Commit Graph

111234 Commits

Author SHA1 Message Date
Alan Somers
b1a6b8dcd2 Improve the English in a comment
sys/cddl/contrib/opensolaris/uts/common/sys/acl.h:
	Improve the english in a comment.  No functional changes

Submitted by:	gibbs
MFC after:	4 weeks
Sponsored by:	Spectra Logic Corp
2016-06-01 22:21:42 +00:00
Gleb Smirnoff
a7c5163b5f When we are in panic, always go the asynchronous path in g_mirror_destroy(),
otherwise the system will hang.

This is a temporarily least intrusive crutch to get certain panicing systems
dumping. The proper fix should question is g_mirror_destroy() should be called
on a panicing system at all.

Discussed with:	mav
2016-06-01 22:11:54 +00:00
Konstantin Belousov
e5f0191f20 If the fast path unbusy in vm_page_replace() fails, slow path needs to
acquire the page lock, which recurses.  Avoid the recursion by reusing
the code from vm_page_remove() in a new helper
vm_page_xunbusy_maybelocked().

Reviewed by:	alc
Sponsored by:	The FreeBSD Foundation
2016-06-01 20:39:00 +00:00
Don Lewis
d673654796 Replace constant expressions that contain multiplications by
fractional floating point values with integer divides.  This will
eliminate any chance that the compiler will generate code to evaluate
the expression using floating point at runtime.

Suggested by:	bde
Submitted by:	Rasool Al-Saadi <ralsaadi@swin.edu.au>
MFC after:	8 days (with r300779 and r300949)
2016-06-01 20:04:24 +00:00
Navdeep Parhar
e6b775f48f iw_cxgbe: Fix panic that occurs when c4iw_ev_handler tries to acquire
comp_handler_lock but c4iw_destroy_cq has already freed the CQ memory
(which is where the lock resides).

Submitted by:	Krishnamraju Eraparaju @ Chelsio
Sponsored by:	Chelsio Communications
2016-06-01 18:46:54 +00:00
Mateusz Guzik
fc4f686d59 Microoptimize locking primitives by avoiding unnecessary atomic ops.
Inline version of primitives do an atomic op and if it fails they fallback to
actual primitives, which immediately retry the atomic op.

The obvious optimisation is to check if the lock is free and only then proceed
to do an atomic op.

Reviewed by:	jhb, vangyzen
2016-06-01 18:32:20 +00:00
Adrian Chadd
83e80fe84a [ath_hal] add azimuth timestamp payload marking for AR9380 and later chips. 2016-06-01 15:56:07 +00:00
Andriy Voskoboinyk
fb9af2ebe6 urtwn: unbreak CTS-to-self protection mode.
Do not set HWRTSEN bit when CTS-to-self is used; CTS2SELF bit triggers
CTS frame transmission by itself (and it does not work when HWRTSEN bit
is set).

Tested with:
 * RTL8188CUS, HOSTAP mode (11g)
 * RTL8188EU, STA mode (11g)
2016-06-01 15:47:19 +00:00
Bryan Drewery
24862f2287 Enable filemon on all architectures.
MFC after:	2 weeks
Sponsored by:	EMC / Isilon Storage Division
2016-06-01 15:19:49 +00:00
Andriy Voskoboinyk
55eb77a20a urtwn: fix non-ERP BSS detection in HOSTAP mode.
Receive all beacons in HOSTAP mode; they will give more information about
present non-ERP / legacy BSSs (used to choose protection mode).

