sbin/fsck_msdosfs/fat.c:
- readfat:
* Only truncate out-of-range cluster pointers (1, or greater than
NumClusters but smaller than CLUST_RSRVD), as the current cluster
may contain some data. We can't fix reserved cluster pointers at
this pass, because we do no know the potential cluster preceding
it.
* Accept valid cluster for head bitmap. This is a no-op, and mainly
to improve code readability, because the 1 is already handled in
the previous else if block.
- truncate_at: absorbed into checkchain.
- checkchain: save the previous node we have traversed in case that we
have a chain that ends with a special (>= CLUST_RSRVD) cluster, or is
free. In these cases, we need to truncate at the cluster preceding the
current cluster, as the current cluster contains a marker instead of
a next pointer and can not be changed to CLUST_EOF (the else case can
happen if the user answered "no" at some point in readfat()).
- clearchain: correct the iterator for next cluster so that we don't
stop after clearing the first cluster.
- checklost: If checkchain() thinks the chain have no cluster, it
doesn't make sense to reconnect it, so don't bother asking.
Reviewed by: kevlo
MFC after: 24 days
X-MFC-With: r356313
Differential Revision: https://reviews.freebsd.org/D23065
In the code we used NumClusters as the upper (non-inclusive) boundary
of valid cluster number, so the actual value was 2 (CLUST_FIRST) more
than the real number of clusters. This causes a FAT16 media with
65524 clusters be treated as FAT32 and might affect FAT12 media with
4084 clusters as well.
To fix this, we increment NumClusters by CLUST_FIRST after the type
determination.
PR: 243179
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D23082
Add an option flag so that arbitrary updates to a lagg's configuration
do not clear sc_stride. Preseve compatibility for old ifconfig
binaries. Update ifconfig to use the new flag and improve the casting
used when parsing the option parameter.
Modify the RR transmit function to avoid locklessly reading sc_stride
twice. Ensure that sc_stride is always 1 or greater.
Reviewed by: hselasky
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23092
This is a re-apply r356249 with changes to make GCC happy.
This utility was initially written for FAT12/16, which were inherently
small. When FAT32 support was added, the old data structure and
algorithms remain used with minimal changes.
With growing size of FAT32 media, the current data structure that
requires 4 32-bit variables per each FAT32 table entry would consume up
to 4 GiB of RAM, which can be too big for systems with limited RAM
available.
Address this by taking a different approach of validating the FAT.
The FAT is essentially a set of linked lists of chains that was
referenced by directory entries, and the checker needs to make sure that
the linked chains of clusters do not have cross-linked chains, and every
chain were referenced by one and only one directory entry. Instead of
keeping track of the chain's 'head' cluster number, the size of the
chain, the used status of the chain and the "next" pointer which is
content of the FAT table, we create accessors for the FAT table data
for the "next" pointer, and keep only one bit to indicate if the
current cluster is a 'head' node of a cluster chain, in a bitmap.
We further overhaul the FAT checker to find out the possible head nodes
by excluding ones that are not (in other words, nodes that have some
other nodes claiming them as the next node) instead of marking the head
nodes for each node on the chain. This approach greatly reduced the
complexiety of computation from O(N^2) worst case, to an O(N) scan for
worst case. The file (cluster chain) length is not useful for the FAT
checker, so don't bother to calculate them in the FAT checker and
instead leave the task to the directory structure check, at which point
we would have non-crossed cluster chains, and we are guaranteed that
each cluster will be visited for at most one time.
When checking the directory structures, we use the head node indicator
to as the visited (used) flag: every cluster chain can only be
referenced by one directory entry, so we clear them when calculating
the length of the chain, and we can immediately tell if there are
anomalies in the directory entry.
As a result, the required RAM size is now 1 bit per each entry of
the FAT table, plus memory needed to hold the FAT table in memory,
instead of 16 bytes (=128 bits) per each entry. For FAT12 and FAT16,
we will load the whole FAT table into memory as they are smaller than
128KiB, and for FAT32, we first attempt to mmap() it into memory, and
when that fails, we would fall back to a simple LRU cache of 4 MiB of
RAM.
sbin/fsck_msdosfs/boot.c:
- Added additional sanity checks for valid FAT32/FAT16/FAT12 cluster
number.
- FAT32: check if root directory starts with a valid cluster number,
moved from dir.c. There is no point to proceed if the filesystem
is already damaged beyond repair.
sbin/fsck_msdosfs/check.c:
- Combine phase 1 and phase 2, now that the readfat() is able to
detect cross chains.
sbin/fsck_msdosfs/dir.c:
- Refactor code to use FAT accessor instead of accessing the internal
representation of FAT table.
- Make use of the cluster chain head bitmap.
- Clarify and simplify directory entry check, remove unnecessary
checks that are would be done at a later time (for example, whether
the directory's second cluster is a valid one, which is examined
more throughly in a later checkchain() and does not prevent us
from proceeding further).
sbin/fsck_msdosfs/dosfs.h:
- Remove internal representation of FAT table, which is replaced by
the head bitmap that is opaque to other code.
- Added a special CLUST_DEAD cluster type to indicate errors.
sbin/fsck_msdosfs/ext.h:
- Added a flag that overrides mmap(2) setting. The corresponding
command line option, -M is intentionally undocumented as we do not
expect users to need it.
- Added accessors for FAT table and convert existing interface to use
it.
sbin/fsck_msdosfs/fat.c:
- Added head bitmap to represent whether a cluster is a head cluster.
