reclamation synchronously from get_pv_entry() instead of
asynchronously as part of the page daemon. Additionally, limit the
reclamation to inactive pages unless allocation from the PV entry zone
or reclamation from the inactive queue fails. Previously, reclamation
destroyed mappings to both inactive and active pages. get_pv_entry()
still, however, wakes up the page daemon when reclamation occurs. The
reason being that the page daemon may move some pages from the active
queue to the inactive queue, making some new pages available to future
reclamations.
Print the "reclaiming PV entries" message at most once per minute, but
don't stop printing it after the fifth time. This way, we do not give
the impression that the problem has gone away.
Reviewed by: tegge
nearly identical to wintel/ia32, with a couple of tweaks. Since it is
so similar to ia32, it is optionally added to a i386 kernel. This
port is preliminary, but seems to work well. Further improvements
will improve the interaction with syscons(4), port Linux nforce driver
and future versions of the xbox.
This supports the 64MB and 128MB boxes. You'll need the most recent
CVS version of Cromwell (the Linux BIOS for the XBOX) to boot.
Rink will be maintaining this port, and is interested in feedback.
He's setup a website http://xbox-bsd.nl to report the latest
developments.
Any silly mistakes are my fault.
Submitted by: Rink P.W. Springer rink at stack dot nl and
Ed Schouten ed at fxq dot nl
This hasn't been true on i386 for at least a decade, probably longer, but
I'm too lazy to look up the exact year that PAE support was introduced.
Thus, this driver doesn't work on PAE.
X-MFC After: now
sio(4) will claim it. This change therefore only affects how ports
are handled when they are not claimed by sio(4), and in principle
will improve hardware support.
MFC after: 2 months
Previously, pvzone's initialization was split between pmap_init() and
pmap_init2(). This split initialization was the underlying cause of
some UMA panics during initialization. Specifically, if the UMA boot
pages was exhausted before the pvzone was fully initialized, then UMA,
through no fault of its own, would use an inappropriate back-end
allocator leading to a panic. (Previously, as a workaround, we have
increased the UMA boot pages.) Fortunately, there is no longer any
reason that pvzone's initialization cannot be completed in
pmap_init().
Eliminate a check for whether pv_entry_high_water has been initialized
or not from get_pv_entry(). Since pvzone's initialization is
completed in pmap_init(), this check is no longer needed.
Use cnt.v_page_count, the actual count of available physical pages,
instead of vm_page_array_size to compute the maximum number of pv
entries.
Introduce the vm.pmap.pv_entries tunable on alpha and ia64.
Eliminate some unnecessary white space.
Discussed with: tegge (item #1)
Tested by: marcel (ia64)
source is first enabled similar to how intr_event's now allocate ithreads
on-demand. Previously, we would map IDT vectors 1:1 to IRQs. Since we
only have 191 available IDT vectors for I/O interrupts, this limited us
to only supporting IRQs 0-190 corresponding to the first 190 I/O APIC
intpins. On many machines, however, each PCI-X bus has its own APIC even
though it only has 1 or 2 devices, thus, we were reserving between 24 and
32 IRQs just for 1 or 2 devices and thus 24 or 32 IDT vectors. With this
change, a machine with 100 IRQs but only 5 in use will only use up 5 IDT
vectors. Also, this change provides an API (apic_alloc_vector() and
apic_free_vector()) that will allow a future MSI interrupt source driver to
request IDT vectors for use by MSI interrupts on x86 machines.
Tested on: amd64, i386
fails, reclaim a pv entry by destroying a mapping to an inactive
page.
Change the format strings in many of the assertions that were recently
converted from PMAP_DIAGNOSTIC printf()s so that they are compatible
with PAE. Avoid unnecessary differences between the amd64 and i386
format strings.
- Prefer '_' to ' ', as it results in more easily parsed results in
memory monitoring tools such as vmstat.
- Remove punctuation that is incompatible with using memory type names
as file names, such as '/' characters.
- Disambiguate some collisions by adding subsystem prefixes to some
memory types.
- Generally prefer lower case to upper case.
- If the same type is defined in multiple architecture directories,
attempt to use the same name in additional cases.
Not all instances were caught in this change, so more work is required to
finish this conversion. Similar changes are required for UMA zone names.
drivers I started quite some time before.
