in machdep.c (it should use the global nmbclusters). Moved the calculation
of nmbclusters into conf/param.c (same place where nmbclusters has always
been assigned), and made the calculation include an extra amount based
on "maxusers". NMBCLUSTERS can still be overrided in the kernel config
file as always, but this change will make that generally unnecessary. This
fixes the "bug" reports from people who have misconfigured kernels seeing
the network hang when the mbuf cluster pool runs out.
Reviewed by: John Dyson
attempted to check for insecure and fatal eflags and segment
selectors, but missed many cases and got the IOPL check back to
front. The other syscalls didn't check at all.
sys_process.c, machdep.c:
Only allow PT_WRITE_U to write to the registers (ordinary and FP).
psl.h, locore.s, machdep.c:
Eliminate PSL_MBZ, PSL_MBO and PSL_USERCLR. We are not supposed
to assume anything about the reserved bits. Use PSL_USERCHANGE
and PSL_KERNEL instead. Rename PSL_USERSET to PSL_USER.
exception.s:
Define a private label for use by doreti when returning to user
mode fails.
machdep.c:
In syscalls, allow changing only the eflags that can be changed on
486's in user mode (no longer attempt to allow benign IOPL changes;
allow changing the nasty PSL_NT; don't allow changing the i586
bits).
Don't attempt to check all the cases involving invalid selectors
and %eip's. Just check for privilege violations and let the invalid
things cause a trap.
procfs_machdep.c:
Call the ptrace register functions to do all the work for reading
and writing ordinary registers and for single stepping.
trap.c:
Ignore traps caused by PSL_NT being set. Previously, users could
cause a fatal trap in user mode by setting PSL_NT and executing an
iret, and a fatal trap in kernel mode by setting PSL_NT and making
a syscall. PSL_NT was cleared too late and not in enough modes to
fix the problem.
Make all traps in user mode (except T_NMI) nonfatal.
Recover from traps caused by attempting to load invalid user
registers in doreti by restarting the traps so that they appear to
occur in user mode.
---
Fix bogons that I noticed while fixing the above:
psl.h:
Fix some comments.
Uniformize idempotency ifdef.
exception.s, machdep.c:
Remove rsvd[0-14]. rsvd0 hasn't been reserved since the 486 came
out. Replace rsvd0 by `align'. rsvd[0-11] used wrong (magic
non-unique) trap numbers. Replace rsvd[1-14] by rsvd.
locore.s:
Enable alignment check flag on 486's and 586's.
machdep.c:
Use a better type for kstack[].
Use TFREGP() to find the registers.
Reformat ptrace functions from SEF to something closer to KNF.
procfs_machdep.c:
The wrong pointer to the registers got fixed as a side effect.
Implement reading and writing of FP registers.
/proc/*/*regs now work (only) for processes that are in memory.
Clean up comments.
trap.c, trap.h:
Remove unused trap types.
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
Keep track of interrupt nesting level. It is normally 0
for syscalls and traps, but is fudged to 1 for their exit
processing in case they metamorphose into an interrupt
handler.
i386/genassym.c;
Remove support for the obsolete pcb_iml and pcb_cmap2.
Add support for pcb_inl.
i386/swtch.s:
Fudge the interrupt nesting level across context switches and in
the idle loop so that the work for preemptive context switches
gets counted as interrupt time, the work for voluntary context
switches gets counted mostly as system time (the part when
curproc == 0 gets counted as interrupt time), and only truly idle
time gets counted as idle time.
Remove obsolete support (commented out and otherwise) for pcb_iml.
Load curpcb just before curproc instead of just after so that
curpcb is always valid if curproc is. A few more changes like
this may fix tracing through context switches.
Remove obsolete function swtch_to_inactive().
include/cpu.h:
Use the new interrupt nesting level variable to implement a
non-fake CLF_INTR() so that accounting for the interrupt state
works.
You can use top, iostat or (best) an up to date systat to see
interrupt overheads. I see the expected huge interrupt overheads
for ISA devices (on a 486DX/33, about 55% for an IDE drive
transferring 1250K/sec and the same for a WD8013EBT network card
transferring 1100K/sec). The huge interrupt overheads for serial
devices are unfortunately normally invisible.
include/pcb.h:
Remove the obsolete pcb_iml and pcb_cmap2. Replace them by
padding to preserve binary compatibility.
