Commit Graph

824 Commits

Author SHA1 Message Date
Ed Schouten
a6c26592f1 Extend libteken to support CJK fullwidth characters.
Introduce a new formatting bit (TF_CJK_RIGHT) that is set when putting a
cell that is the right part of a CJK fullwidth character. This will
allow drivers like vt(9) to support fullwidth characters properly.

emaste@ has a patch to extend vt(9)'s font handling to increase the
number of Unicode -> glyph maps from 2 ({normal,bold)} to 4
({normal,bold} x {left,right}). This will need to use this formatting
bit to determine whether to draw the left or right glyph.

Reviewed by:	emaste
2013-12-20 21:31:50 +00:00
Mark Murray
f02e47dc1e Snapshot. This passes the build test, but has not yet been finished or debugged.
Contains:

* Refactor the hardware RNG CPU instruction sources to feed into
the software mixer. This is unfinished. The actual harvesting needs
to be sorted out. Modified by me (see below).

* Remove 'frac' parameter from random_harvest(). This was never
used and adds extra code for no good reason.

* Remove device write entropy harvesting. This provided a weak
attack vector, was not very good at bootstrapping the device. To
follow will be a replacement explicit reseed knob.

* Separate out all the RANDOM_PURE sources into separate harvest
entities. This adds some secuity in the case where more than one
is present.

* Review all the code and fix anything obviously messy or inconsistent.
Address som review concerns while I'm here, like rename the pseudo-rng
to 'dummy'.

Submitted by:	Arthur Mesh <arthurmesh@gmail.com> (the first item)
2013-10-04 06:55:06 +00:00
Jung-uk Kim
ba53f0d5ca Reload font when syscons(4) is resuming without switching mode.
Reported by:	adrian (more than a year ago)
Prodded by:	adrian (less than a month ago)
2013-07-17 23:29:56 +00:00
Konstantin Belousov
1dc72d3681 On some generations of the Intel GPU, disabling of the VGA Display
stops updating the vertical retrace indicator.  The text mouse
renderer in syscons is executing from the callout and spins waiting
for the start of next frame.  As result, after the X server finishes,
since the VGA cannot be turned on, but syscons does not know about
this, the clock swi spins forever.

Hack around the problem by disabling wait for the retrace if KMS is
activated.

Diagnosed and tested by:	Michiel Boland <boland37@xs4all.nl>
Sponsored by:	The FreeBSD Foundation
MFC after:	2 weeks
2013-06-18 20:19:09 +00:00
Davide Italiano
6b98f11545 MFcalloutng (r244249, r244306 by mav):
- Switch syscons from timeout() to callout_reset_flags() and specify that
precision is not important there -- anything from 20 to 30Hz will be fine.
- Reduce syscons "refresh" rate to 1-2Hz when console is in graphics mode
and there is nothing to do except some polling for keyboard.  Text mode
refresh would also be nice to have adaptive, but this change at least
should help laptop users who running X.

Sponsored by:	Google Summer of Code 2012, iXsystems inc.
Tested by:	flo, marius, ian, markj, Fabian Keil
2013-03-04 14:00:58 +00:00
Hans Petter Selasky
68fdacf7c5 Make sure that all mouse buttons are released when clients
using /dev/consolectl close. This fixes a problem where if
a USB mouse is detached while a button is pressed, that
button is never released.

MFC after:	1 week
2013-02-06 11:16:18 +00:00
Ed Schouten
305921c48e Add tty_set_winsize().
This removes some of the signalling magic from the Syscons driver and
puts it in the TTY layer, where it belongs.
2012-11-03 22:21:37 +00:00
Oleksandr Tymoshenko
e1f04cd024 Piggyback MIPS changes and add ARM syscons support for devices with
framebuffer

While here - sort #if defined() order alphabetically
2012-08-25 23:59:31 +00:00
Robert Watson
8122a592ee Provide basic glue to allow syscons to be used on MIPS, modelled
on PowerPC support.  This was clearly not something syscons was
designed to do (very specific assumptions about the nature of VGA
consoles on PCs), but fortunately others have long since blazed
the way on making it work regardless of that.

Sponsored by:	DARPA, AFRL
2012-08-25 08:09:37 +00:00
Hans Petter Selasky
d1eacc02f1 Move tty_opened_ns() into syscons.c which is currently the
only client of this macro.

Suggested by:	ed @
MFC after:	1 week
2012-03-29 15:47:29 +00:00
Hans Petter Selasky
8dbeb1b6cc Fix for NULL-pointer panic during boot, if keys are pressed too early.
MFC after:	1 week
2012-03-29 14:53:14 +00:00
Ulrich Spörlein
9a14aa017b Convert files to UTF-8 2012-01-15 13:23:18 +00:00
Andriy Gapon
b133becced sc_cngrab: switch to console vty when possible
In the future we may want to perform the switch even if the console is
currently in the graphics mode by trying to reset the video adapter first
(e.g. by executing vesa/vga bios post).  That would probably require
some sort of a one-way flag as returning the control of the console back
to the interrupted application most likely would result in a mess.

Reviewed by:	emaste
MFC after:	2 months
2011-12-21 12:21:22 +00:00
Andriy Gapon
8f3ae92165 syscons: provide a first iteration of cngrab/cnungrab implementation
- put underlying keyboard(s) into the polling mode for the whole
  duration of the grab, instead of the previous behavior of going into
  and out of the polling mode around each polling attempt
- ditto for setting K_XLATE mode and enabling a disabled keyboard

Inspired by:	bde
MFC after:	2 months
2011-12-17 15:57:39 +00:00
Andriy Gapon
9976156f12 kern cons: introduce infrastructure for console grabbing by kernel
At the moment grab and ungrab methods of all console drivers are no-ops.

Current intended meaning of the calls is that the kernel takes control of
console input.  In the future the semantics may be extended to mean that
the calling thread takes full ownership of the console (e.g. console
output from other threads could be suspended).

Inspired by:	bde
MFC after:	2 months
2011-12-17 15:08:43 +00:00
Andriy Gapon
8538a18594 syscons: make sc_puts static as it is used only privately
Perhaps sc_puts should also be renamed to scputs to follow the implied
naming conventions in the file...

MFC after:	2 weeks
2011-12-11 21:10:11 +00:00
Ed Schouten
6472ac3d8a Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs.
The SYSCTL_NODE macro defines a list that stores all child-elements of
that node. If there's no SYSCTL_DECL macro anywhere else, there's no
reason why it shouldn't be static.
2011-11-07 15:43:11 +00:00
Robert Millan
a2c22d416d Add a few improvements to utf-8 -> cp436 console map
(mostly with Catalan characters in mind, but it probably
benefits other languages).

The new mappings are as follows:

▮ -> █
ÀÈÍÏÓÒÚ -> AEIIOOU
ŀ / Ŀ -> l / L

Reviewed by:	ed
Approved by:	kib (mentor)
2011-10-28 20:00:30 +00:00
Kip Macy
8451d0dd78 In order to maximize the re-usability of kernel code in user space this
patch modifies makesyscalls.sh to prefix all of the non-compatibility
calls (e.g. not linux_, freebsd32_) with sys_ and updates the kernel
entry points and all places in the code that use them. It also
fixes an additional name space collision between the kernel function
psignal and the libc function of the same name by renaming the kernel
psignal kern_psignal(). By introducing this change now we will ease future
MFCs that change syscalls.

Reviewed by:	rwatson
Approved by:	re (bz)
2011-09-16 13:58:51 +00:00
Robert Watson
a608af7817 Add support for alternative break-to-debugger to syscons(4). While most
keyboards allow console break sequences (such as ctrl-alt-esc) to be
entered, alternative break can prove useful under virtualisation and
remote console systems where entering control sequences can be
difficult or unreliable.

MFC after:	3 weeks
Approved by:	re (bz)
2011-08-27 22:10:45 +00:00
Robert Watson
4cf7545589 Attempt to make break-to-debugger and alternative break-to-debugger more
accessible:

(1) Always compile in support for breaking into the debugger if options
    KDB is present in the kernel.

