Strict compatibility requirement is a root of problems when simplebus'
node has two compatibility strings (i.e. on Armada38x). Removing this
requirement should not interfere with other platforms.
fdt_is_compatible_strict() and fdt_find_compatible() calls were changed
in fdt_common.c and mv_common.c.
Reviewed by: ian, imp
Obtained from: Semihalf
Sponsored by: Stormshield
Submitted by: Bartosz Szczepanek <bsz@semihalf.com>
Differential revision: https://reviews.freebsd.org/D4602
Ranges property of 'soc' node used two-cell addresses which resulted in
casting errors as simplebus resource allocation works with 32-bit u_long
variables. FDT ranges were simplified.
Reviewed by: imp
Obtained from: Semihalf
Sponsored by: Stormshield
Submitted by: Michal Stanek <mst@semihalf.com>
Differential revision: https://reviews.freebsd.org/D4212
This commit introduces initial support for Marvell Armada38x platform.
Changes:
- Add common DTS files for Armada38x SoCs and DTS file for A388-GP
- Add ARMADA38X kernel configuration
- Add option SOC_MV_ARMADA38X and set MV_PCI_PORTS
- Add list of files to compile
- Implement get_tclk(), get_sar_value(), cpu_reset() functions
- Add CPU ID and SoC numbers
- Correct ifdefs in arm/mv/timer.c
Reviewed by: ian, imp
Obtained from: Semihalf
Sponsored by: Stormshield
Submitted by: Michal Stanek <mst@semihalf.com>
Differential revision: https://reviews.freebsd.org/D4210
Including arm/mv/gpio.c now depends on 'gpio' device. 'device gpio' was
added to all kernconf files of Marvell boards, except ARMADAXP (dummy
mv_gpio_res definition was removed) and ARMADA38X (not supported yet).
This commit allows to use generic files.mv on A38X.
Reviewed by: andrew
Obtained from: Semihalf
Sponsored by: Stormshield
Submitted by: Bartosz Szczepanek <bsz@semihalf.com>
Differential revision: https://reviews.freebsd.org/D4372
phdr locks locked. This allows to call rtld services from the
callback, which is only reasonable for dlopen(path, RTLD_NOLOAD) to
test existence of the library in the image, and for dlsym(). The
later might still be not quite safe, due to the lazy resolution of
filters.
To allow dropping the locks around iteration in dl_iterate_phdr(3), we
insert markers to track current position between relocks. The global
objects list is converted to tailq and all iterators skip markers,
globallist_next() and globallist_curr() helpers are added.
Reported and tested by: davide
Reviewed by: kan
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
New annotation coming into use in the common code. Support its use by
adding null macro definitions for non-Windows platforms.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
X-MFC with: r293901
This fixes incremental build of OpenSSH after the recent upgrade.
For example, in secure/lib/libssh, -include ssh_namespace.h is used on
all files. This is not tracked in the .depend file though due to
MKDEP_CFLAGS not including it. The ssh example was broken in r291941
when not using FAST_DEPEND due to the .depend bug. FAST_DEPEND was not
affected by this because it generates dependencies at compile time and
thus sees the -include.
This ugly make syntax could be simpler for bmake by using :tW but
fmake-compatible syntax is used since this needs to be MFC'd all the way
to stable/9.
Also add a temporary hack to workaround existing checkouts building
incrementally with a .depend file not having these headers.
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
First, the authfd API now uses a direct file descriptor for the control
socket instead of a more abstract AuthenticationConnection structure.
Second, the functions now consistently return an error value.
Reviewed by: bdrewery
If a driver's Linux mmap callback passed vm_page_prot through unchanged,
then linux_dev_mmap_single() would try to apply whatever VM_MEMATTR_xxx
value 0 is to the mapping. On x86, VM_MEMATTR_DEFAULT is the PAT value
for write-back (WB) which is 6, while 0 maps to the PAT value for
uncacheable (UC). Thus, any mmap request that did not explicitly set
page_prot was tried to map memory as UC triggering the warning in
sg_pager_getpages().
