if_baudrate is updated to resolved speed so SNMP agents can get
  correct bandwidth parameters.
o Overhauled Tx routine such that it now honors number of allowable
  DMA segments and checks for 4 free descriptors before trying to
  send a frame. A frame may require  4 descriptors(1 frame
  descriptor, 1 or more frame descriptors, 1 TSO option descriptor,
  one free descriptor to prevent descriptor wrap-around) at least
  so it's necessary to check available free descriptors prior to
  setting up DMA operation.
o Added a sysctl variable dev.txp.%d.process_limit to control
  how many received frames should be served in Rx handler. Valid
  ranges are 16 to 128(default 64) in unit of frames.
o Added ALTQ(4) support.
o Added missing IFCAP_VLAN_HWCSUM as txp(4) can offload checksum
  calculation as well as VLAN tag insertion/stripping.
o Fixed media header length for VLAN.
o Don't set if_mtu in device attach, it's already set in
  ether_ifattach().
o Enabled MWI.
o Fixed module unload panic when bpf listeners are active.
o Rearranged ethernet address programming logic such that it works
   on strict-alignment architectures.
o Removed unused member variables in softc.
o Added support for WOL.
o Removed now unused TXP_PCI_LOMEM/TXP_PCI_LOIO.
o Added wakeup command TXP_BOOTCMD_WAKEUP definition.
o Added a new firmware version query command, TXP_CMD_READ_VERSION.
o Removed volatile keyword in softc as bus_dmamap_sync(9) should
  take care of this.
o Removed embedded union trick of a structure used to to access
  a pointer on LP64 systems.
o Added a few TSO related definitions for struct txp_tcpseg_desc.
  However TSO is not used at all due to the limitation of hardware.
o Redefined PKT_MAX_PKTLEN to theoretical maximum size of a frame.
o Switched from bus_space_{read|write}_4 to bus_{read|write}_4.
o Added a new macro TXP_DESC_INC to compute next descriptor index.

Tested by:	don.nasco <> gmail dot com
2009-03-12 01:14:47 +00:00
Pyun YongHyeon
05dc172526 Replace local CRC32 routine with ether_crc32_be(). This should
have happened long time ago. Also simplify Rx filter logic.
2009-03-11 09:57:11 +00:00
Pyun YongHyeon
017bb6e5ee s/u_int8_t/uint8_t/g
s/u_int16_t/uint16_t/g
s/u_int32_t/uint32_t/g
s/u_int64_t/uint64_t/g
2009-03-11 09:06:39 +00:00
Pyun YongHyeon
40b9562f15 style(9) - space after keywords. 2009-03-11 08:49:17 +00:00
Pyun YongHyeon
223de9429e Remove return statement at the end of function that returns void. 2009-03-11 08:41:57 +00:00
Pyun YongHyeon
2c81d278e7 Remove extra tab characters. 2009-03-11 08:28:24 +00:00
Pyun YongHyeon
9475e437a3 K&R -> ANSI C function definitions. 2009-03-11 08:25:18 +00:00
Pyun YongHyeon
ec34372c0e Update to latest 3Com firmware image. The latest fimware is
required to make 3CR990 familiy controllers run on NV flash
firmware version 03.001.008.
The latest firmware added HMAC digest information so teach txp(4)
to pass them to sleep image before downloading is started.

While I'm here restore previous IMR/IER register if firmware
downloading have failed.

PR:	kern/89876, kern/132047
2009-02-25 01:12:56 +00:00
Roman Divacky
af83f5d77c Change the functions to ANSI in those cases where it breaks promotion
to int rule. See ISO C Standard: SS6.7.5.3:15.

Approved by:	kib (mentor)
Reviewed by:	warner
Tested by:	silence on -current
2009-02-24 18:09:31 +00:00
Pyun YongHyeon
55da31830a Read MII_ANAR register and get common denominator ability.
PR:	92599
2007-11-16 10:32:10 +00:00
Pyun YongHyeon
d612cc5947 IEEE 802.3 Annex 28B.3 explicitly specifies the following relative
priorities of the technologies supported by 802.3 Selector Field
value.