Tested with RTL8188CUS (HOSTAP, urtwn) + RTL8821AU (HOSTAP, 11b mode).
2016-06-01 14:57:53 +00:00
Andrew Rybchenko
6bf4498cbc sfxge(4): cleanup: remove unused variables in common code
Submitted by:   Andy Moreton <amoreton at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
MFC after:      1 week
2016-06-01 14:16:16 +00:00
Ruslan Bukin
99ea4d4733 Add support for loadable kernel modules.
Submitted by:	Yukishige Shibata <y-shibat@mtd.biglobe.ne.jp>
2016-06-01 14:12:31 +00:00
Andrew Rybchenko
e6023d7095 sfxge(4): cleanup: add missing space after if keyword
Sponsored by:   Solarflare Communications, Inc.
MFC after:      1 week
2016-06-01 14:11:40 +00:00
Ruslan Bukin
8dbd4f302f Build riscv modules as PIC.
Submitted by:	Yukishige Shibata <y-shibat@mtd.biglobe.ne.jp>
2016-06-01 14:05:32 +00:00
Ruslan Bukin
b217eb9314 Add a riscv define.
Submitted by:	Yukishige Shibata <y-shibat@mtd.biglobe.ne.jp>
2016-06-01 14:03:13 +00:00
Andrew Rybchenko
5c4c3d9285 sfxge(4): set moderation in efx_ev_qcreate
This simplifies setting an initial interrupt moderation value, and
avoids most calls to evx_ev_qmoderate from contexts where MCDI is
not allowed (MCDI is need for an EVQ timer workaround in a later patch).

Submitted by:   Andy Moreton <amoreton at solarflare.com>
Reviewed by:    gnn
Sponsored by:   Solarflare Communications, Inc.
MFC after:      1 week
Differential Revision:  https://reviews.freebsd.org/D6673
2016-06-01 14:03:07 +00:00
Ruslan Bukin
87ef40645d Don't build some modules on RISC-V.
Submitted by:	Yukishige Shibata <y-shibat@mtd.biglobe.ne.jp>
2016-06-01 13:43:43 +00:00
Ruslan Bukin
22d5f3540a * Enable KDTRACE options as we support DTrace now.
* Add bpf device to kernel config.
2016-06-01 12:19:00 +00:00
Edward Tomasz Napierala
ac3453eba0 Reduce the priority of cxgbei(4) driver, so it doesn't get chosen
by default.  This is a workaround for a too simplistic ICL module
choosing mechanism.  To use it, specify offload in ctl.conf
or iscsi.conf.

This fixes a problem where "kldload cxgbei" wedges the iSCSI stack,
if you don't have a Chelsio card installed, or the endpoints of the
iSCSI session are not reachable through addresses configured
on that interface.

Reviewed by:	np@
MFC after:	1 month
2016-06-01 12:04:04 +00:00
Bjoern A. Zeeb
3f58662dd9 The pr_destroy field does not allow us to run the teardown code in a
specific order.  VNET_SYSUNINITs however are doing exactly that.
Thus remove the VIMAGE conditional field from the domain(9) protosw
structure and replace it with VNET_SYSUNINITs.
This also allows us to change some order and to make the teardown functions
file local static.
Also convert divert(4) as it uses the same mechanism ip(4) and ip6(4) use
internally.

Slightly reshuffle the SI_SUB_* fields in kernel.h and add a new ones, e.g.,
for pfil consumers (firewalls), partially for this commit and for others
to come.

Reviewed by:		gnn, tuexen (sctp), jhb (kernel.h)
Obtained from:		projects/vnet
MFC after:		2 weeks
X-MFC:			do not remove pr_destroy
Sponsored by:		The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D6652
2016-06-01 10:14:04 +00:00
Sepherosa Ziehau
b7bb4816a0 hyperv: Rename some cleaned up/almost cleaned up files
MFC after:	1 week
Sponsored by:	Microsoft OSTC
2016-06-01 09:20:52 +00:00
Zbigniew Bodek
32fb8300d4 Return real error value instead of hard-coded ENXIO (fix after r300149)
It is possible to return real error value in case of gic_v3_attach()
failure instead of hard-coded ENXIO.

Obtained from:	Semihalf
Sponsored by:	Cavium
2016-06-01 08:20:10 +00:00
Ed Schouten
5218e61a60 Define the id_t type as required by POSIX.
It seems that all versions of POSIX that I could find require that
<sys/resource.h> defines id_t. Define it together with rlim_t. While
there, move these typedefs closer to the top of the header file, right
after the includes, which we do in most other header files.
2016-06-01 07:45:03 +00:00
Sepherosa Ziehau
5d8fdc7fe4 hyperv/channel: Only cpu0 is supported as channel target cpu on WIN7
MFC after:	1 week
Sponsored by:	Microsoft OSTC
2016-06-01 07:11:54 +00:00
Sepherosa Ziehau
417afb00cb hyperv/vmbus: Redefine event flags.
- Nuke unnecessary union.
- Avoid convoluted macro indirection.