(2) Disable both by default, but allow them to be enabled via tunables
    and sysctls debug.kdb.break_to_debugger and
    debug.kdb.alt_break_to_debugger.

(3) options BREAK_TO_DEBUGGER and options ALT_BREAK_TO_DEBUGGER continue
    to behave as before -- only now instead of compiling in
    break-to-debugger support, they change the default values of the
    above sysctls to enable those features by default.  Current kernel
    configurations should, therefore, continue to behave as expected.

(4) Migrate alternative break-to-debugger state machine logic out of
    individual device drivers into centralised KDB code.  This has a
    number of upsides, but also one downside: it's now tricky to release
    sio spin locks when entering the debugger, so we don't.  However,
    similar logic does not exist in other device drivers, including uart.

(5) dcons requires some special handling; unlike other console types, it
    allows overriding KDB's own debugger selection, so we need a new
    interface to KDB to allow that to work.

GENERIC kernels in -CURRENT will now support break-to-debugger as long as
appropriate boot/run-time options are set, which should improve the
debuggability of BETA kernels significantly.

MFC after:	3 weeks
Reviewed by:	kib, nwhitehorn
Approved by:	re (bz)
2011-08-26 21:46:36 +00:00
Ed Schouten
78d4d8eeb2 Restore binary compatibility for GIO_KEYMAP and PIO_KEYMAP.
Back in 2009 I changed the ABI of the GIO_KEYMAP and PIO_KEYMAP ioctls
to support wide characters. I created a patch to add ABI compatibility
for the old calls, but I didn't get any feedback to that.

It seems now people are upgrading from 8 to 9 they experience this
issue, so add it anyway.
2011-07-17 08:19:19 +00:00
Ed Schouten
7c9669276e Fix whitespace inconsistencies in the TTY layer and its drivers owned by me. 2011-06-26 18:26:20 +00:00
Jung-uk Kim
b10c3d1c15 Move VT switching hack for suspend/resume from bus drivers to syscons.c
using event handlers.  A different version was

Submitted by:	Taku YAMAMOTO (taku at tackymt dot homeip dot net)
2011-05-09 18:46:49 +00:00
Jung-uk Kim
1658038ce7 Rename a variable to match scvidctl.c. 2010-11-30 17:34:15 +00:00
Jung-uk Kim
732e8e1632 Stop hardcoding default font size. 2010-11-30 17:32:28 +00:00
Jung-uk Kim
fd7a9ebcca Clean up code a bit to make it more readable. 2010-11-30 16:46:15 +00:00
Jung-uk Kim
82515b4f1f Clean up code a bit to make it more readable. 2010-11-29 22:20:44 +00:00
Jung-uk Kim
0cb06f72d5 Honor font size for the video mode when default fonts are compiled in kernel
and VESA mode is enabled from loader.
2010-11-29 22:19:19 +00:00
Rebecca Cran
b1ce21c6ef Fix typos.
PR:	bin/148894
Submitted by:	olgeni
2010-11-09 10:59:09 +00:00
Rui Paulo
cd1fa5bd4d Explicitly tell the compiler that we don't care about the return value
of kbdd_ioctl().
2010-10-13 11:37:12 +00:00
Jung-uk Kim
a90b8833d2 Rework r210248. Although it fixed most of problems, it did not fix one
particular edge case where X-axis resolution is not multiple of font width.
Now we just advance enough scan lines, then deduct a partial scan line.
It is more intuitive than the previous code.  Apply the same wisdom to EGA
and VGA planar renderers for consistency.

Reported by:	David DEMELIER (demelier dot david at gmail dot com)
2010-09-17 23:09:31 +00:00
Jung-uk Kim
25a14f561c Improve style slightly. 2010-07-19 20:31:04 +00:00
Jung-uk Kim
490770af47 Fix two long-standing line wrapping bugs in VGA renderer for pixel mode.
Font size may be smaller than 16 and logical scan line may be larger than
the displayed scan line.

MFC after:	3 days
2010-07-19 18:56:18 +00:00
Jung-uk Kim
dd962f5b8a Suspend screen updates when the video controller is powered down. 2010-05-22 07:35:17 +00:00
Jung-uk Kim
3504769505 Correct beastie_saver module name. 2010-04-07 18:42:21 +00:00
Jung-uk Kim
3cab2f6db9 Add the official FreeBSD logo image file for logo_saver. 2010-04-07 17:07:06 +00:00
Jung-uk Kim
f989dcca3e Copy Beastie image file to prepare for an official logo image. 2010-04-07 17:03:05 +00:00
Jung-uk Kim
4cc5f38e97 Refine r204265. We want the standard VGA palette for packed pixel mode. 2010-03-29 22:41:30 +00:00
Jung-uk Kim
c2bce7cc39 Align memory access of 24-bit pixel renderer to word boundary. 2010-03-24 15:40:18 +00:00
Jung-uk Kim
4d52abfb0c Separate 24-bit pixel draw from 32-bit case. Although it is slower, we do
not want to write a useless zero to inaccessible memory region.
2010-03-23 22:16:57 +00:00
Jung-uk Kim
4a9b63a454 Improve VESA mode switching via loader tunable `hint.sc.0.vesa_mode'.
The most notable change is history buffer is fully saved/restored now.
2010-02-24 20:13:34 +00:00
Jung-uk Kim
8d521790d0 Yet another attempt to make palette loading more safer:
- Add a separate palette data for 8-bit DAC mode when SC_PIXEL_MODE is set
and fill it up with default gray-scale palette data for text.  Now we don't
have to set `hint.sc.0.vesa_mode' to get the default palette data.
- Add a new adapter flag, V_ADP_DAC8 to track whether the controller is
using 8-bit palette format and load correct palette when switching modes.
- Set 8-bit DAC mode only for non-VGA compatible graphics mode.
2010-02-23 21:51:14 +00:00
Ivan Voras
b8bba24e06 The New and Improved snake_server - Service Pack 1: now even more
sensitive to load average variations!
2010-02-23 15:27:07 +00:00
Ivan Voras
c0414ca779 Upgrade the "snake" syscons screensaver to the new, multimedia version!
Now, with color! And system load averages!

Amused by it:	gnn
2010-02-23 15:12:41 +00:00
Robert Noland
cfd7bacef2 Update d_mmap() to accept vm_ooffset_t and vm_memattr_t.
This replaces d_mmap() with the d_mmap2() implementation and also
changes the type of offset to vm_ooffset_t.

Purge d_mmap2().

All driver modules will need to be rebuilt since D_VERSION is also
bumped.

Reviewed by:	jhb@
MFC after:	Not in this lifetime...
2009-12-29 21:51:28 +00:00
Ed Schouten
5b19140604 Include <sys/ttydefaults.h>, instead of doing it through <sys/termios.h>.
I want to prevent the header polution of <sys/termios.h> eventually.
2009-11-28 16:25:55 +00:00
Konstantin Belousov
07ff915720 Fix pgsignal() call after signature change in r199355.
Reported and tested by:	bf1783 googlemail com
MFC after:	1 month
2009-11-17 19:24:26 +00:00
Ed Schouten
4b2361f811 Convert syscons on i386 to TERM=xterm.
TEKEN_XTERM is now gone. Because we always use xterm mode now, we only
need a TEKEN_CONS25 switch to go back to cons25.
2009-11-13 11:28:54 +00:00
Ed Schouten
e42fc36867 Switch the default terminal emulation style to xterm for most platforms.
Right now syscons(4) uses a cons25-style terminal emulator. The
disadvantages of that are:

- Little compatibility with embedded devices with serial interfaces.
- Bad bandwidth efficiency, mainly because of the lack of scrolling
  regions.
- A very hard transition path to support for modern character sets like
  UTF-8.

Our terminal emulation library, libteken, has been supporting
xterm-style terminal emulation for months, so flip the switch and make
everyone use an xterm-style console driver.

I still have to enable this on i386. Right now pc98 and i386 share the
same /etc/ttys file. I'm not going to switch pc98, because it uses its
own Kanji-capable cons25 emulator.