Use part of the new padding for pcb_inl.
isa/icu.s:
isa/vector.s:
Keep track of interrupt nesting level.
Alphabetize.
Write all i/o functions in sleep so that we don't use anything from
NetBSD.
Restore the correct type of u_int for ports. This saves a whole cycle
per i/o on 486's.
Change `inline' back to __inline to avoid compiler warnings with
-Wreally-all.
Don't implement bdb() unless BDE_DEBUGGER is defined. Declare bdb_exists
outside the function to avoid hundreds of compiler warnings.
Let the compiler pick the register in asms if possible.
Implement ffs() using inline asm(). gcc provides a slightly different
one. It was broken in gcc-2.4.5 but works now. Declaring a correct
version inline ensures getting a correct version. FreeBSD-1.1.5 has
an slow inline version but FreeBSD-2.0 has a library version (which
probably never gets used).
Do inb() and outb() without using %edx for constant ports below 0x100.
Remove casts to the same type in queue functions.
Declare prototypes for everything implemented i386/*.s and also for
everything that is normally implemented as an inline here (I don't
like the current complete dependency on gcc). Ifdef out the prototypes
that are declared elsewhere. THere should be a separate header to
declare things implemented in i386/*.s, but then it would be harder
to override declarations with inlines.
${UII}
Partly support BDE_DEBUGGER. Still broken by conflict with APM. Does
nothing if BDE_DEBUGGER is not defined.
Clean up prototypes and data declarations. Declare most of the segment
functions that are implemented in support.s. Make data private in
machdep.c if possible.
Parenthesize expressions in macros properly!
${Uniformize idempotency ifdef}.
to avoid compiler warnings.
Clean up prototypes: alphabetize; don't use redundant `extern' or
meaningless `extern inline'.
Uniformize idempotency ifdef.
for it is incomplete and buggy. There is no problem unless Xintr0()
is reentered or should be reentered, but high clock interrupt
frequencies for pcaudio cause Xintr0() to be reentered (or clock
ticks to be lost when Xintr0() should have been reentered but
wasn't), and we lose little by delaying the call to softclock().
Move declarations related to the clock driver to clock.h.
Move declarations related to the npx driver to npx.h.
Clean up the remaining declarations.
I know that many of these entries are bogus and need to be revisited,
but let's get the tree working again for now and then do a pass through
looking at all the __FreeBSD__ entries, shall we?
cycles. While waiting there I added a lot of the extra ()'s I have, (I have
never used LISP to any extent). So I compiled the kernel with -Wall and
shut up a lot of "suggest you add ()'s", removed a bunch of unused var's
and added a couple of declarations here and there. Having a lap-top is
highly recommended. My kernel still runs, yell at me if you kernel breaks.
matter, but similar bogusness in npx.c causes compiling without -O to fail.
Use __volatile in all asms.
Parenthesize macro args.
Change the names of the macros to avoid namespace pollution.
Remove unnecessary "#ifdef __i386__".
Sort #defines.
Add comments.
This code is mostly taken from the 1.1 port (which was in turn taken from
Dave Mills's kern.tar.Z example). A few significant differences:
1) ntp_gettime() is now a MIB variable rather than a system call. A few
fiddles are done in libc to make it behave the same.
2) mono_time does not participate in the PLL adjustments.
3) A new interface has been defined (in <machine/clock.h>) for doing
possibly machine-dependent things around the time of the clock update.
This is used in Pentium kernels to disable interrupts, set `time', and
reset the CPU cycle counter as quickly as possible to avoid jitter in
microtime(). Measurements show an apparent resolution of a bit more than
8.14usec, which is reasonable given system-call overhead.
Removed inb function since it's more correctly in pio.h
Copied write_eflags and read_eflags over from npx.c
(Some changes to the macros suggested by Bruce were not made at this
time since his suggestions probably apply to all the macros and
these inlined/macro definitions need a lot of cleaning up at some
point in the future.)
Reviewed by: Bruce
if KERNEL is not defined. lib/msun/i387/*.S include asmacros.h to
get the definitions of ENTRY(), etc. This is bogus since asmacros.h
is only supposed to give definitions suitable for the kernel. The
current definitions for the kernel almost worked but are missing
the ".type" declarations. This caused the linker to print warnings
about doubtful relocations for almost anything linked to libm[sun].