1000BASE-T full duplex
1000BASE-T
100BASE-T2 full duplex
100BASE-TX full duplex
100BASE-T2
100BASE-T4
100BASE-TX
10BASE-T full duplex
10BAST-T

However PHY drivers didn't honor the order such that 100BASE-T4 had
higher priority than 100BASE-TX full duplex. Fix that long standing
bugs such that have PHY drivers choose the highest common denominator
ability.
Fix a bug in dcphy which inadvertently aceepts 100BASE-T4.

PR:	92599
2007-11-16 10:25:36 +00:00
Pyun YongHyeon
66b255c049 Nuke duplicated __FBSDID. 2007-06-12 04:33:21 +00:00
Pyun YongHyeon
8b1568ff6e Add checks for contigmalloc(9) failure. 2007-06-12 04:30:30 +00:00
Christian S.J. Peron
59a0d28bac Catch up the rest of the drivers with the ether_vlan_mtap modifications.
If these drivers are setting M_VLANTAG because they are stripping the
layer 2 802.1Q headers, then they need to be re-inserting them so any
bpf(4) peers can properly decode them.

It should be noted that this is compiled tested only.

MFC after:	3 weeks
2007-03-04 03:38:08 +00:00
Paolo Pisati
ef544f6312 o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@
2007-02-23 12:19:07 +00:00
Andre Oppermann
78ba57b9e1 Move ethernet VLAN tags from mtags to its own mbuf packet header field
m_pkthdr.ether_vlan.  The presence of the M_VLANTAG flag on the mbuf
signifies the presence and validity of its content.

Drivers that support hardware VLAN tag stripping fill in the received
VLAN tag (containing both vlan and priority information) into the
ether_vtag mbuf packet header field:

	m->m_pkthdr.ether_vtag = vlan_id;	/* ntohs()? */
	m->m_flags |= M_VLANTAG;

to mark the packet m with the specified VLAN tag.

On output the driver should check the mbuf for the M_VLANTAG flag to
see if a VLAN tag is present and valid:

	if (m->m_flags & M_VLANTAG) {
		... = m->m_pkthdr.ether_vtag;	/* htons()? */
		... pass tag to hardware ...
	}

VLAN tags are stored in host byte order.  Byte swapping may be necessary.

(Note: This driver conversion was mechanic and did not add or remove any
byte swapping in the drivers.)

Remove zone_mtag_vlan UMA zone and MTAG_VLAN definition.  No more tag
memory allocation have to be done.

Reviewed by:	thompsa, yar
Sponsored by:	TCP/IP Optimization Fundraise 2005
2006-09-17 13:33:30 +00:00
Poul-Henning Kamp
c40da00ca3 Since DELAY() was moved, most <machine/clock.h> #includes have been
unnecessary.
2006-05-16 14:37:58 +00:00
Gleb Smirnoff
d147662cd3 - Fix VLAN_INPUT_TAG() macro, so that it doesn't touch mtag in
case if memory allocation failed.
- Remove fourth argument from VLAN_INPUT_TAG(), that was used
  incorrectly in almost all drivers. Indicate failure with
  mbuf value of NULL.

In collaboration with:	yongari, ru, sam
2005-12-18 18:24:27 +00:00
Ruslan Ermilov
4a0d6638b3 - Store pointer to the link-level address right in "struct ifnet"
rather than in ifindex_table[]; all (except one) accesses are
  through ifp anyway.  IF_LLADDR() works faster, and all (except
  one) ifaddr_byindex() users were converted to use ifp->if_addr.

