Commit Graph

95 Commits

Author SHA1 Message Date
Max Laier
affc907d0c Replace IF_HANDOFF with new IFQ_HANDOFF to enqueue with ALTQ once enabled on
the respective drivers.
2004-06-15 23:57:42 +00:00
Luigi Rizzo
cd46a114fc This commit does two things:
1. rt_check() cleanup:
    rt_check() is only necessary for some address families to gain access
    to the corresponding arp entry, so call it only in/near the *resolve()
    routines where it is actually used -- at the moment this is
    arpresolve(), nd6_storelladdr() (the call is embedded here),
    and atmresolve() (the call is just before atmresolve to reduce
    the number of changes).
    This change will make it a lot easier to decouple the arp table
    from the routing table.

    There is an extra call to rt_check() in if_iso88025subr.c to
    determine the routing info length. I have left it alone for
    the time being.

    The interface of arpresolve() and nd6_storelladdr() now changes slightly:
     + the 'rtentry' parameter (really a hint from the upper level layer)
       is now passed unchanged from *_output(), so it becomes the route
       to the final destination and not to the gateway.
     + the routines will return 0 if resolution is possible, non-zero
       otherwise.
     + arpresolve() returns EWOULDBLOCK in case the mbuf is being held
       waiting for an arp reply -- in this case the error code is masked
       in the caller so the upper layer protocol will not see a failure.

2. arpcom untangling
    Where possible, use 'struct ifnet' instead of 'struct arpcom' variables,
    and use the IFP2AC macro to access arpcom fields.
    This mostly affects the netatalk code.

=== Detailed changes: ===
net/if_arcsubr.c
   rt_check() cleanup, remove a useless variable

net/if_atmsubr.c
   rt_check() cleanup

net/if_ethersubr.c
   rt_check() cleanup, arpcom untangling

net/if_fddisubr.c
   rt_check() cleanup, arpcom untangling

net/if_iso88025subr.c
   rt_check() cleanup

netatalk/aarp.c
   arpcom untangling, remove a block of duplicated code

netatalk/at_extern.h
   arpcom untangling

netinet/if_ether.c
   rt_check() cleanup (change arpresolve)

netinet6/nd6.c
   rt_check() cleanup (change nd6_storelladdr)
2004-04-25 09:24:52 +00:00
Luigi Rizzo
49572c5b0d arpcom untangling:
- use ifp instead if &ac->ac_if in a couple of nd6* calls;
   this removes a useless dependency.

 - use IFP2AC(ifp) instead of an extra variable to point to the struct arpcom;
   this does not remove the nesting dependency between arpcom and ifnet but
   makes it more evident.
2004-04-24 21:59:41 +00:00
Luigi Rizzo
4158372f1a replace Bcmp() with the same bcmp() used in the rest of the file. 2004-04-18 11:01:15 +00:00
Luigi Rizzo
212b6d5244 + rename and document an unused field in struct arpcom (field is still
there so there are no ABI changes);
+ replace 5 redefinitions of the IPF2AC macro with one in if_arp.h

Eventually (but before freezing the ABI) we need to get rid of
struct arpcom (initially with the help of some smart #defines
to avoid having to touch each and every driver, see below).

Apart from the struct ifnet, struct arpcom now only stores a copy
of the MAC address (ac_enaddr, but we already have another copy in
the struct ifnet -- if_addrhead), and a netgraph-specific field
which is _always_ accessed through the ifp, so it might well go
into the struct ifnet too (where, besides, there is already an entry
for AF_NETGRAPH data...)

Too bad ac_enaddr is widely referenced by all drivers. But
this can be fixed as follows:

#define ac_enaddr       ac_if.the_original_ac_enaddr_in_struct_ifnet

(note that the right hand side would likely be a pointer rather than
the base address of an array.)
2004-04-18 01:15:32 +00:00
Luigi Rizzo
7395ff5cff whoops, forgot to fix these places where arpresolve() was used
Detected by: tinderbox
2004-04-04 11:52:09 +00:00
Matthew N. Dodd
43a6c75a7a Handle AF_ARP in *_output()
Obtained from:	NetBSD
2004-03-14 05:24:54 +00:00
Robert Watson
e589108ddf Const-poison ethernet and FDDI broadcast address constants, as they
are accessed read-only.
2004-03-09 23:55:59 +00:00
Andre Oppermann
9188b4a169 Introduce ip_fastforward and remove ip_flow.
Short description of ip_fastforward:

 o adds full direct process-to-completion IPv4 forwarding code
 o handles ip fragmentation incl. hw support (ip_flow did not)
 o sends icmp needfrag to source if DF is set (ip_flow did not)
 o supports ipfw and ipfilter (ip_flow did not)
 o supports divert, ipfw fwd and ipfilter nat (ip_flow did not)
 o returns anything it can't handle back to normal ip_input

