Toolchain components were historically statically linked. They became
normal dynamically linked executables in commit 6ab18ea64d. There is
no need to keep a special case build option for the toolchain; users who
want statically linked toolchain (or any other) components can use the
existing NO_SHARED knob.
Reviewed by: dim, sjg
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D41266
This option is a blanket for all the DTrace-related software. The option
when enabled passes in -fsanitize=address -fsanitize=undeifned, enabling
ASAN and UBSAN in the following components:
- libdtrace
- dtrace(1)
- lockstat(1)
- plockstat(1)
The option defaults to "no" and is intended as a developer aid.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D41157
Enable LIB32 option on aarch64, defaulting to YES; it had defaulted
to "broken". Add required variables for how to compile lib32 on
arm. Use /usr/include/arm for armv7 (32-bit) headers, analogous to
/usr/include/i386 on amd64. Omit libomp from lib32; it is not
supported on armv7.
Reviewed by: jrtc27
Differential Revision: https://reviews.freebsd.org/D40945
This patch fixes a bug which prevents building libthr without
_PTHREADS_INVARIANTS defined. The default remains to build libthr
with -D_PTHREADS_INVARIANTS. However, with this patch, if one builds
libthr with WITHOUT_PTHREADS_ASSERTIONS=true then the latency to
acquire+release a default pthread mutex is reduced by roughly 5%, and a
robust mutex by roughly 18% (as measured by a simple synthetic test on a
Xeon E5-2697a based machine).
Reviewed by: jhb, kib, mjg
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D40900
At this point CAPSICUM and CASPER are merely forced on via the newly
added __REQUIRED_OPTIONS list; after stable/14 branches I'll sweep
the tree for MK_{CAPSICUM,CASPER}.
This change will not be MFCed.
Discussed on: freebsd-arch
Differential Revision: https://reviews.freebsd.org/D40592
Options on this list will be forced to 'yes'. This is intended for use
as a transitional measure when an option is ceasing to be optional,
before all of the associated make logic is removed.
Differential Revision: https://reviews.freebsd.org/D40590
We're never going to support EFI booting on i386 (32-bit). Start to
decommission it, since it's never worked.
Sponsored by: Netflix
Reviewed by: tsoome, emaste
Differential Revision: https://reviews.freebsd.org/D40011
Prior to 590461a4b8 installation of include files was controlled
directly by ${MK_TOOLCHAIN}. 590461a4b8 added an INCLUDES knob
defaulting to YES. Setting WITHOUT_TOOLCHAIN forced it off to retain
existing behaviour.
Decouple them now, as there are reasonable use cases for installing
libraries and include files without a compiler or other tool chain
components.
Reviewed by: imp, jrtc27
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D39918
For DIRDEPS_BUILD we need Makefile.depend.options to
force libegacy to be built on older FreeBSD and non-FreeBSD hosts.
Add readpassphrase to libegacy to avoid the need for libbsd on Linux
src.opts.mk disable TESTS for host if MK_host_egacy is yes
Reviewed by: imp
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D39766
Rather than having a tool in the FreeBSD base system for obtaining
the FreeBSD ports tree, users are encouraged to `pkg install git`
and then `git clone https://git.FreeBSD.org/ports.git /usr/ports`.
The portsnap servers will continue operating until FreeBSD 13 reaches
its End-of-Life, and portsnap is available from the ports tree as
ports-mgmt/portsnap.
Requested by: portmgr
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D39563
X-MFC: no
NETLINK was added along side NETLINK_SUPPORT to control building netlink
specific programs, but it has no consumers so remove it for now.
Reviewed by: melifaro
Differential Revision: https://reviews.freebsd.org/D39678
This does not remove LLVM_TARGET_MIPS. Note that the only
MACHINE_ARCH values ending in 'hf' were all MIPS architectures, hence
removing the pattern matches for 'hf'.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D39331
Make userland tools such as netstat, route, arp and ndp use
either netlink or rtsock interfaces based on the NETLINK_SUPPORT
options.
Both NETLINK and NETLINK_SUPPORT options are turned on by default.