- Converted FAT internal representation to accessors.
- Implemented a LRU cache for FAT32 when mmap(2) should not or can not
be used.
- _readfat: Attempt a mmap(2) and fall back to regular read for
non-FAT32 file systems; use the LRU cache for FAT32 and prepopulate
the cache with the first 4MiB of the entries.
- readfat: Added support of head bitmap and use the population scan to
detect bogus chains.
- clusterdiff: removed, FATs are copied from the checked copy via
writefat()/copyfat().
- checkchain: calculates the length of a cluster chain and make sure
that it ends with a valid EOF marker.
- clearchain: follow and clear a chain and maintain the free cluster
count.
- checklost: convert to use head bitmap. At the end of all other scans,
the remaining 'head' nodes are leaders of lost cluster chains.
sbin/fsck_msdosfs/fat.c:
- Added a new -M option which is intentionally undocumented, to disable
the use of mmap().
Reviewed by: kevlo
MFC after: 1 month
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D22965
When removing a boot environment iterate over the dependents and process the
snapshots by grabbing any clones. Promote the clones we found and then
remove the target environment.
This fixes the ability to destroy a boot environment when it has been used
to spawn one or more other boot environments.
PR: 242592
Submitted by: Wes Maag <jwmaag gmail com> (with changes by myself)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D22953
This utility was initially written for FAT12/16, which were inherently
small. When FAT32 support was added, the old data structure and
algorithms remain used with minimal changes.
With growing size of FAT32 media, the current data structure that
requires 4 32-bit variables per each FAT32 table entry would consume up
to 4 GiB of RAM, which can be too big for systems with limited RAM
available.
Address this by taking a different approach of validating the FAT.
The FAT is essentially a set of linked lists of chains that was
referenced by directory entries, and the checker needs to make sure that
the linked chains of clusters do not have cross-linked chains, and every
chain were referenced by one and only one directory entry. Instead of
keeping track of the chain's 'head' cluster number, the size of the
chain, the used status of the chain and the "next" pointer which is
content of the FAT table, we create accessors for the FAT table data
for the "next" pointer, and keep only one bit to indicate if the
current cluster is a 'head' node of a cluster chain, in a bitmap.
We further overhaul the FAT checker to find out the possible head nodes
by excluding ones that are not (in other words, nodes that have some
other nodes claiming them as the next node) instead of marking the head
nodes for each node on the chain. This approach greatly reduced the
complexiety of computation from O(N^2) worst case, to an O(N) scan for
worst case. The file (cluster chain) length is not useful for the FAT
checker, so don't bother to calculate them in the FAT checker and
instead leave the task to the directory structure check, at which point
we would have non-crossed cluster chains, and we are guaranteed that
each cluster will be visited for at most one time.
When checking the directory structures, we use the head node indicator
to as the visited (used) flag: every cluster chain can only be
referenced by one directory entry, so we clear them when calculating
the length of the chain, and we can immediately tell if there are
anomalies in the directory entry.
As a result, the required RAM size is now 1 bit per each entry of
the FAT table, plus memory needed to hold the FAT table in memory,
instead of 16 bytes (=128 bits) per each entry. For FAT12 and FAT16,
we will load the whole FAT table into memory as they are smaller than
128KiB, and for FAT32, we first attempt to mmap() it into memory, and
when that fails, we would fall back to a simple LRU cache of 4 MiB of
RAM.
sbin/fsck_msdosfs/boot.c:
- Added additional sanity checks for valid FAT32/FAT16/FAT12 cluster
number.
- FAT32: check if root directory starts with a valid cluster number,
moved from dir.c. There is no point to proceed if the filesystem
is already damaged beyond repair.
sbin/fsck_msdosfs/check.c:
- Combine phase 1 and phase 2, now that the readfat() is able to
detect cross chains.
sbin/fsck_msdosfs/dir.c:
- Refactor code to use FAT accessor instead of accessing the internal
representation of FAT table.
- Make use of the cluster chain head bitmap.
- Clarify and simplify directory entry check, remove unnecessary
checks that are would be done at a later time (for example, whether
the directory's second cluster is a valid one, which is examined
more throughly in a later checkchain() and does not prevent us
from proceeding further).
sbin/fsck_msdosfs/dosfs.h:
- Remove internal representation of FAT table, which is replaced by
the head bitmap that is opaque to other code.
- Added a special CLUST_DEAD cluster type to indicate errors.
sbin/fsck_msdosfs/ext.h:
- Added a flag that overrides mmap(2) setting. The corresponding
command line option, -M is intentionally undocumented as we do not
expect users to need it.
- Added accessors for FAT table and convert existing interface to use
it.
sbin/fsck_msdosfs/fat.c:
- Added head bitmap to represent whether a cluster is a head cluster.
- Converted FAT internal representation to accessors.
- Implemented a LRU cache for FAT32 when mmap(2) should not or can not
be used.
- _readfat: Attempt a mmap(2) and fall back to regular read for
non-FAT32 file systems; use the LRU cache for FAT32 and prepopulate
the cache with the first 4MiB of the entries.
- readfat: Added support of head bitmap and use the population scan to
detect bogus chains.
- clusterdiff: removed, FATs are copied from the checked copy via
writefat()/copyfat().
- checkchain: calculates the length of a cluster chain and make sure
that it ends with a valid EOF marker.
- clearchain: follow and clear a chain and maintain the free cluster
count.
- checklost: convert to use head bitmap. At the end of all other scans,
the remaining 'head' nodes are leaders of lost cluster chains.
sbin/fsck_msdosfs/fat.c:
- Added a new -M option which is intentionally undocumented, to disable
the use of mmap().
