Commit Graph

124 Commits

Author SHA1 Message Date
John Baldwin
e27951b29c Use PCIR_BAR(x) instead of PCIR_MAPS.
Glanced over by:	imp, gibbs
Tested by:		i386 LINT
2003-09-02 17:30:40 +00:00
Martin Blapp
4a80e74bf3 All davicom cards seem to need DC_TX_ALIGN. 2003-08-27 08:13:34 +00:00
Martin Blapp
7dfdc26c46 Make TX on davicom 9102A working again. This chip needs
its mbufs aligned on TX.

PR:		53656, 42714
MFC after:	3 days
2003-08-24 23:47:44 +00:00
Warner Losh
19b7ffd1b8 Prefer new location of pci include files (which have only been in the
tree for two or more years now), except in a few places where there's
code to be compatible with older versions of FreeBSD.
2003-08-22 07:20:27 +00:00
Sam Leffler
c06eb4e293 Change instances of callout_init that specify MPSAFE behaviour to
use CALLOUT_MPSAFE instead of "1" for the second parameter.  This
does not change the behaviour; it just makes the intent more clear.
2003-08-19 17:51:11 +00:00
Maxime Henrion
aafb3ebbe3 Use the BUS_DMA_ZERO flag. 2003-07-27 14:00:02 +00:00
Warner Losh
4c16d09eda Add support for FA-511; Submitted by: Kenneth P. Stox; Pr 42858 2003-07-19 06:01:15 +00:00
Bill Paul
e7b9ab3aaa Add support for a bunch of Microsoft networking products:
- MN-110 10/100 USB ethernet (ADMtek Pegasus II, if_aue)
- MN-120 10/100 cardbus (ADMtek Centaur-C, if_dc)
- MN-130 10/100 PCI (ADMtek Centaur-P, if_dc)

Also update dc(4) man page to mention support for MN-120 and MN-130.
2003-07-10 18:43:17 +00:00
Maxime Henrion
af4358c71e Make the dc(4) driver endian-clean, so to that it works on sparc64.
There are such cards in Netra X1 boxes, which should thus be fully
supported now.

Tested by:	jake
2003-07-09 15:03:10 +00:00
Maxime Henrion
56e5e7ae57 Convert the dc(4) driver to the busdma API. This is a necessary step
to have this driver working on sparc64.  It still needs to be made
endian-clean before it can work there.

Special thanks to dragonk@evilcode.net for sending me a dc(4) card so
that I was able to do this work.

Many cheers to all the people that tested this change, thanks to them,
this change shouldn't break anything :-).

Tested by:	marcel (i386 and ia64), ru (i386), wilko (alpha),
		mbr (i386), wpaul (i386) and
		Will Saxon <WillS@housing.ufl.edu> (i386)
2003-07-06 21:45:31 +00:00
Maxime Henrion
3d6ae7e047 Fix a bug that could cause dc(4) to m_freem() an already freed
mbuf or something that isn't an mbuf.

MFC after:	3 days
2003-07-06 14:39:45 +00:00
Maxime Henrion
b3811c9583 Various style(9) and readability fixes. 2003-07-06 14:36:33 +00:00
Warner Losh
b84e866a18 Due to extreme bogusness in the pci bus layer, these drivers were
forced to do slightly bogus power state manipulation.  However, this
is one of those features that is preventing further progress, so mark
them as BURN_BIRDGES like I did for the drivers in sys/dev/...

This, like the other change, are a no-op unless you have BURN_BRIDGES
in your kernel.
2003-07-03 21:39:53 +00:00
Martin Blapp
e351d778f2 Add ADMtek ADM9511 and ADM9513 device ID's.
PR:		PR51823
Submitted by:	Kaho Toshikazu <kaho@elam.kais.kyoto-u.ac.jp>
Reviewed by:	phk
MFC after:	2 days
2003-06-08 10:11:55 +00:00
Maxime Henrion
1edc4c46b8 Change a :
bzero(ptr, sizeof(DC_RXLEN * 5));
which should obviously be:
	bzero(ptr, DC_RXLEN * 5);

Looks like this bug may have reduced the effectiveness of the
workaround for the hardware bug in the PNIC chips.