Reviewed By: eugen
Differential Revision: https://reviews.freebsd.org/D39148
This will build etdump, makefs and mkimg as bootstrap tools to allow
easily creating disk images. Note that etdump is bootstrapped due to its
use in the release scripts for building ISO images.
Reviewed by: emaste, arichardson
Differential Revision: https://reviews.freebsd.org/D39072
Mark ZFS broken here too, add comment about why. Add comments about
OFED being disabled on 32-bit arm, add comment about why too.
Sponsored by: Netflix
Remove redundant CPUARCH test: we really just want a plain MACHINE_ARCH
here.
Second, always turn off LOADER_ZFS when we turn off ZFS. Not 100%
required, but we did it some places and not others. There's no current
mechanism to say that if X is disabled then X_Y must be too.
Sponsored by: Netflix
With the removal of NgATM it no longer controls anything.
Reviewed by: manu, emaste
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D38882
NDIS was removed a couple of years ago, but the src.conf knob was left
behind.
Fixes: bfc99943b0 ("ndis(4): remove as previous announced")
Sponsored by: The FreeBSD Foundation
Where options exist in both src.opts.mk and kern.opts.mk they should be
kept in sync.
It may be that the option should be flipped the other way (e.g.,
enabling OFED in the kernel on arm64); if so that will be done as a
subsequent commit after further testing.
PR: 269994
Reviewed by: imp
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D38952
Where options exist in both src.opts.mk and kern.opts.mk they should be
kept in sync.
PR: 269994
Reviewed by: imp
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D38935
ATM is an old technology, remove build of related programs by default
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D38844
Reviewed by: brooks, imp, emaste
Summary:
This review ports mlx5 driver, kernel's OFED stack (userland is already enabled), KTLS and krping to powerpc64 and powerpc64le.
krping requires a small change since it uses assembly for amd64 / i386.
NOTE: On powerpc64le RDMA works fine in the userspace with libmlx5, but on powerpc64 it does not. The problem is that contrib/ofed/libmlx5/doorbell.h checks for SIZEOF_LONG but this macro exists on neither powerpc64* nor amd64. Thus, the file silently goes to the fallback function written for 32-bit architectures. It works fine on little-endian architectures, but causes a hard fail on big-endian. It's possible it may also cause some runtime issues on little-endian.
Thus, on powerpc64 I verified that RDMA works with krping.
Reviewers: #powerpc, hselasky
Subscribers: bdrewery, imp, emaste, jhibbits
Differential Revision: https://reviews.freebsd.org/D38786
Summary:
This review ports mlx5 driver, kernel's OFED stack (userland is already enabled), KTLS and krping to powerpc64 and powerpc64le.
krping requires a small change since it uses assembly for amd64 / i386.
NOTE: On powerpc64le RDMA works fine in the userspace with libmlx5, but on powerpc64 it does not. The problem is that contrib/ofed/libmlx5/doorbell.h checks for SIZEOF_LONG but this macro exists on neither powerpc64* nor amd64. Thus, the file silently goes to the fallback function written for 32-bit architectures. It works fine on little-endian architectures, but causes a hard fail on big-endian. It's possible it may also cause some runtime issues on little-endian.
Thus, on powerpc64 I verified that RDMA works with krping.
Reviewers: #powerpc, hselasky
Subscribers: bdrewery, imp, emaste, jhibbits
Differential Revision: https://reviews.freebsd.org/D38786
Several important base system components are written in C++, and the
WITHOUT_CXX option produced a system that was not fully functional.
Just accept this, and remove the option to build without C++ support.
This reverts commit adc3c128c6.
Reviewed by: brooks, kevans, jhb (earlier)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33108
Add some extra customization points so that FreeBSD build
can be adapted to local requirements.
We use these to minimize changes to share/mk
Reviewed by: stevek
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D37617
A small reduction in build infrastructure complexity; when we had both
Clang and GCC in the tree it was useful to have both built, and choose
one or the other to install as /usr/bin/cc. Now only Clang is in the
tree, and there is no point in building and installing base Clang but
not providing it as cc (and c++, cpp).
