Commit Graph

228963 Commits

Author SHA1 Message Date
Ian Lepore
b33d84e005 Bugfix: don't lose the am/pm mode flag when setting the time. Unlike most
RTC chips that have a control register bit for am/pm mode, the DS13xx series
uses one of the high bits in the hour register.  Thus, when setting the time
in am/pm mode, the am/pm mode flag has to be ORed into the hour.
2018-01-10 02:31:59 +00:00
Ian Lepore
b93c58e168 Bugfix: on RTC chips with a 32-bit binary counter, after reading the time,
return immediately rather than falling through to the logic that reads
BCD-encoded time.
2018-01-10 02:28:10 +00:00
John Baldwin
f54c5606b3 Allow the fast-path for disk AIO requests to fail requests.
- If aio_qphysio() returns a non-zero error code, fail the request rather
  than queueing it to the AIO kproc pool to be retried via the slow path.
  Currently this means that if vm_fault_quick_hold_pages() reports an
  error, EFAULT is returned from the fast-path rather than retrying the
  request in the slow path where it will still fail with EFAULT.
- If aio_qphysio() wishes to use the fast path for a device that doesn't
  support unmapped I/O but there are already the maximum number of
  such requests in flight, fail with EAGAIN as we do for other AIO
  resource limits rather than queueing the request to the AIO kproc pool.
- Move the opcode check for aio_qphysio() out of the caller and into
  aio_qphysio() to simplify some logic and remove two goto's while here.
  It also uses a whitelist (only supported for LIO_READ / LIO_WRITE)
  rather than a blacklist (skipped for LIO_SYNC).

PR:		217261
Submitted by:	jkim (an earlier version)
MFC after:	2 weeks
Sponsored by:	Chelsio Communications
2018-01-10 00:18:47 +00:00
Jonathan T. Looney
f05c495660 Fix backwards MD_VERIFY logic for md devices.
If the MD_VERIFY flag is set, we should use O_VERIFY. If the MD_VERIFY flag
is not set, we should not.

Reviewed by:	stevek
Sponsored by:	Netflix
Differential Revision:	https://reviews.freebsd.org/D13814
2018-01-10 00:08:57 +00:00
John Baldwin
7e40918452 Simplify some logic by merging an if test with a subsequent switch.
Specifically, in aio_queue_file() the code was doing this:

   if (opcode == LIO_SYNC) {
       ...
   }

   switch (opcode) {
   ...
   case LIO_SYNC:
       ...
   }

This moves the body of the if statement into the LIO_SYNC case of the
switch statement.

MFC after:	2 weeks
Sponsored by:	Chelsio Communications
2018-01-10 00:02:06 +00:00
John Baldwin
8091e52b42 Add a counter to track in-flight AIO requests using unmapped I/O.
MFC after:	2 weeks
Sponsored by:	Chelsio Communications
2018-01-09 23:57:29 +00:00
Pedro F. Giffuni
dd5edb11b1 Use the __result_use_check attribute also for reallocf(3).
The GCC attribute causes a warning to be emitted if a caller of the
function with this attribute does not use its return value. Unlike the
traditional realloc, with reallocf(3) we don't have to check for NULL
values but we still have to make sure the result is used.

MFC after:	3 days
2018-01-09 22:48:13 +00:00
Scott Long
876f6a6af2 Release the held refcount on the probe periph when probing is
done, now that r327741 lets this happen.

Obtained from:	Netflix
2018-01-09 21:24:05 +00:00
Scott Long
7c1374d5f5 Hold a refcount on the periph while running the allocation
queue.  This will allow sub-transports to release their
probe pseudo-device with fewer convoluted restrictions.

Obtained from:	Netflix
2018-01-09 21:23:16 +00:00
Bryan Drewery
15fd9bda9c Bump version for r327597 adding cpucontrol -e support 2018-01-09 21:12:53 +00:00
Alan Somers
324efdfba2 Add Pull Request to the Subversion commit template
Reviewed by:	emaste
MFC after:	2 weeks
Differential Revision:	https://reviews.freebsd.org/D13178
2018-01-09 21:02:39 +00:00
Conrad Meyer
ad7a1fc6c5 Fix Zstd x86 kernel build with -march=<specific>
Disable Zstd experimental support for __BMI__ intrinsics, when built with
-march=foo supporting such intrinsics, to avoid attempting to include
immintrin.h.  If a later Zstd marks the support non-experimental, we may want
to revisit this approach.