Reviewed by: kevlo
MFC after: 1 month
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D22965
When mount_nfs calls nmount(2), certain NFSv4 specific errors such as
NFSERR_MINORVERMISMATCH can be returned.
Without this patch, 10021 is reported as an unknown error.
This is not particulcarily serious, but make it difficult for sysadmins
to figure out why the mount attempt is failing.
This patch uses nfsv4_errstr.h to convert 10021 and similar to error strings
that can be printed out.
A positive side effect of this patch is the removal of a reference to
sys/nfsclient/nfs.h, which should no longer be used, since it is
part of the old NFS client.
This patch should only affect reporting of failed mount attempts and not the
semantics of NFS mount attempts.
USE JOURNAL? [yn]
when the journal timestamp does not match the filesystem mount time
as we are just going to print an error and fall through to a full fsck.
Instead, just run a full fsck.
Requested by: Bjoern A. Zeeb (bz)
MFC after: 7 days
- Don't allow an unprivileged user to set the stride. [1]
- Only set the stride under the softc lock.
- Rename the internal fields to accurately reflect their use. Keep
ro_bkt to avoid changing the user API.
- Simplify the implementation. The port index is just sc_seq / stride.
- Document rr_limit in ifconfig.8.
Reported by: Ilja Van Sprundel <ivansprundel@ioactive.com> [1]
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D22857
This avoids gcc9 warning about unaligned access to the structure when
casting to uint16_t pointer type.
Submitted by: imp
Reviewed by: imp
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D22888
I was unable to find time when those were working. I think they have been
broken for at least 5 years or even longer.
Discussed with: avg@
MFC after: 1 month
It seems I read specifications not careful enough. There are devices not
setting successful completion bit, causing previous code report false error.
MFC after: 1 week
r355677 added NFSv4.2 support to the NFS client. This patch updates the
mount_nfs.8 man page to reflect that.
It also clarifies that the "nolockd" option does not apply to NFSv4 mounts.
This is a content change.
Warn users when they try to add/delete/modify more items than the kernel will
allow.
Reviewed by: allanjude (previous version), Lutz Donnerhacke
Differential Revision: https://reviews.freebsd.org/D22733
Due to off-by-one error in brackets counting it consumed the rest of the
string, preventing later variables expansions.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Remove single use of dubious srandomdev(3) + random(3) and replace with
arc4random(3), as is used already in this program.
Follow-up question: Do we really need this program anymore? In base?
Update a bunch of Makefile.depend files as
a result of adding Makefile.depend.options files
Reviewed by: bdrewery
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org/D22494
Leaf directories that have dependencies impacted
by options need a Makefile.depend.options file
to avoid churn in Makefile.depend
DIRDEPS for cases such as OPENSSL, TCP_WRAPPERS etc
can be set in local.dirdeps-options.mk
which can add to those set in Makefile.depend.options
See share/mk/dirdeps-options.mk
Reviewed by: bdrewery
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org/D22469
- Do not unnecessarily strdup().
- Check return value of getdiskinfo(), if it failed, bail out.
Reviewed by: imp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D22729
o Remove All Rights Reserved from my notices
o imp@FreeBSD.org everywhere
o regularize punctiation, eliminate date ranges
o Make sure that it's clear that I don't claim All Rights reserved by listing
All Rights Reserved on same line as other copyright holders (but not
me). Other such holders are also listed last where it's clear.
The previous revision missed the exact same error in a copy paste block
of the same code in another function. Fix the identical case, too.
A DHCP client identifier is simply the hardware type (one byte)
concatenated with the hardware address (some variable number of bytes,
but at most 16). Limit the size of the temporary buffer to match and
the rest of the calculations shake out correctly.
PR: 238022
Reported by: Young <yangx92 AT hotmail.com>
Submitted by: Young <yangx92 AT hotmail.com>
MFC after: I don't plan to but you should feel free
Security: yes
Before my refactoring the code reported value as maximum number of sectors,
adding one to the maximum sector number returned by respective command.
While this difference is somewhat confusing, restore previous behavior.
MFC after: 3 days
Previously the mkfs_msdos function (from newfs_msdos) emitted warnings
in the case that an image size is specified and the target is not a
file, or no size is specified and the target is not a character device.
The latter warning (not a character device) doesn't make sense when this
code is used in makefs, regardless of whether an image size is specified
or not.
Sponsored by: The FreeBSD Foundation
mdmfs(8) lacks the ability to populate throwaway memory filesystems from an
existing directory.
This features permits an interesting setup where /var for instance lives on
a device where wear-leveling is something you want to avoid as much as
possible and nonetheless you don't want to lose your logs, ports metadata,
etc. Here are the steps:
1. Copy /var to /var.bak;
2. Mount an mfs into /var using -k /var.bak at startup;
3. Synchronize /var to /var.bak weekly and on shutdown.
Note that this more or less mimics OpenBSD's mount_mfs(8) -P flag.
PR: 146254
Submitted by: jlh (many moons ago)
MFC after: 1 week
This corrects an oversight from r351423.
Submitted by: Ján Sučan <sucanjan@gmail.com>
MFC after: Never
Differential Revision: https://reviews.freebsd.org/D22093
The change is for the example in textdump.4 and the default ddb.conf.
First of all, doadump now requires an argument and it won't do a
textdump if the argument is not 'true'.
And 'textdump dump' is more idiomatic anyway.