IMPORTANT: What to do if things go wrong (i.e. graphical artifacts):

- Run the application inside script(1), try to reduce the problem and
  send me the log file.
- In the mean time, you can run `vidcontrol -T cons25' and `export
  TERM=cons25' so you can run applications the same way you did before.
  You can also build your kernel with `options TEKEN_CONS25' to make all
  virtual terminals use the cons25 emulator by default.

Discussed on:	current@
2009-11-13 05:54:55 +00:00
Ed Schouten
3a8a07eadd Allow Syscons terminal emulators to provide function key strings.
xterm and cons25 have some incompatibilities when it comes to escape
sequences for special keys, such as F1 to F12, home, end, etc. Add a new
te_fkeystr() that can be used to override the strings.

scterm-sck won't do anything with this, but scterm-teken will use
teken_get_sequences() to obtain the proper sequence.
2009-11-11 08:20:19 +00:00
Jung-uk Kim
761eeb5fff Fix VESA color palette corruption:
- VBE 3.0 says palette format resets to 6-bit mode when video mode changes.
We simply set 8-bit mode when we switch modes if the adapter supports it.
- VBE 3.0 also says if the mode is not VGA compatible, we must use VBE
function to save/restore palette.  Otherwise, VGA function may be used.
Thus, reinstate the save/load palette functions only for non-VGA compatible
modes regardless of its palette format.
- Let vesa(4) set VESA modes even if vga(4) claims to support it.
- Reset default palette if VESA pixel mode is set initially.
- Fix more style nits.
2009-11-03 20:22:09 +00:00
Jung-uk Kim
974f3534c0 Search for default 800x600 graphics mode from supported VESA mode list.
Many video controllers do not support 800x600x24 mode any more.
2009-10-23 18:53:21 +00:00
Ed Schouten
53e69c0c2a Add support for VT200-style mouse input.
Right now if applications want to use the mouse on the command line,
they use sysmouse(4) and install a signal handler in the kernel to
deliver signals when mouse events arrive. This conflicts with my plan to
change to TERM=xterm, so implement proper VT200-style mouse input.

Because mouse input is now streamed through the TTY, it means you can
now SSH to another system on the console and use the mouse there as
well. The disadvantage of the VT200 mouse protocol, is that it doesn't
seem to generate events when moving the cursor. Only when pressing and
releasing mouse buttons.

There are different protocols as well, but this one seems to be most
commonly supported.

Reported by:	Paul B. Mahol <onemda gmail com>
Tested with:	vim(1)
2009-09-27 18:19:41 +00:00
Ed Schouten
56a4365bde Add 256 color support.
It is quite inconvenient that if an application for xterm uses 256 color
mode, text suddenly starts to blink (because of ;5; in the middle).
We'd better just implement 256 color mode and add a conversion routine
from 256 to 8 color mode, which doesn't seem to be too bad in practice.

Remapping colors is done quite simple. If one of the channels is most
actively represented, primary colors are used. If two channels are most
actively represented, secondary colors are used. If all three channels
are equal (gray), it picks between black and white.

Reported by:	Paul B. Mahol <onemda gmail com>
2009-09-26 15:26:32 +00:00
Ed Schouten
790dd1b5af Just use ttydisc_rint_simple() instead of doing it ourselves.
This code seems to do exactly the same as ttydisc_rint_simple() does
nowadays. Just remove it.

Obtained from:	//depot/user/ed/newcons/sys/dev/syscons/syscons.c
2009-09-18 15:39:09 +00:00
Ed Schouten
94dc815e34 Make sure we never place the cursor outside the screen.
For some vague reason, it may be possible that scp->cursor_pos exceeds
scp->ysize * scp->xsize. This means that teken_set_cursor() may get
called with an invalid position. Just ignore the old cursor position in
this case.

Reported by:	Paul B. Mahol <onemda gmail com>
MFC after:	1 month
2009-09-13 18:45:59 +00:00
Ed Schouten
87da28e914 Commit a change that I missed in the previous commit.
I ran `svn commit' in sys/teken/, instead of sys/.
2009-09-12 14:46:22 +00:00
Ed Schouten
e06d84fc49 Make 8-bit support run-time configurable.
Now to do the same for xterm support. This means people can eventually
toy around with xterm+UTF-8 without recompiling their kernel.
2009-09-12 10:34:34 +00:00
Xin LI
7ec7f6d5ed Make use of the more flexable device hints by adding a new field,
vesa_mode to specify VESA mode, as suggested by jhb@.
2009-09-12 00:12:47 +00:00
Xin LI
493d6f54bc Extend the usage of sc(4)'s hint variable 'flag'. Bit 0x80 now means
"set vesa mode" and higher 16bits of the flag would be the desired mode.

One can now set, for instance, hint.sc.0.flags=0x01680180, which means
that the system should set VESA mode 0x168 upon boot.

Submitted by:	paradox <ddkprog yahoo com>, swell k at gmail.com with
		some minor changes.
2009-09-11 02:07:24 +00:00
John Baldwin
9425bee7a0 Don't malloc a buffer while holding the prison0 mutex. Instead, use a loop
where we figure out the hostname length under the lock, malloc the buffer
with the lock dropped, then recheck the length under the lock and loop again
if the buffer is now too small.

Tested by:	Norbert Koch  nkoch  demig de
MFC after:	3 days
2009-09-10 12:58:37 +00:00
Xin LI
ee5e90dab2 - Teach vesa(4) and dpms(4) about x86emu. [1]
- Add vesa kernel options for amd64.
 - Connect libvgl library and splash kernel modules to amd64 build.
 - Connect manual page dpms(4) to amd64 build.
 - Remove old vesa/dpms files.

Submitted by:	paradox <ddkprog yahoo com> [1], swell k at gmail.com
		(with some minor tweaks)
2009-09-09 09:50:31 +00:00
Ed Schouten
4a6ecf078b Expose the TF_REVERSE flag to the console driver.
Right now libteken processes TF_REVERSE internally and returns the
toggled colors to the console driver. This isn't entirely correct. This
means that the bold flag is always processed by the foreground color,
while reversing should be done after the foreground color has been set
to a brighter version by the bold flag.

This is no problem with the syscons driver, because with VGA it only
supports 16 foreground and 8 background colors. My WIP console driver
reconfigures the graphics hardware to disable the blink functionality
and uses 16 foreground and 16 background colors. This means that this
driver will handle the TF_REVERSE flag a little different from what
syscons does right now.
2009-09-03 16:31:11 +00:00
Ed Schouten
9b934d0930 Move libteken out of the syscons directory.
I initially committed libteken to sys/dev/syscons/teken, but now that
I'm working on a console driver myself, I noticed this was not a good
decision. Move it to sys/teken to make it easier for other drivers to
use a terminal emulator.

Also list teken.c in sys/conf/files, instead of listing it in all the
files.arch files separately.
2009-09-03 09:33:57 +00:00
Xin LI
c5bebef869 Fix VESA modes and allow 8bit depth modes.
PR:		i386/124902
Submitted by:	paradox <ddkprog yahoo com>
MFC after:	2 months
2009-08-24 22:35:53 +00:00
Ed Schouten
706b8a103a Small fixes to Unicode handling:
- Add more mappings for Greek characters and the Euro sign.
- Print UTF-8 characters in the log file as hexadecimal.
2009-06-16 14:55:13 +00:00
Ed Schouten
324f7abb7f Add more entries to the Unicode-to-CP437 table.
Characters between 0x07 and 0x0d are now also mapped, which means we can
display almost 256 different characters. Also remap certain types of
dashes and quotes, which means we can finally read our manual pages
without red question marks in them.

Submitted by:	Christoph Mallon
2009-06-14 12:04:34 +00:00
Jamie Gritton
c1f192193d Rename the host-related prison fields to be the same as the host.*
parameters they represent, and the variables they replaced, instead of
abbreviated versions of them.

Approved by:	bz (mentor)
2009-06-13 15:39:12 +00:00
Ed Schouten
b32dcb662a Make the proof-of-concept UTF-8 support in Syscons less useless.
Add a small Unicode-to-CP437 remapping table to at least demonstrate
that the terminal emulator is perfectly capable of handling UTF-8. This
will of course break if the user loads a different font map, but it at
least allows people to give it a try.