Submitted by:	jkim
Reported by:	jkim, "Oliver Hartmann" <ohartmann AT walstatt.org>
2018-01-09 20:53:30 +00:00
Cy Schubert
da7a237fac USNO and possibly others have misinterpreted the maining of the
leapseconds last-update field and incorrectly increment it when changing
the file even though the leapsecond data has not changed. For instance,
if a leapsecond file is obtained from USNO, when it expires it will not
be replaced by a newer file from other sources because it has an
incorrect later last-update (version).

This corrects r304780.

PR:		225029
Submitted by:	ian
MFC after:	3 days
2018-01-09 20:35:58 +00:00
Nathan Whitehorn
566a135bd5 Add XHCI support to powerpc64 GENERIC. This is useful to get input devices
supported on newer POWER hardware and in graphical VMs run on the same,
which are typically XHCI-only. The 32-bit GENERIC kernel, which
does not run on hardware made in the last decade and is unlikely to
encounter XHCI devices, is left unchanged.

PR:		kern/224940
Submitted by:	Gustavo Romero
MFC after:	1 week
2018-01-09 19:41:10 +00:00
Kristof Provost
a60f45a0d5 pf tests: Fix pft_ping.py to work with scapy 2.3.3
Scapy requires the Raw payload to be a string, which was not the case. This
caused the pft_ping.py script to fail, which in turn caused the test to fail.
2018-01-09 19:02:42 +00:00
Warner Losh
dc8ab16ecc Consolidate two identical copies of sysres_ids. 2018-01-09 16:42:24 +00:00
Konstantin Belousov
f489be8de9 Fix year.
Noted by:	oshogbo
Sponsored by:	The FreeBSD Foundation
MFC after:	3 days
2018-01-09 16:28:45 +00:00
Warner Losh
9c5a114886 Remove ccbque.h from i386/isa.
inline ccbque.h into scsi_low.h. The file isn't MD, so shouldn't live
in i386/isa. It's only used by scsi_low, so move it there so no new
clients accidentally grow. scsi_low may not even still work, and the
locking here is still SPL based. CAM should do the right thing, but
I've received no reports of these cards still working. At least it
compiles still and there's one fewer files in sys/i386/isa. While I'm
here, ansify and de-splize. CCB_MWANTED appears to be a clear-only
flag, but I've not changed that.

Differential Review: https://reviews.freebsd.org/D13672
2018-01-09 16:11:33 +00:00
Andrew Turner
8ab09f8a4e Add a function to find the PSCI version the firmware implements from
outside the PSCI driver.

MFC after:	1 week
Sponsored by:	DARPA, AFRL
2018-01-09 15:57:09 +00:00
Andrew Turner
4bb409fb8d Add a framework to install CPU errata on arm64. Each erratum can encode
a mask and value to compare with the Main ID Register. If these match then a
function is called to handle the installation of the erratum workaround.

No errata are currently handled, however this will change soon in a future
commit.

MFC after:	1 week
Sponsored by:	DARPA, AFRL
2018-01-09 14:33:05 +00:00
Andriy Gapon
091da2dfa5 vmm/svm: contigmalloc of the whole svm_softc is excessive
This is a followup to r307903.

struct svm_softc takes more than 200 kilobytes while what we really need
is 3 contiguous pages for I/O permission map and 2 contiguous pages for
MSR permission map.  Other physically mapped structures have a size of
a single page, so a proper alignment is sufficient for their correct
mapping.

Thus, only the permission maps are allocated with contigmalloc now,
the softc is allocated with a regular malloc.

Additionally, this commit adds a check that malloc returns memory with the
expected page alignment and that contigmalloc does not fail.
Unfortunately, at present svm_vminit() is expected to always succeed and
there is no way to report an error.
So, a contigmalloc failure leads to a panic.
We should probably fix this.

MFC after:	2 weeks
2018-01-09 14:22:18 +00:00
Andriy Gapon
be5060c116 zfs_mount: restore a bit of ifdef-out illumos code
And correctly mark the end of the replacement FreeBSD code.

MFC after:	1 week
2018-01-09 13:43:04 +00:00
Andriy Gapon
fac38b96d2 usbdevs: add ASMedia vendor ID
MFC after:	1 week
2018-01-09 13:42:08 +00:00
Konstantin Belousov
c999b43527 Generalize the fix from r322757 and apply it to several more places.
The code accesses bp->b_dep without owning the ufs mount softdep lock,
which makes it possible for the derefenced workitem to be freed in
parallel.  In particular, the deallocate_dependencies(),
softdep_disk_io_initiation() and softdep_disk_write_complete() are
affected.