Enable with sysctl -w net.inet.ip.fastforwarding=1

Reviewed by:	sam (mentor)
2003-11-14 21:02:22 +00:00
Warner Losh
39efe73c15 Remove unnecessary (caddr_t) casts of if_broadcastaddr. 2003-10-23 17:47:55 +00:00
Matthew N. Dodd
04b269f5fe - Use IFP2AC().
- Support IFF_MONITOR.
- Borrow some consistency for if_input() routines from if_ethersubr.c.
- Correct comments regarding fddi_input() that no longer apply.
2003-03-16 00:17:44 +00:00
Matthew N. Dodd
59d776b808 Use if_printf(). 2003-03-15 23:02:36 +00:00
Matthew N. Dodd
0c61d694a8 Update interface statistics after MAC and IFF_UP|IFF_RUNNING checks. 2003-03-15 21:51:39 +00:00
Matthew N. Dodd
06f684b004 Reduce code differences. 2003-03-15 19:37:44 +00:00
Matthew N. Dodd
fd87fbf6b8 - Remove definition of senderr() from iso88025.h.
- Use definition of senderr() from if_ethersubr.c.
2003-03-15 19:10:19 +00:00
Matthew N. Dodd
fe7e109c6f Re-order and prune includes. 2003-03-15 16:37:28 +00:00
Matthew N. Dodd
67df65de97 Formatting and whitespace changes. 2003-03-15 15:09:11 +00:00
Peter Wemm
3c6b084e96 Finish driving a stake through the heart of netns and the associated
ifdefs scattered around the place - its dead Jim!

The SMB stuff had stolen AF_NS, make it official.
2003-03-05 19:24:24 +00:00
Jonathan Lemon
1cafed3941 Update netisr handling; Each SWI now registers its queue, and all queue
drain routines are done by swi_net, which allows for better queue control
at some future point.  Packets may also be directly dispatched to a netisr
instead of queued, this may be of interest at some installations, but
currently defaults to off.

Reviewed by: hsu, silby, jayanth, sam
Sponsored by: DARPA, NAI Labs
2003-03-04 23:19:55 +00:00
Matthew N. Dodd
797f247b51 sizeof(struct llc) -> LLC_SNAPFRAMELEN
sizeof(struct ether_header) -> ETHER_HDR_LEN
 sizeof(struct fddi_header) -> FDDI_HDR_LEN
2003-03-03 05:04:57 +00:00
Matthew N. Dodd
7f760c4890 Reduce code duplication. This adds the function rt_check() to route.c.
Approved by:	 sam (in principle)
2003-03-02 21:34:37 +00:00
Warner Losh
a163d034fa Back out M_* changes, per decision of the TRB.
Approved by: trb
2003-02-19 05:47:46 +00:00
Alfred Perlstein
44956c9863 Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.
2003-01-21 08:56:16 +00:00
Sam Leffler
6fc32a2495 network interface and link layer changes:
o on input don't strip the Ethernet header from packets
o input packet handling is now done with if_input
o track changes to ether_ifattach/ether_ifdetach API
o track changes to bpf tapping
o call ether_ioctl for default handling of ioctl's
o use constants from net/ethernet.h where possible

Reviewed by:	many
Approved by:	re
2002-11-15 00:00:15 +00:00
Brooks Davis
29e1b85f97 Use if_printf(ifp, "blah") instead of
printf("%s%d: blah", ifp->if_name, ifp->if_xname).
2002-10-21 02:51:56 +00:00
Robert Watson
4141b621ac When a packet is sent via a FDDI interface, perform appropriate MAC
transmission checks; when it is received, label the packet appropriately.
Although we don't have a local FDDI setup to test this with, the
labeling and checks are identical to other interface classes.

