to NO of course). Provide a basic ruleset file, rc.bsdextended, but allow
the filename to be overridden through rc.conf.
Discussed with: rwatson (awhile ago)
1M blocks and optionally write the read data to a file or disk.
If a read error happens, the 1M block gets put on the end of the worklist
and will be retried with 64k blocksize.
If a read error happens again, the 64k block gets put at the end of the
worklist and will be retried with single sector reads.
The program keeps trying until you stop it.
You can refresh a disk:
recoverdisk /dev/ad1 /dev/ad1
or salvage a floppy:
recoverdisk /dev/fd0 myfloppy.flp
1. Update text about later BINDs using a pseudo-random, unpriviliged
query port for UDP by default.
2. We are now running in a sandbox by default, with a dedicated dump
directory, so remove the stale comment.
3. The topology configuration is not for the faint of heart, so
remove the commented example.
4. Tighten up some language a bit.
5. s/secondary/slave/
6. No need for the example about a bind-owned directory for slave zones.
7. Change domain.com to example.com in the example, per RFC 2606.
8. Update the path for slave zones in the example.
- Thanks to Scot Hetzel <swhetzel@gmail.com>
There is more work to do here, but this is an improvement.
This changes the naming of USB serial devices to: /dev/ttyU%d and
/dev/cuaU%d for call-in and call-out devices respectively. (Please
notice: capital 'U')
Please also note that we now have .init and .lock devices for USB
serial ports. These are not persistent across device removal. devd(8)
can be used to configure them on attachment time.
These changes also improve the chances of the system surviving if
the USB device is unplugged at an inconvenient time. At least we
do not rip things apart while there are any threads in the device
driver anymore.
Remove cdevsw, rely on the tty generic one.
Don't make_dev(), use ttycreate() which does all the magic.
In detach, do close procesing if we ripped things apart
while the device was open. Call ttyfree() once we're done
cleaning up.
generic way. This code will allow a similar amount of code to be
removed from most if not all serial port drivers.
Add generic cdevsw for tty devices.
Add generic slave cdevsw for init/lock devices.
Add ttypurge function which wakes up all know generic sleep
points in the tty code, and calls into the hw-driver if it
provides a method.
Add ttycreate function which creates tty device and optionally
cua device. In both cases .init/.lock devices are created
as well.
Change ttygone() slightly to also call the hw driver provided
purge routine.
Add ttyfree() which will purge and destroy the cdevs.
Add ttyconsole mode for setting console friendly termios
on a port.
is one, detect mbuf loops and stop, add an extra arg so you can only print
the first x bytes of the data per mbuf (print all if arg is -1), print
flags using %b (bitmask)...
No code in the tree appears to use m_print, and it's just a maner of adding
-1 as an additional arg to m_print to restore original behavior..
MFC after: 4 days
select(2), and discovered to my horror that ugen(4)'s bulk in/out support
is horribly lobotomized. Bulk transfers are done using the synchronous
API instead of the asynchronous one. This causes the following broken
behavior to occur:
- You open the bulk in/out ugen device and get a descriptor
- You create some other descriptor (socket, other device, etc...)
- You select on both the descriptors waiting until either one has
data ready to read
- Because of ugen's brokenness, you block in usb_bulk_transfer() inside
ugen_do_read() instead of blocking in select()
- The non-USB descriptor becomes ready for reading, but you remain blocked
on select()
- The USB descriptor becomes ready for reading
- Only now are you woken up so that you can ready data from either
descriptor.
The result is select() can only wake up when there's USB data pending. If
any other descriptor becomes ready, you lose: until the USB descriptor
becomes ready, you stay asleep.
The correct approach is to use async bulk transfers, so I changed
the read code to use the async bulk transfer API. I left the write
side alone for now since it's less of an issue.
Note that the uscanner driver has the same brokenness in it.
to 7422 since it appears that the 8169S can't transmit anything larger..
The 8169S can receive full jumbo frames, but we don't have an mru to let
the upper layers know this...
add fixup so that this driver should work on alignment constrained platforms
(!i386 && !amd64)
MFC after: 5 days
MAXWIN to the register window manipulation functions - rwindow_load()
calls rwindow_save() so this one addition should take care of both.
This should help find places that pcb_nsaved doesn't get initialized
properly.
Suggested by: jake
by default when named is enabled. Also, improve our default directory
layout by creating /var/named/etc/namedb/{master|slave} directories,
and use the former for the generated localhost* files.
Rather than using pax to copy device entries, mount devfs in the
chroot directory.
There may be some corner cases where things need to be adjusted,
but overall this structure has been well tested on a production
network, and should serve the needs of the vast majority of users.
UPDATING has instructions on how to do the conversion for those
with existing configurations.
standing ability to list a non-existant device in /etc/ttys to keep it
from dying. This is a documented feature of init(8):
The init utility can also be used to keep arbitrary daemons running,
automatically restarting them if they die. In this case, the first field
in the ttys(5) file must not reference the path to a configured device
node and will be passed to the daemon as the final argument on its com-
mand line. This is similar to the facility offered in the AT&T System V
UNIX /etc/inittab.
So rather than fix the man page to 'break' this feature, back out the change.
At the time this change was made, people felt that the spamage from
getty was annoying on headless consoles. Andrew Gallatin noted:
> Most of my machines are headless without video cards and use a serial
> console. With devfs this means that /dev/ttyv[1-N] do not exist and
> getty bitches like this:
>
> Sep 26 11:00:11 monet getty[543]: open /dev/ttyv1: No such file or directory
and we went off and applied this hack rather than fixing getty to
sleep forever when it gets an unknown device, as was Andrew's other
suggestion. Since it breaks things, I'm off to do that instead.
but it is possible:
1. Read data from good component for synchronization.
2. Write data to the same area.
3. Write synchronization data, which are now stale.
Found by: tegge (for gmirror)
on anything but DEVFS and in this case it was not even used (see below).
Put the NFS4 vop method for fifo's behind "#if 0" because it is unused.
Add a XXX comment to say that I think the unusedness is a bug.
considered an error according to the Open Group Base Specification.
PR: standards/45738
Submitted by: Matthias Andree <matthias.andree@web.de>
MFC after: 3 days
for the new thread. The rest of the fields in the pcb wind up being
written to before they're read as a normal part of the pcb usage but
this field may be read upon return to userland, having it be uninitialized
garbage is bad.
Submitted by: Andrew Belashov (bel at orel dot ru)
Reviewed by: jake
MFC after: 3 days
NO_BIND_DNSSEC, NO_BIND_ETC, NO_BIND_NAMED, and NO_BIND_UTILS.
2. Make creation of directories in /usr/include that are only needed
in the WITH_BIND_LIBS case conditional.
Reviewed by: ru, des
