kill a process, when the system runs out of memory. Defaults to off.
Usually, this is most useful when the OOM condition is due to mismanagement
of memory, on a system where the applications in question don't respond well
to being killed.
In theory, if the system is properly managed, it shouldn't be possible to
hit this condition. If it does, the panic can be more desirable for some
users (since it can be a good means of finding the root cause) rather than
killing the largest process and continuing on its merry way.
As kib@ mentions in the differential, there is also protect(1), which uses
procctl(PROC_SPROTECT) to ensure that some processes are immune. However,
a panic approach is still useful in some environments. This is primarily
intended as a development/debugging tool.
Differential Revision: D1627
Reviewed by: kib
MFC after: 1 week
This could cause data corruption due to accessing wrong LUN in case of
retries on write errors. Failed writes were retried to read LUN.
MFC after: 3 days
of an vm space may require obtaining sleepable locks. Hold the
process to keep the pointer valid, and change trylock to lock, since
there is no longer two process locks owned simultaneously in
vm_pageout_oom().
Note that after the process lock is dropped, process might exec, and
no longer qualify as the owner of biggest vm space.
In collaboration with: rstone
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
o Digital Audio Multiplexer (AUDMUX)
o Smart Direct Memory Access Controller (SDMA)
o Synchronous Serial Interface (SSI)
Disable by default as it depends on SDMA firmware.
Sponsored by: Machdep, Inc.
for i386, and from the code inspection, nothing in the
arm/mips/sparc64 implementations depends on it.
Discussed with: imp, nwhitehorn
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
This helps to reduce code size in statically linked applications.
Submitted by: Sebastian Huber <sebastian.huber@embedded-brains.de>
MFC after: 2 weeks
(This change was supposed to be included in r277508.)
sys/boot/i386/libfirewire/firewire.c:
Fix configuration ROM generation count wrapping logic
so that the generation count is never outside of
allowed limits (0x2 -> 0xF).
Submitted by: gibbs
MFC after: 1 week
MFC with: 277508
Sponsored by: Spectra Logic
MFSpectraBSD: 1110685 on 2015/01/05
The core kernel part is patch file utimes.2008.4.diff from
pluknet@FreeBSD.org. I updated the code for API changes, added the manual
page and added compatibility code for old kernels. There is also audit and
Capsicum support.
A new UTIME_* constant might allow setting birthtimes in future.
Differential Revision: https://reviews.freebsd.org/D1426
Submitted by: pluknet (partially)
Reviewed by: delphij, pluknet, rwatson
Relnotes: yes
A "size" symbol with its address set to the length of handler would be
shifted forward with all other addresses when relocations are processed.
Instead, just note the end and do the subtraction at runtime.
in bitfield argument is wrong, as it will be treated as bit 10, causing any
code printing >=10 bits with bit 10 on as having a trailing comma.
Newline (intended one) should be part of the format string (already present
in the examples).
Also fix grammar and kill EOL whitespace in comment while here.
PR: 195005
Approved by: bdrewery
I edited the original change to retain the use of arc4random() as a seed for
the hashing as a very basic defense against intentional lagg port selection.
The author's original commit message (edited slightly):
sys/net/ieee8023ad_lacp.c
sys/net/if_lagg.c
In lagg_hashmbuf, use the FNV hash instead of the old
hash32_buf. The hash32 family of functions operate one octet
at a time, and when run on a string s of length n, their output
is equivalent to :
----- i=n-1
\
n \ (n-i-1) 32
( seed^ + / 33^ * s[i] ) % 2^
/
----- i=0
The problem is that the last five bytes of input don't get
multiplied by sufficiently many powers of 33 to rollover 2^32.
That means that changing the last few bytes (but obviously not
the very last) of input will always change the value of the
hash by a multiple of 33. In the case of lagg_hashmbuf() with
ipv4 input, the last four bytes are the TCP or UDP port
numbers. Since the output of lagg_hashmbuf is always taken
modulo the port count, and 3 is a common port count for a lagg,
that's bad. It means that the UDP or TCP source port will
never affect which lagg member is selected on a 3-port lagg.
At 10Gbps, I was not able to measure any difference in CPU
consumption between the old and new hash.
Submitted by: asomers (original commit)
Reviewed by: emaste, glebius
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 1001723 on 2013/08/28 (original)
1114258 on 2015/01/22 (edit)
sys/netinet/ip_carp.c:
Add a "reason" string parameter to carp_set_state() and
carp_master_down_locked() allowing more specific logging
information to be passed into these apis.
Refactor existing state transition logging into a single
log call in carp_set_state().
Update all calls to carp_set_state() and
carp_master_down_locked() to pass an appropriate reason
string. For state transitions that were previously logged,
the output should be unchanged.