Obtained from:	TrustedBSD Project
Sponsored by:	DARPA, Network Associates Laboratories
2002-10-20 22:27:59 +00:00
Poul-Henning Kamp
8d3574c7a4 Fix some harmless mis-indents.
Spotted by:	FlexeLint
2002-10-01 15:48:31 +00:00
Matthew N. Dodd
0e93a9b535 - Merge the pdq driver (if_fpa and if_fea) from NetBSD.
Among other things this gets us ifmedia support.
- Update fddi_ifattach() to take an additional argument.
2002-03-29 11:22:22 +00:00
Matthew N. Dodd
c772c98600 - Define fddibroadcastaddr in if_fddisubr.c.
- Add fddi_ifdetach() and fddi_ioctl().
2002-03-29 10:40:35 +00:00
Matthew N. Dodd
3880eed1bc - Use ifp->if_broadcastaddr when possible.
- Remove unnecessary preprocessor conditional.
2002-03-29 10:29:10 +00:00
Matthew N. Dodd
1874a92527 - Add a comment.
- Whitespace.
- Remove forgotten duplicate assignments in fddi_ifattach().
2002-03-29 10:23:42 +00:00
Matthew N. Dodd
11b0248c66 - Update interface statistics on error conditions.
- Make sure the interface is UP and RUNNING in fddi_input().
- Reorder and comment packet tests in fddi_input().
- Call if_attach() in fddi_ifattach().
- Test for a valid return from ifaddr_byindex().
2002-03-29 10:17:06 +00:00
Matthew N. Dodd
071c2e5cc2 - Whitespace changes.
- Formatting.
- Use macro, not magic numbers.
- Move a dropanyway label in fddi_input() to end of function.
2002-03-29 09:52:01 +00:00
Matthew N. Dodd
98db21b9c7 Back a small part of the last patch. 2002-03-29 09:41:03 +00:00
Matthew N. Dodd
c427e90a6d - Simplify first arg of nd6_storelladdr().
- Use struct fddi_header where appropriate.
- Use bcopy() rather than memcpy().
- Use FDDI_ADDR_LEN macro instead of ETHER_ADDR_LEN macro.
- Add loadable module support.
2002-03-29 09:37:56 +00:00
Matthew N. Dodd
a98be5ef31 - Use net/fddi.h rather than netinet/if_fddi.h.
- Use FDDI_ADDR_LEN rather than a magic number or a sizeof().
- Hide distracting sizeof() behind FDDI_HDR_LEN macro.
- Don't use sizeof(struct llc) in areas where we mean LLC_SNAPFRAMELEN.
2002-03-29 08:51:42 +00:00
Matthew N. Dodd
005a5dfbe9 Remove unnecessary LLC defines and use the standard ones. 2002-03-29 08:14:29 +00:00
Matthew N. Dodd
7fc55739a7 - style(9) fixes for 'return'.
- retire RTALLOC1 and ARPRESOLVE macros.
- use IFP2AC to hide discracting casts.
2002-03-29 08:04:36 +00:00
Matthew N. Dodd
28c9592779 Un-ifdef. 2002-03-29 07:30:22 +00:00
Matthew N. Dodd
c0ffddede1 De-register. 2002-03-29 07:12:10 +00:00
Bruce Evans
34fe62c776 Fixed some style bugs in the removal of __P(()). The main ones were
not removing tabs before "__P((", and not outdenting continuation lines
to preserve non-KNF lining up of code with parentheses.  Switch to KNF
formatting and/or rewrap the whole prototype in some cases.
2002-03-24 09:34:04 +00:00
Alfred Perlstein
929ddbbb89 Remove __P. 2002-03-19 21:54:18 +00:00
Max Khon
322dcb8d3d bring in ARP support for variable length link level addresses
Reviewed by:	jdp
Approved by:	jdp
Obtained from:	NetBSD
MFC after:	6 weeks
2001-10-14 20:17:53 +00:00
Jonathan Lemon
f9132cebdc Wrap array accesses in macros, which also happen to be lvalues:
ifnet_addrs[i - 1]  -> ifaddr_byindex(i)
        ifindex2ifnet[i]    -> ifnet_byindex(i)

This is intended to ease the conversion to SMPng.
2001-09-06 02:40:43 +00:00
Jonathan Lemon
08aadfbb98 Do not perform arp send/resolve on an interface marked NOARP.
PR: 25006
MFC after: 2 weeks
2001-06-15 21:00:32 +00:00
Bosko Milekic
fef5fd2315 Plug several mbuf leaks in error cases (in nd6)
Submitted by: jhay
2001-03-11 05:31:45 +00:00
Poul-Henning Kamp
fc2ffbe604 Mechanical change to use <sys/queue.h> macro API instead of
fondling implementation details.

Created with: sed(1)
Reviewed by: md5(1)
2001-02-04 13:13:25 +00:00
Poul-Henning Kamp
22f2982675 Use <sys/queue.h> macro api rather than fondle its implementation detals.
Created with:	/usr/bin/sed
Reviewed by:	/sbin/md5
2001-02-03 11:46:35 +00:00
Bosko Milekic
2a0c503e7a * Rename M_WAIT mbuf subsystem flag to M_TRYWAIT.
This is because calls with M_WAIT (now M_TRYWAIT) may not wait
  forever when nothing is available for allocation, and may end up
  returning NULL. Hopefully we now communicate more of the right thing
  to developers and make it very clear that it's necessary to check whether
  calls with M_(TRY)WAIT also resulted in a failed allocation.
  M_TRYWAIT basically means "try harder, block if necessary, but don't
  necessarily wait forever." The time spent blocking is tunable with
  the kern.ipc.mbuf_wait sysctl.
  M_WAIT is now deprecated but still defined for the next little while.

* Fix a typo in a comment in mbuf.h

* Fix some code that was actually passing the mbuf subsystem's M_WAIT to
  malloc(). Made it pass M_WAITOK instead. If we were ever to redefine the
  value of the M_WAIT flag, this could have became a big problem.
2000-12-21 21:44:31 +00:00
Jonathan Lemon
df5e198723 Lock down the network interface queues. The queue mutex must be obtained
before adding/removing packets from the queue.  Also, the if_obytes and
if_omcasts fields should only be manipulated under protection of the mutex.

IF_ENQUEUE, IF_PREPEND, and IF_DEQUEUE perform all necessary locking on
the queue.  An IF_LOCK macro is provided, as well as the old (mutex-less)
versions of the macros in the form _IF_ENQUEUE, _IF_QFULL, for code which
needs them, but their use is discouraged.

Two new macros are introduced: IF_DRAIN() to drain a queue, and IF_HANDOFF,
which takes care of locking/enqueue, and also statistics updating/start
if necessary.
2000-11-25 07:35:38 +00:00