MFC after:	1 week
Sponsored by:	Microsoft OSTC
Differential Revision:	https://reviews.freebsd.org/D6671
2016-06-01 06:51:44 +00:00
Andrew Rybchenko
84bcd65e0f sfxge(4): cope with code duplication on SW events composition
Sponsored by:   Solarflare Communications, Inc.
MFC after:      2 days
Differential Revision:  https://reviews.freebsd.org/D6666
2016-06-01 06:51:19 +00:00
Sepherosa Ziehau
1ca32af8f2 bge: Force chipid to 5720 A0 for 5717 C0 in an early place
Discussed with:	yongari
MFC after:	1 week
Sponsored by:	Microsoft OSTC
2016-06-01 05:15:11 +00:00
Adrian Chadd
8e0feaeafa [ath_hal] implement shared PA handling checks, based on ath9k.
These are apparently conditional on there being a shared PA/LNA, which
at least on AR9462/QCA9535 devices I have isn't a thing.

I'm .. not yet sure which devices it /is/ a thing, so I'll come back
to that.

Tested:

* QCA9565 STA + bluetooth

Obtained from:	Linux ath9k
2016-06-01 03:49:22 +00:00
Adrian Chadd
193232716d [ath_hal] add MCI bits from ath9k for QCA9565
* Add extra debugging - the weights debugging is really useful to ensure
  things are programmed into the wlan coexistence table.  The weights are
  what traffic priority each of the various modes get (tx, tx-high-priority,
  rx-beacon, etc) if they're all zero, things work very poorly.

* Add in coex init routines from ath9k for AR9462 and QCA9565 1ANT and 2ANT.
  This control things like beacon stomping, ACK handling, antennas, PA/LNA
  shared, etc.

* Some ancillary bits.

TODO:

* There's some conditional stuff around MCI_ANT_ARCH_PA_LNA_SHARED() in ath9k
  which doesn't always enable force-on LNA.  That'll have to be examined
  and merged in as appropriate.

Obtained from:	linux ath9k
2016-06-01 03:27:33 +00:00
Adrian Chadd
3091d36445 [ath_hal] add support for QCA9565 for configuring the bluetooth antenna LNA diversity.
Notably, this also sets AR_BTCOEX_WL_LNADIV to FORCE_ON, so LNA diversity
is always enabled and under control of the wifi chip.

Tested:

* QCA9565, STA + bluetooth mode

Obtained from:	Linux ath9k
2016-06-01 03:24:53 +00:00
Adrian Chadd
b8a74db325 [ath_hal] Allow the BT antenna diversity option to be enabled for QCA9565.
Obtained from:	Linux ath9k
2016-06-01 03:21:23 +00:00
Adrian Chadd
eb800a94c3 [ath_hal] add QCA9565 bluteooth antenna control.
This configures the LNA antenna diversity control, which should be on
if wlan owns the LNA for bluetooth coexistence.  Otherwise, make sure
it's off.

I think this is eventually intended to allow 1-antenna bluetooth +
wifi setups for QCA9565, but I'm not sure where that's actually configured
in ath9k.

Obtained from:	Linux ath9k
2016-06-01 03:20:55 +00:00
Adrian Chadd
ab3b48eaa2 [ath_hal] add extra debugging for MCI interrupts. 2016-06-01 03:17:36 +00:00
Adrian Chadd
bd02d46fc2 [ath_hal] add extra MCI definitions used by the later chips (QCA9565/Aphrodite).
Obtained from:	Linux ath9k
2016-06-01 01:43:46 +00:00
Bryan Drewery
292c5292b6 WITH_META_MDE: Fix machine/include and x86/include issues.
- Fixes 'ln: File exists' errors.
- Fixes creating include directories in the source directory as well.

Sponsored by:	EMC / Isilon Storage Division
2016-05-31 23:40:21 +00:00
Bryan Drewery
5d4447e0b7 Define SYSDIR earlier since the defined(FIRMWS) block depends on it.
It uses it in a dependency, which won't work if it is not yet defined.

