This is required in order to build on non-FreeBSD systems without setting
all the XAR/XSTRINGS/etc. variables
Reviewed By: emaste
Differential Revision: https://reviews.freebsd.org/D16771
- Implement use_first_pass, allowing expose_password to be used by other
service functions than pam_auth() without prompting a second time.
- Don't prompt for a password during pam_setcred().
PR: 238041
MFC after: 3 weeks
Currently RTLD is linked against libc_nossp_pic which means that any libc
symbol used in rtld can pull in a lot of depedencies. This was causing
symbol such as __libc_interposing and all the pthread stubs to be included
in RTLD even though they are not required. It turns out most of these
dependencies can easily be avoided by providing overrides inside of rtld.
This change is motivated by CHERI, where we have an experimental ABI that
requires additional relocation processing to allow the use of function
pointers inside of rtld. Instead of adding this self-relocation code to
RTLD I attempted to remove most function pointers from RTLD and discovered
that most of them came from the libc dependencies instead of being actually
used inside rtld.
A nice side-effect of this change is that rtld is now 22% smaller on amd64.
text data bss dec hex filename
0x21eb6 0xce0 0xe60 145910 239f6 /home/alr48/ld-elf-x86.before.so.1
0x1a6ed 0x728 0xdd8 113645 1bbed /home/alr48/ld-elf-x86.after.so.1
The number of R_X86_64_RELATIVE relocations that need to be processed on
startup has also gone down from 368 to 187 (almost 50% less).
Reviewed By: kib
Differential Revision: https://reviews.freebsd.org/D20663
Since we can now add OpenPGP trust anchors at runtime,
ensure the latent support is available.
Ensure we do not add duplicate keys to trust store.
Also allow reporting names of trust anchors added/revoked
We only do this for loader and only after initializing trust store.
Thus only changes to initial trust store will be logged.
Reviewed by: stevek
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D20700
devices are enumerated regardless of of the LIBUSB_HOTPLUG_ENUMERATE
flag. Make sure when the flag is not specified no arrival events are
generated for currently enumerated devices.
MFC after: 3 days
Sponsored by: Mellanox Technologies
Further cleanup after r349380; loader and kernel will both ignore canmount
on the root dataset as well, so we should not be so strict about it when
mounting it. be_mount is restructured to make it more clear that depth==0 is
special, and to not try fetching these properties that we won't care about.
MFC after: 3 days
Other parts of libbe(3) were fairly strict on the mountpoint property of the
BE dataset, and be_mount was not much better. It was improved in r347027 to
allow mountpoint=none for depth==0, but this bit was still sensitive to
mountpoint != / and mountpoint != none. Given that other parts of libbe(3)
no longer restrict the mountpoint property here, and the rest of the base
system is generally OK and will assume that a BE is mounted at /, let's do
the same.
Reported by: ler
MFC after: 3 days
NANDFS has been broken for years. Remove it. The NAND drivers that
remain are for ancient parts that are no longer relevant. They are
polled, have terrible performance and just for ancient arm
hardware. NAND parts have evolved significantly from this early work
and little to none of it would be relevant should someone need to
update to support raw nand. This code has been off by default for
years and has violated the vnode protocol leading to panics since it
was committed.
Numerous posts to arch@ and other locations have found no actual users
for this software.
Relnotes: Yes
No Objection From: arch@
Differential Revision: https://reviews.freebsd.org/D20745
Summary:
PowerPC has two PLT models: BSS-PLT and Secure-PLT. BSS-PLT uses runtime
code generation to generate the PLT stubs. Secure-PLT was introduced with
GCC 4.1 and Binutils 2.17 (base has GCC 4.2.1 and Binutils 2.17), and is a
more secure PLT format, using a read-only linkage table, with the dynamic
linker populating a non-executable index table.
This is the libc, rtld, and kernel support only. The toolchain and build
parts will be updated separately.
Reviewed By: nwhitehorn, bdragon, pfg
Differential Revision: https://reviews.freebsd.org/D20598
MFC after: 1 month
This is in preparation for compiling these files as part of rtld (which is
built with WARNS=6). See https://reviews.freebsd.org/D20663 for more details.
Latter is undesired when including <sys/param.h> according to style(9)
Submitted by: Faraz Vahedi
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D20637
In the case of mmap(), add a HISTORY section. Mention that mmap() and
mprotect()'s documentation predates an implementation. The
implementation first saw wide use in 4.3-Reno, but there seems to be no
easy way to express that in mdoc so stick with 4.4BSD.
Reviewed by: emaste
Requested by: cem
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D20713
A new macro PROT_MAX() alters a protection value so it can be OR'd with
a regular protection value to specify the maximum permissions. If
present, these flags specify the maximum permissions.
While these flags are non-portable, they can be used in portable code
with simple ifdefs to expand PROT_MAX() to 0.
This change allows (e.g.) a region that must be writable during run-time
linking or JIT code generation to be made permanently read+execute after
writes are complete. This complements W^X protections allowing more
precise control by the programmer.
This change alters mprotect argument checking and returns an error when
unhandled protection flags are set. This differs from POSIX (in that
POSIX only specifies an error), but is the documented behavior on Linux
and more closely matches historical mmap behavior.