- Stop storing a (pointer to) Ethernet address in "struct arpcom",
  and drop the IFP2ENADDR() macro; all users have been converted
  to use IF_LLADDR() instead.
2005-11-11 16:04:59 +00:00
Bill Paul
1ec14c6ee9 Remove call to txp_set_filter() from txp_attach(). txp_set_filter() needs
the ifp, so you can't call it before doing if_alloc(). Also, there's
really no need to call it here anyway: the code I originally ported from
OpenBSD incorrectly set the station address only once at device attach
time, instead of setting in txp_init(). This meant you couldn't change
the address with ifconfig txp0 ether xx:xx:xx:xx:xx:xx. I added the
call to txp_set_filter() in txp_init() to correct this, but forgot to
remove the call from txp_attach(). Until now, it never mattered.

With this fix, the txp driver tests good:

txp0: <3Com 3cR990-TX-97 Etherlink with 3XP Processor> port 0xb800-0xb87f mem 0xe6800000-0xe683ffff irq 12 at device 10.0 on pci0
txp0: Ethernet address: 00:01:03:d4:91:4f
2005-10-29 03:01:16 +00:00
John Baldwin
2bf266e6da - Add locking and mark MPSAFE. The driver had a mutex in the softc and
even initialized it, but it never used it.
- Use callout_*() to manage the callout.
- Use m_devget() to copy data out of the rx buffers rather than doing it
  all by hand.
- Use m_getcl() to allocate mbuf clusters rather than doing it all by hand.
- Don't free the software descriptor for a rx ring entry if we can't
  allocate an mbuf cluster for it.  We left a dangling pointer and never
  reallocated the entry anyway.  OpenBSD's code (from which this was
  derived) has the same bug.

Tested by:	NO ONE (despite repeated requests)
Reviewed by:	wpaul (5)
2005-10-27 21:16:17 +00:00
John Baldwin
78486f55ef - Use PCIR_BAR().
- Remove unused TXP_PCI_INTLINE and TXP_DEVNAME macros.
2005-10-03 15:47:15 +00:00
Warner Losh
ad4f426ef6 Make sure that we call if_free(ifp) after bus_teardown_intr. Since we
could get an interrupt after we free the ifp, and the interrupt
handler depended on the ifp being still alive, this could, in theory,
cause a crash.  Eliminate this possibility by moving the if_free to
after the bus_teardown_intr() call.
2005-09-19 03:10:21 +00:00
Ruslan Ermilov
35fb201bbe Fixed a diagnostic message. 2005-09-15 19:41:03 +00:00
John Baldwin
7b7b9810bd - Only call txp_release_resources() once if attach fails.
- Set errno to ENXIO instead of 0 in several attach failure cases.
- Setup the interrupt handler at the very end of txp_attach() after
  ether_ifattach().
- Various whitespace fixes in function prototypes.
2005-08-31 18:09:54 +00:00
Robert Watson
13f4c340ae Propagate rename of IFF_OACTIVE and IFF_RUNNING to IFF_DRV_OACTIVE and
IFF_DRV_RUNNING, as well as the move from ifnet.if_flags to
ifnet.if_drv_flags.  Device drivers are now responsible for
synchronizing access to these flags, as they are in if_drv_flags.  This
helps prevent races between the network stack and device driver in
maintaining the interface flags field.

Many __FreeBSD__ and __FreeBSD_version checks maintained and continued;
some less so.

Reviewed by:	pjd, bz
MFC after:	7 days
2005-08-09 10:20:02 +00:00
Robert Watson
13b203d0d7 Modify device drivers supporting multicast addresses to lock if_addr_mtx
over iteration of their multicast address lists when synchronizing the
hardware address filter with the network stack-maintained list.

Problem reported by:	Ed Maste (emaste at phaedrus dot sandvine dot ca>
MFC after:		1 week
2005-08-03 00:18:35 +00:00
Brooks Davis
fc74a9f93a Stop embedding struct ifnet at the top of driver softcs. Instead the
struct ifnet or the layer 2 common structure it was embedded in have
been replaced with a struct ifnet pointer to be filled by a call to the
new function, if_alloc(). The layer 2 common structure is also allocated
via if_alloc() based on the interface type. It is hung off the new
struct ifnet member, if_l2com.