Sponsored by:	EMC / Isilon Storage Division
2016-05-31 23:14:15 +00:00
Bryan Drewery
6633bb8f7b Add missed updates for r301079 and r301084. 2016-05-31 23:12:43 +00:00
Bryan Drewery
2dcffa9cb7 WITH_META_MODE: Resolve SYSDIR to avoid changed build commands.
Sponsored by:	EMC / Isilon Storage Division
2016-05-31 23:08:43 +00:00
Jared McNeill
b8f34c287a Fix a crash while iterating compat strings when no match is found.
Spotted by:	ian
2016-05-31 21:58:09 +00:00
Ed Schouten
ee7e05ea0f Make RLIM_INFINITY usable without including <stdint.h>.
By using __uint64_t instead of uint64_t, this constant can also be used
if <sys/resource.h> is included on its own.
2016-05-31 21:34:02 +00:00
Bryan Drewery
28849c57d6 WITH_META_MODE: Mitigate switching from without to with META_MODE.
Adding .META to targets-to-build will ensure that they will rebuild if there
is no .meta file.

Adding it to all SUFFIXES and objects ensures that at least objects will
rebuild if there is no .meta file.

This will be reverted if bmake's behavior changes to rebuild on missing .meta
files.

Sponsored by:	EMC / Isilon Storage Division
2016-05-31 21:22:19 +00:00
Andrew Rybchenko
e1399ed7a2 sfxge(4): avoid code duplication in SW events definition
Reviewed by:    gnn
Sponsored by:   Solarflare Communications, Inc.
MFC after:      2 days
Differential Revision:  https://reviews.freebsd.org/D6662
2016-05-31 20:54:42 +00:00
Ed Schouten
0d7ed8fe5f Add missing dependency on <machine/param.h>.
The SHMLBA definition provided by this header file is defined as
PAGE_SIZE. PAGE_SIZE is only available when <machine/param.h> is
included.
2016-05-31 19:24:32 +00:00
Andrew Turner
e8b65b836b Attach the generic USB OHCI driver to the arm64 build.
Obtained from:	ABT Systems Ltd
Sponsored by:	The FreeBSD Foundation
2016-05-31 19:19:21 +00:00
Andrew Turner
920c8a57c0 dpcpu_init should have also passed in the calculated cpuid, not the
devicetree ID.

Obtained from:	ABT Systems Ltd
Sponsored by:	The FreeBSD Foundation
2016-05-31 19:17:32 +00:00
Ed Schouten
08c8d10cf3 Improve POSIX conformance of <signal.h>.
- This header file has always depended on pthread_t, pthread_attr_t,
  struct timespec, size_t and uid_t. Only as of POSIX 2008, these
  dependencies have been states explicitly. They should now be defined.

- In our implementation, struct sigevent::sigev_notify_attributes has
  type "void *" instead of "pthread_attr_t *". My guess is that this was
  done to prevent pulling in the pthread types, but this can easily be
  avoided by using the underlying structure types.
2016-05-31 19:05:41 +00:00
Andrew Turner
e0db04b3de Allow the kernel to boot on a CPU where the devicetree has numbered it with
a non-zero ID. To do this we increment the cpuid of any CPUs with a smaller
devicetree ID by one to stop them conflicting with the boot CPU.

Obtained from:	ABT Systems Ltd
Sponsored by:	The FreeBSD Foundation
2016-05-31 18:45:52 +00:00
Andrew Rybchenko
9885e222ea sfxge(4): move definition of the SW events to sfxge.h
Tx flush done event is defined and Rx-specific header is not a good
place for it.

Sponsored by:   Solarflare Communications, Inc.
MFC after:      2 days
2016-05-31 18:34:39 +00:00
Andrew Rybchenko
7d52b4a8a1 sfxge(4): zero should be used as RxQ label in SW event
The buggy code was using the rxq index but should use the evq label
associated with the rxq. It was missed in r298735.

Reviewed by:    gnn
Sponsored by:   Solarflare Communications, Inc.
MFC after:      2 days
Differential Revision:  https://reviews.freebsd.org/D6661
2016-05-31 18:31:17 +00:00
Andrew Turner
02a1932d1c arm_gic_map is a mask not the CPUs ID, there is no need to shift it.
Pointy-hat to:	andrew
Obtained from:	ABT Systems Ltd
Sponsored by:	The FreeBSD Foundation
2016-05-31 18:05:17 +00:00