I can now see the box drawing in dialog(1) and the arrows in mutt(1)
correctly.
2009-06-13 12:23:31 +00:00
Ed Schouten
e8857e9cd4 Make the demo/stress tools build again, after my changes to param(). 2009-06-10 18:26:02 +00:00
Ed Schouten
ec034df134 Restore support for bell pitch/duration.
Because we only support a single argument to tf_param, use 16 bits for
the pitch and 16 bits for the duration. While there, make the argument
unsigned. There isn't a single param call that needs a signed integer.

Submitted by:	danfe (modified)
2009-05-31 19:35:41 +00:00
Jamie Gritton
76ca6f88da Place hostnames and similar information fully under the prison system.
The system hostname is now stored in prison0, and the global variable
"hostname" has been removed, as has the hostname_mtx mutex.  Jails may
have their own host information, or they may inherit it from the
parent/system.  The proper way to read the hostname is via
getcredhostname(), which will copy either the hostname associated with
the passed cred, or the system hostname if you pass NULL.  The system
hostname can still be accessed directly (and without locking) at
prison0.pr_host, but that should be avoided where possible.

The "similar information" referred to is domainname, hostid, and
hostuuid, which have also become prison parameters and had their
associated global variables removed.

Approved by:	bz (mentor)
2009-05-29 21:27:12 +00:00
Ed Schouten
c5e30cc02b Last minute TTY API change: remove mutex argument from tty_alloc().
I don't want people to override the mutex when allocating a TTY. It has
to be there, to keep drivers like syscons happy. So I'm creating a
tty_alloc_mutex() which can be used in those cases. tty_alloc_mutex()
should eventually be removed.

The advantage of this approach, is that we can just remove a function,
without breaking the regular API in the future.
2009-05-29 06:41:23 +00:00
Ed Schouten
983d12f39b Turn consolectl into a simple device node, not a TTY.
Apart from the 16 virtual terminals, Syscons allocates two device nodes
that should not really be TTYs, even though they are. One of them is
consolectl. In RELENG_7 and before, these device nodes are used in
single user mode. After I simplified input path, we only use this device
node to call ioctl() on (moused, Xorg, vidcontrol).

When you call ioctl() on consolectl, it will behave the same as being
called on the first window.
2009-05-15 14:30:37 +00:00
Maksim Yevmenkin
af60af2dc0 Remove obsolete/bogus layering.
Reviewed by:	freebsd-current@, freebsd-hackers@
MFC after:	1 week
2009-04-09 18:22:51 +00:00
Ed Schouten
d50321fd3a Small cleanup to previous commit.
Just use % 8, instead of & 0x7. This makes it easier to understand.
2009-03-20 14:32:51 +00:00
Ed Schouten
3e1720f5e0 Just use default behaviour on tabstops when using too many columns.
It seems I didn't fix this issue before committing teken to the tree. My
initial idea was to somehow add an error mechanism to instruct the video
driver author to increase T_NUMCOL when using very big terminals. It
turns out we have platforms where we have gigantic consoles on systems
like the Apple PowerMac G5, which means we crash there right now.

Just ignore tabstops placed beyond column 160. Just force tabs to be
placed on each 8 columns.

Reported by:	nwhitehorn
2009-03-20 14:31:08 +00:00
Ed Schouten
630b9bf23f Make a 1:1 mapping between syscons stats and terminal emulators.
After I imported libteken into the source tree, I noticed syscons didn't
store the cursor position inside the terminal emulator, but inside the
virtual terminal stat. This is not very useful, because when you
implement more complex forms of line wrapping, you need to keep track of
more state than just the cursor position.

Because the kernel messages didn't share the same terminal emulator as
ttyv0, this caused a lot of strange things, like kernel messages being
misplaced and a missing notification to resize the terminal emulator for
kernel messages never to be resized when using vidcontrol.

This patch just removes kernel_console_ts and adds a special parameter
to te_puts to determine whether messages should be printed using regular
colors or the ones for kernel messages.

Reported by:	ache
Tested by:	nyan, garga (older version)
2009-03-10 11:28:54 +00:00
Ed Schouten
8ddd1f723d Don't call into the TTY layer when inside kdb.
We should just leave the underlying TTY objects alone when scrolling
around in KDB. It should be handled by Syscons exclusively.

Reported by:	pluknet gmail com
2009-03-09 19:46:19 +00:00
Ed Schouten
1356a0807f Remove unneeded variable assignment.
The ts variable is always initialized a few lines below.

Found by:	LLVM scan-build
2009-02-26 12:02:38 +00:00
Ed Schouten
3b31c19691 Properly implement GIO_ATTR and CONS_GETINFO.
It seems I didn't implement these two ioctl()'s properly, which meant
vidcontrol couldn't properly obtain certain terminal parameters.
2009-02-09 15:55:21 +00:00
Ed Schouten
2dfc3551a6 Add Unicode rendering to the teken demo application.
Some time ago I tried adding Unicode rendering to the teken demo
application, but I didn't get it working. It seems I forgot to call
setlocale(). Polish this code and make sure it doesn't get lost.

Also a small fix for my previous commit: all Unicode characters in
teken_boxdrawing are below 0x10000, so store them as 16-bit values.
2009-01-21 19:43:10 +00:00
Ed Schouten
4873b07e2a Properly implement the VT100 SCS sequences in xterm-mode.
Even though VT100-like devices can display non-ASCII characters, they do
not use an 8-bit character set. Special escape sequences allow the VT100
to switch character maps. The special graphics character set stores the
box drawing characters, starting at 0x60, ending at 0x7e. This means
we now pass the character map tests in vttest, even the save/restore
cursor test, combined with character maps. dialog(1) also works a lot
better now.

This commit also includes some other minor fixes:

- Default to 24 lines in teken_demo when using xterm emulation.
- Make white foreground and background work in teken_demo.
2009-01-20 11:34:28 +00:00
Ed Schouten
fcf1ff110a Don't forget to mark the color translation array as const.
Spotted by:	Christoph Mallon <christoph mallon gmx de>
2009-01-18 09:44:33 +00:00
Ed Schouten
6cecf41bf7 Fix for my previous commit: color mapping is not 1:1.
Cons25 doesn't seem to use a straight 1:1 mapping to the ANSI colors,
but uses the same color numbers as at least used by syscons on i386. I
suspect if you change the definitions on a different architecture,
things may break? Not sure.

Add a small array to convert syscons-style color codes to ANSI
equivalents, which are used by libteken internally. I didn't notice this
bug, because I only tested my code with black, white and green, all of
them shared the same numbers.
2009-01-17 23:01:40 +00:00
Ed Schouten
ec9037a258 Make vidcontrol's color setting work again.
It turns out I forgot to implement two escape sequences that allows the
user to change the default foreground and background colors. I thought
they were implemented by syscons itself, but vidcontrol just generates
some escape sequences, which get interpreted by the terminal emulator.

Reported by:	mgp (forums)
2009-01-17 22:53:53 +00:00
Ed Schouten
83409a55ec Allow experimental libteken features to be tested without changing code.
The teken library already supports UTF-8 handling and xterm emulation,
but we have reasons to disable this right now. Because we should make it
easy and interesting for people to experiment with these features, allow
them to be set in kernel configuration files.

Before this commit we had a flag called `TEKEN_CONS25' to enable
cons25-style emulation. I'm calling it the opposite now, `TEKEN_XTERM',
because we want to enable it in kernel configuration files explicitly.

Requested by:	kib
2009-01-17 16:37:13 +00:00
Ed Schouten
2056b4c79b Import yet some more small fixes to libteken sources:
- Implement NP (ASCII 12, Form Feed). When used with cons25, it should
  clear the screen and place the cursor at the top of the screen. When
  used with xterm, it should just simulate a newline.

- When we want to use xterm emulation, make teken_demo set TERM to
  xterm.