Submitted by: gibbs (original), asomers (updated)
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 1039697 on 2014/02/11 (original)
1049992 on 2014/03/21 (updated)
FreeBSD developers need more time to review patches in the surrounding
areas like the TCP stack which are using MPSAFE callouts to restore
distribution of callouts on multiple CPUs.
Bump the __FreeBSD_version instead of reverting it.
Suggested by: kmacy, adrian, glebius and kib
Differential Revision: https://reviews.freebsd.org/D1438
very questionable, since it makes vimages more dependent on each other. But
the reason for the backout is that it screwed up shutting down the pf purge
threads, and now kernel immedially panics on pf module unload. Although module
unloading isn't an advertised feature of pf, it is very important for
development process.
I'd like to not backout r276746, since in general it is good. But since it
has introduced numerous build breakages, that later were addressed in
r276841, r276756, r276747, I need to back it out as well. Better replay it
in clean fashion from scratch.
The newer boards don't have the response field that indicates
whether the SCSI status byte is present. You have to just look to
see whether it is non-zero.
The code was looking to see whether the sense length was valid
before propagating the SCSI status byte (and sense information) up
the stack. With a status like Reservation Conflict, there is no
sense information, only the SCSI status byte. So it wasn't getting
correctly returned.
isp.c:
In isp_intr(), if we are on a 2400 or 2500 type board and
get a response, look at the actual contents of the
SCSI status value and set the RQSF_GOT_STATUS flag
accordingly so that return any SCSI status value we get. The
RQSF_GOT_SENSE flag will get set later on if there is
actual sense information returned.
Submitted by: ken
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 1112791 on 2015/01/15
If the user sends an XPT_RESET_DEV CCB, make sure to reset the
Fibre Channel Command Reference Number if we're running on a FC
controller.
We send a SCSI Target Reset when we get this CCB, and as a result
need to reset the CRN to 1 on the next command.
isp_freebsd.c:
In the XPT_RESET_DEV implementation in isp_action(), reset
the CRN if we're on a FC controller.
Submitted by: ken
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 1112787 on 2015/01/15
Fix SCSI status byte reporting on 4Gb and 8Gb Qlogic boards.
The newer boards don't have the response field that indicates
whether the SCSI status byte is present. You have to just look to
see whether it is non-zero.
The code was looking to see whether the sense length was valid
before propagating the SCSI status byte (and sense information) up
the stack. With a status like Reservation Conflict, there is no
sense information, only the SCSI status byte. So it wasn't getting
correctly returned.
isp.c:
In isp_intr(), if we are on a 2400 or 2500 type board and
get a response, look at the actual contents of the
SCSI status value and set the RQSF_GOT_STATUS flag
accordingly so that return any SCSI status value we get. The
RQSF_GOT_SENSE flag will get set later on if there is
actual sense information returned.
Submitted by: ken
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 1112791 on 2015/01/15
the data the inline functions access together at the start of the bus_space
struct. The start-of part isn't so important, it's the grouping-together
that's the point: now all the most-accessed data should be in one cache line.
Suggested by: cognet
systems with more than 4GB of physical memory.
To remotely debug the system 'stealthy' which has a kernel
with this change installed and firewire properly configured:
% fwcontrol -m stealthy (or stealthy's firewire EUI64)
% kgdb kernel /dev/fwmem0.0
sys/dev/firewire/fwohci.c:
Rather than hard code the upper limit for hw based
automatic responses to remote DMA requests at 4GB,
program the hardware using Maxmem, the page number
one higher than the highest physical page detected
in the system.
While here, garbage collect more useless splfw()
calls.
Submitted by: gibbs
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 1110994 on 2015/01/06
asynchronous remote dma request (DMA request that the
hardware cannot automatically handle).
sys/dev/firewire/firewire.c
In fw_rcv(), add missing early return in the error
path for DMA requests to unregistered regions.
Submitted by: gibbs
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 1110993 on 2015/01/06
sys/boot/i386/libfirewire/firewire.c:
sys/dev/firewire/firewire.c:
Fix configuration ROM generation count wrapping logic
so that the generation count is never outside of
allowed limits (0x2 -> 0xF).
sys/dev/firewire/firewire.c:
In fw_xfer_unload(), xfer->fc may be NULL. Protect
against this before taking the fc lock.
Submitted by: gibbs
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 1110685 on 2015/01/05
sys/dev/firewire/firewire.c:
In fw_xfer_unload() expand lock coverage so that
the test for FWXF_INQ doesn't race with it being
cleared in another thread.
Submitted by: gibbs
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 1110207 on 2015/01/02
sys/dev/firewire/firewire.c:
In fw_xfer_unload(), clear the FWXF_INQ flag on the
xfer under protection of the FW_GMTX, after the
xfer is removeed from the tx/rx queue. Otherwise
it is possible for the xfer to be removed again
(corrupting the list or immediately panicing) from
another thread that has found this xfer in the
transaction label table.
Submitted by: gibbs
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 1110200 on 2015/01/02