For what it's worth, ddb 'dump' command seems to always request a vmcore
dump even if a textdump was requested earlier, e.g., by 'textdump set'.
Finally, ddb 'call' command is not documented.
MFC after: 2 weeks
-o will force the origin to be destroyed unconditionally.
BE_DESTROY_AUTOORIGIN, on the other hand, will only destroy the origin if it
matches the format used by be_snapshot. This lets us clean up the snapshots
that are clearly not user-managed (because we're creating them) while
leaving user-created snapshots in place and warning that they're still
around when the BE created goes away.
By default next_cmd() initializes only first u32 of opcode. O_ICMP6TYPE
opcode has array of bit masks to store corresponding ICMPv6 types.
An opcode that precedes O_ICMP6TYPE, e.g. O_IP6_DST, can have variable
length and during opcode filling it can modify memory that will be used
by O_ICMP6TYPE opcode. Without explicit initialization this leads to
creation of wrong opcode.
Reported by: Boris N. Lytochkin
Obtained from: Yandex LLC
MFC after: 3 days
This change allows to specify a watchdog(9) timeout for a system
shutdown. The timeout is activated when the watchdogd daemon is
stopped. The idea is to a prevent any indefinite hang during late
stages of the shutdown. The feature is implemented in rc.d/watchdogd,
it builds upon watchdogd -x option.
Note that the shutdown timeout is not actiavted when the watchdogd
service is individually stopped by an operator. It is also not
activated for the 'shutdown' to the single-user mode. In those cases it
is assumed that the operator knows what they are doing and they have
means to recover the system should it hang.
Significant subchanges and implementation details:
- the argument to rc.shutdown, completely unused before, is assigned to
rc_shutdown variable that can be inspected by rc scripts
- init(8) passes "single" or "reboot" as the argument, this is not
changed
- the argument is not mandatory and if it is not set then rc_shutdown is
set to "unspecified"
- however, the default jail management scripts and jail configuration
examples have been updated to pass "jail" to rc.shutdown, just in case
- the new timeout can be set via watchdogd_shutdown_timeout rc option
- for consistency, the regular timeout can now be set via
watchdogd_timeout rc option
- watchdogd_shutdown_timeout and watchdogd_timeout override timeout
specifications in watchdogd_flags
- existing configurations, where the new rc options are not set, should
keep working as before
I am not particularly wed to any of the implementation specifics.
I am open to changing or removing any of them as long as the provided
functionality is the same (or very close) to the proposed one.
For example, I think it can be implemented without using watchdogd -x,
by means of watchdog(1) alone. In that case there would be a small
window between stopping watchdogd and running watchdog, but I think that
that is acceptable.
Reviewed by: bcr (man page changes)
MFC after: 5 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D21221
The kernel won't crash if you have a bad value and I'd rather not have
nvmecontrol know the internal details about how the nvme driver limits
the transfer size.
addition, the flags are optional, but were made to be mandatory. Set
these things, as well as santiy check the specified size.
Submitted by: Stefan Rink
PR: 240798
The two options are
* nocover/cover: Prevent/allow mounting over an existing root mountpoint.
E.g., "mount -t ufs -o nocover /dev/sd1a /usr/local" will fail if /usr/local
is already a mountpoint.
* emptydir/noemptydir: Prevent/allow mounting on a non-empty directory.
E.g., "mount -t ufs -o emptydir /dev/sd1a /usr" will fail.
Neither of these options is intended to be a default, for historical and
compatibility reasons.
Reviewed by: allanjude, kib
Differential Revision: https://reviews.freebsd.org/D21458
ping(8) uses SO_TIMESTAMP, which attaches a timestamp to each IP datagram at
the time it's received by the kernel. Except that occasionally it doesn't.
Add a check to see whether such a timestamp was actually set before trying
to read it. This fixes segfaults that can happen when the kernel doesn't
attach a timestamp.
The bug has always existed, but prior to r351461 it manifested as an
implausible round-trip-time, not a segfault.
Reported by: pho
MFC after: 3 days
MFC-With: 351461
':'. It's slightly wasteful, but much easier (and the savings in bytes
at runtime would be tiny, but the code to do it larger).
Submitted by: Sebastian Huber
This command simply returns 0 at the moment and explicitly takes no
arguments. This should be used by utilities wanting to see if bectl can
operate on the system they're running, or with a specific root (`bectl -r`).
It may grow more checks than "will libbe successfully init" in the future,
but for now this is enough as that checks for the dataset mounted at "/" and
that it looks capable of being a BE root (e.g. it's not a top-level dataset)
bectl commands can now specify if they want to be silent, and this will turn
off libbe_print_on_error so they can control the output as needed. This is
already used in `bectl check`, and may be turned on in the future for some
other commands where libbe errors are better suppressed as the failure mode
may be obvious.
Requested by: David Fullard
MFC after: 3 days
Previously without -m parameter it worked mostly by concodence.
While there, make page/subpage values validation more strict.
MFC after: 5 days
Sponsored by: iXsystems, Inc.
This turns into a warning in GCC 4.2 that 'reverse' may be used
uninitialized in this function. While I don't immediately see where it's
deciding this from (there's only two paths that make column != NULL, and
they both set reverse), initializing reverse earlier is good for clarity.
MFC after: 3 days
- Remove incomplete and dangerous ata_res decoding from ata_do_cmd().
Instead switch all functions that need the result to use get_ata_status(),
doing the same, but more careful, also reducing code duplication.
