c_addr in spcl. So check before we start dumping otherwise we can
end up with a corrupted dump.
PR: 228807
Submitted by: db
Reviewed by: imp
Approved by: imp
Followup to r313780. Also prefix ext2's and nandfs's versions with
EXT2_ and NANDFS_.
Reported by: kib
Reviewed by: kib, mckusick
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D9623
Specifically reading is done if ffs_sbget() and writing is done
in ffs_sbput(). These functions are exported to libufs via the
sbget() and sbput() functions which then used in the various
filesystem utilities. This work is in preparation for adding
subperblock check hashes.
No functional change intended.
Reviewed by: kib
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
The index() and rindex() functions were marked LEGACY in the 2001
revision of POSIX and were subsequently removed from the 2008 revision.
The strchr() and strrchr() functions are part of the C standard.
This makes the source code a lot more consistent, as most of these C
files also call into other str*() routines. In fact, about a dozen
already perform strchr() calls.
include sys/time.h instead of time.h. This include is incorrect as
per the manpages for the APIs and the POSIX definitions. This commit
replaces sys/time.h where necessary with time.h.
The commit also includes some minor style(9) header fixup in newfs.
This commit is part of a larger effort by Garrett Cooper started in
//depot/user/gcooper/posix-conformance-work/ -- to make FreeBSD more
POSIX compliant.
Submitted by: Garrett Cooper yanegomi at gmail dot com
to a remote machine, the fact that the dump date is stored with
each header (inode) record makes rsync significantly less efficient
than necessary. This also applies to inode access times when they
are not important data to retain. When implementing an offsite
backup solution of this type, these dates in particular are not
important, especially if it prevents effective offsite backups.
PR: bin/91049
Submitted by: Forrest W Christian <fwc@mt.net>
generate snapshots in when -L is requested. If the .snap directory
does not exist, or is not a directory, issue a warning and revert
to the non- live behavior.
Obtained from: St. Bernard Software RAPID
use backup methods other than files and tapes. The -P argument is
a normal sh(1) pipeline with either $DUMP_VOLUME or $RESTORE_VOLUME
defined in the environment, respectively.
For example, I can back up my home to three DVD+R[W]s as so:
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/ad0s2e 40028550 10093140 26733126 27% /home
green# dump -0 -L -C16 -B4589840 -P 'growisofs -Z /dev/cd0=/dev/fd/0' /home
of trying to directly create the snapshot itself. This change allows
users logged into the system as operator to run live dumps.
Note that dump no longer tries to create the snapshot in the root of
the filesystem, but rather in a .snap directory in the root of the
filesystem. The reason is that the operator is usually not permitted
to write into the root of the filesystem. The newfs command and
background fsck have both been modified to create a .snap directory
in the root of the filesystem, but if neither of these have been run,
then the .snap directory must be created manually by the superuser
before a live dump can be run. The .snap directory should be owned
by user root and group operator and set to mode 770.
- using (intmax_t) and %j
- giving a non-empty format string to msg()
Include <stdint.h> directly instead of depending on <inttypes.h>
to do it.
Tested by: make universe
1024-byte boundaries. For many years this was a reasonable
assumption. However, in recent years we have begun seeing
devices with 2048-byte sectors. These devices return errors
when dump tries to read starting in the middle of a sector
or when it tries to read only the first half of a sector.
Rather than change the native block size used by dump (and
thus create an incompatible dump format), this fix checks
for transfer requests that start and/or end on a non-sector
boundary. When such a read is detected, the new code reads
the entire sector and copies out just the part that dump
needs.
Reviewed by: Poul-Henning Kamp <phk@critter.freebsd.dk>
Approved by: re (John Baldwin <jhb@FreeBSD.org>)
Sponsored by: DARPA & NAI Labs.
called -r but it takes 512 byte blocks instead of megabytes, and I felt a
megabytes specification would be far more useful so I did not use the same
option character.
This will *greatly* improve dump performance at the cost of possibly
missing filesystem changes that occur between passes, and does a fairly
good job making up for the loss of buffered block devices. Caching is disabled
by default to retain historical behavior.
In tests, dump performance improved by about 40% when dumping / or /usr.
Beware that dump forks and the cache may wind up being larger then you
specify, but a more complex shared memory implementation would not produce
results that are all that much better so I kept it simple for now.
MFC after: 3 days
live filesystem. To obtain a consistent dump image, dump takes
a snapshot of the filesystem and then does a dump of the snapshot.
The snapshot is removed when the dump is complete.
Also add an operator warning that the `L' option should be used
if dump is run on a live filesystem without the `L' option being
specified. The alternative would be to silently use a snapshot
any time that a live filesystem is dumped, but this change in
dump semantics seemed too drastic at this time.
Sponsored by: DARPA & NAI Labs.
Approved by: re
the old 8-bit fs_old_flags to the new location the first time that the
filesystem is mounted by a new kernel. One of the unused flags in
fs_old_flags is used to indicate that the flags have been moved.
Leave the fs_old_flags word intact so that it will work properly if
used on an old kernel.
Change the fs_sblockloc superblock location field to be in units
of bytes instead of in units of filesystem fragments. The old units
did not work properly when the fragment size exceeeded the superblock
size (8192). Update old fs_sblockloc values at the same time that
the flags are moved.
Suggested by: BOUWSMA Barry <freebsd-misuser@netscum.dyndns.dk>
Sponsored by: DARPA & NAI Labs.
rules don't apply to tokens that are supposed to represent single args.
This was only fixed in the man page.
Fixed other differences between the man page and the usage message (1
formatting bug and 1 syntax bug).
and -Wformat warnings:
o Include timeconv.h for the time conversion functions.
o Remove unused variables.
o Correct a few cases where %d was used when printing longs.
filesystem expands the inode to 256 bytes to make space for 64-bit
block pointers. It also adds a file-creation time field, an ability
to use jumbo blocks per inode to allow extent like pointer density,
and space for extended attributes (up to twice the filesystem block
size worth of attributes, e.g., on a 16K filesystem, there is space
for 32K of attributes). UFS2 fully supports and runs existing UFS1
filesystems. New filesystems built using newfs can be built in either
UFS1 or UFS2 format using the -O option. In this commit UFS1 is
the default format, so if you want to build UFS2 format filesystems,
you must specify -O 2. This default will be changed to UFS2 when
UFS2 proves itself to be stable. In this commit the boot code for
reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c)
as there is insufficient space in the boot block. Once the size of the
boot block is increased, this code can be defined.
Things to note: the definition of SBSIZE has changed to SBLOCKSIZE.
The header file <ufs/ufs/dinode.h> must be included before
<ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and
ufs_lbn_t.
Still TODO:
Verify that the first level bootstraps work for all the architectures.
Convert the utility ffsinfo to understand UFS2 and test growfs.
Add support for the extended attribute storage. Update soft updates
to ensure integrity of extended attribute storage. Switch the
current extended attribute interfaces to use the extended attribute
storage. Add the extent like functionality (framework is there,
but is currently never used).
Sponsored by: DARPA & NAI Labs.
Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
for monitoring automated backups. This is based on a patch by Mikhail
Teterin, with some changes to make its operation clearer and to
update the proctitle more frequently.
PR: bin/32138
time_to_xxx() and xxx_to_time() functions. e.g. _time_to_xxx()
instead of time_to_xxx(), to make it more obvious that these are
stopgap functions & placemarkers and not meant to create a defacto
standard. They will eventually be replaced when a real standard
comes out of committee.