Uniformize name and use of idempotence identifier.
the Mach/i386 version of the BSD/vax(?) <machine/psl.h>. The Mach
version has slightly better names for many macros but is now out of
date and little used. It was originally used even less (for spelling
PSL_T as EFL_TF in <machine/db_machdep.h>).
negation whenever we access memory between 640k and 1M.
Original code from NetBSD 1.0-BETA. The exact origins are unclear but
Theo de Raadt, Charles, and Michael V. may have contributed to it.
Submitted by: pst
Changed u_int_inb to just inb and deleted define.
The code generated is identical to that generated with the cast so
the problem was obviously fixed at some point after gcc 1.4
Reviewed by:
Submitted by:
hosing syscons. Doesn anyone know anything about this
or can we just delete it now?
/*
* This roundabout method of returning a u_char helps stop gcc-1.40 from
* generating unnecessary movzbl's.
*/
#ifdef disable_for_gcc-2_6_0
#define inb(port) ((u_char) u_int_inb(port))
#endif
static inline u_int
u_int_inb(u_int port)
{
u_char data;
/*
* We use %%dx and not %1 here because i/o is done at %dx and
not at
* %edx, while gcc-2.2.2 generates inferior code (movw instead
of movl)
* if we tell it to load (u_short) port.
*/
__asm __volatile("inb %%dx,%0" : "=a" (data) : "d" (port));
return data;
}
Reviewed by:
Submitted by:
2. Hack.
Hack is to define RCSID() to null macro so that new msun stuff
will compile. This does NOT belong here, and I DON'T want it to
stay, I just need to put this here for now to enable msun and we need
to talk about what our RCSID story is supposed to be. We talked about
supporting RCSID() one day, and everyone seemed to like the idea
reasonably well of making it a macro you could just no-op this way,
but we never did anything. Now I see that JTCs code has it and I'm
loath to remove it or do anything until we've discussed it some more.
Well, so how about it? What's our story vis-a-vis RCSID() going to
be?
Submitted by: jkh
- Delete redundant declarations.
- Add -Wredundant-declarations to Makefile.i386 so they don't come back.
- Delete sloppy COMMON-style declarations of uninitialized data in
header files.
- Add a few prototypes.
- Clean up warnings resulting from the above.
NB: ioconf.c will still generate a redundant-declaration warning, which
is unavoidable unless somebody volunteers to make `config' smarter.
Delete the ifdef GPL_EMULATE case here and made the padding work for
both types of emulators so that there is no longer a need to compile
ps and friends new if you are using the GPL math emulator instead the
normal one.
``changes'' are actually not changes at all, but CVS sometimes has trouble
telling the difference.
This also includes support for second-directory compiles. This is not
quite complete yet, as `config' doesn't yet do the right thing. You can
still make it work trivially, however, by doing the following:
rm /sys/compile
mkdir /usr/obj/sys/compile
ln -s M-. /sys/compile
cd /sys/i386/conf
config MYKERNEL
cd ../../compile/MYKERNEL
ln -s /sys @
rm machine
ln -s @/i386/include machine
make depend
make
Vastly improved trap.c from me. This rewritten version has a variety of
features, amoung them: higher performance and much higher code quality.
support.s, cpufunc.h:
No longer use gs override to enforce range limits - compare directly
against VM_MAXUSER_ADDRESS instead. The old way caused problems in
preserving the gs selector...and this method is just as fast or faster.
list of changes, I've made the following additional changes:
1) i386/include/ipl.h renamed to spl.h as the name conflicts with the
file of the same name in i386/isa/ipl.h.
2) changed all use of *mask (i.e. netmask, biomask, ttymask, etc) to
*_imask (net_imask, etc).
3) changed vestige of splnet use in if_is to splimp.
4) got rid of "impmask" completely (Bruce had gotten rid of netmask),
and are now using net_imask instead.
5) dozens of minor cruft to glue in Bruce's changes.
These require changes I made to config(8) as well, and thus it must
be rebuilt.
-DG
from Bruce Evans:
sio:
o No diff is supplied. Remove the define of setsofttty(). I hope
that is enough.