- Made get_ata_status() to also decode fixed format sense. In many cases
it is still not enough to make it useful, since it can only report results
of 28-bit command, but it is slightly better then nothing.
- Organize error reporting in ata_do_cmd(), so that if caller specified
AP_FLAG_CHK_COND, it is responsible for command errors (non-ioctl ones).
- Make HPA/AMA errors not fatal for `identify` subcommand.
- Fix reprobe() not being called on HPA/AMA when in quiet mode.
- Remove not very useful messages from `format` and `sanitize` commands
with -y flag. Once they started, they often can't be stopped any way.
MFC after: 5 days
Sponsored by: iXsystems, Inc.
Error there mean that command was not even executed, and all information
we have about it is errno, and cam_error_print() call is not very useful.
Plus it is most likely a programmatic error, that shoud not happen.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
This is a rework of r344701, that noticed that number of bytes passes to
8 bit sector count field gets truncated. First decision was to not pass
anything, since ATA specs define the field as N/A. But it appeared to be a
problem for some SAT devices, that require information about data transfer
to operate properly. Some additional investigation shown that it is quite
a common practice to set unused fields of ATA commands (fortunately ATA
specs formally allow it) to supply the information to SAT layer. I have
found SAS-SATA interposer that does not allow pass-through without it.
As side effect, reduce code duplication by removing ata_do_28bit_cmd()
function, replacing it with more universal ata_do_cmd().
MFC after: 1 week
Sponsored by: iXsystems, Inc.
The default package use to be FreeBSD-runtime but it should only contain
binaries and libs enough to boot to single user and repair the system, it
is also very handy to have a package that can be tranform to a small mfsroot.
So create a new package named FreeBSD-utilities and make it the default one.
Also move a few binaries and lib into this package when it make sense.
Reviewed by: bapt, gjb
Differential Revision: https://reviews.freebsd.org/D21506
It doesn't need to be in runtime and might help people who want to
experiment with other rc system or don't use one (like in small
embedded mfsroot).
Reviewed by: bapt, gjb
Differential Revision: https://reviews.freebsd.org/D21499
The Host Buffer feature (NVMe 1.4 section 89) allows for the NVMe card
request the host provide it buffer for lookaside tables and maybe
other things. Report the card's minimum and preferred sizes with
nvmecontrol/camcontrol identify.
Allow 'bectl list' to sort output by a given property name. The property
name is passed in using a command-line flag, '-c' for ascending order and
'-C' for descending order. The properties allowed to sort by are:
- name (the default output, even if '-c' or '-C' are not used)
- creation
- origin
- used
- usedds
- usedsnap
- usedrefreserv
The default output for 'bectl list' is now ascending alphabetical order of
BE name.
To sort by creation time from earliest to latest, the command would be
'bectl list -c creation'
Submitted by: Rob Fairbanks <rob.fx907 gmail com>
Reviewed by: ler
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D20818
KTLS adds support for in-kernel framing and encryption of Transport
Layer Security (1.0-1.2) data on TCP sockets. KTLS only supports
offload of TLS for transmitted data. Key negotation must still be
performed in userland. Once completed, transmit session keys for a
connection are provided to the kernel via a new TCP_TXTLS_ENABLE
socket option. All subsequent data transmitted on the socket is
placed into TLS frames and encrypted using the supplied keys.
Any data written to a KTLS-enabled socket via write(2), aio_write(2),
or sendfile(2) is assumed to be application data and is encoded in TLS
frames with an application data type. Individual records can be sent
with a custom type (e.g. handshake messages) via sendmsg(2) with a new
control message (TLS_SET_RECORD_TYPE) specifying the record type.
At present, rekeying is not supported though the in-kernel framework
should support rekeying.
KTLS makes use of the recently added unmapped mbufs to store TLS
frames in the socket buffer. Each TLS frame is described by a single
ext_pgs mbuf. The ext_pgs structure contains the header of the TLS
record (and trailer for encrypted records) as well as references to
the associated TLS session.
KTLS supports two primary methods of encrypting TLS frames: software
TLS and ifnet TLS.
Software TLS marks mbufs holding socket data as not ready via
M_NOTREADY similar to sendfile(2) when TLS framing information is
added to an unmapped mbuf in ktls_frame(). ktls_enqueue() is then
called to schedule TLS frames for encryption. In the case of
sendfile_iodone() calls ktls_enqueue() instead of pru_ready() leaving
the mbufs marked M_NOTREADY until encryption is completed. For other
writes (vn_sendfile when pages are available, write(2), etc.), the
PRUS_NOTREADY is set when invoking pru_send() along with invoking
ktls_enqueue().
A pool of worker threads (the "KTLS" kernel process) encrypts TLS
frames queued via ktls_enqueue(). Each TLS frame is temporarily
mapped using the direct map and passed to a software encryption
backend to perform the actual encryption.
(Note: The use of PHYS_TO_DMAP could be replaced with sf_bufs if
someone wished to make this work on architectures without a direct
map.)
KTLS supports pluggable software encryption backends. Internally,
Netflix uses proprietary pure-software backends. This commit includes
a simple backend in a new ktls_ocf.ko module that uses the kernel's
OpenCrypto framework to provide AES-GCM encryption of TLS frames. As
a result, software TLS is now a bit of a misnomer as it can make use
of hardware crypto accelerators.