MFC after:	1 week
2003-06-01 22:09:12 +00:00
Maxime Henrion
0934f18afb - Style(9) fixes, most notably :
o Remove register keyword
	o ANSIfy prototypes
	o Remove "return;" at the end of void functions
	o Remove trailing spaces
	o Don't align local variables with tabs and reorder them
	o Don't use /* FOO */ at the end of a #ifdef FOO block if
	  it's a small block
- Other non-functional changes :
	o 6 -> ETHER_ADDR_LEN
	o Don't initialize if_output; ether_ifattach() does it for us
2003-06-01 19:26:34 +00:00
Martin Blapp
f956e0b3f0 Only use a SIA/SYM media info block if no MII block is detected.
The submitter of PR 32118 told me that this patch also fixes autoselecting
for znyx 4 port cards (10baseT, 100baseTX did work already).

PR:		32118
Reviewed by:	imp
Approved by:	rwatson (re)
2003-05-15 16:53:29 +00:00
Martin Blapp
7eac366be1 Add support for 3Com OfficeConnect 10/100B.
PR:		49059, 50747
Submitted by:	Dax Eckenberg <daxbert@dweebsoft.com>
Reviewed by:	imp, jhb
Approved by:	jhb
MFC after:	2 weeks
2003-05-12 19:50:21 +00:00
Martin Blapp
acc1bccccd Use only a 64bit hash filter table for ADM-Centaur cards like the
Accton EN2242 and the ADMtek AN985 cards.

PR:		32699
Submitted by:	Jean-Luc Richier <Jean-Luc.Richier@imag.fr>
Reviewed by:	phk
MFC after:	2 weeks
2003-05-01 09:31:01 +00:00
Warner Losh
214073e5e4 Use newly minted device_is_attached rather than device_is_alive to see
if attach succeeded.  device_is_alive just tells us that probe
succeeded.  Since we were using it to do things like detach net
interfaces, this caused problems when there were errors in the attach
routine.

Symptoms of problem reported by: martin blapp
2003-04-21 18:34:04 +00:00
MIHIRA Sanpei Yoshiro
97f9172896 Add support for Planex FNW-3602-T(CardBus 100M/10M).
Submitted by:	kazz <kazz@v001.vaio.ne.jp>
Obtained from:	[bsd-nomads:16637]
2003-04-18 15:42:25 +00:00
Nate Lawson
693f4477b1 Revise attach/detach resource cleanup
- Unconditionally call *_stop() if device is in the tree. This is to
  prevent callouts from happening after the device is gone. Checks for
  bus_child_present() should be added in the future to keep from touching
  potentially non-existent hardware in *_detach().  Found by iedowse@.
- Always check for and free miibus children, even if the device is not in
  the tree since some failure cases could have gotten here.
- Call ether_ifdetach() in the irq setup failure case
- ti(4), xl(4): move ifmedia_init() calls to the beginning of attach so
  that ifmedia_removeall() can be unconditionally called on detach. There
  is no way to detect whether ifmedia has been initialized without using
  a separate variable (as tl(4) does).
- Add comments to indicate assumptions of code path
2003-04-17 20:32:06 +00:00
Ian Dowse
2ea36df806 Revert part of revision 1.97 by calling dc_stop() unconditionally
in dc_detach() instead of only calling it if the hardware is preset.
This is a workaround for page faults in softclock() after a `dc'
device was detached, caused by not disabling a timer before freeing
its memory. The bus_child_present() checks should probably be
re-added later, but only to avoid the hardware accesses and not the
other resource cleanups in dc_stop().

