Commit Graph

2078 Commits

Author SHA1 Message Date
John Baldwin
5abf821641 Update this driver to not save copies of registers that are no longer used
after r281874.  While here, also update it to always write the parent's
PCI bus number to the primary bus register.
2015-04-24 13:12:04 +00:00
Andrew Turner
405ada37fb Add support for the uart classes to set their default register shift value.
This is needed with the pl011 driver. Before this change it would default
to a shift of 0, however the hardware places the registers at 4-byte
addresses meaning the value should be 2.

This patch fixes this for the pl011 when configured using the fdt. The
other drivers have a default value of 0 to keep this a no-op.

MFC after:	1 week
2015-04-11 17:16:23 +00:00
John Baldwin
dbee5c671a Move the 32-bit compatible procfs types from freebsd32.h to <sys/procfs.h>
and export them to userland.
- Define __HAVE_REG32 on platforms that define a reg32 structure and check
  for this in <sys/procfs.h> to control when to export prstatus32, etc.
- Add prstatus32_t and prpsinfo32_t typedefs for the 32-bit structures.
  libbfd looks for these types, and having them fixes 'gcore' in gdb of a
  32-bit process on a 64-bit platform.
- Use the structure definitions from <sys/procfs.h> in gcore's elf32 core
  dump code instead of duplicating the definitions.

Differential Revision:	https://reviews.freebsd.org/D2142
Reviewed by:	kib, nathanw (powerpc bits)
MFC after:	1 week
2015-04-08 16:30:45 +00:00
Ryan Stone
f2c2231e0c Fix integer truncation bug in malloc(9)
A couple of internal functions used by malloc(9) and uma truncated
a size_t down to an int.  This could cause any number of issues
(e.g. indefinite sleeps, memory corruption) if any kernel
subsystem tried to allocate 2GB or more through malloc.  zfs would
attempt such an allocation when run on a system with 2TB or more
of RAM.

Note to self: When this is MFCed, sparc64 needs the same fix.

Differential revision:	https://reviews.freebsd.org/D2106
Reviewed by:	kib
Reported by:	Michael Fuckner <michael@fuckner.net>
Tested by:	Michael Fuckner <michael@fuckner.net>
MFC after:	2 weeks
2015-04-01 12:42:26 +00:00
John Baldwin
86750039c6 Apply r276208 to non-amd64 NOTES files as well to fix tinderbox builds
run under a system using vt(4) instead of syscons(4):

Use compiled in default keymaps which are available both in syscons and vt.
2015-03-25 15:51:41 +00:00
Marius Strobl
aed116911d Unbreak sparc64 after r276630 by calling __sparc_sigtramp_setup signal
trampoline as part of the MD __sys_sigaction again.

Submitted by:	kib (initial versions)
MFC after:	3 days
2015-02-16 22:13:03 +00:00
Konstantin Belousov
206f09eb46 Do not qualify the mcontext_t *mcp argument for set_mcontext(9) as
const.  On x86, even after the machine context is supposedly read into
the struct ucontext, lazy FPU state save code might only mark the FPU
data as hardware-owned.  Later, set_fpcontext() needs to fetch the
state from hardware, modifying the *mcp.

The set_mcontext(9) is called from sigreturn(2) and setcontext(2)
implementations and old create_thread(2) interface, which throw the
*mcp out after the set_mcontext() call.

Reported by:	dim
Discussed with:	jhb
Sponsored by:	The FreeBSD Foundation
MFC after:	1 week
2015-01-31 21:43:46 +00:00
Konstantin Belousov
8f4548ff25 Remove Giant from /dev/mem and /dev/kmem. It is definitely not needed
for i386, and from the code inspection, nothing in the
arm/mips/sparc64 implementations depends on it.

Discussed with:	imp, nwhitehorn
Sponsored by:	The FreeBSD Foundation
MFC after:	3 weeks
2015-01-24 12:51:15 +00:00
Mark Johnston
bdb9ab0dd9 Factor out duplicated code from dumpsys() on each architecture into generic
code in sys/kern/kern_dump.c. Most dumpsys() implementations are nearly
identical and simply redefine a number of constants and helper subroutines;
a generic implementation will make it easier to implement features around
kernel core dumps. This change does not alter any minidump code and should
have no functional impact.