Once software encryption has finished, the TLS frame mbufs are marked
ready via pru_ready(). At this point, the encrypted data appears as
regular payload to the TCP stack stored in unmapped mbufs.
ifnet TLS permits a NIC to offload the TLS encryption and TCP
segmentation. In this mode, a new send tag type (IF_SND_TAG_TYPE_TLS)
is allocated on the interface a socket is routed over and associated
with a TLS session. TLS records for a TLS session using ifnet TLS are
not marked M_NOTREADY but are passed down the stack unencrypted. The
ip_output_send() and ip6_output_send() helper functions that apply
send tags to outbound IP packets verify that the send tag of the TLS
record matches the outbound interface. If so, the packet is tagged
with the TLS send tag and sent to the interface. The NIC device
driver must recognize packets with the TLS send tag and schedule them
for TLS encryption and TCP segmentation. If the the outbound
interface does not match the interface in the TLS send tag, the packet
is dropped. In addition, a task is scheduled to refresh the TLS send
tag for the TLS session. If a new TLS send tag cannot be allocated,
the connection is dropped. If a new TLS send tag is allocated,
however, subsequent packets will be tagged with the correct TLS send
tag. (This latter case has been tested by configuring both ports of a
Chelsio T6 in a lagg and failing over from one port to another. As
the connections migrated to the new port, new TLS send tags were
allocated for the new port and connections resumed without being
dropped.)
ifnet TLS can be enabled and disabled on supported network interfaces
via new '[-]txtls[46]' options to ifconfig(8). ifnet TLS is supported
across both vlan devices and lagg interfaces using failover, lacp with
flowid enabled, or lacp with flowid enabled.
Applications may request the current KTLS mode of a connection via a
new TCP_TXTLS_MODE socket option. They can also use this socket
option to toggle between software and ifnet TLS modes.
In addition, a testing tool is available in tools/tools/switch_tls.
This is modeled on tcpdrop and uses similar syntax. However, instead
of dropping connections, -s is used to force KTLS connections to
switch to software TLS and -i is used to switch to ifnet TLS.
Various sysctls and counters are available under the kern.ipc.tls
sysctl node. The kern.ipc.tls.enable node must be set to true to
enable KTLS (it is off by default). The use of unmapped mbufs must
also be enabled via kern.ipc.mb_use_ext_pgs to enable KTLS.
KTLS is enabled via the KERN_TLS kernel option.
This patch is the culmination of years of work by several folks
including Scott Long and Randall Stewart for the original design and
implementation; Drew Gallatin for several optimizations including the
use of ext_pgs mbufs, the M_NOTREADY mechanism for TLS records
awaiting software encryption, and pluggable software crypto backends;
and John Baldwin for modifications to support hardware TLS offload.
Reviewed by: gallatin, hselasky, rrs
Obtained from: Netflix
Sponsored by: Netflix, Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D21277
The following checks are now being enforced:
- bpbBytesPerSec: only accept 512, 1024, 2048 and 4096.
- bpbSecPerClust: only accept 1, 2, 4, 8, 16, 32, 64 and 128.
- bpbResSectors: require non-zero.
- bpbFATs: require non-zero.
- bpbSectors: require zero for FAT32.
- bpbFATsmall: require zero for FAT32.
- bpbHugeSectors: require non-zero for FAT32.
Bail out if the BPB contained values that do not meet these requirements.
We also require FATsecs * FATsecs to not overflow 32-bit unsigned
integer.
Check for backup boot block was removed because the checker does not take
corrective action, and msdosfs driver ignores it too.
Use CMSG_FIRSTHDR rather than assume that an array is correctly aligned.
Fixes warnings on sparc64 and powerpcspe.
Submitted by: Ján Sučan <sucanjan@gmail.com>
MFH: 2 weeks
Sponsored by: Google LLC (Google Summer of Code 2019)
Differential Revision: https://reviews.freebsd.org/D21406
This fixes -Wcast-align errors when compiled with WARNS=6.
Submitted by: Ján Sučan <sucanjan@gmail.com>
MFC after: 2 weeks
Sponsored by: Google LLC (Google Summer of Code 2019)
Differential Revision: https://reviews.freebsd.org/D21327
Now equivalent options have the same flags, and nonequivalent options have
different flags. This is a prelude to merging the two commands.
Submitted by: Ján Sučan <sucanjan@gmail.com>
MFC: Never
Sponsored by: Google LLC (Google Summer of Code 2019)
Differential Revision: https://reviews.freebsd.org/D21345
ping's default is now not to attempt reverse DNS lookups. The -H flag will
enable them. This change is not quite a reversion of r351330. That change
made the happy path and error path do reverse lookups consistently; this
change changes the default for both paths.
Submitted by: Ján Sučan <sucanjan@gmail.com>
Discussed with: cem
MFC after: 2 weeks
MFC-With: 351330
Sponsored by: Google LLC (Google Summer of Code 2019)
Differential Revision: https://reviews.freebsd.org/D21364
FSI_Nxt_Free instead of providing a wrong value.
With this change, fsck_msdosfs would no longer complain about invalid
FSInfo information.
MFC after: 2 weeks
This is the reverse of the -n flag.
Submitted by: Ján Sučan <sucanjan@gmail.com>
Sponsored by: Google LLC (Google Summer of Code 2019)
Differential Revision: https://reviews.freebsd.org/D21356
When printing replies, ping will now attempt a reverse DNS lookup of the
target. That can be suppressed by using the "-n" option. Curiously, ping
has always done reverse lookups in certain error paths, but never in the
success path.