Retire the old i386-only pcf driver, and activate the new general
driver that has been sitting in the tree already for quite some
time.
Build the i2c modules for sparc64 architectures as well (where I've
been developing all this on).
'device npx' (both of which aren't really optional right now) and
'device io' and 'device mem' (to preserve POLA for 4.x users upgrading
to 6.0) from GENERIC into DEFAULTS.
Requested by: scottl
Reviewed by: scottl
and increase flexibility to allow various different approaches to be tried
in the future.
- Split struct ithd up into two pieces. struct intr_event holds the list
of interrupt handlers associated with interrupt sources.
struct intr_thread contains the data relative to an interrupt thread.
Currently we still provide a 1:1 relationship of events to threads
with the exception that events only have an associated thread if there
is at least one threaded interrupt handler attached to the event. This
means that on x86 we no longer have 4 bazillion interrupt threads with
no handlers. It also means that interrupt events with only INTR_FAST
handlers no longer have an associated thread either.
- Renamed struct intrhand to struct intr_handler to follow the struct
intr_foo naming convention. This did require renaming the powerpc
MD struct intr_handler to struct ppc_intr_handler.
- INTR_FAST no longer implies INTR_EXCL on all architectures except for
powerpc. This means that multiple INTR_FAST handlers can attach to the
same interrupt and that INTR_FAST and non-INTR_FAST handlers can attach
to the same interrupt. Sharing INTR_FAST handlers may not always be
desirable, but having sio(4) and uhci(4) fight over an IRQ isn't fun
either. Drivers can always still use INTR_EXCL to ask for an interrupt
exclusively. The way this sharing works is that when an interrupt
comes in, all the INTR_FAST handlers are executed first, and if any
threaded handlers exist, the interrupt thread is scheduled afterwards.
This type of layout also makes it possible to investigate using interrupt
filters ala OS X where the filter determines whether or not its companion
threaded handler should run.
- Aside from the INTR_FAST changes above, the impact on MD interrupt code
is mostly just 's/ithread/intr_event/'.
- A new MI ddb command 'show intrs' walks the list of interrupt events
dumping their state. It also has a '/v' verbose switch which dumps
info about all of the handlers attached to each event.
- We currently don't destroy an interrupt thread when the last threaded
handler is removed because it would suck for things like ppbus(8)'s
braindead behavior. The code is present, though, it is just under
#if 0 for now.
- Move the code to actually execute the threaded handlers for an interrrupt
event into a separate function so that ithread_loop() becomes more
readable. Previously this code was all in the middle of ithread_loop()
and indented halfway across the screen.
- Made struct intr_thread private to kern_intr.c and replaced td_ithd
with a thread private flag TDP_ITHREAD.
- In statclock, check curthread against idlethread directly rather than
curthread's proc against idlethread's proc. (Not really related to intr
changes)
Tested on: alpha, amd64, i386, sparc64
Tested on: arm, ia64 (older version of patch by cognet and marcel)
other OSes (Solaris, Linux, VxWorks). It's not necessary to write a 0
to the config address register when using config mechanism 1 to turn
off config access. In fact, it can be downright troublesome, since it
seems to confuse the PCI-PCI bridge in the AMD8111 chipset and cause
it to sporadically botch reads from some devices. This is the cause
of the missing USP ports problem I was experiencing with my Sun Opteron
system.
Also correct the case for mechanism 2: it's only necessary to write
a 0 to the ENABLE port.
IPI_STOP IPIs.
- Change the i386 and amd64 MD IPI code to send an NMI if STOP_NMI is
enabled if an attempt is made to send an IPI_STOP IPI. If the kernel
option is enabled, there is also a sysctl to change the behavior at
runtime (debug.stop_cpus_with_nmi which defaults to enabled). This
includes removing stop_cpus_nmi() and making ipi_nmi_selected() a
private function for i386 and amd64.
- Fix ipi_all(), ipi_all_but_self(), and ipi_self() on i386 and amd64 to
properly handle bitmapped IPIs as well as IPI_STOP IPIs when STOP_NMI is
enabled.
- Fix ipi_nmi_handler() to execute the restart function on the first CPU
that is restarted making use of atomic_readandclear() rather than
assuming that the BSP is always included in the set of restarted CPUs.