*.s:
o i386/isa/debug.h no longer exists. The event counters became too
much trouble to maintain. All function call entry and exception
entry counters can be recovered by using profiling kernel (the new
profiling supports all entry points; however, it is too slow to
leave enabled all the time; it also). Only BDBTRAP() from debug.h
is now used. That is moved to exception.s. It might be worth
preserving SHOW_BITS() and calling it from _mcount() (if enabled).
o T_ASTFLT is now only set just before calling trap().
o All exception handlers set SWI_AST_MASK in cpl as soon as possible
after entry and arrange for _doreti to restore it atomically with
exiting. It is not possible to set it atomically with entering
the kernel, so it must be checked against the user mode bits in
the trap frame before committing to using it. There is no place
to store the old value of cpl for syscalls or traps, so there are
some complications restoring it.
Profiling stuff (mostly in *.s):
o Changes to kern/subr_mcount.c, gcc and gprof are not supplied yet.
o All interesting labels `foo' are renamed `_foo' and all
uninteresting labels `_bar' are renamed `bar'. A small change
to gprof allows ignoring labels not starting with underscores.
o MCOUNT_LABEL() is to provide names for counters for times spent
in exception handlers.
o FAKE_MCOUNT() is a version of MCOUNT() suitable for exception
handlers. Its arg is the pc where the exception occurred. The
new mcount() pretends that this was a call from that pc to a
suitable MCOUNT_LABEL().
o MEXITCOUNT is to turn off any timer started by MCOUNT().
/usr/src/sys/i386/i386/exception.s:
o The non-BDB BPTTRAP() macros were doing a sti even when interrupts
were disabled when the trap occurred. The sti (fixed) sti is
actually a no-op unless you have my changes to machdep.c that make
the debugger trap gates interrupt gates, but fixing that would
make the ifdefs messier. ddb seems to be unharmed by both
interrupts always disabled and always enabled (I had the branch in
the fix back to front for some time :-().
o There is no known pushal bug.
o tf_err can be left as garbage for syscalls.
/usr/src/sys/i386/i386/locore.s:
o Fix and update BDE_DEBUGGER support.
o ENTRY(btext) before initialization was dangerous.
o Warm boot shot was longer than intended.
/usr/src/sys/i386/i386/machdep.c:
o DON'T APPLY ALL OF THIS DIFF. It's what I'm using, but may require
other changes.
Use the following:
o Remove aston() and setsoftclock().
Maybe use the following:
o No netisr.h.
o Spelling fix.
o Delay to read the Rebooting message.
o Fix for vm system unmapping a reduced area of memory
after bounds_check_with_label() reduces the size of
a physical i/o for a partition boundary. A similar
fix is required in kern_physio.c.
o Correct use of __CONCAT. It never worked here for non-
ANSI cpp's. Is it time to drop support for non-ANSI?
o gdt_segs init. 0xffffffffUL is bogus because ssd_limit
is not 32 bits. The replacement may have the same
value :-), but is more natural.
o physmem was one page too low. Confusing variable names.
Don't use the following:
o Better numbers of buffers. Each 8K page requires up to
16 buffer headers. On my system, this results in 5576
buffers containing [up to] 2854912 bytes of memory.
The usual allocation of about 384 buffers only holds
192K of disk if you use it on an fs with a block size
of 512.
o gdt changes for bdb.
o *TGT -> *IDT changes for bdb.
o #ifdefed changes for bdb.
/usr/src/sys/i386/i386/microtime.s:
o Use the correct asm macros. I think asm.h was copied from Mach
just for microtime and isn't used now. It certainly doesn't
belong in <sys>. Various macros are also duplicated in
sys/i386/boot.h and libc/i386/*.h.
o Don't switch to and from the IRR; it is guaranteed to be selected
(default after ICU init and explicitly selected in isa.c too, and
never changed until the old microtime clobbered it).
/usr/src/sys/i386/i386/support.s:
o Non-essential changes (none related to spls or profiling).
o Removed slow loads of %gs again. The LDT support may require
not relying on %gs, but loading it is not the way to fix it!
Some places (copyin ...) forgot to load it. Loading it clobbers
the user %gs. trap() still loads it after certain types of
faults so that fuword() etc can rely on it without loading it
explicitly. Exception handlers don't restore it. If we want
to preserve the user %gs, then the fastest method is to not
touch it except for context switches. Comparing with
VM_MAXUSER_ADDRESS and branching takes only 2 or 4 cycles on
a 486, while loading %gs takes 9 cycles and using it takes
another.
o Fixed a signed branch to unsigned.
