I was not aware Warner was making or planning to make forward progress in
this area and have since been informed of that.
It's easy to apply/reapply when churn dies down.
Inspired by r338025, just remove the element size parameter to the
MODULE_PNP_INFO macro entirely. The 'table' parameter is now required to
have correct pointer (or array) type. Since all invocations of the macro
already had this property and the emitted PNP data continues to include the
element size, there is no functional change.
Mostly done with the coccinelle 'spatch' tool:
$ cat modpnpsize0.cocci
@normaltables@
identifier b,c;
expression a,d,e;
declarer MODULE_PNP_INFO;
@@
MODULE_PNP_INFO(a,b,c,d,
-sizeof(d[0]),
e);
@singletons@
identifier b,c,d;
expression a;
declarer MODULE_PNP_INFO;
@@
MODULE_PNP_INFO(a,b,c,&d,
-sizeof(d),
1);
$ rg -l MODULE_PNP_INFO -- sys | \
xargs spatch --in-place --sp-file modpnpsize0.cocci
(Note that coccinelle invokes diff(1) via a PATH search and expects diff to
tolerate the -B flag, which BSD diff does not. So I had to link gdiff into
PATH as diff to use spatch.)
Tinderbox'd (-DMAKE_JUST_KERNELS).
When enabled by EEPROM, use it to relax translation address/size alignment
requirements for BAR2 window by 128 or 256 times.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
An eventual devd(8) or other component should be able to scan buses and
automatically load drivers that match device ids described in this metadata.
Reviewed by: imp
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12364
There is no big need to burn CPU if other side may be not there yet. For
example, the PLX hardware by default enables the NTB link up on reset, not
dependig on driver to do it. In case of Intel hardware this also reduces
race between MSI-X workaround negotiation and upper layers, using the same
scratchpad registers in different time.
MFC after: 12 days
This driver supports both NTB-to-NTB and NTB-to-Root Port modes (though
the second with predictable complications on hot-plug and reboot events).
I tested it with PEX 8717 and PEX 8733 chips, but expect it should work
with many other compatible ones too. It supports up to two NT bridges
per chip, each of which can have up to 2 64-bit or 4 32-bit memory windows,
6 or 12 scratchpad registers and 16 doorbells. There are also 4 DMA engines
in those chips, but they are not yet supported.
While there, rename Intel NTB driver from generic ntb_hw(4) to more specific
ntb_hw_intel(4), so now it is on par with this new ntb_hw_plx(4) driver and
alike to Linux naming.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Since the doorbell bit is already set when interrupt handler is called,
the event was not propagated to upper layer. It was working normally
because present code was not using masking actively, but that is going
to change.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
New design allows hardware resources to be split between several consumers.
For example, one BAR can be dedicated for remote memory access, while other
resources can be used for packet transport for virtual Ethernet interface.
And even without resource split, this code allows to specify which consumer
driver should attach the hardware.
From some points this makes the code even closer to Linux one, even though
Linux does not provide the described flexibility.
Calling it earlier increases the window when MSIX info may change.
This change does not solve the problem completely, but seems logical.
Complete solution should probably include link reset in case of MSIX
remap to trigger new negotiation, but we have no way to get notified
about that now.
I don't know what errata is mentioned there, I was unable to find it, but
setting limit before the base simply does not work at all. According to
specification attempt to set limit out of the present window range resets
it to zero, effectively disabling it. And that is what I see in practice.
Fixing this properly disables access for remote side to our memory until
respective xlat is negotiated and set. As I see, Linux does the same.
For some reason hack with sending MSI-X interrupts by writing to remote
LAPIC memory works only for 32-bit BARs, that are available only if split
BARs mode is enabled in BIOS. If it is not, complain loudly and fall back
to less efficient workaround.
This allows at least first three doorbells to work very close to normal
hardware, properly signaling events to upper layers without spurious or
lost events. Doorbells above the first three may still report spurious
events due to lack of reliable information, but they are rarely used.
It is odd idea to serialize different MSI-X vectors. Use of rmlocks
here allows them to execute in parallel, but still protects ctx.
If upper layers require any additional serialization -- they can
do it by themselves.
This follows NTB subsystem modularization in Linux, tuning it to FreeBSD
native NewBus interfaces. This change allows to support different types
of hardware with different drivers, support multiple NTB instances in a
system, ntb_transport module use for needs other then if_ntb, etc.
Sponsored by: iXsystems, Inc.
Since SBARxSZ register can be write-once, it can be unusable for disabling
the SBAR. For such case also set SBARxBASE to zero to not intersect with
config BAR.