Submitted by: Ján Sučan <sucanjan@gmail.com>
MFC after: 2 weeks
Sponsored by: Google LLC (Google Summer of Code 2019)
Differential Revision: https://reviews.freebsd.org/D21351
Increase buffer size for the string representation of n_time
ICMP timestamp is a 32-bit number. In pr_ntime(), number of minutes
and seconds is always 2 characters wide. Max. number of hours is 4
characters wide. The buffer size should be at least:
4 + 2 + 2 + 1 (':') + 1 (':') + 1 ('\0') = 11
Submitted by: Ján Sučan <sucanjan@gmail.com>
MFC after: 2 weeks
Sponsored by: Google, inc. (Google Summer of Code 2019)
Differential Revision: https://reviews.freebsd.org/D21325
Some socket options require root privileges to set. The old code did indeed
drop privileges at the earliest opportunity.
Submitted by: Ján Sučan <sucanjan@gmail.com>
MFC after: Never
Sponsored by: Google, Inc. (Google Summer of Code 2019)
Differential Revision: https://reviews.freebsd.org/D21319
This is a preparation step for adding ATF tests of in_cksum(), which has been
modified to operate on unaligned data. ping.o cannot be linked to the test
executable because both of them contain 'main' symbol.
Submitted by: Ján Sučan <sucanjan@gmail.com>
MFC after: 2 weeks
Sponsored by: Google, inc. (Google Summer of Code 2019)
Differential Revision: https://reviews.freebsd.org/D21288
Revision 350859 removed level of indirection that was needed for setting the
caller's `cp' pointer. dnsdecode() uses return value to indicate error or
success. It returns pointer to a buffer holding a decompressed DNS name or
NULL. The caller uses that value only to find out the result, not for accessing
the buffer.
We use the return value to propagate the new value of `cp' pointer to
the caller instead of using an output argument.
Submitted by: Ján Sučan <sucanjan@gmail.com>
MFC after: 2 weeks
MFC-With: 350859
Sponsored by: Google, Inc (Google Summer of Code 2019)
Differential Revision: https://reviews.freebsd.org/D21266
This fixes -Wcast-align errors when compiled with WARNS=6.
Submitted by: Ján Sučan <sucanjan@gmail.com>
MFC after: 2 weeks
Sponsored by: Google, inc. (Google Summer of Code 2019)
Differential Revision: https://reviews.freebsd.org/D21217
The old code worked, but wasted some stack space.
Submitted by: Ján Sučan <sucanjan@gmail.com>
MFC after: 2 weeks
Sponsored by: Google, inc. (Google Summer of Code 2019)
Differential Revision: https://reviews.freebsd.org/D21275
GCC isn't smart enough to realize that this variable was always initialized.
Submitted by: Ján Sučan <sucanjan@gmail.com>
MFC after: 2 weeks
Sponsored by: Google, inc. (Google Summer of Code 2019)
Differential Revision: https://reviews.freebsd.org/D21271
GCC 4.2 isn't smart enough to know that this variable is already defined by
the time it's used.
Submitted by: Ján Sučan <sucanjan@gmail.com>
MFC after: 2 weeks
Sponsored by: Google, inc. (Google Summer of Code 2019)
Differential Revision: https://reviews.freebsd.org/D21269
expression howmany(BBSIZE, PAGE_SIZE), where BBSIZE is the size of the
boot block area. That can be less than 2 if PAGE_SIZE is big.
swapon(8) has an option to trim (delete) all the blocks of a device at
startup. However, if the first of those blocks is a bsd label, then
trimming those blocks is destructive. Change swapon to leave the
first BBSIZE bytes untrimmed.
Update manual pages to reflect changes in how swapon and how it may be
used, espeically in association with savecore.
Reviewed by: alc
Approved by: markj (mentor)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D21191
This fixes -Wcast-align errors for in_cksum() calls when compiled with
WARNS=6.
Submitted by: Ján Sučan <sucanjan@gmail.com>
MFC after: 2 weeks
Sponsored by: Google, inc. (Google Summer of Code 2019)
Differential Revision: https://reviews.freebsd.org/D21261
That revision changed the internal clock to the monotonic, but neglected to
change the datagram's timestamp source.
Reported by: Oliver Hartmann, Michael Butler
Reviewed by: Ján Sučan <sucanjan@gmail.com>, allanjude
MFC after: 2 weeks
MFC-With: r350998
Differential Revision: https://reviews.freebsd.org/D21258
Follow-up on r322318 and r322319 and remove the deprecated modules.
Shift some now-unused kernel files into userspace utilities that incorporate
them. Remove references to removed GEOM classes in userspace utilities.
Reviewed by: imp (earlier version)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D21249
Though ntohs and htons are functionally identical, they have different meanings.Using the correct one helps to document the code.
Submitted by: Ján Sučan <sucanjan@gmail.com>
MFC after: 2 weeks
Sponsored by: Google, inc. (Google Summer of Code 2019)
Differential Revision: https://reviews.freebsd.org/D21219
The `sp' pointer doesn't need to be modified in the caller of
dnsdecode().
This fixes -Wcast-qual error (`must have all intermediate pointers
const qualified to be safe') when compiled with WARNS=6.
Submitted by: Ján Sučan <sucanjan@gmail.com>
MFC after: 2 weeks
Sponsored by: Google, inc. (Google Summer of Code 2019)
Differential Revision: https://reviews.freebsd.org/D21215
This fixes -Wmissing-variable-declarations error when compiled with
WARNS=6.
Submitted by: Ján Sučan <sucanjan@gmail.com>
MFC after: 2 weeks
Sponsored by: Google, inc. (Google Summer of Code 2019)
Differential Revision: https://reviews.freebsd.org/D21214
It can be done just after the sockets have been created.