PR:		193873
Differential Revision:	https://reviews.freebsd.org/D904
Submitted by:	Conrad Meyer <conrad.meyer@isilon.com>
Reviewed by:	jhibbits (earlier version)
Sponsored by:	EMC / Isilon Storage Division
2015-01-07 01:01:39 +00:00
John Baldwin
3e32dff52c Remove "New" label from NFSCL/NFSD now that they are the only NFS
client/server.  While here, remove duplicate NFSCL from sys/conf/NOTES.

Approved by:	rmacklem
2015-01-06 16:15:57 +00:00
George V. Neville-Neil
bd19924f6b This configuration file removes several debugging options, including
WITNESS and INVARIANTS checking, which are known to have significant
performance impact on running systems.  When benchmarking new features
this kernel should be used instead of the standard GENERIC.
This kernel configuration should never appear outside of the HEAD
of the FreeBSD tree.
2014-12-02 19:55:43 +00:00
Ed Maste
294246bb7d Revert r274772: it is not valid on MIPS
Reported by:	sbruno
2014-11-25 03:50:31 +00:00
Ed Maste
688fd61ae8 Use canonical __PIC__ flag
It is automatically set when -fPIC is passed to the compiler.

Reviewed by:	dim, kib
Sponsored by:	The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D1179
2014-11-21 02:05:48 +00:00
Alexander V. Chernikov
603eaf792b Renove faith(4) and faithd(8) from base. It looks like industry
have chosen different (and more traditional) stateless/statuful
NAT64 as translation mechanism. Last non-trivial commits to both
faith(4) and faithd(8) happened more than 12 years ago, so I assume
it is time to drop RFC3142 in FreeBSD.

No objections from:	net@
2014-11-09 21:33:01 +00:00
Konstantin Belousov
4f3dc90023 Add fueword(9) and casueword(9) functions. They are like fuword(9)
and casuword(9), but do not mix value read and indication of fault.

I know (or remember) enough assembly to handle x86 and powerpc.  For
arm, mips and sparc64, implement fueword() and casueword() as wrappers
around fuword() and casuword(), which means that the functions cannot
distinguish between -1 and fault.

On architectures where fueword() and casueword() are native, implement
fuword() and casuword() using fueword() and casuword(), to reduce
assembly code duplication.

Sponsored by:	The FreeBSD Foundation
Tested by:	pho
MFC after:	2 weeks (ia64 needs treating)
2014-10-28 15:22:13 +00:00
Alan Cox
b17af71943 Simplify memrw().
MFC after:	10 days
2014-10-27 01:10:40 +00:00
John Baldwin
7d313e7bdb Add COMPAT_FREEBSD9 and COMPAT_FREEBSD10 options to wrap code that
provides compatability for FreeBSD 9.x and 10.x binaries.  Enable
these options in kernel configs that enable other COMPAT_FREEBSD<n>
options.
2014-10-24 19:58:24 +00:00
Davide Italiano
2be111bf7d Follow up to r225617. In order to maximize the re-usability of kernel code
in userland rename in-kernel getenv()/setenv() to kern_setenv()/kern_getenv().
This fixes a namespace collision with libc symbols.

Submitted by:   kmacy
Tested by:      make universe
2014-10-16 18:04:43 +00:00
Baptiste Daroussin
dbacd66928 Fix typo revealed by using newer binutils
Differential Revision:	https://reviews.freebsd.org/D933
Reviewed by:	marius
2014-10-10 14:18:33 +00:00
Roger Pau Monné
c98a2727cc ddb: allow specifying the exact address of the symtab and strtab
When the FreeBSD kernel is loaded from Xen the symtab and strtab are
not loaded the same way as the native boot loader. This patch adds
three new global variables to ddb that can be used to specify the
exact position and size of those tables, so they can be directly used
as parameters to db_add_symbol_table. A new helper is introduced, so callers
that used to set ksym_start and ksym_end can use this helper to set the new
variables.

It also adds support for loading them from the Xen PVH port, that was
previously missing those tables.