In addition to explicit setting of the maximum permissions, an
experimental sysctl vm.imply_prot_max causes mmap to assume that the
initial permissions requested should be the maximum when the sysctl is
set to 1. PROT_NONE mappings are excluded from this for compatibility
with rtld and other consumers that use such mappings to reserve
address space before mapping contents into part of the reservation. A
final version this is expected to provide per-binary and per-process
opt-in/out options and this sysctl will go away in its current form.
As such it is undocumented.
Reviewed by: emaste, kib (prior version), markj
Additional suggestions from: alc
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D18880
rename the source to gsb_crc32.c.
This is a prerequisite of unifying kernel zlib instances.
PR: 229763
Submitted by: Yoshihiro Ota <ota at j.email.ne.jp>
Differential Revision: https://reviews.freebsd.org/D20193
This is for an upcoming change that fixes .depend handling in here.
It will cause some duplicate sources which need to be trimmed out.
MFC after: 2 weeks
Sponsored by: DellEMC
The man page claims that with O_FSYNC (aka O_SYNC) the kernel will not cache
written data. However, that's not true. Nor does POSIX require it.
Perhaps it was true when that section of the man page was written in r69336
(I haven't checked). But it's not true now. Now the effect is simply that
writes are sent to disk immediately and synchronously, but they're still
cached.
See also: https://pubs.opengroup.org/onlinepubs/9699919799/
See also: ffs_write in sys/ufs/ffs/ffs_vnops.c
Reviewed by: cem
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20641
libunwind and openmp to the upstream release_80 branch r363030
(effectively, 8.0.1 rc2). The 8.0.1 release should follow this within a
week or so.
MFC after: 2 weeks
Sync libarchive with vendor.
Relevant vendor changes:
- check_symlinks_fsobj() without chdir() and fchdir()
- bsdtar.1 manpage fixes
- patches from OpenBSD to libarchive_fe/passphrase.c
- version bumped to 3.4.0
MFC after: 2 weeks
configuration descriptor reads early on to avoid issues with devices
that don't check for a valid USB configuration read request.
Submitted by: takahiro.kurosawa@gmail.com
PR: 238412
MFC after: 3 days
port number, properly access them by their IPv6 names.
This will make it easier to slice up and compile out address families
in the future.
No functional change intended.
MFC after: 6 weeks
To facilitate experimentation with LTO we require an ar that supports
LLVM IR, and to a lesser degree also an nm. As a first step always
install llvm-ar and llvm-nm.
Sponsored by: The FreeBSD Foundation
As depicted in the comment: jid 0 always exists, but the lookup will fail as
it does not appear in the kernel's alljails list being a special jail. Some
callers will expect/rely on this, and we have no reason to lie because it
does always exist.
Reported by: Stefan Hegnauer <stefan.hegnauer gmx ch>
MFC after: soon (regression, breaks inspecting jail host bits, partial
revert)
ASAN reports become a lot more useful with llvm-symbolizer in $PATH, and the
build is not much more time-consuming. The added benefit is that the
resulting reports will actually include symbol information; without, thread
trace information includes a bunch of addresses that immediately resolve to
an inline function in
^/contrib/compiler-rt/lib/sanitizer_common/sanitizer_common.h and take a
little more effort to examine.
Reviewed by: emaste
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D20484
Ensure the expected result is stored first in a volatile variable with
the desired type. This makes all the tests succeed.
Slightly changed from the original pull request, but functionally the
same.
Obtained from: https://github.com/freebsd/freebsd/pull/401
Submitted by: Moritz Buhl <gh@moritzbuhl.de>
PR: 191676
MFC after: 3 days
lib/atf/libatf-c/tests/Makefile added the -Wno-duplicate-decl-specifier
due to an issue with an old version of ATF. ATF has long since been
updated to a version with the fix so the workaround is no longer
necessary.
Found during review for PR 236889.
PR: 236889
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Currently, if jail_getid(3) is passed in a numeric string, it assumes that
this is a jid string and passes it back converted to an int without checking
that it's a valid/existing jid. This breaks consumers that might use
jail_getid(3) to see if it can trivially grab a jid from a name if that name
happens to be numeric but not actually the name/jid of the jail. Instead of
returning -1 for the jail not existing, it'll return the int version of the
input and the consumer will not fallback to trying other methods.
Pass the numeric input to jail_get(2) as the jid for validation, rather than
the name. This works well- the kernel enforces that jid=name if name is
numeric, so doing the safe thing and checking numeric input as a jid will
still DTRT based on the description of jail_getid.
Reported by: Wes Maag
Reviewed by: jamie, Wes Maag
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D20388
- Triple DES has been formally deprecated in Kerberos (RFC 8429)
and is soon to be deprecated in IPsec (RFC 8221).
- Blowfish is deprecated. FreeBSD doesn't support its successor
(Twofish).
- MD5 is generally considered a weak digest that has known attacks.
geli refuses to create new volumes using these algorithms via 'geli
init'. It also warns when attaching to existing volumes or creating
temporary volumes via 'geli onetime' . The plan is to fully remove
support for these algorithms in FreeBSD 13.
Note that none of these algorithms have ever been the default
algorithm used by geli(8). Users would have had to explicitly select
these algorithms when creating volumes in the past.
Reviewed by: cem, delphij
MFC after: 3 days
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D20344
Use the .PATH mechanism instead so keep installing them from lib/libc/gen
While here revert 347961 and 347893 which are no longer needed
Discussed with: manu
Tested by: manu
ok manu@