BAR size to 1MB. According to Xeon v3 specifications and my tests, that
size register is write-once and so not writeable after BIOS written it.
Instead of that, make the code work with BAR of any sufficient size,
properly calculating offset within its base. It also simplifies the code.
Discussed with: cem
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
NTB_MSIX_RECEIVED status, before making upper layers overwrite it.
This is not completely perfect, but now it works better then before.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
This patch comes from Dave Jiang's Linux tree, davejiang/ntb. It hasn't
been accepted into Linus' tree, so I do not have an authoritative SHA1
to point at. Original commit log:
=====================================================================
A hardware errata causes the NTB to hang when heavy bi-directional
traffic in addition to the usage of BAR0/1 (where the registers reside,
including the doorbell registers to trigger interrupts).
This workaround is only available on Haswell and Broadwell platform.
The workaround is to enable split BAR in the BIOS to allow the 64bit
BAR4 to be split into two 32bit BAR4 and BAR5. The BAR4 shall be pointed
to LAPIC region of the remote host. We will bypass the db mechanism and
directly trigger the MSIX interrupts. The offsets and vectors are
exchanged during transport scratch pad negotiation. The scratch pads are
now overloaded in order to allow the exchange of the information. This
gets around using the doorbell and prevents the lockup with additional
pcode changes in BIOS.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
=====================================================================
Notable changes in the FreeBSD version of this patch:
* The MSIX BAR is configurable, like hw.ntb.b2b_mw_idx (msix_mw_idx).
The Linux version of the patch only uses BAR4.
* MSIX negotiation aborts if the link goes down.
Obtained from: Linux (Dual BSD/GPL driver)
Sponsored by: EMC / Isilon Storage Division
Replace the hw.ntb.enable_writecombine tunable with
hw.ntb.default_mw_pat. It can be set with several specific numerical
values to select a caching type. Any bogus value is treated as
Uncacheable (UC).
The ntb_mw_set_wc() KPI has removed the restriction that the selected
mode must be one of UC, WC, or WB.
Sponsored by: EMC / Isilon Storage Division
And expose vm_memattr_t of current mapping to consumers (as well as the
ability to change it to one of UC, WB, WC).
After short discussion with: jhb (but no review)
Sponsored by: EMC / Isilon Storage Division
Adds a new tunable, ntb.hw.b2b_mw_idx, which specifies the offset (from the
total number of memory windows) to use for register access on hardware with
the SDOORBELL_LOCKUP errata. The default is -1, i.e., the last memory
window.
We map BARs before the b2b_mw_idx is selected, so map them all as memory
windows initially. The register memory window should not be write-combined,
so we explicitly disable WC on the selected MW later.
This introduces a layer of abstraction between consumer memory window
indices, which exclude any exclusive errata-workaround BARs, and internal
memory window indices, which include such BARs. An internal routine,
ntb_user_mw_to_idx(), converts the former to the latter. Public APIs have
been updated to use this instead of assuming the exclusive workaround BAR is
the last available MW.
Sponsored by: EMC / Isilon Storage Division
This feature is disabled by default. To enable it, tune
hw.if_ntb.enable_xeon_watchdog to non-zero.
If enabled, writes an unused NTB register every second to demonstrate to
a hardware watchdog that the NTB device is still alive. Most machines
with NTB will not need this -- you know who you are.
Sponsored by: EMC / Isilon Storage Division
32-bit BARs can only address memory mapped in the low 32 bits of
physical RAM. Expose this as a 'plimit' out parameter from
ntb_mw_get_range().
Fix if_ntb to allocate memory within this limit.
Sponsored by: EMC / Isilon Storage Division
Sometimes they'll read spurious values (observed: 0xc on Broadwell-DE),
failing link negotiation.
Discussed with: Dave Jiang, Allen Hubbe
Sponsored by: EMC / Isilon Storage Division
The tunable 'hw.ntb.enable_writecombine' may be set to zero to
administratively disable write combining the mapped NTB region.
Sponsored by: EMC / Isilon Storage Division
There is no need for the upstream and downstream addresses to be
different for the NTB configs. Go to using a single set of address. It
is still possible to configure them differently using module parameter
override however (CEM: tunable).
Authored by: Dave Jiang <dave.jiang@intel.com>
Reviewed by: Allen Hubbe <Allen.Hubbe@emc.com>
Reviewed by: Jon Mason <jdmason@kudzu.us>
Obtained from: Linux (Dual BSD/GPL driver)
Sponsored by: EMC / Isilon Storage Division