Tested by: np
Reported by: Krishnamraju Eraparaju @ Chelsio
MFC after: 3 days
Sponsored by: Chelsio Communications
to actually wait until the TX FIFOs of UARTs have be drained before
returning. This is done by bringing the equivalent of the TS_BUSY flag
found in the previous implementation back in an ABI-preserving way.
Reported and tested by: Patrick Powell
Most likely, drivers for USB-serial-adapters likewise incorporating
TX FIFOs as well as other terminal devices that buffer output in some
form should also provide implementations of tsw_busy.
MFC after: 3 days
This was a regression in r290629, which was revealed partly in r294360.
Once 'make depend' has ran it will generate all headers already. Thus
even with FAST_DEPEND lacking proper dependencies before building, it
will not have any missing headers. Once objects are compiled the depend
files will be generated with proper dependencies.
Sponsored by: EMC / Isilon Storage Division
The return value doesn't need to be checked, because nvlist_get_guid's
callers check the returned values of the guids.
Coverity CID: 1341869
MFC after: 1 week
X-MFC-With: 292066
Sponsored by: Spectra Logic Corp
This is needed to be able to run check-links.sh against a "sysrooted"
binary while ensuring that the ldd(1) call done on the host uses the
host libc. It is not possible to set LD_LIBRARY_PATH before calling
check-links.sh as then the "sysrooted" libc would be incorrectly used.
A LD_PRELOAD=libc.so is used to ldd(1) as it needs to use the host libc
to run. ldd(1) is a simple wrapper around execve(2) and dlopen(2) with
env LD_TRACE_LOADED_OBJECTS set. Due to the dlopen(2) restriction on
shared library tracing ldd(1) is still required for this lookup.
Sponsored by: EMC / Isilon Storage Division
This reworks r289254 and removes ALL_SUBDIR_TARGETS.
Because there is an include guard in this file there is no need for
LOCAL_ or ?= on SUBDIR_TARGETS or STANDALONE_SUBDIR_TARGETS. These can
just be set via src.conf. By the time bsd.subdir.mk is included it will
just append the values to the existing value and work fine. This allows
a consistent way to append to these variables without introducing a
LOCAL_ var for STANDALONE_SUBDIR_TARGETS or renaming the historical
SUBDIR_TARGETS.
Sponsored by: EMC / Isilon Storage Division
If filemon is used then there is no need to generate dependency files during
compilation as the .meta files will achieve the same result.
This is a temporary solution until FAST_DEPEND is default. Once that is
default there will be an option to disable dependency generation entirely
as it is only useful if an incremental build is planned, thus META_MODE+filemon
can enable that option to short-circuit all FAST_DEPEND-related logic.
Sponsored by: EMC / Isilon Storage Division
The bad_truncate test sets the uimmutable flag to produce an error in
truncate, but that flag isn't supported by ZFS. If /tmp is on a ZFS
filesystem, the test will fail. Change it to use readonly permissions and
an unpriveleged user instead.
Reviewed by: jilles
MFC after: 1 week
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D4862
- Pull the vmspace logic out into helper functions and reduce duplication.
Operations on the vmspace are all isolated to vm_map.c, but it now exports
a new 'vmspace_switch_aio' for use by AIO kernel processes.
- When an AIO kernel process wants to exit, break out of the main loop and
perform cleanup after the loop end. This reduces a lot of indentation and
allows cleanup to more closely mirror setup actions before the loop starts.
- Convert a DIAGNOSTIC to KASSERT().
- Replace mycp with more typical 'p'.
Reviewed by: kib
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D4990
This code dates back to the initial AIO support and the commit log does
not explain why it is needed. However, I cannot find anything in the
AIO code or the various file methods (fo_read/fo_write) that would change
behavior due to using a private session instead of proc0's session.