/usr/src/sys/i386/i386/swtch.s:
o Move spl0() outside of idle loop.
o Remove cli/sti from idle loop. sw1 does a cli, and in the
unlikely event of an interrupt occurring and whichqs becoming
zero, sw1 will just jump back to _idle.
o There's no spl0() function in asm any more, so use splz().
o swtch() doesn't need to be superaligned, at least with the
new mcounting.
o Fixed a signed branch to unsigned.
o Removed astoff().
/usr/src/sys/i386/i386/trap.c:
o The decentralized extern decls were inconsistent, of course.
o Fixed typo MATH_EMULTATE in comments. */
o Removed unused variables.
o Old netmask is now impmask; print it instead. Perhaps we
should print some of the new masks.
o BTW, trap() should not print anything for normal debugger
traps.
/usr/src/sys/i386/include/asmacros.h:
o DON'T APPLY ALL OF THIS DIFF. Just use some of the null macros
as necessary.
/usr/src/sys/i386/include/cpu.h:
o CLKF_BASEPRI() changes since cpl == SWI_AST_MASK is now normal
while the kernel is running.
o Don't use var++ to set boolean variables. It fails after a mere
4G times :-) and is slower than storing a constant on [3-4]86s.
/usr/src/sys/i386/include/cpufunc.h:
o DON'T APPLY ALL OF THIS DIFF. You need mainly the include of
<machine/ipl.h>. Unfortunately, <machine/ipl.h> is needed by
almost everything for the inlines.
/usr/src/sys/i386/include/ipl.h:
o New file. Defines spl inlines and SWI macros and declares most
variables related to hard and soft interrupt masks.
/usr/src/sys/i386/isa/icu.h:
o Moved definitions to <machine/ipl.h>
/usr/src/sys/i386/isa/icu.s:
o Software interrupts (SWIs) and delayed hardware interrupts (HWIs)
are now handled uniformally, and dispatching them from splx() is
more like dispatching them from _doreti. The dispatcher is
essentially *(handler[ffs(ipending & ~cpl)]().
o More care (not quite enough) is taken to avoid unbounded nesting
of interrupts.
o The interface to softclock() is changed so that a trap frame is
not required.
o Fast interrupt handlers are now handled more uniformally.
Configuration is still too early (new handlers would require
bits in <machine/ipl.h> and functions to vector.s).
o splnnn() and splx() are no longer here; they are inline functions
(could be macros for other compilers). splz() is the nontrivial
part of the old splx().
/usr/src/sys/i386/isa/ipl.h
o New file. Supposed to have only bus-dependent stuff. Perhaps
the h/w masks should be declared here.
/usr/src/sys/i386/isa/isa.c:
o DON'T APPLY ALL OF THIS DIFF. You need only things involving
*mask and *MASK and comments about them. netmask is now a pure
software mask. It works like the softclock mask.
/usr/src/sys/i386/isa/vector.s:
o Reorganize AUTO_EOI* macros.
o Option FAST_INTR_HANDLER_USERS_ES for people who don't trust
fastintr handlers.
o fastintr handlers need to metamorphose into ordinary interrupt
handlers if their SWI bit has become set. Previously, sio had
unintended latency for handling output completions and input
of SLIP framing characters because this was not done.
/usr/src/sys/net/netisr.h:
o The machine-dependent stuff is now imported from <machine/ipl.h>.
/usr/src/sys/sys/systm.h
o DON'T APPLY ALL OF THIS DIFF. You need mainly the different
splx() prototype. The spl*() prototypes are duplicated as
inlines in <machine/ipl.h> but they need to be duplicated here
in case there are no inlines. I sent systm.h and cpufunc.h
to Garrett. We agree that spl0 should be replaced by splnone
and not the other way around like I've done.
/usr/src/sys/kern/kern_clock.c
o splsoftclock() now lowers cpl so the direct call to softclock()
works as intended.
o softclock() interface changed to avoid passing the whole frame
(some machines may need another change for profile_tick()).
o profiling renamed _profiling to avoid ANSI namespace pollution.
(I had to improve the mcount() interface and may as well fix it.)
The GUPROF variant doesn't actually reference profiling here,
but the 'U' in GUPROF should mean to select the microtimer
mcount() and not change the interface.
Eliminates vm_fault overhead on process startup and
mmap referenced data for in-memory pages.
(process startup time using in-memory segments *much* faster)
2) Even more efficient pmap code. Code partially cleaned up.