Sponsored by: Citrix Systems R&D
Reviewed by:	kib

ddb/db_main.c:
 - Add three new global variables: ksymtab, kstrtab, ksymtab_size that
   can be used to specify the position and size of the symtab and
   strtab.
 - Use those new variables in db_init in order to call db_add_symbol_table.
 - Move the logic in db_init to db_fetch_symtab in order to set ksymtab,
   kstrtab, ksymtab_size from ksym_start and ksym_end.

ddb/ddb.h:
 - Add prototype for db_fetch_ksymtab.
 - Declate the extern variables ksymtab, kstrtab and ksymtab_size.

x86/xen/pv.c:
 - Add support for finding the symtab and strtab when booted as a Xen
   PVH guest. Since Xen loads the symtab and strtab as NetBSD expects
   to find them we have to adapt and use the same method.

amd64/amd64/machdep.c:
arm/arm/machdep.c:
i386/i386/machdep.c:
mips/mips/machdep.c:
pc98/pc98/machdep.c:
powerpc/aim/machdep.c:
powerpc/booke/machdep.c:
sparc64/sparc64/machdep.c:
 - Use the newly introduced db_fetch_ksymtab in order to set ksymtab,
   kstrtab and ksymtab_size.
2014-09-25 08:28:10 +00:00
John Baldwin
1f895058e4 Revert unrelated changes accidentally committed in r271192. 2014-09-17 18:55:39 +00:00
Adrian Chadd
066da8050b Migrate ie->ie_assign_cpu and associated code to use an int for CPU rather
than u_char.

Migrate post_filter to use an int for a CPU rather than u_char.

Change intr_event_bind() to use an int for CPU rather than u_char.

It touches the ppc, sparc64, arm and mips machdep code but it should
(hah!) be a no-op.

Tested:

* i386, AMD64 laptops

Reviewed by:	jhb
2014-09-17 17:33:22 +00:00
John Baldwin
b1d735ba4c Create a separate structure for per-CPU state saved across suspend and
resume that is a superset of a pcb.  Move the FPU state out of the pcb and
into this new structure.  As part of this, move the FPU resume code on
amd64 into a C function.  This allows resumectx() to still operate only on
a pcb and more closely mirrors the i386 code.

Reviewed by:	kib (earlier version)
2014-09-06 15:23:28 +00:00
Konstantin Belousov
8158a32900 For CPUs which do hardware cache line unaliasing, use direct map to
access sfbufs.

Suggested and reviewed by:	alc
Tested by:	Michael Moll <kvedulv@kvedulv.de>
Sponsored by:	The FreeBSD Foundation
2014-08-23 18:11:54 +00:00
Konstantin Belousov
5e1d15a879 Complete r254667, do not destroy pmap lock if KVA allocation failed.
Submitted by:	Svatopluk Kraus <onwahe@gmail.com>
MFC after:	1 week
2014-08-16 08:31:25 +00:00
Konstantin Belousov
bb0a8f248d On sparc64, do not keep mappings for the destroyed sf_bufs. Sparc64
pmap, unlike i386, and similar to i386/xen pv, does not tolerate
abandoned mappings for the freed pages.

Reported and tested by:	dumbbell
Diagnosed and reviewed by:	alc
Sponsored by:	The FreeBSD Foundation
2014-08-10 16:59:39 +00:00
Konstantin Belousov
39ffa8c138 Change pmap_enter(9) interface to take flags parameter and superpage
mapping size (currently unused).  The flags includes the fault access
bits, wired flag as PMAP_ENTER_WIRED, and a new flag
PMAP_ENTER_NOSLEEP to indicate that pmap should not sleep.

For powerpc aim both 32 and 64 bit, fix implementation to ensure that
the requested mapping is created when PMAP_ENTER_NOSLEEP is not
specified, in particular, wait for the available memory required to
proceed.