Spotted by:	Paul B. Mahol <onemda@gmail.com>
2009-01-05 22:09:46 +00:00
Ed Schouten
1259994283 Fix rendering glitch in cons25 emulation.
Because we now have cons25-style linewrapping, we must also use cons25-
style reverse linewrapping. This means that a ^H on column 0 will move
the cursor one line up.

Also fix a small regression: if the user invokes a RIS (Reset to Initial
State), we must show the cursor again.

Spotted by:	Paul B. Mahol <onemda gmail com>
2009-01-04 22:24:47 +00:00
Ed Schouten
67ac7fd748 Print control characters, even though they are normally not visible.
With cons25, there are printable characters below 0x1B. This is not the
case with ASCII, UTF-8, etc. but in this case we just have to.

Also don't set LC_CTYPE to UTF-8 when libteken is compiled without UTF-8
in the demo-application.
2009-01-04 00:20:18 +00:00
Ed Schouten
17c98d6dab Resolve some regressions related to tabs and linewrap handling.
It turns out I was looking too much at mimicing xterm, that I didn't
take the differences of cons25 into account. There are some differences
between xterm and cons25 that are important. Create a new #define called
TEKEN_CONS25 that can be toggled to switch between cons25 and xterm
mode.

- Don't forget to redraw the cursor after processing a forward/backward
  tabulation.

- Implement cons25-style (WYSE?) autowrapping. This form of autowrapping
  isn't that nice. It wraps the cursor when printing something on column
  80. xterm wraps when printing the first character that doesn't fit.

- In cons25, a \t shouldn't overwrite previous contents, while xterm
  does.

Reported by:	Garrett Cooper <yanefbsd gmail com>
2009-01-03 22:51:54 +00:00
Ed Schouten
bfe36bb462 Remove an unneeded assertion in libteken.
The cursor is only inside the scrolling region when we are in origin
mode. In that case, it should use originreg instead of scrollreg. It is
completely valid to place the cursor outside the scrolling region.
2009-01-01 23:22:01 +00:00
Ed Schouten
b4b1c5169d Replace syscons terminal renderer by a new renderer that uses libteken.
Some time ago I started working on a library called libteken, which is
terminal emulator. It does not buffer any screen contents, but only
keeps terminal state, such as cursor position, attributes, etc. It
should implement all escape sequences that are implemented by the
cons25 terminal emulator, but also a fair amount of sequences that are
present in VT100 and xterm.

A lot of random notes, which could be of interest to users/developers:

- Even though I'm leaving the terminal type set to `cons25', users can
  do experiments with placing `xterm-color' in /etc/ttys. Because we
  only implement a subset of features of xterm, this may cause
  artifacts. We should consider extending libteken, because in my
  opinion xterm is the way to go. Some missing features:

  - Keypad application mode (DECKPAM)
  - Character sets (SCS)

- libteken is filled with a fair amount of assertions, but unfortunately
  we cannot go into the debugger anymore if we fail them. I've done
  development of this library almost entirely in userspace. In
  sys/dev/syscons/teken there are two applications that can be helpful
  when debugging the code:

  - teken_demo: a terminal emulator that can be started from a regular
    xterm that emulates a terminal using libteken. This application can
    be very useful to debug any rendering issues.

  - teken_stress: a stress testing application that emulates random
    terminal output. libteken has literally survived multiple terabytes
    of random input.

- libteken also includes support for UTF-8, but unfortunately our input
  layer and font renderer don't support this. If users want to
  experiment with UTF-8 support, they can enable `TEKEN_UTF8' in
  teken.h. If you recompile your kernel or the teken_demo application,
  you can hold some nice experiments.

- I've left PC98 the way it is right now. The PC98 platform has a custom
  syscons renderer, which supports some form of localised input. Maybe
  we should port PC98 to libteken by the time syscons supports UTF-8?

- I've removed the `dumb' terminal emulator. It has been broken for
  years. It hasn't survived the `struct proc' -> `struct thread'
  conversion.

- To prevent confusion among people that want to hack on libteken:
  unlike syscons, the state machines that parse the escape sequences are
  machine generated. This means that if you want to add new escape
  sequences, you have to add an entry to the `sequences' file. This will
  cause new entries to be added to `teken_state.h'.

- Any rendering artifacts that didn't occur prior to this commit are by
  accident. They should be reported to me, so I can fix them.

Discussed on:	current@, hackers@
Discussed with:	philip (at 25C3)
2009-01-01 13:26:53 +00:00
Maksim Yevmenkin
8fc061164d Undo revision 185013 until better solution is found.
Pointed out by:	bde
2008-11-17 20:33:13 +00:00
Maksim Yevmenkin
ae670dad61 More locking for syscons(4). This should prevent races with sckbdevent().
PR:		kern/127446
Submitted by:	Eygene Ryabinkin rea-fbsd at codelabs dot ru
2008-11-16 22:39:04 +00:00
Ed Schouten
5bbae50149 Reduce the default baud rate of PTY's to 9600.
On RELENG_6 (and probably RELENG_7) we see our syscons windows and
pseudo-terminals have the following buffer sizes:

| LINE RAW CAN OUT IHIWT ILOWT OHWT LWT     COL STATE  SESS      PGID DISC
| ttyv0  0   0   0  7680  6720 2052 256       7 OCcl       1146  1146 term
| ttyp0  0   0   0  7680  6720 1296 256       0 OCc       82033 82033 term

These buffer sizes make no sense, because we often have much more output
than input, but I guess having higher input buffer sizes improves
guarantees of the system.

On MPSAFE TTY I just sent both the input and output buffer sizes to 7
KB, which is pretty big on a standard FreeBSD install with 8 syscons
windows and some PTY's. Reduce the baud rate to 9600 baud, which means
we now have the following buffer sizes:

|  LINE   INQ  CAN  LIN  LOW  OUTQ  USE  LOW   COL  SESS  PGID STATE
| ttyv0  1920    0    0  192  1984    0  199     7  2401  2401 Oil
| pts/0  1920    0    0  192  1984    0  199  5631  1305  2526 Oi

This is a lot smaller, but for pseudo-devices this should be good
enough. You need to do a lot of punching to fill up a 7.5 KB input
buffer. If it turns out things don't work out this way, we'll just
switch to 19200 baud.
2008-11-08 20:40:39 +00:00
Ed Schouten
0639d527ca Disable processing of output data after disabling scroll lock by force.
The syscons code disabled scroll lock inside sc_cnputs() if it's going
to print a system message. The code currently wants to process any TTY
output data as well, but we cannot do this, because the TTY lock is a
sleep mutex, while cnputs() picks up a spin mutex.

Disable the code for now. It solves a panic when a console message is
printed while scroll lock is enabled. One solution would be to
initialize a task structure here.

Reported by:	Paul B. Mahol <onemda gmail com>
2008-08-31 10:17:40 +00:00
Ed Schouten
537de51435 Make syscons(4) use ttyv0 instead of consolectl as its primary window.
When I was hacking on uart(4) to make it work with the MPSAFE TTY layer,
I noticed there was a difference between the way syscons and uart work
with respect to consoles:

- The uart(4) driver sets cn_name to the corresponding ttyu%r node,
  which means init(8) (which opens /dev/console) will have its output
  redirected to /dev/ttyu%r. After /etc/rc is done, it can spawn a getty
  on that device node as well.

- Syscons used a little different approach. Apart from the /dev/ttyv%r
  nodes, it creates a /dev/consolectl node. This device node is used by
  moused and others to deliver their data, but for some reason it also
  acts as a TTY, which shares its stat structure with ttyv0. This device
  node is used as a console (run conscontrol).

There are a couple advantages of this approach:

- Because we use two different TTY's to represent the 0th syscons
  window, we allocate two sets of TTY buffers. Even if you don't use
  /dev/consolectl after the system has booted (systems that don't run
  moused), it seems the buffers are still allocated.

- We have to apply an evil hack to redirect input to /dev/consolectl.
  Because each window (stat) is associated not associated with one TTY,
  syscons solves this by redirecting all input to closed TTY's to
  consolectl.

  This means that opening /dev/ttyv0 while in single user mode will
  probably cause strange things to happen with respect to keyboard input
  redirection.