More comments yet to follow.
(generally more efficient pte management)
3) Pageout clustering ( in addition to the FreeBSD V1.1 pagein
clustering.)
(much faster paging performance on non-write behind disk
subsystems, slightly faster performance on other systems.)
4) Slightly changed vm_pageout code for more efficiency and
better statistics. Also, resist swapout a little more.
(less likely to pageout a recently used page)
5) Slight improvement to the page table page trap efficiency.
(generally faster system VM fault performance)
6) Defer creation of unnamed anonymous regions pager until needed.
(speeds up shared memory bss creation)
7) Remove possible deadlock from swap_pager initialization.
8) Enhanced procfs to provide "vminfo" about vm objects and user
pmaps.
9) Increased MCLSHIFT/MCLBYTES from 2K to 4K to improve net &
socket performance and to prepare for things to come.
John Dyson
dyson@implode.root.com
David Greenman
davidg@root.com
following is a summary:
1) increased object cache back up to a more reasonable value.
2) removed old & bogus cruft from machdep.c (clearseg, copyseg,
physcopyseg, etc).
3) inlined many functions in pmap.c
4) changed "load_cr3(rcr3())" into tlbflush() and made tlbflush inline
assembly.
5) changed the way that modified pages are tracked - now vm_page struct
is kept updated directly - no more scanning page tables.
6) removed lots of unnecessary spl's
7) removed old unused functions from pmap.c
8) removed all use of page_size, page_shift, page_mask variables - replaced
with PAGE_ constants.
9) moved trunc/round_page, atop, ptoa, out of vm_param.h and into i386/
include/param.h, and optimized them.
10) numerous changes to sys/vm/ swap_pager, vnode_pager, pageout, fault
code to improve performance. LRU algorithm modified to be more
effective, read ahead/behind values tuned for better performance,
etc, etc...
a binary link-kit. Make all non-optional options (pagers, procfs) standard,
and update LINT to reflect new symtab requirements.
NB: -Wtraditional will henceforth be forgotten. This editing pass was
primarily intended to detect any constructions where the old code might
have been relying on traditional C semantics or syntax. These were all
fixed, and the result of fixing some of them means that -Wall is now a
realistic possibility within a few weeks.
The following patch adds the addr argument to signal handlers.
The kernel with the patch is no more and no less in compliance or in
violation of POSIX and ANSI C than the kernel before the patch.
The added functionality this addr argument provides is quite useful. It
enables an entire class of algorithms which use mprotect to trace memory
references. Beside garbage collectors, I have heard of this technique being
applied to debuggers and profilers. The only benchmarking I've performed is
using akcl to compile maxima: without the kernel patch, it takes 7 hours to
compile maxima, while with stratified garbage collection, it only takes 50
minutes.
Basically, I can't think of a reason not to add the addr argument and there
is a compelling need for it.
If you find the patch acceptable, please let me know so I can send my
FreeBSD akcl config files to wfs for inclusion in the core akcl release.
The old 386BSD config files there won't work on either NetBSD or FreeBSD.
when the machine panics.
i386/i386/locore.s:
1) got rid of most .set directives that were being used like
#define's, and replaced them with appropriate #define's in
the appropriate header files (accessed via genassym).
2) added comments to header inclusions and global definitions,
and global variables
3) replaced some hardcoded constants with cpp defines (such as
PDESIZE and others)
4) aligned all comments to the same column to make them easier to
read
5) moved macro definitions for ENTRY, ALIGN, NOP, etc. to
/sys/i386/include/asmacros.h
6) added #ifdef BDE_DEBUGGER around all of Bruce's debugger code
7) added new global '_KERNend' to store last location+1 of kernel
8) cleaned up zeroing of bss so that only bss is zeroed
9) fix zeroing of page tables so that it really does zero them all
- not just if they follow the bss.
10) rewrote page table initialization code so that 1) works correctly
and 2) write protects the kernel text by default
11) properly initialize the kernel page directory, upages, p0stack PT,
and page tables. The previous scheme was more than a bit
screwy.