Move the code to safely calculate ump from the buffer with
dependencies into the helper softdep_bp_to_mp() and use it for all
found cases.

Tested by:	pho (as part of the bigger patch)
Reviewed by:	mckusick (as part of the bigger patch)
Sponsored by:	The FreeBSD Foundation
MFC after:	1 week
2018-01-09 10:51:44 +00:00
Konstantin Belousov
e51e3c7e73 When handling write completion, take SU lock around calls to
handle_written_XXX() in case of processing the buffer with an error.

Tested by:	pho (as part of the bigger patch)
Reviewed by:	mckusick (as part of the bigger patch)
Sponsored by:	The FreeBSD Foundation
MFC after:	1 week
2018-01-09 10:44:17 +00:00
Konstantin Belousov
377f88fb08 Postpone the disassotiation of the background write buffer with devvp
so that buf_complete() sees fully constructed buffer.

This is a NOP right now, but will be needed by the forthcoming SU change.

Reported and tested by:	pho
Reviewed by:	mckusick
Sponsored by:	The FreeBSD Foundation
MFC after:	1 week
2018-01-09 10:33:11 +00:00
Eitan Adler
d85e65cb35 ldconfig(8): use .Nm instead of 'ldconfig' 2018-01-09 06:51:41 +00:00
Cy Schubert
bdb0c28072 When growing the state, also grow the seed array. Otherwise memory
that was not allocated will be accessed.

This necessitated refactoring state seed allocation from
ipf_state_soft_init() into a new common ipf_state_seed_alloc() function
as it is now also used by ipf_state_rehash() when changing the size of
the state hash table in addition to by ipf_state_soft_init() during
initialization.

According to Christos Zoulas <christos@NetBSD.org>:

The bug was encountered by a NetBSD vendor who's customer machines had
large ipfilter states. The bug was reliably triggered by resizing the
state variables using "ipf -T".

Submitted by:	Christos Zoulas <christos@NetBSD.org>
Reviewed by:	delphij, rgrimes
Obtained from:	NetBSD ip_state.c CVS revs r1.9 and r1.10
MFC after:	2 weeks
Differential Revision:	https://reviews.freebsd.org/D13755
2018-01-09 06:43:58 +00:00
Conrad Meyer
4b42739b37 Fix Zstd kernel build with GCC 4.2
By disabling the -Winline warning.  Fixes the powerpc and sparc64 build
after r327706.

Note: MIPS and RISCV builds still broken due to absense of __ctzdi2 (aka
__builtin_ctzll) in their libgcc or libcompiler-rt libraries.

Reported by:	markj
Sponsored by:	Dell EMC Isilon
2018-01-09 03:28:24 +00:00
Scott Long
bff0b56cdf Don't hold the periph locks during dump.
Obtained from:	Netflix
2018-01-09 00:17:15 +00:00
Scott Long
04e814aecd Don't hold the periph lock when calling into cam_periph_runccb()
from the ada and da dump routines.  This avoids difficult locking
problems from needing to be handled.  While it might seem like this
would leave the periphs unprotected during dump, they were aleady
at risk of unexpected removal due to the dump functions not
keeping refcount state across the many calls that come in during
a dump.  This is an exercise for future work.

Obtained from:	Netflix
2018-01-09 00:10:59 +00:00
Scott Long
329e7a8b51 Protect against a possible NULL deference from an accessor
function.

Obtained from:	Netflix
2018-01-09 00:00:55 +00:00
Mark Johnston
78f57a9cde Generalize the gzio API.
We currently use a set of subroutines in kern_gzio.c to perform
compression of user and kernel core dumps. In the interest of adding
support for other compression algorithms (zstd) in this role without
complicating the API consumers, add a simple compressor API which can be
used to select an algorithm.

Also change the (non-default) GZIO kernel option to not enable
compressed user cores by default. It's not clear that such a default
would be desirable with support for multiple algorithms implemented,
and it's inconsistent in that it isn't applied to kernel dumps.

Reviewed by:	cem
Differential Revision:	https://reviews.freebsd.org/D13632
2018-01-08 21:27:41 +00:00
Conrad Meyer
d3692a4dee Integrate zstd into the kernel
Mock userspace headers and include mocked headers first in compilation
command to inject kernel headers and override e.g., malloc(3) with
malloc(9).