Also, the NMI handler didn't clear the function pointer meaning that
subsequent stop and restarts could execute the function again.
- Define a new macro HAVE_STOPPEDPCBS on i386 and amd64 to control the use
of stoppedpcbs[] and always enable it for i386 and amd64 instead of
being dependent on KDB_STOP_NMI. It works fine in both the NMI and
non-NMI cases.
get a new pv under high system load where the available pv entries
have been exhausted before the pagedaemon has a chance to wake up
to reclaim some.
Prior to this, the NULL pointer dereference ended up causing
secondary panics with rather less than useful resulting tracebacks.
Reviewed by: alc, jhb
MFC after: 1 week
Fix a debugging printf to printf after a variable is first assigned,
not before.
These are purely build fixes, and need inspection to make sure they
were what the original author of the previous changes intended.
- Add newer CPUID definitions for future use.
Many thanks to Mike Tancsa <mike at sentex dot net> for providing test
cases for Intel Pentium D and AMD Athlon 64 X2.
Approved by: anholt (mentor)
originally wrote it for 4.x and hasn't really had the time to fully update
it to 5.x and later. Also, the author doesn't use the hardware anymore as
well. If someone does need this driver they can always resurrect it from
the Attic.
Requested by: Frank Mayhar frank at exit dot com
changes in MD code are trivial, before this change, trapsignal and
sendsig use discrete parameters, now they uses member fields of
ksiginfo_t structure. For sendsig, this change allows us to pass
POSIX realtime signal value to user code.
2. Remove cpu_thread_siginfo, it is no longer needed because we now always
generate ksiginfo_t data and feed it to libpthread.
3. Add p_sigqueue to proc structure to hold shared signals which were
blocked by all threads in the proc.
4. Add td_sigqueue to thread structure to hold all signals delivered to
thread.
5. i386 and amd64 now return POSIX standard si_code, other arches will
be fixed.
6. In this sigqueue implementation, pending signal set is kept as before,
an extra siginfo list holds additional siginfo_t data for signals.
kernel code uses psignal() still behavior as before, it won't be failed
even under memory pressure, only exception is when deleting a signal,
we should call sigqueue_delete to remove signal from sigqueue but
not SIGDELSET. Current there is no kernel code will deliver a signal
with additional data, so kernel should be as stable as before,
a ksiginfo can carry more information, for example, allow signal to
be delivered but throw away siginfo data if memory is not enough.
SIGKILL and SIGSTOP have fast path in sigqueue_add, because they can
not be caught or masked.
The sigqueue() syscall allows user code to queue a signal to target
process, if resource is unavailable, EAGAIN will be returned as
specification said.
Just before thread exits, signal queue memory will be freed by
sigqueue_flush.
Current, all signals are allowed to be queued, not only realtime signals.
Earlier patch reviewed by: jhb, deischen
Tested on: i386, amd64
previous revision only restored the MP optimization.
Describe the optimization strategy for TLB invalidations in a comment.
Reviewed by: ups@
MFC after: 3 days
TLB shootdown requirements. Otherwise a CPU may not get the needed
TLB invalidation.
The PTE valid and access flags can not be used here to avoid TLB
shootdowns unless sf->cpumask == all_cpus.
( Otherwise some CPUs may still hold an even older entry in the TLB)
Since sf_buf_alloc mappings are normally always used this is
also not really useful and presetting accessed and modified
allows the CPU to speculatively load the entry into the TLB.
Both bugs can cause random data corruption.
MFC after: 3 days
o Axe poll in trap.
o Axe IFF_POLLING flag from if_flags.
o Rework revision 1.21 (Giant removal), in such a way that
poll_mtx is not dropped during call to polling handler.
This fixes problem with idle polling.
o Make registration and deregistration from polling in a
functional way, insted of next tick/interrupt.
o Obsolete kern.polling.enable. Polling is turned on/off
with ifconfig.
Detailed kern_poll.c changes:
- Remove polling handler flags, introduced in 1.21. The are not
needed now.
- Forget and do not check if_flags, if_capenable and if_drv_flags.
- Call all registered polling handlers unconditionally.
- Do not drop poll_mtx, when entering polling handlers.
- In ether_poll() NET_LOCK_GIANT prior to locking poll_mtx.