The first patch that I discussed with philip@ turned consolectl into a
symlink to ttyv0, but this was not a good idea, because in theory we
would want consolectl to be a simple device node, which contains all the
`privileged' ioctl()'s. Apart from that, it didn't work, because each
time /dev/ttyv0 got revoked, moused also lost its descriptor to deliver
input, which meant you had to plug out/in your mouse to make it work
again. This version just leaves the consolectl device the way it is. It
can still be used to write output to ttyv0, but it can no longer receive
any input.

In my opinion this patch is not a complete solution, but it's already a
step in the good direction. It would allow us to turn consolectl into a
special (non-TTY) device node in the far future. It shaves off 15 KB of
wasted TTY buffer space.

Discussed with:	philip
2008-08-24 19:50:57 +00:00
Ed Schouten
dd63e2a189 Make sysmouse(4) use its own locks, instead of using Giant.
When I changed syscons(4) to work with the MPSAFE TTY code, I just
locked all device nodes down using the compatibility feature that allows
you to override the TTY's lock (Giant in this case). Upon closer
inspection, it seems sysmouse(4) only has two internal variables that
need locking: mouse_level and mouse_status.

I haven't done any performance benchmarks on this, though I think it
won't have any dramatic improvements on the system. It is good to get
rid of Giant here, because the third argument of tty_alloc() has only
been added to ease migration to MPSAFE TTY. It should not be used when
not needed.

While there, remove SC_MOUSE, which is a leftover from the MPSAFE TTY
import.
2008-08-24 15:20:44 +00:00
Ed Schouten
bc093719ca Integrate the new MPSAFE TTY layer to the FreeBSD operating system.
The last half year I've been working on a replacement TTY layer for the
FreeBSD kernel. The new TTY layer was designed to improve the following:

- Improved driver model:

  The old TTY layer has a driver model that is not abstract enough to
  make it friendly to use. A good example is the output path, where the
  device drivers directly access the output buffers. This means that an
  in-kernel PPP implementation must always convert network buffers into
  TTY buffers.

  If a PPP implementation would be built on top of the new TTY layer
  (still needs a hooks layer, though), it would allow the PPP
  implementation to directly hand the data to the TTY driver.

- Improved hotplugging:

  With the old TTY layer, it isn't entirely safe to destroy TTY's from
  the system. This implementation has a two-step destructing design,
  where the driver first abandons the TTY. After all threads have left
  the TTY, the TTY layer calls a routine in the driver, which can be
  used to free resources (unit numbers, etc).

  The pts(4) driver also implements this feature, which means
  posix_openpt() will now return PTY's that are created on the fly.

- Improved performance:

  One of the major improvements is the per-TTY mutex, which is expected
  to improve scalability when compared to the old Giant locking.
  Another change is the unbuffered copying to userspace, which is both
  used on TTY device nodes and PTY masters.

Upgrading should be quite straightforward. Unlike previous versions,
existing kernel configuration files do not need to be changed, except
when they reference device drivers that are listed in UPDATING.

Obtained from:		//depot/projects/mpsafetty/...
Approved by:		philip (ex-mentor)
Discussed:		on the lists, at BSDCan, at the DevSummit
Sponsored by:		Snow B.V., the Netherlands
dcons(4) fixed by:	kan
2008-08-20 08:31:58 +00:00
Bjoern A. Zeeb
603724d3ab Commit step 1 of the vimage project, (network stack)
virtualization work done by Marko Zec (zec@).

This is the first in a series of commits over the course
of the next few weeks.

Mark all uses of global variables to be virtualized
with a V_ prefix.
Use macros to map them back to their global names for
now, so this is a NOP change only.

We hope to have caught at least 85-90% of what is needed
so we do not invalidate a lot of outstanding patches again.

Obtained from:	//depot/projects/vimage-commit2/...
Reviewed by:	brooks, des, ed, mav, julian,
		jamie, kris, rwatson, zec, ...
		(various people I forgot, different versions)
		md5 (with a bit of help)
Sponsored by:	NLnet Foundation, The FreeBSD Foundation
X-MFC after:	never
V_Commit_Message_Reviewed_By:	more people than the patch
2008-08-17 23:27:27 +00:00
Konstantin Belousov
66548e0a2f Lower the priority of the sleep in the syscons for "waitvt" wchan to
PZERO + 1. The sleeping process at the priority <= PZERO is counted as
blocked, or, as comment states, 'disk wait'. PZERO + 1 works as well,
and does not cause user confusion.

Reported by:	sam <samflanker at gmail com>
MFC after:	1 week
2008-08-04 12:22:33 +00:00
Robert Watson
4f7d1876d5 Introduce a new lock, hostname_mtx, and use it to synchronize access
to global hostname and domainname variables.  Where necessary, copy
to or from a stack-local buffer before performing copyin() or
copyout().  A few uses, such as in cd9660 and daemon_saver, remain
under-synchronized and will require further updates.

Correct a bug in which a failed copyin() of domainname would leave
domainname potentially corrupted.

MFC after:	3 weeks
2008-07-05 13:10:10 +00:00
Poul-Henning Kamp
e465985885 The "free-lance" timer in the i8254 is only used for the speaker
these days, so de-generalize the acquire_timer/release_timer api
to just deal with speakers.

The new (optional) MD functions are:
	timer_spkr_acquire()
	timer_spkr_release()
and
	timer_spkr_setfreq()

the last of which configures the timer to generate a tone of a given
frequency, in Hz instead of 1/1193182th of seconds.

Drop entirely timer2 on pc98, it is not used anywhere at all.

Move sysbeep() to kern/tty_cons.c and use the timer_spkr*() if
they exist, and do nothing otherwise.

Remove prototypes and empty acquire-/release-timer() and sysbeep()
functions from the non-beeping archs.

This eliminate the need for the speaker driver to know about
i8254frequency at all.  In theory this makes the speaker driver MI,
contingent on the timer_spkr_*() functions existing but the driver
does not know this yet and still attaches to the ISA bus.

Syscons is more tricky, in one function, sc_tone(), it knows the hz
and things are just fine.

In the other function, sc_bell() it seems to get the period from
the KDMKTONE ioctl in terms if 1/1193182th second, so we hardcode
the 1193182 and leave it at that.  It's probably not important.

Change a few other sysbeep() uses which obviously knew that the
argument was in terms of i8254 frequency, and leave alone those
that look like people thought sysbeep() took frequency in hertz.

This eliminates the knowledge of i8254_freq from all but the actual
clock.c code and the prof_machdep.c on amd64 and i386, where I think
it would be smart to ask for help from the timecounters anyway [TBD].
2008-03-26 20:09:21 +00:00
Alexander Nedotsukov
debf713e45 Improve VT_WAITACTIVE semantics.
- Wait for requested vty activation regardless its open state.
- Remove redundant console cleanup.

Approved by:	kib
MFC after:	1 week
2008-03-20 04:10:52 +00:00
Robert Watson
237fdd787b In keeping with style(9)'s recommendations on macros, use a ';'
after each SYSINIT() macro invocation.  This makes a number of
lightweight C parsers much happier with the FreeBSD kernel
source, including cflow's prcc and lxr.

MFC after:	1 month
Discussed with:	imp, rink
2008-03-16 10:58:09 +00:00
John Baldwin
1d9c3ad3ef Mark the syscons video spin mutex as recursable since it is currently
recursed in a few places.

MFC after:	1 week
2008-02-13 23:38:08 +00:00
Konstantin Belousov
eee74fe05d Do not dereference NULL scp in the case the screen is not opened.
Instead, return ENXIO to the ioctl caller.

Reported and tested by:	Pawel Worach <pawel.worach gmail com>
Discussed with:	markus
MFC after:	3 days
2008-01-24 15:37:48 +00:00
Wojciech A. Koszek
9336e0699b Replace explicit calls to video methods with their respective variants
implemented with macros. This patch improves code readability. Reasoning
behind vidd_* is a sort of "video discipline".

List of macros is supposed to be complete--all methods of video_switch
ought to have their respective macros from now on.

Functionally, this code should be no-op. My intention is to leave current
behaviour of touched code as is.