In collaboration with:	alc
Tested by:	nwhitehorn (ppc aim32 and booke)
Sponsored by:	The FreeBSD Foundation and EMC / Isilon Storage Division
MFC after:	2 weeks
2014-08-08 17:12:03 +00:00
Gleb Smirnoff
c8d2ffd6a7 Merge all MD sf_buf allocators into one MI, residing in kern/subr_sfbuf.c
The MD allocators were very common, however there were some minor
differencies. These differencies were all consolidated in the MI allocator,
under ifdefs. The defines from machine/vmparam.h turn on features required
for a particular machine. For details look in the comment in sys/sf_buf.h.

As result no MD code left in sys/*/*/vm_machdep.c. Some arches still have
machine/sf_buf.h, which is usually quite small.

Tested by:	glebius (i386), tuexen (arm32), kevlo (arm32)
Reviewed by:	kib
Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2014-08-05 09:44:10 +00:00
Alan Cox
a695d9b25b Retire pmap_change_wiring(). We have never used it to wire virtual pages.
We continue to use pmap_enter() for that.  For unwiring virtual pages, we
now use pmap_unwire(), which unwires a range of virtual addresses instead
of a single virtual page.

Sponsored by:	EMC / Isilon Storage Division
2014-08-03 20:40:51 +00:00
Nathan Whitehorn
190d685037 Add vt(4) support to sparc64. The only driver currently present (ofwfb)
provides support for a variety of low-end graphics hardware (SBus adapters,
Mach64, QEMU's framebuffer, XVR-100). A driver for at least the Creator3D
cards will have to be present before this can become the default console
driver.

To test vt(4) on sparc64, set kern.vty=vt at the loader prompt.
2014-08-02 03:48:16 +00:00
Gavin Atkinson
f6b4f5ca21 Add error return to dumpsys(), and use it in doadump().
This commit does not add error returns to minidumpsys() or
textdump_dumpsys(); those can also be added later.

Submitted by:	Conrad Meyer (EMC / Isilon storage division)
2014-07-25 23:52:53 +00:00
Alan Cox
09132ba6ac Introduce pmap_unwire(). It will replace pmap_change_wiring(). There are
several reasons for this change:

pmap_change_wiring() has never (in my memory) been used to set the wired
attribute on a virtual page.  We have always used pmap_enter() to do that.
Moreover, it is not really safe to use pmap_change_wiring() to set the wired
attribute on a virtual page.  The description of pmap_change_wiring() says
that it assumes the existence of a mapping in the pmap.  However, non-wired
mappings may be reclaimed by the pmap at any time.  (See pmap_collect().)
Many implementations of pmap_change_wiring() will crash if the mapping does
not exist.

pmap_unwire() accepts a range of virtual addresses, whereas
pmap_change_wiring() acts upon a single virtual page.  Since we are
typically unwiring a range of virtual addresses, pmap_unwire() will be more
efficient.  Moreover, pmap_unwire() allows us to unwire superpage mappings.
Previously, we were forced to demote the superpage mapping, because
pmap_change_wiring() only allowed us to express the unwiring of a single
base page mapping at a time.  This added to the overhead of unwiring for
large ranges of addresses, including the implicit unwiring that occurs at
process termination.

Implementations for arm and powerpc will follow.

Discussed with:	jeff, marcel
Reviewed by:	kib
Sponsored by:	EMC / Isilon Storage Division
2014-07-06 17:42:38 +00:00
Hans Petter Selasky
af3b2549c4 Pull in r267961 and r267973 again. Fix for issues reported will follow. 2014-06-28 03:56:17 +00:00
Glen Barber
37a107a407 Revert r267961, r267973:
These changes prevent sysctl(8) from returning proper output,
such as:

 1) no output from sysctl(8)
 2) erroneously returning ENOMEM with tools like truss(1)
    or uname(1)
 truss: can not get etype: Cannot allocate memory
2014-06-27 22:05:21 +00:00
Hans Petter Selasky
3da1cf1e88 Extend the meaning of the CTLFLAG_TUN flag to automatically check if
there is an environment variable which shall initialize the SYSCTL
during early boot. This works for all SYSCTL types both statically and
dynamically created ones, except for the SYSCTL NODE type and SYSCTLs
which belong to VNETs. A new flag, CTLFLAG_NOFETCH, has been added to
be used in the case a tunable sysctl has a custom initialisation
function allowing the sysctl to still be marked as a tunable. The
kernel SYSCTL API is mostly the same, with a few exceptions for some
special operations like iterating childrens of a static/extern SYSCTL
node. This operation should probably be made into a factored out
common macro, hence some device drivers use this. The reason for
changing the SYSCTL API was the need for a SYSCTL parent OID pointer
and not only the SYSCTL parent OID list pointer in order to quickly
generate the sysctl path. The motivation behind this patch is to avoid
parameter loading cludges inside the OFED driver subsystem. Instead of
adding special code to the OFED driver subsystem to post-load tunables
into dynamically created sysctls, we generalize this in the kernel.

Other changes:
- Corrected a possibly incorrect sysctl name from "hw.cbb.intr_mask"
to "hw.pcic.intr_mask".
- Removed redundant TUNABLE statements throughout the kernel.
- Some minor code rewrites in connection to removing not needed
TUNABLE statements.
- Added a missing SYSCTL_DECL().
- Wrapped two very long lines.
- Avoid malloc()/free() inside sysctl string handling, in case it is
called to initialize a sysctl from a tunable, hence malloc()/free() is
not ready when sysctls from the sysctl dataset are registered.
- Bumped FreeBSD version to indicate SYSCTL API change.

MFC after:	2 weeks
Sponsored by:	Mellanox Technologies
2014-06-27 16:33:43 +00:00
Warner Losh
3f1afabf09 Restore comments accidentally removed.
MFC after: 3 days
2014-06-06 04:08:55 +00:00
Kenneth D. Merry
991554f2c4 Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers.
This is derived from the mps(4) driver, but it supports only the 12Gb
IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108.

Some notes about this driver:
 o The 12Gb hardware can do "FastPath" I/O, and that capability is included in
   this driver.

 o WarpDrive functionality has been removed, since it isn't supported in
   the 12Gb driver interface.

 o The Scatter/Gather list handling code is significantly different between
   the 6Gb and 12Gb hardware.  The 12Gb boards support IEEE Scatter/Gather
   lists.

Thanks to LSI for developing and testing this driver for FreeBSD.

share/man/man4/mpr.4:
	mpr(4) man page.

sys/dev/mpr/*:
	mpr(4) driver files.

sys/modules/Makefile,
sys/modules/mpr/Makefile:
	Add a module Makefile for the mpr(4) driver.

sys/conf/files:
	Add the mpr(4) driver.

sys/amd64/conf/GENERIC,
sys/i386/conf/GENERIC,
sys/mips/conf/OCTEON1,
sys/sparc64/conf/GENERIC:
	Add the mpr(4) driver to all config files that currently
	have the mps(4) driver.

sys/ia64/conf/GENERIC:
	Add the mps(4) and mpr(4) drivers to the ia64 GENERIC
	config file.

sys/i386/conf/XEN:
	Exclude the mpr module from building here.

Submitted by:	Steve McConnell <Stephen.McConnell@lsi.com>
MFC after:	3 days
Tested by:	Chris Reeves <chrisr@spectralogic.com>
Sponsored by:	LSI, Spectra Logic
Relnotes:	LSI 12Gb SAS driver mpr(4) added
2014-05-02 20:25:09 +00:00
Scott Long
60ad8150c7 Retire smp_active. It was racey and caused demonstrated problems with
the cpufreq code.  Replace its use with smp_started.  There's at least
one userland tool that still looks at the kern.smp.active sysctl, so
preserve it but point it to smp_started as well.

Discussed with: peter, jhb
MFC after: 3 days
Obtained from: Netflix
2014-04-26 20:27:54 +00:00
Tijl Coosemans
0a4c54d606 Rename __wchar_t so it no longer conflicts with __wchar_t from clang 3.4
-fms-extensions.