Reviewed by: kib
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D4988
The local build rule used to set -fvisibility=hidden and -fPIC, in
addition to -fexceptions and -D defines that had no effect.
With -fvisibility=hidden and -fPIC in STATIC_CXXFLAGS the standard
bsd.lib.mk rules are suitable for libgcc_s's C++ source.
PR: 206381
Sponsored by: The FreeBSD Foundation
Using zvols as backing devices for ZFS pools is fraught with panics and
deadlocks. For example, attempting to online a missing device in the
presence of a zvol can cause a panic when vdev_geom tastes the zvol. Better
to completely disable vdev_geom from ever opening a zvol. The solution
relies on setting a thread-local variable during vdev_geom_open, and
returning EOPNOTSUPP during zvol_open if that thread-local variable is set.
Remove the check for MUTEX_HELD(&zfsdev_state_lock) in zvol_open. Its intent
was to prevent a recursive mutex acquisition panic. However, the new check
for the thread-local variable also fixes that problem.
Also, fix a panic in vdev_geom_taste_orphan. For an unknown reason, this
function was set to panic. But it can occur that a device disappears during
tasting, and it causes no problems to ignore this departure.
Reviewed by: delphij
MFC after: 1 week
Relnotes: yes
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D4986
- Add optimizing LRO wrapper which pre-sorts all incoming packets
according to the hash type and flowid. This prevents exhaustion of
the LRO entries due to too many connections at the same time.
Testing using a larger number of higher bandwidth TCP connections
showed that the incoming ACK packet aggregation rate increased from
~1.3:1 to almost 3:1. Another test showed that for a number of TCP
connections greater than 16 per hardware receive ring, where 8 TCP
connections was the LRO active entry limit, there was a significant
improvement in throughput due to being able to fully aggregate more
than 8 TCP stream. For very few very high bandwidth TCP streams, the
optimizing LRO wrapper will add CPU usage instead of reducing CPU
usage. This is expected. Network drivers which want to use the
optimizing LRO wrapper needs to call "tcp_lro_queue_mbuf()" instead
of "tcp_lro_rx()" and "tcp_lro_flush_all()" instead of
"tcp_lro_flush()". Further the LRO control structure must be
initialized using "tcp_lro_init_args()" passing a non-zero number
into the "lro_mbufs" argument.
- Make LRO statistics 64-bit. Previously 32-bit integers were used for
statistics which can be prone to wrap-around. Fix this while at it
and update all SYSCTL's which expose LRO statistics.
- Ensure all data is freed when destroying a LRO control structures,
especially leftover LRO entries.
- Reduce number of memory allocations needed when setting up a LRO
control structure by precomputing the total amount of memory needed.
- Add own memory allocation counter for LRO.
- Bump the FreeBSD version to force recompilation of all KLDs due to
change of the LRO control structure size.
Sponsored by: Mellanox Technologies
Reviewed by: gallatin, sbruno, rrs, gnn, transport
Tested by: Netflix
Differential Revision: https://reviews.freebsd.org/D4914
Prior to this patch, unless SSL_CA_CERT_FILE is set in the environment,
libfetch will set the CA file to "/usr/local/etc/cert.pem" if it exists,
and to "/etc/ssl/cert.pem" otherwise. This has the consequence of
masking SSL_CA_CERT_PATH, because OpenSSL will ignore the CA path if a CA
file is set but fails to load (see X509_STORE_load_locations()).
While here, fall back to OpenSSL defaults if neither SSL_CA_CERT_FILE nor
SSL_CA_CERT_PATH are set in the environment, and if neither of the
libfetch default CA files exists.
PR: 193871
Submitted by: John W. O'Brien <john@saltant.com>
Approved by: des
MFC after: 1 week
to be used with eg "vidcontrol -s".
Reviewed by: emaste@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D4968