No objections:	rwatson
Silence on:	freebsd-current@
Approved by:	cognet
2007-12-29 23:26:59 +00:00
Wojciech A. Koszek
259699b294 Remove explicit calls to keyboard methods with their respective variants
implemented with macros. This patch improves code readability. Reasoning
behind kbdd_* is a "keyboard discipline".

List of macros is supposed to be complete--all methods of keyboard_switch
should have their respective macros from now on.

Functionally, this code should be no-op. My intention is to leave current
behaviour of code as is.

Glanced at by:	rwatson
Reviewed by:	emax, marcel
Approved by:	cognet
2007-12-29 21:55:25 +00:00
Robert Watson
3de213cc00 Add a new 'why' argument to kdb_enter(), and a set of constants to use
for that argument.  This will allow DDB to detect the broad category of
reason why the debugger has been entered, which it can use for the
purposes of deciding which DDB script to run.

Assign approximate why values to all current consumers of the
kdb_enter() interface.
2007-12-25 17:52:02 +00:00
Hidetoshi Shimokawa
a69d19dc33 Serialize output routine of terminal emulator (te_puts()) by a lock.
- The output routine of low level console is not protected by any lock
by default.
- Increment and decrement of sc->write_in_progress are not atomic and
this may cause console hang.
- We also have many other states used by emulator that should be protected
by the lock.
- This change does not fix interspersed messages which PRINTF_BUFR_SIZE
kernel option should fix.

Approved by: re (bmah)
MFC after: 1 week
2007-09-20 04:05:59 +00:00
Joe Marcus Clarke
e1433e6b8a Fix a bug that will cause a process that calls the VT_WAITACTIVE ioctl
to become unkillable when that process is sent a termination signal.  The
process will sit in waitvt looping in the kernel, and chewing up all
available CPU until the system is rebooted.

Submitted by:	Jilles Tjoelker <jilles@stack.nl>
Reviewed by:	bde
Approved by:	re (kensmith)
MFC after:	1 week
2007-09-19 03:59:33 +00:00
Marius Strobl
7ca851e3a5 According to the default font size on sparc64 provide a 12 x 22
mouse pointer instead of a 8 x 16 one so device drivers don't
need to bring there own one there and in gfb_mouse() (ab)use
the pixel_mask argument of putm() to pass along on/off info as
erasing the mouse cursor image by redrawing the text underneath
doesn't work as we use hardware cursors on sparc64.
2007-06-18 22:15:17 +00:00
Jeff Roberson
1b1618fb12 - Change comments and asserts to reflect the removal of the global
scheduler lock.

Tested by:      kris, current@
Tested on:      i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc.
Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
2007-06-04 23:57:32 +00:00
Xin LI
77a20b72ef Make the comparsion more obvious. 2007-05-25 13:13:12 +00:00
Philip Paeps
0754972c5c Optimize set_origin() use in some screensavers to stop them eating
cpu power when the origin hasn't changed.

PR:		kern/100683
Submitted by:	Gareth McCaughan <gareth -dot- mccaughan -at- pobox.com>
MFC after:	3 days
2007-02-21 12:27:12 +00:00
Marius Strobl
2e297271ca Correct the VGA_NO_MODE_CHANGE end marker comment. 2007-01-10 19:04:00 +00:00
Ruslan Ermilov
5a66b66324 Replace magic numbers for console bell types with defines. 2006-11-16 12:27:51 +00:00
Ruslan Ermilov
4f32adad48 Sometimes the vty switching has to be delayed; the vty
to be switched to is saved in sc->delayed_next_scr and
the actual switch is performed later.  It was possible
to get into the endless loop when attempting to switch
to a closed vty (which is not allowed and beep-alerted
when attempted) and when the visual beep was in effect.
This caused sc->delayed_next_scr to never be reset and
endless attempts to switch to a closed vty and endless
visual beeping.  How to repeat:

- boot into single-user
- run "kbdcontrol -b visual"
- quickly press Alt+F2 two times

PR:		kern/68016
X-MFC after:	6.2-RELEASE
2006-11-06 19:06:07 +00:00
Robert Watson
acd3428b7d Sweep kernel replacing suser(9) calls with priv(9) calls, assigning
specific privilege names to a broad range of privileges.  These may
require some future tweaking.

Sponsored by:           nCircle Network Security, Inc.
Obtained from:          TrustedBSD Project
Discussed on:           arch@
Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri,
                        Alex Lyashkov <umka at sevcity dot net>,
                        Skip Ford <skip dot ford at verizon dot net>,
                        Antoine Brodin <antoine dot brodin at laposte dot net>
2006-11-06 13:42:10 +00:00
Ruslan Ermilov
9fddcc6661 Fix our ioctl(2) implementation when the argument is "int". New
ioctls passing integer arguments should use the _IOWINT() macro.
This fixes a lot of ioctl's not working on sparc64, most notable
being keyboard/syscons ioctls.

Full ABI compatibility is provided, with the bonus of fixing the
handling of old ioctls on sparc64.

Reviewed by:	bde (with contributions)
Tested by:	emax, marius
MFC after:	1 week
2006-09-27 19:57:02 +00:00
Scott Long
988129b824 Introduce a spinlock for synchronizing access to the video output hardware
in syscons.  This replaces a simple access semaphore that was assumed to be
protected by Giant but often was not.  If two threads that were otherwise
SMP-safe called printf at the same time, there was a high likelyhood that
the semaphore would get corrupted and result in a permanently frozen video
console.  This is similar to what is already done in the serial console
drivers.
2006-09-13 15:48:15 +00:00
Poul-Henning Kamp
7672c95932 Convert to new console api 2006-05-26 13:54:27 +00:00
Poul-Henning Kamp
16b1613a31 GC the cn_dbctl_t hook for consoles, it is unused.
This used to make syscons switch to vty0 when we entered DDB but this
was lost in the KDB shuffle.  We may want to bring it back down the road
but it should be done by calling cn_init_t/cn_term_t instead, possibly
with a flag argument saying "Debugger!"
2006-05-26 10:24:00 +00:00
Warner Losh
d708737568 APM was calling the suspend process from a timeout. This meant that
other timeouts could not happen while suspending, including timeouts
for things like msleep.  This caused the system to hang on suspend
when the cbb was enabled, since its suspend path powered down the
socket which used a timeout to wait for it to be done.

APM now creates a thread when it is enabled, and deletes the thread
when it is disabled.  This thread takes the place of the timeout by
doing its polling every ~.9s.  When the thread is disabled, it will
wakeup early, otherwise it times out and polls the varius things the
old timeout polled (APM events, suspend delays, etc).

This makes my Sony VAIO 505TS suspend/resume correctly when APM is
enabled (ACPI is black listed on my 505TS).

This will likely fix other problems with the suspend path where
drivers would sleep with msleep and/or do other timeouts.  Maybe
there's some special case code that would use DELAY while suspending
and msleep otherwise that can be revisited and removed.

This was also tested by glebius@, who pointed out that in the patch I
sent him, I'd forgotten apm_saver.c

MFC After: 3 weeks
2006-05-25 23:06:38 +00:00
Poul-Henning Kamp
f6ce2a64f7 Send the pcvt(4) driver off to retirement. 2006-05-17 09:33:15 +00:00
Giorgos Keramidas
cb9dec9ec1 Check the return code of sc_clean_up() in the only place where it
was not checked at all.  There is only one case when sc_clean_up()
can fail, because of wait_scrn_saver_stop(), but it doesn't hurt
to check anyway.

Reviewed by:	rodrigc
Found by:	Coverity Prevent
2006-05-12 22:43:07 +00:00
John Baldwin
73dbd3da73 Remove various bits of conditional Alpha code and fixup a few comments. 2006-05-12 05:04:46 +00:00
Maksim Yevmenkin
d168d95487 Integrate kbdmux(4) into syscons(4) and kbd code.
By default syscons(4) will look for the kbdmux(4) keyboard first, and then,
if not found, look for any keyboard.

Current kbd code is modified so if kbdmux(4) is the current keyboard, all
new keyboards are automatically added to the kbdmux(4).