This change removes the size of these structures from the kernel ABI and
will allow us to better manage them as interfaces come and go.

Other changes of note:
 - Struct arpcom is no longer referenced in normal interface code.
   Instead the Ethernet address is accessed via the IFP2ENADDR() macro.
   To enforce this ac_enaddr has been renamed to _ac_enaddr.
 - The second argument to ether_ifattach is now always the mac address
   from driver private storage rather than sometimes being ac_enaddr.

Reviewed by:	sobomax, sam
2005-06-10 16:49:24 +00:00
Yoshihiro Takahashi
d4fcf3cba5 Remove bus_{mem,p}io.h and related code for a micro-optimization on i386
and amd64.  The optimization is a trivial on recent machines.

Reviewed by:	-arch (imp, marcel, dfr)
2005-05-29 04:42:30 +00:00
Warner Losh
2ece8174c1 Use BUS_PROBE_DEFAULT in preference to 0. Also for vx, return
BUS_PROBE_LOW_PRIORITY in stead of ifdef for devices that xl and vx
both support so that xl will snarf them on up.
2005-03-01 07:50:12 +00:00
Warner Losh
098ca2bda9 Start each of the license/copyright comments with /*-, minor shuffle of lines 2005-01-06 01:43:34 +00:00
Robert Watson
095f2ac443 Since if_txp doesn't contain locking or run with INTR_MPSAFE, mark
the interface as IFF_NEEDSGIANT so if_start is run holding Giant.

Note: mutexes are initialized in the softc for this driver, but the
locking appears inadequate to allow Giant-free operation.
2004-08-13 23:53:36 +00:00
Warner Losh
794950069f Remove the setting of the pci config variables on power state changes.
The bus does this now.
2004-06-28 20:26:21 +00:00
Poul-Henning Kamp
fe12f24bb0 Add missing <sys/module.h> includes 2004-05-30 20:08:47 +00:00
Maxime Henrion
866a788cc2 We don't need to initialize if_output, ether_ifattach() does it
for us.
2004-05-23 16:11:53 +00:00
Nate Lawson
5f96beb9e0 Convert callers to the new bus_alloc_resource_any(9) API.
Submitted by:	Mark Santcroos <marks@ripe.net>
Reviewed by:	imp, dfr, bde
2004-03-17 17:50:55 +00:00
Matthew N. Dodd
e3bbbec2ca Announce ethernet MAC addresss in ether_ifattach(). 2004-03-14 07:12:25 +00:00
Brooks Davis
9bf40ede4a Replace the if_name and if_unit members of struct ifnet with new members
if_xname, if_dname, and if_dunit. if_xname is the name of the interface
and if_dname/unit are the driver name and instance.

This change paves the way for interface renaming and enhanced pseudo
device creation and configuration symantics.

Approved By:	re (in principle)
Reviewed By:	njl, imp
Tested On:	i386, amd64, sparc64
Obtained From:	NetBSD (if_xname)
2003-10-31 18:32:15 +00:00
David E. O'Brien
aad970f1fe Use __FBSDID().
Also some minor style cleanups.
2003-08-24 17:55:58 +00:00
Warner Losh
fa4b32fa80 All current uses of pci_set_powerstate are bogus, at least in theory.
However, they are presently necessary due to bigger bogusness in the
pci bus layer not doing the right thing on suspend/resume or on
initial device probe.  This is exactly the sort of thing that the
BURN_BRIDGES option was invented for.  Mark all of them as
BURN_BRIDGES.  As soon as I have the powerstate stuff properly
integrated into the pci bus code, I intend to remove all these
workarounds.
2003-07-03 14:00:57 +00:00