Reviewed by: imp
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D37075
libc++ requires C++20, so mark C++ (MK_CXX) as broken if the compiler
does not support C++20.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D36893
Remove support for booting off of firewire, and for having dcons via
firewire in the loader. Kernel support for these things is unchanged.
Discussed on arch@ and the current state is not working (and the build
was wrong to boot).
Sponsored by: Netflix
Discussed: https://lists.freebsd.org/archives/freebsd-arch/2022-November/000267.html
Reviewed by: kevans, melifaro, emaste
Differential Revision: https://reviews.freebsd.org/D37334
This is the last part for ARM64 Hyper-V enablement. This includes
commone files and make file changes to enable the ARM64 FreeBSD
guest on Hyper-V. With this patch, it should be able to build
the ARM64 image and install it on Hyper-V.
Reviewed by: emaste, andrew, whu
Tested by: Souradeep Chakrabarti <schakrabarti@microsoft.com>
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D36744
Summary:
This knob can be used to make buildsystem prefer generic C implentations of
various functions, instead of machine-specific assembler ones.
Test Plan: `make buildworld` on amd64
Reviewed by: imp, emaste
Differential Revision: https://reviews.freebsd.org/D36076
MFC after: 3 days
Add an option to enable/disable DTrace without disabling ZFS. New
architectures such as CHERI may support ZFS before they support DTrace
and the old model of WITHOUT_CDDL disabling both wasn't helpful.
For compatiblity, the CDDL option remains and WITHOUT_CDDL implies
WITHOUT_DTRACE. WITHOUT_DTRACE also implies WITHOUT_CTF.
As part of this change, largely convert cddl/*/Makefile to using the
more compact SUBDIR.${MK_<FOO>}+= form rather than using intermediate
variables.
Reviewed by: markj
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D35718
Get amd64 compiling. However, the current kboot supports an old way of
enumerating memory and the new way needs to be incorporated as well. The
powerpc folks could use either, it seems and newer powerpc platforms
need some changes for kboot to work anyway.
This commit includes the linker script, trampoline code to start the new
kernel, Linux system calls and the necessary configuration glue needed
to build the binaries.
This includes a quick hack to get multiboot support, but we need to
really share these defines. The multiiboot2.h is the minimum needed to
build. We have multiboot information in three places now, so a
refactoring is in order.
This should be considered, at best, preliminary and experimental for
anybody wishing to try it out.
Sponsored by: Netflix
Reviewed by: tsoome
Differential Revision: https://reviews.freebsd.org/D35100
LLDB currently defaults to enabled on all architectures except arm and
riscv64 (and can probably be enabled for 32-bit arm). Switch to an
opt-out list.
Reviewed by: pkubaj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34218
While mlx5 is not yet enabled on powerpc64le, cxgbe is.
The binary seems to work properly.
Differential revision: https://reviews.freebsd.org/D34026
Reviewed by: emaste
While LLDB on powerpc and powerpcspe builds as-is, on powerpc64 and
powerpc64le it requires adding a couple of additional source files
to build.
Differential review: https://reviews.freebsd.org/D34043
Approved by: dim, imp, emaste
libsoft was a transition from the FreeBSD/armv6 10 (and earlier) with
'softfp' ABI (that is, hardware float, but passed as integer registers)
to the 'hardfp' ABI that was in FreeBSD/armv[67] in FreeBSD 11 and
newer. It's been off by default since it was created.
This was mostly used by people that wanted to do a source upgrade of
their system from FreeBSD 10 to 11 or from 11-current before the cutover
to 11-current after. This should not be confused with the full software
floating point implementation (that doesn't use the hardware floating
point instructions at all) that is used out of tree by at least one
company selling armv7 gear that has no FPU.
There's no longer a need for the transition, so retire it like should
likely have happened sometime before FreeBSD 12 was released 3 years
ago.
Sponsored by: Netflix
Suggestions by: jrtc27, jhb
Reviewed by: manu, mmel
Differential Revision: https://reviews.freebsd.org/D33761
Mips had a number of special cases that disabled features that didn't
work. Remove them all. However, retain the llvm mips bits because that
requires a lot more effort to unwind and will be done separately.
Sponsored by: Netflix
