rather than a voltag name, do not set the CESR_VOLTAGS flags in the
CHIOGSTATUS command requesting the current status. As voltags are an
optional feature that must be handled as "reserved" by media changers
not implementing the feature, always setting CESR_VOLTAGS resulted in
the command being aborted with an `Invalid field in CDB', and
consequently the "chio return" failed, for media changers that do not
support voltags.
MFC after: 1 week
mutex, as it's rarely changed but frequently accessed read-only from
multiple threads, so a potentially significant source of contention.
MFC after: 1 month
Sponsored by: Apple, Inc.
capabilities reported by the ap. These need to be cross-checked
against the local configuration in the vap. Previously we were
only checking the ap capabilities which meant that if an ap reported
it was ff-capable but we were not setup to use them we'd try to do
ff aggregation and drop the frame.
There are a number of problems to be fixed here but applying this
fix immediately as the problem causes all traffic to stop (and has
not workaround).
Reported by: Ashish Shukla
in the system. A simple heuristics is used to detect what is "enough"
memory: if number of physmem pages is greater than 32k (equalling 128 MB
on machines with 4 kB pages).
Typical immediate result of these changes is reduction in context switches
and the goal is to increase efficiency by using large buffers:
before: /usr/bin/time -hlp cat file1 > file2
...
163 voluntary context switches
11194 involuntary context switches
after: /usr/bin/time -hlp ./cat file1 > file2
...
417 voluntary context switches
272 involuntary context switches
Reviewed by: hackers@ (no objections to earlier version of cat patch)
Approved by: gnn (mentor)
MFC after: 4 months
access control checks in mac_bsdextended are not in the same
namespace as the MBI_ flags used in ugidfw policies, so add an
explicit conversion routine to get from one to the other.
Obtained from: TrustedBSD Project
one zombie process because it does not do the cleanup. For a long running
NIS/YP server, it will have lots of zombie processes on it. Fix that by
ignoring the SIGCHLD signal since we don't really care about the exit
status in this case.
PR: bin/91980
Reported by: Arjan van der Velde <dj_noresult at hotmail.com>
Submitted by: Jui-Nan Lin" <jnlin at csie.nctu.edu.tw>
Reviewed by: delphij
MFC after: 1 month
sdhci supports up to 65535 blocks transfers, at91_mci - one block.
Enable multiblock operations disabled before to follow at91_mci driver
limitations.
Reviewed by: imp@
dump of detected ULE CPU topology. This dump can be used to check the
topology detection and for general system information.
An example of CPU topology dump is:
kern.sched.topology_spec: <groups>
<group level="1" cache-level="0">
<cpu count="8" mask="0xff">0, 1, 2, 3, 4, 5, 6, 7</cpu>
<flags></flags>
<children>
<group level="2" cache-level="0">
<cpu count="4" mask="0xf">0, 1, 2, 3</cpu>
<flags></flags>
</group>
<group level="2" cache-level="0">
<cpu count="4" mask="0xf0">4, 5, 6, 7</cpu>
<flags></flags>
</group>
</children>
</group>
</groups>
Reviewed by: jeff
Approved by: gnn (mentor)
while doing the block store workaround so we restore the correct
floating-point registers state in case of nested floating-point
operations resulting from nested interrupts. This allows the
VIS-based block copy/zero functions to be used on machines
requiring this workaround. Alternatively, we could take care of
saving the floating-point registers here, which would be more
inefficiently though and also involves turning off interrupts.
- It turns out that the SCZ_PCI_DMA_SYNC register doesn't work
like the TOMXMS_PCI_DMA_SYNC_PEND one (but more like the
corresponding register in of Hummingbird and Sabre bridges)
and writing the INO of the respective device to it causes a
Safari bus error. However, due to the Schizo errata I-23,
SCZ_PCI_DMA_SYNC can't be used as intended either, so remove
consistent DMA syncing for Schzio bridges for now, which means
that add-on cards with non-"sun4u compliant" (whatever that
means exactly) PCI-PCI-bridges should be avoided until the
proper workaround is implemented. [1]
Reported by: Michael Moll [1]
This should fix q_time overflow, which happens after 2^32/(86400*hz) days of
uptime (~50days for hz = 1000).
q_time overflow cause following:
- traffic shaping may not work in 'fast' mode (not enabled by default).
- incorrect average queue length calculation in RED/GRED algorithm.
NB: due to ABI change this change is not applicable to stable.
PR: kern/128401
to add more V* constants, and the variables changed by this patch were often
being assigned to mode_t variables, which is 16 bit.
Approved by: rwatson (mentor)
memory mappings when the MAC label on a process changes, to
mac_proc_vm_revoke(),
It now also acquires its own credential reference directly from the
affected process rather than accepting one passed by the the caller,
simplifying the API and consumer code.
Obtained from: TrustedBSD Project
vpollinfo with vnode interlock. Fully initialize vpollinfo before putting
pointer to it into vp->v_pollinfo.
Discussed with: dwhite
Tested by: pho
MFC after: 1 week
that they operate directly on credentials: mac_proc_create_swapper(),
mac_proc_create_init(), and mac_proc_associate_nfsd(). Update policies.
Obtained from: TrustedBSD Project
be a no-op request, and why this might have to change if we want to allow
leaving a partition someday.
Obtained from: TrustedBSD Project
MFC after: 3 days
As discussed on the commits list, there is no need to call revoke()
inside openpty(). On RELENG_6 and RELENG_7 unlockpt() will call
revoke(). On HEAD we create pseudo-terminals on demand, so there is no
need to revoke the slave device node.
This change should never be MFC'd, because the implementation we have in
RELENG_6 and RELENG_7 should work flawlessly with older versions of
libc.
Discussed with: jhb
MFC after: never
"ticks" goes negative. This breaks the signed comparison in softclock.
This causes sleep() to never wake up, tcp to stop, etc etc. This is
bad(TM). Use the SEQ_LT() method from tcp's sequence number comparisons.