- In netisr_poll() axe the block, where polling code asks drivers
to unregister.
- In netisr_poll() and ether_poll() do polling always, if any
handlers are present.
- In ether_poll_[de]register() remove a lot of error hiding code. Assert
that arguments are correct, instead.
- In ether_poll_[de]register() use standard return values in case of
error or success.
- Introduce poll_switch() that is a sysctl handler for kern.polling.enable.
poll_switch() goes through interface list and enabled/disables polling.
A message that kern.polling.enable is deprecated is printed.
Detailed driver changes:
- On attach driver announces IFCAP_POLLING in if_capabilities, but
not in if_capenable.
- On detach driver calls ether_poll_deregister() if polling is enabled.
- In polling handler driver obtains its lock and checks IFF_DRV_RUNNING
flag. If there is no, then unlocks and returns.
- In ioctl handler driver checks for IFCAP_POLLING flag requested to
be set or cleared. Driver first calls ether_poll_[de]register(), then
obtains driver lock and [dis/en]ables interrupts.
- In interrupt handler driver checks IFCAP_POLLING flag in if_capenable.
If present, then returns.This is important to protect from spurious
interrupts.
Reviewed by: ru, sam, jhb
can be enabled by enabling COUNT_IPIS in smptests.h. When enabled, each
CPU provides an interrupt counter for nearly all of the IPIs it receives
(IPI_STOP currently doesn't have a counter) that can be examined using
vmstat -i, etc.
MFC after: 3 days
Requested by: rwatson
and do some preparations for handling 12x22 fonts (currently lots of code
implies and/or hardcodes a font width of 8 pixels). This will be required
on sparc64 which uses a default font size of 12x22 in order to add font
loading and saving support as well as to use a syscons(4)-supplied mouse
pointer image.
This API breakage is committed now so it can be MFC'ed in time for 6.0
and later on upcoming framebuffer drivers destined for use on sparc64
and which are expected to rely on using font loading internally and on
a syscons(4)-supplied mouse pointer image can be easily MFC'ed to
RELENG_6 rather than requiring a backport.
Tested on: i386, sparc64, make universe
MFC after: 1 week
osf1_signal.c:1.41, amd64/amd64/trap.c:1.291, linux_socket.c:1.60,
svr4_fcntl.c:1.36, svr4_ioctl.c:1.23, svr4_ipc.c:1.18, svr4_misc.c:1.81,
svr4_signal.c:1.34, svr4_stat.c:1.21, svr4_stream.c:1.55,
svr4_termios.c:1.13, svr4_ttold.c:1.15, svr4_util.h:1.10,
ext2_alloc.c:1.43, i386/i386/trap.c:1.279, vm86.c:1.58,
unaligned.c:1.12, imgact_elf.c:1.164, ffs_alloc.c:1.133:
Now that Giant is acquired in uprintf() and tprintf(), the caller no
longer leads to acquire Giant unless it also holds another mutex that
would generate a lock order reversal when calling into these functions.
Specifically not backed out is the acquisition of Giant in nfs_socket.c
and rpcclnt.c, where local mutexes are held and would otherwise violate
the lock order with Giant.
This aligns this code more with the eventual locking of ttys.
Suggested by: bde
variable and returns the previous value of the variable.
Tested on: i386, alpha, sparc64, arm (cognet)
Reviewed by: arch@
Submitted by: cognet (arm)
MFC after: 1 week
as they both interact with the tty code (!MPSAFE) and may sleep if the
tty buffer is full (per comment).
Modify all consumers of uprintf() and tprintf() to hold Giant around
calls into these functions. In most cases, this means adding an
acquisition of Giant immediately around the function. In some cases
(nfs_timer()), it means acquiring Giant higher up in the callout.
With these changes, UFS no longer panics on SMP when either blocks are
exhausted or inodes are exhausted under load due to races in the tty
code when running without Giant.
NB: Some reduction in calls to uprintf() in the svr4 code is probably
desirable.
NB: In the case of nfs_timer(), calling uprintf() while holding a mutex,
or even in a callout at all, is a bad idea, and will generate warnings
and potential upset. This needs to be fixed, but was a problem before
this change.
NB: uprintf()/tprintf() sleeping is generally a bad ideas, as is having
non-MPSAFE tty code.
MFC after: 1 week