Switch to kbdmux(4) can be done at boot time, by loading kbdmux module at
the loader prompt, or at runtime, by kldload'ing the kbdmux module and
releasing current active keyboard.

If, for whatever reason, kbdmux(4) is not required/desired then just do
not load it and everything should work as before. It is also possible to
kldunload kbdmux at runtime and syscons(4) will automatically switch to
the first available keyboard.

No response from:	freebsd-current@
MFC after:		1 day
2006-02-28 23:46:23 +00:00
Brooks Davis
30e3426947 When SC_DISABLE_KDBKEY or SC_DISABLE_REBOOT are not defined allow the
same behavior to be controlled by the sysctls, hw.syscons.kbd_kbdkey
and hw.syscons.kbd_reboot respectively.

Apologies to the submitter for taking so long to commit this simple
change.

PR:		kern/72728
Submitted by:	Luca Morettoni <morettoni at libero dot it>
MFC After:	3 days
2006-01-14 17:57:17 +00:00
Ruslan Ermilov
f4e9888107 Fix -Wundef. 2005-12-04 02:12:43 +00:00
Marius Strobl
b7c96c0d0b Add a font width argument to vi_load_font_t, vi_save_font_t and vi_putm_t
and do some preparations for handling 12x22 fonts (currently lots of code
implies and/or hardcodes a font width of 8 pixels). This will be required
on sparc64 which uses a default font size of 12x22 in order to add font
loading and saving support as well as to use a syscons(4)-supplied mouse
pointer image.
This API breakage is committed now so it can be MFC'ed in time for 6.0
and later on upcoming framebuffer drivers destined for use on sparc64
and which are expected to rely on using font loading internally and on
a syscons(4)-supplied mouse pointer image can be easily MFC'ed to
RELENG_6 rather than requiring a backport.

Tested on:	i386, sparc64, make universe
MFC after:	1 week
2005-09-28 14:54:07 +00:00
Craig Rodrigues
3a9c56bec9 In set_mouse_pos(), try to avoid division by zero errors. 2005-09-07 15:19:03 +00:00
Craig Rodrigues
4506b763e0 In sc_set_text_mode(), reset fontwidth if it is <= 0.
Eliminates division by zero errors in syscons driver.

Reported by:	keramida, Slawa Olhovchenkov <slw at zxy dot spb dot ru>,
		Kyryll Mirnenko <mirya at matrix dot kiev dot ua>
Tested by:	keramida, rodrigc
2005-09-06 20:38:39 +00:00
Craig Rodrigues
86330afe35 Prevent division by zero errors in sc_mouse_move()
by explicitly setting sc->font_width, in the same
places where sc->font_size is set, instead of
relying on the default initialized value of 0 for sc->font_width.

PR:		kern/84836
Reported by:	Andrey V. Elsukov <bu7cher at yandex dot ru>
MFC after:	2 days
2005-08-30 18:58:17 +00:00
Maksim Yevmenkin
04551c6ce5 kbdmux(4) keyboard multiplexer integration
o Add two new ioctl's KBADDKBD and KBRELKBD. These are used to add and remove
  keyboard to (and from) kbdmux(4) keyboard multiplexer;

o Introduce new kbd_find_keyboard2() function. It does exactly the same job
  as kbd_find_keyboard() function except it allows to specify starting index.
  This function can be used to iterate over keyboards array;

o Re-implement kbd_find_keyboard() as call to kbd_find_keyboard2() with starting
  index of zero;

o Make sure syscons(4) passed KBADDKBD and KBRELKBD ioctl's onto currently
  active keyboard.

These changes should not have any visible effect.

MFC after:	1 week
2005-07-13 23:58:57 +00:00
Peter Wemm
e55b30b469 Fix syscons on amd64. The SC_PIXEL_MODE commit from May 29th added a new
function pointer to the vga render dispatch table and initialized it with
vga_nop.  The problem is that vga_nop() is a varargs function, and the
table declares a non-varargs function pointer.  On amd64 (and I think ppc),
mixing varargs and non-varargs function pointers is fatal.

Change vga_nop() and gfb_nop() from varargs to non-varargs do-nothing
functions.  This stops the stack corruption that only happened on amd64.

Approved by:  re (scottl)
2005-06-14 02:43:45 +00:00
Xin LI
4c3763445d Only set mode when the incoming ioctl is IOC_VOID, until we have better
solution against the ioctl collisions.

Submitted by:	Antoine Brodin <antoine.brodin at laposte net>
PR:		kern/81867
2005-06-10 05:20:33 +00:00
Scott Long
5a8d0950c1 Fix LINT by defining vga_pxlmouse_planar and vga_pxlmouse_direct. 2005-05-30 18:37:25 +00:00
Xin LI
b147cf1db2 Deny to switch into banked video mode when it is not available. Some
users has reported corrupted display with old video cards.

Submitted by:	Michal Mertl <mime traveller cz>
2005-05-30 06:45:40 +00:00
Marius Strobl
80afb03ba1 Add vr_init_t member to sc_rndr_sw_t instances in order to unbreak
compilation after sys/dev/syscons/syscons.h rev. 1.83.
2005-05-29 12:47:39 +00:00
Xin LI
f112120666 Add VESA mode support for syscons, which enables the support of 15, 16,
24, and 32 bit modes.  To use that, syscons(4) must be built with
the compile time option 'options SC_PIXEL_MODE', and VESA support (a.k.a.
vesa.ko) must be either loaded, or be compiled into the kernel.

Do not return EINVAL when the mouse state is changed to what it already is,
which seems to cause problems when you have two mice attached, and
applications are not likely obtain useful information through the EINVAL
caused by showing the mouse pointer twice.

Teach vidcontrol(8) about mode names like MODE_<NUMBER>, where <NUMBER> is
the video mode number from the vidcontrol -i mode output.  Also, revert the
video mode if something fails.

Obtained from:	DragonFlyBSD
Discussed at:	current@ with patch attached [1]
PR:		kern/71142 [2]
Submitted by:	Xuefeng DENG <dsnofe at msn com> [1],
		Cyrille Lefevre <cyrille dot lefevre at laposte dot net> [2]
2005-05-29 08:43:44 +00:00
Marius Strobl
c9367f6c37 - Not every architecture defaults to a black background (e.g. sparc64
uses white) so base the color of the border on SC_NORM_ATTR rather
  than hardcoding BG_BLACK.
- Use SC_DRIVER_NAME rather than hardcoding 'sc' in message strings
  (see also sys/dev/syscons/syscons.h rev. 1.82).
2005-05-21 20:32:27 +00:00
Marius Strobl
fc0e49bd50 On sparc64 use 'syscons' rather than 'sc' for SC_DRIVER_NAME so
syscons(4) and its pseudo-devices don't get confused (including by
other device drivers) with the system controller devices which are
also termed 'sc' in the OFW tree (and which we probably want to
interface with hwpmc(4) one day).
2005-05-21 20:29:58 +00:00
Marius Strobl
ae240fafb2 Remove superfluous braces and add #ifndef __sparc64__ around the
VTB_FRAMEBUFFER specific code. On sparc64 we don't use a buffer of
type VTB_FRAMEBUFFER (see syscons.c) and excluding the respective
code here allows to compile syscons(4) without isa(4).

Requested by:	joerg, marcel, yongari
2005-05-21 20:28:15 +00:00
Marius Strobl
912dd06aed For sparc64 conditionalize the compilation of the gfb_cursor() variant
which doesn't assume a hardware cursor on __sparc64__ rather than on
DEV_CREATOR. If we want to include more than one framebuffer driver in
e.g. the GENERIC kernel all drivers have to work the same way. Now that
DEV_CREATOR is no longer used remove it from options.sparc64.
2005-05-21 20:15:14 +00:00
Yoshihiro Takahashi
f4acf7e936 Remove old epson note support. 2005-05-15 09:07:42 +00:00
Yoshihiro Takahashi
6959aa373c - Add color tables for 16 colors mode and 8 colors mode, use a different
table on the pc98 console.
- Remove old epson note support.
2005-05-15 09:07:04 +00:00