Approved by:	njl
2003-04-17 08:36:52 +00:00
Matthew N. Dodd
533294b956 - Don't call pci_enable_io() in drivers (unless needed for resume).
- Don't test memory/port status and emit an error message; the PCI
  bus code will do this now.
2003-04-16 03:16:57 +00:00
Matthew N. Dodd
f246e4a17f - Express hard dependencies on bus (pci, isa, pccard) and
network layer (ether).
- Don't abuse module names to facilitate ifconfig module loading;
  such abuse isn't really needed.  (And if we do need type information
  associated with a module then we should make it explicit and not
  use hacks.)
2003-04-15 06:37:30 +00:00
David E. O'Brien
8368cf8f75 Use __FBSDID rather than rcsid[]. 2003-04-03 21:36:33 +00:00
John Baldwin
59f47d29b7 Add missing ()'s so that these drivers all compile again.
Noticed by:	jake
Tested on:	i386 (compile)
2003-03-31 20:22:00 +00:00
Nate Lawson
54f1f1d1e6 Clean up locking and resource management for pci/if_*
- Remove locking of the softc in the attach method, instead depending on
  bus_setup_intr being at the end of attach (delaying interrupt enable until
  after ether_ifattach is called)
- Call *_detach directly in the error case of attach, depending on checking
  in detach to only free resources that were allocated.  This puts all
  resource freeing in one place, avoiding thinkos that lead to memory leaks.
- Add bus_child_present check to calls to *_stop in the detach method to
  be sure hw is present before touching its registers.
- Remove bzero softc calls since device_t should do this for us.
- dc: move interrupt allocation back where it was before.  It was unnecessary
  to move it.  This reverts part of 1.88
- rl: move irq allocation before ether_ifattach.  Problems might have been
  caused by allocating the irq after enabling interrupts on the card.
- rl: call rl_stop before ether_ifdetach
- sf: call sf_stop before ether_ifdetach
- sis: add missed free of sis_tag
- sis: check errors from tag creation
- sis: move dmamem_alloc and dmamap_load to happen at same time as tag creation
- sk: remove duplicate initialization of sk_dev
- ste: add missed bus_generic_detach
- ti: call ti_stop before ether_ifdetach
- ti: add missed error setting in ti_rdata alloc failure
- vr: add missed error setting in I/O, memory mapping cases
- xl: add missed error setting in I/O, memory mapping cases
- xl: remove multi-level goto on attach failure
- xl: move dmamem_alloc and dmamap_load to happen at same time as tag creation
- Calls to free(9) are unconditional because it is valid to call free with a
  null pointer.

Reviewed by:	imp, mdodd
2003-03-31 17:29:43 +00:00
Mike Silbersack
cda97c506e Update if_dc to use m_defrag, removing the semi-duplicate dc_coal
function.

Also, use m_defrag where appropriate to defrag long mbuf chains
in the same fashion as was done in if_sis.c.  Before this change,
if_dc would blow up and take down the interface if fed a really long
mbuf chain.

MFC after:	2 weeks
2003-03-29 21:27:07 +00:00
Matthew N. Dodd
868d8b6286 - Use if_broadcastaddr from struct ifnet rather than relying on
extern 'etherbroadcastaddr'.
- Make 'etherbroadcastaddr' static.

Reviewed by:	 imp
2003-03-21 17:53:16 +00:00
Warner Losh
a163d034fa Back out M_* changes, per decision of the TRB.
Approved by: trb
2003-02-19 05:47:46 +00:00
Warner Losh
6d0dd93192 Minor correction to comment: PNIC and XIRCOM have eeprom, its just
non-standard.
2003-02-12 07:16:15 +00:00
Martin Blapp
eecb384463 Fix the breakage resulting from Rev. 1.80. Get the eeprom width
for all but two cards. This should fix broken cards like these:

DM9102 (Davicom, DEVICE_ID: 0x9002)
DM9009 (Davicom, DEVICE_ID: 0x9009)
DM9100 (Davicom, DEVICE_ID: 0x9100)
98713/98713_CP (Macronix PMAC, DEVICE_ID: 0x0512)
98713_CP (Macronix PMAC, DEVICE_ID: 0x0512)
987x5 (Macronix PMAC, DEVICE_ID: 0x0531)
98727  (Macronix PMAC, DEVICE_ID: 0x0532)
82C115 (Lite-On PNIC II, DEVICE_ID: 0xc115)
AX88140A (ASIX Dev_ID: DEVICE_ID: 0x1400)
EN1217 (Accton EN1217, DEVICE_ID: 0x1217)

Note that these cards sould still work in STABLE.

Reviewed by:	imp
2003-02-07 23:12:51 +00:00
Martin Blapp
259b8d8489 Add missing braces.
Found by:       FlexeLint (phk)
Reviewed by:	wpaul, phk
2003-02-07 13:55:02 +00:00
Martin Blapp
028a849180 Move the DC_SETBIT to the attach function.
Reviewed by:		phk
2003-02-05 21:21:26 +00:00
Alfred Perlstein
44956c9863 Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.
2003-01-21 08:56:16 +00:00
Nate Lawson
608654d473 Remove bogus locking from dc(4). Instead, move interrupt allocation
and ether_ifattach() to end.  This fixes a "could sleep" case and
simplifies error exit cases as well.  Also be sure to set errno
and clean up resources in !mac error case.