12) change allocation of virtual area of IO hole so that it is
fixed at KERNBASE + 0xa0000. The previous scheme put it
right after the kernel page tables and then later expected
it to be at KERNBASE +0xa0000
13) change multiple bogus settings of user read/write of various
areas of kernel VM - including the IO hole; we should never
be accessing the IO hole in user mode through the kernel
page tables
14) split kernel support routines such as bcopy, bzero, copyin,
copyout, etc. into a seperate file 'support.s'
15) split swtch and related routines into a seperate 'swtch.s'
16) split routines related to traps, syscalls, and interrupts
into a seperate file 'exception.s'
17) remove some unused global variables from locore that got
inserted by Garrett when he pulled them out of some .h
files.
i386/isa/icu.s:
1) clean up global variable declarations
2) move in declaration of astpending and netisr
i386/i386/pmap.c:
1) fix calculation of virtual_avail. It previously was calculated
to be right in the middle of the kernel page tables - not
a good place to start allocating kernel VM.
2) properly allocate kernel page dir/tables etc out of kernel map
- previously only took out 2 pages.
i386/i386/machdep.c:
1) modify boot() to print a warning that the system will reboot in
PANIC_REBOOT_WAIT_TIME amount of seconds, and let the user
abort with a key on the console. The machine will wait for
ever if a key is typed before the reboot. The default is
15 seconds, but can be set to 0 to mean don't wait at all,
-1 to mean wait forever, or any positive value to wait for
that many seconds.
2) print "Rebooting..." just before doing it.
kern/subr_prf.c:
1) remove PANICWAIT as it is deprecated by the change to machdep.c
i386/i386/trap.c:
1) add table of trap type strings and use it to print a real trap/
panic message rather than just a number. Lot's of work to
be done here, but this is the first step. Symbolic traceback
is in the TODO.
i386/i386/Makefile.i386:
1) add support in to build support.s, exception.s and swtch.s
...and various changes to various header files to make all of the
above happen.
Mark the fact that PGSHIFT and PDRSHIFT are really the same as
PG_SHIFT and PD_SHIFT, these should be collapsed some day soon.
Document that KERNBASE should really be KPTDPTDI << PDRSHIFT, for
now leave it as the constant 0xFE000000 until I make a seperate
common header file for this stuff (vmaddresses.h?)
Remove NKMEMCLUSTERS define, it was only being used to define
VM_KMEM_SIZE, so why have all the indirection. Besides who wants
to work in CLBYTE sizes chuncks.
pmap.h:
Fix $Id$ and some other minor format clean ups.
Remove the XXX comment about NKPDE, since it now has the correct value
of 7.
Remove unused LASTPTDI and move the APTD into the very end of memory to
free up 4MB of kernel virtual address space.
Remove unused RSVDPTDI and free up 12MB of kernel virtual address space.
vmparam.h
Fix $Id$.
Increase SHMMAXPGS to 512 (2MB) now that there is room for it to be
bigger. The XXX comment stays until the kernel moves down in memory
to free up enough space to use the proper default of 4MB.
VM_KMEM_SIZE is now a direct constant stating the size of the kernel
malloc region. Increased the value from 3MB to 16MB.
Cleaned up tabs vs spaces after #define to make file consistent.
Removed now unused definitions of I386_PAGE_SIZE and I386_PDR_SIZE
Note That these two where unused and had the wrong values anyway!
Changed I386_KPDES to NKPDE
Changed I386_UPDES to NUPDE
Redid constant assignments of *PTDI's to be sizeable and relative.
Remove patch kit headers, and add $Id$
This is mostly to align some more code with NetBSD.
cpu.h:
Remove the old function vs. include configuration stuff that was
ifdefed out when we went to inline functions.
Remove the define of resettodr that made it a nop, there is
already a function that makes it a nop, no need to #define one.
Remove the #defines of processor types, they are now defined
in cputypes.h, #include that file.
Add struct cpu_nameclass for support of cpu types.
frame.h:
include sys/signal.h, it will be needed in the future.
put the sigframe structure here that was in machdep.c
pcb.h:
Add multiple inclusion protection.
Add pcb_ldt and pcb_ldt_len to pcb structure, this is for the
user mode ldt.
profiling, and various protection checks that cause security holes
and system crashes.
* Changed min/max/bcmp/ffs/strlen to be static inline functions
- included from cpufunc.h in via systm.h. This change
improves performance in many parts of the kernel - up to 5% in the
networking layer alone. Note that this requires systm.h to be included
in any file that uses these functions otherwise it won't be able to
find them during the load.
* Fixed incorrect call to splx() in if_is.c
* Fixed bogus variable assignment to splx() in if_ed.c