Submitted by:	allanjude
Reviewed by:	imp (earlier version), bapt (earlier version)
Differential Revision:	https://reviews.freebsd.org/D10407
2018-01-08 20:14:16 +00:00
John Baldwin
349b6dad63 Use <stand.h> instead of <inttypes.h> and <stdio.h> in boot code.
In the freestanding boot compile environment, standard headers are not
available.  Curiously, only building with clang exposed this as compiles
with external GCC still succeeded.

Sponsored by:	DARPA / AFRL
2018-01-08 18:47:35 +00:00
John Baldwin
9bd8ae10e3 Fix printf missing format variables warnings.
Include the failing kernel file name for errors in beri_elf64_exec().

Sponsored by:	DARPA / AFRL
2018-01-08 18:46:10 +00:00
John Baldwin
9433594417 Define __dmadat after #include'ing ufsread.c.
The __dmadat variable is a statically allocated I/O buffer.  The type is
declared in the ufsread.c source file and clang warns if a variable is
defined before it's type is declared.

Sponsored by:	DARPA / AFRL
2018-01-08 18:44:36 +00:00
Mark Johnston
8b0a00b745 Sort and remove unneeded includes.
MFC after:	1 week
Sponsored by:	Dell EMC Isilon
2018-01-08 15:56:40 +00:00
Pedro F. Giffuni
d6d1add4ea Revert r327697:
malloc(9): drop the __result_use_check attribute for the kernel allocator.

My bad: __result_use_check just checks the for the general and we always
want to make sure allocated memory is used, not only checked for nullness.

Add it to reallocf since that was missing.
2018-01-08 15:54:29 +00:00
Mark Johnston
7653e6d781 Release the queue lock before restarting the worker loop.
Reported and tested by:	pho
MFC after:	3 days
Sponsored by:	Dell EMC Isilon
2018-01-08 15:41:49 +00:00
Pedro F. Giffuni
6db47c9d5b malloc(9): drop the __result_use_check attribute for the kernel allocator.
The __result_use_check attribute was brought to the kernel malloc in
r281203 for consistency with the userland malloc.

For the case of the M_WAITOK flag, the kernel malloc(), realloc(), and
reallocf() cannot return NULL so in that case the __result_use_check
attribute makes no sense.

We don't have any way of conditionalizing such attributes so just drop it.

MFC after:	3 days
2018-01-08 15:41:48 +00:00
Fabien Thomas
de2b2c908a Fix uninitialized crp_retw_id when using asynchronous crypto drivers
with defered callbacks.

Submitted by:	emeric.poupon@stormshield.eu
Reported by:	mav@
Reviewed by:	fabient@
2018-01-08 13:43:12 +00:00
Andrew Turner
dde4c2fc9d Only install the new pagetable pointer into ttbr0_el1 when it differs from
the existing value.

MFC after:	1 week
Sponsored by:	DARPA, AFRL
2018-01-08 11:08:45 +00:00
Andrew Turner
45a91d4538 Move some of the common thread switching code into C. This will help with
future optimisations, e.g. using Address Space IDs (asid).

MFC after:	1 week
Sponsored by:	DARPA, AFRL
2018-01-08 10:23:31 +00:00
Mariusz Zaborski
d06b4cefed Document the DNS Casper service.
Reviewed by:	brueffer@, bcr@
Differential Revision:	https://reviews.freebsd.org/D13762
2018-01-08 09:20:08 +00:00
Alan Somers
1d23aa6ec7 geli: optimize tests
Reduce the geli tests' runtime by about a third:

* In integrity_test:copy, use a file-backed md(4) device instead of a
  malloc'd one.  That way we can corrupt the underlying storage without
  needing to detach and reattach the geli device.

* In integrity_test:{copy, hmac, data} and onetime_test:{onetime,
  onetime_a}, move reads of /dev/random out of the loop.

MFC after:	2 weeks
2018-01-08 00:10:45 +00:00
Ed Schouten
4b6b56b32b Use mallocarray(9) in CloudABI kernel code where possible.
Submitted by:	pfg@
2018-01-07 22:38:45 +00:00
Alan Somers
565a0a2c65 geli: convert remaining TAP tests to ATF
MFC after:	2 weeks
2018-01-07 22:21:07 +00:00
Alan Somers
48c29f849e Fix typo from r327666
MFC after:	13 days
X-MFC-With:	327666
2018-01-07 21:57:52 +00:00
Justin Hibbits
f1a48eaf0d Add missing file to gpiobus module
ofw_gpiobus.c is needed when FDT is used.

MFC after:	2 weeks
2018-01-07 20:28:17 +00:00