Tested by:	Ryan Beasley
2003-01-14 19:31:27 +00:00
Warner Losh
948c244d94 Add preliminary support for the Hawking PN672TX CardBus cards.
# Preliminary because there are some subtle things the NetBSD driver does
# that we don't do yet.  My card works for me w/o them.
2003-01-10 05:37:15 +00:00
Tom Rhodes
38deb45fc3 Add support for the Davicom DM9009 chipset.
PR:		46859
Submitted by:	Boaz Haberman <boaz@ool-182f8b09.dyn.optonline.net>
Approved by:	rwatson
2003-01-09 20:51:39 +00:00
Warner Losh
e7b01d0727 Xircom cards store the MAC address in the CIS, so get it from the new
pci_get_ether accesor, which gets it from the CIS for cardbus cards
(and from other pci-like buses via whatever mechanism is used there).

Submitted by: sam
Approved by: re (blanket)
2002-11-27 07:04:10 +00:00
Luigi Rizzo
5d6dfbbb5e Fix handling of IFF_ALLMULTI. The same bug in various forms affects
the following drivers:

    dc mn sf sk ste ti tl xl an bge em gem gx ie lge sr aue cue kue wi xe

Approved by: re
2002-11-25 19:28:01 +00:00
Sam Leffler
9ef8b52020 o track either_ifattach/ether_ifdetach API changes
o use if_input for input packet processing
o don't strip the Ethernet header for input packets
o use BPF_* macros bpf tapping
o call ether_ioctl to handle default ioctl case
o track vlan changes

Reviewed by:	many
Approved by:	re
2002-11-14 23:49:09 +00:00
Poul-Henning Kamp
2c876e15c8 Be consistent about functions being static.
Spotted by:	FlexeLint.
2002-10-16 09:04:52 +00:00
Warner Losh
7efff076f4 Ooops. Need to free dc_srom on detach to not leak memory.
Pointy Hat to: The Mad Redhead of Niwot
2002-10-07 05:29:13 +00:00
Warner Losh
3097aa70be Dynamically configure the width of the srom. This code comes from
OpenBSD who got the code (or the idea) from the NetBSD tlp driver.

This gets some cardbus dc cards working (either completely or nearly
so).  It also appears to get additional pci cards working, without
breaking working ones.

# Maybe some additional work is needed here.  Also, the cardbus attachment
# might need to match on the CIS rather than on the vendor/device so we have
# a finer level of detail as to what the card is.  Technically, the
# vendor/device fields are undefined for CardBus (even though most cards are
# using common silicon with pci models).
2002-10-07 05:26:35 +00:00
Martin Blapp
351267c186 Fix the support for the AN985/983 chips, which do not set the
RXSTATE to STOPPED, but to WAIT. This should fix hangs which
could only be solved by replugging the cable.

Submitted by:	jhb
Reviewed by:	phk
MFC after:	2 weeks
2002-09-20 15:18:13 +00:00
Martin Blapp
7e346229db Enable the automatic TX underrun recovery for the ADMtek chips.
This solves cvsup update on my laptop which aborts after a while
without this patch.

PR:		34236
Reviewed by:	phk
MFC after:	2 weeks
2002-09-20 15:16:06 +00:00
Mark Murray
3ecba1c115 Make consistent; turn spaces into tabs where there is a mixture. 2002-09-04 18:14:17 +00:00
Alfred Perlstein
e3d2833a26 style:
put return values on a line by themselves.
 fix some paste issues where whitespace was used instead of tabs.
2002-08-23 23:49:02 +00:00
Maxim Sobolev
62f7648682 Increase size of ifnet.if_flags from 16 bits (short) to 32 bits (int). To avoid
breaking application ABI use unused ifreq.ifru_flags[1] for upper 16 bits in
SIOCSIFFLAGS and SIOCGIFFLAGS ioctl's.

Reviewed by:	-hackers, -net
2002-08-18 07:05:00 +00:00