MFC after:	2 weeks
2014-04-01 14:46:11 +00:00
Warner Losh
3ad1a09169 Rather than require a makeoptions DEBUG to get debug correct,
add it in kern.mk, but only if we're using clang. While this
option is supported by both clang and gcc, in the future there
may be changes to clang which change the defaults that require
a tweak to build our kernel such that other tools in our tree
will work. Set a good example by forcing -gdwarf-2 only for
clang builds, and only if the user hasn't specified another
dwarf level already. Update UPDATING to reflect the changed
state of affairs. This also keeps us from having to update
all the ARM kernels to add this, and also keeps us from
in the future having to update all the MIPS kernels and is
one less place the user will have to know to do something
special for clang and one less thing developers will need
to do when moving an architecture to clang.

Reviewed by:	ian@
MFC after:	1 week
2014-03-25 22:08:31 +00:00
Bryan Drewery
44f1c91610 Rename global cnt to vm_cnt to avoid shadowing.
To reduce the diff struct pcu.cnt field was not renamed, so
PCPU_OP(cnt.field) is still used. pc_cnt and pcpu are also used in
kvm(3) and vmstat(8). The goal was to not affect externally used KPI.

Bump __FreeBSD_version_ in case some out-of-tree module/code relies on the
the global cnt variable.

Exp-run revealed no ports using it directly.

No objection from:	arch@
Sponsored by:	EMC / Isilon Storage Division
2014-03-22 10:26:09 +00:00
Robert Watson
4a14441044 Update kernel inclusions of capability.h to use capsicum.h instead; some
further refinement is required as some device drivers intended to be
portable over FreeBSD versions rely on __FreeBSD_version to decide whether
to include capability.h.

MFC after:	3 weeks
2014-03-16 10:55:57 +00:00
Warner Losh
22b8ff24b5 Delete stray clause 3 (Advertising clause) and renumber while i'm
here.

Approved by: alc@
2014-03-11 23:41:35 +00:00
Dimitry Andric
c3bb517174 Merge from head up to r262472. 2014-02-25 07:40:37 +00:00
Dimitry Andric
362a42b214 Make sure a for loop in fire_alloc_msix() terminates, by making the loop
counter signed.

Reviewed by:	marius
MFC after:	3 days
2014-02-25 07:33:28 +00:00
Dimitry Andric
ad3d02dd2a In sys/sparc64/sparc64/spitfire.c, prevent signed shift overflow by
casting to the appropriate type.  (Note this fix cannot be done in
sys/sparc64/sparc64/spitfire.c, since that file is also included by
assembly source files.)

Reviewed by:	marius
MFC after:	3 days
2014-02-25 07:28:51 +00:00
Dimitry Andric
defb3353ee Similar to r261991, for compiling the GENERIC kernel on sparc64,
explicitly use -gdwarf-2 for the debug symbols.
2014-02-23 19:18:04 +00:00
Dimitry Andric
2994da7d3c Remove more superfluous const specifiers. 2014-02-23 18:36:45 +00:00
John Baldwin
4edef187b8 Add support for managing PCI bus numbers. As with BARs and PCI-PCI bridge
I/O windows, the default is to preserve the firmware-assigned resources.
PCI bus numbers are only managed if NEW_PCIB is enabled and the architecture
defines a PCI_RES_BUS resource type.
- Add a helper API to create top-level PCI bus resource managers for each
  PCI domain/segment.  Host-PCI bridge drivers use this API to allocate
  bus numbers from their associated domain.
- Change the PCI bus and CardBus drivers to allocate a bus resource for
  their bus number from the parent PCI bridge device.
- Change the PCI-PCI and PCI-CardBus bridge drivers to allocate the
  full range of bus numbers from secbus to subbus from their parent bridge.
  The drivers also always program their primary bus register.  The bridge
  drivers also support growing their bus range by extending the bus resource
  and updating subbus to match the larger range.
- Add support for managing PCI bus resources to the Host-PCI bridge drivers
  used for amd64 and i386 (acpi_pcib, mptable_pcib, legacy_pcib, and qpi_pcib).
- Define a PCI_RES_BUS resource type for amd64 and i386.

Reviewed by:	imp
MFC after:	1 month
2014-02-12 04:30:37 +00:00
Nathan Whitehorn
95e3bfe889 Simplify the ofw_bus_lookup_imap() API slightly: make it allocate maskbuf
internally instead of requiring the caller to allocate it.
2013-12-17 15:11:24 +00:00