Submitted by: Ján Sučan <sucanjan@gmail.com>
MFC after: 2 weeks
Sponsored by: Google, inc. (Google Summer of Code 2019)
Differential Revision: https://reviews.freebsd.org/D21213
Make a note in the newfs.8 manual page to update the first backup
superblock location when changing the default fragment size for
the filesystem.
Reported by: O. Hartmann
It allows to read and write block descriptors alike to mode page parameters.
It allows to change block size or short-stroke HDDs or overprovision SSDs.
Depenting on -P parameter the change can be either persistent or till reset.
In case of block size change device may need reformat after the setting.
In case of SSD overprovisioning format or sanitize may be needed to really
free the flash.
During implementation appeared that csio_encode_visit() can not handle
integers of more then 4 bytes, that makes 8-byte LBA handling awkward.
I had to split it into two 4-byte halves now.
MFC after: 1 week
Relnotes: yes
Sponsored by: iXsystems, Inc.
This commit imports the new fusefs driver. It raises the protocol level
from 7.8 to 7.23, fixes many bugs, adds a test suite for the driver, and
adds many new features. New features include:
* Optional kernel-side permissions checks (-o default_permissions)
* Implement VOP_MKNOD, VOP_BMAP, and VOP_ADVLOCK
* Allow interrupting FUSE operations
* Support named pipes and unix-domain sockets in fusefs file systems
* Forward UTIME_NOW during utimensat(2) to the daemon
* kqueue support for /dev/fuse
* Allow updating mounts with "mount -u"
* Allow exporting fusefs file systems over NFS
* Server-initiated invalidation of the name cache or data cache
* Respect RLIMIT_FSIZE
* Try to support servers as old as protocol 7.4
Performance enhancements include:
* Implement FUSE's FOPEN_KEEP_CACHE and FUSE_ASYNC_READ flags
* Cache file attributes
* Cache lookup entries, both positive and negative
* Server-selectable cache modes: writethrough, writeback, or uncached
* Write clustering
* Readahead
* Use counter(9) for statistical reporting
PR: 199934 216391 233783 234581 235773 235774 235775
PR: 236226 236231 236236 236291 236329 236381 236405
PR: 236327 236466 236472 236473 236474 236530 236557
PR: 236560 236844 237052 237181 237588 238565
Reviewed by: bcr (man pages)
Reviewed by: cem, ngie, rpokala, glebius, kib, bde, emaste (post-commit
review on project branch)
MFC after: 3 weeks
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Pull Request: https://reviews.freebsd.org/D21110
I merged passthru.c from the wrong branch (it was a branch that went further in
a direction I wound up not taking). Fix the mismerge and turn passthru on.
NVMe reservations are quite alike to SCSI persistent reservations and
can be used in clustered setups with shared multiport storage.
MFC after: 10 days
Relnotes: yes
Sponsored by: iXsystems, Inc.
r348215 changed jail_getid(3) to validate passed-in jids as active jails
(as the function is documented to return -1 if the jail does not exist).
This broke the jail option (in some cases?) as the jail historically hasn't
needed to exist at the time of rule parsing; jids will get stored and later
applied.
Fix this caller to attempt to parse *av as a number first and just use it
as-is to match historical behavior. jail_getid(3) must still be used in
order for name arguments to work, but it's strictly a fallback in case we
weren't given a number.
Reported and tested by: Ari Suutari <ari stonepile fi>
Reviewed by: ae
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D21128
It allows to delete all user data from NVM subsystem in one of 3 methods.
It is a close equivalent of SCSI SANITIZE command of `camcontrol sanitize`,
so I tried to keep arguments as close as possible.
While there, fix supported sanitize methods reporting in `identify`.
MFC after: 2 weeks
Relnotes: yes
Sponsored by: iXsystems, Inc.
Add capsicum support to ping6, mostly copying the strategy used for ping.
Submitted by: Ján Sučan <jansucan@gmail.com>
Reviewed by: markj
MFC after: 2 weeks
Sponsored by: Google, inc. (Google Summer of Code 2019)
Differential Revision: https://reviews.freebsd.org/D21050
In particular: Changed Namespace List, Commands Supported and Effects,
Reservation Notification, Sanitize Status.
Add few new arguments to `nvmecontrol log` subcommand.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
While very useful by itself, it also makes `nvmecontrol` not depend on
hardcoded device names parsing, that in its turn makes simple to take
nvdX (and potentially any other) device names as arguments.
Also added IOCTL bypass from nvdX to respective nvmeYnsZ makes them
interchangeable for management purposes.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
This adds several previously missed but important subcommands to list
namespaces and controllers. It also fixes few previously added but
just found with real testing to be broken subcommands.
Also while there, add possibility to explicitly specify nsid for
`nvmecontrol identify` subcommand. It may be useful to specify nsids
not having own devices, for example 0xffffffff, or just newly created
ones.
MFC after: 2 weeks
Relnotes: yes
Sponsored by: iXsystems, Inc.
While old devices may not support 10 byte MODE SENSE/MODE SELECT commands,
new ones may not be able to report all mode pages with 6 byte commands.
This patch makes camcontrol by default start with 10 byte commands and
fall back to 6 byte on ILLEGAL REQUEST error, or 6 byte can be forced.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
ATA sanitize is functionally identical to SCSI, just uses different
initiation commands and status reporting mechanism.
While there, make kernel better handle sanitize commands and statuses.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.