While <sys/sysctl.h> includes <sys/queue.h> unconditionally, it is only
actually used in code which is conditional on _KERNEL. Make the #include
itself conditional as well, and fix userland code that uses <sys/queue.h>
for other purposes but relied on <sys/sysctl.h> to bring it in.
MFC after: 1 week
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using mis-identified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
This API allows callers to enumerate all known pages, including any
direct map & kernel map virtual addresses, physical addresses, size,
offset into the core, & protection configured.
For architectures that support direct map addresses, also generate pages
for any direct map only addresses that are not associated with kernel
map addresses.
Fix page size portability issue left behind from previous kvm page table
lookup interface.
Reviewed by: jhb
Sponsored by: Backtrace I/O
Differential Revision: https://reviews.freebsd.org/D12279
systems that lack the libcall, based on __FreeBSD_version.
kvm_open2(3) wasn't made available until r291406, which is in ^/stable/11,
but not ^/stable/10. This makes some of kvm_geterr_test available for testing
on ^/stable/10.
MFC after: now
Sponsored by: Dell EMC Isilon
Extend the ino_t, dev_t, nlink_t types to 64-bit ints. Modify
struct dirent layout to add d_off, increase the size of d_fileno
to 64-bits, increase the size of d_namlen to 16-bits, and change
the required alignment. Increase struct statfs f_mntfromname[] and
f_mntonname[] array length MNAMELEN to 1024.
ABI breakage is mitigated by providing compatibility using versioned
symbols, ingenious use of the existing padding in structures, and
by employing other tricks. Unfortunately, not everything can be
fixed, especially outside the base system. For instance, third-party
APIs which pass struct stat around are broken in backward and
forward incompatible ways.
Kinfo sysctl MIBs ABI is changed in backward-compatible way, but
there is no general mechanism to handle other sysctl MIBS which
return structures where the layout has changed. It was considered
that the breakage is either in the management interfaces, where we
usually allow ABI slip, or is not important.
Struct xvnode changed layout, no compat shims are provided.
For struct xtty, dev_t tty device member was reduced to uint32_t.
It was decided that keeping ABI compat in this case is more useful
than reporting 64-bit dev_t, for the sake of pstat.
Update note: strictly follow the instructions in UPDATING. Build
and install the new kernel with COMPAT_FREEBSD11 option enabled,
then reboot, and only then install new world.
Credits: The 64-bit inode project, also known as ino64, started life
many years ago as a project by Gleb Kurtsou (gleb). Kirk McKusick
(mckusick) then picked up and updated the patch, and acted as a
flag-waver. Feedback, suggestions, and discussions were carried
by Ed Maste (emaste), John Baldwin (jhb), Jilles Tjoelker (jilles),
and Rick Macklem (rmacklem). Kris Moore (kris) performed an initial
ports investigation followed by an exp-run by Antoine Brodin (antoine).
Essential and all-embracing testing was done by Peter Holm (pho).
The heavy lifting of coordinating all these efforts and bringing the
project to completion were done by Konstantin Belousov (kib).
Sponsored by: The FreeBSD Foundation (emaste, kib)
Differential revision: https://reviews.freebsd.org/D10439
- kvm_close: add a testcase to verify support for errno = EINVAL / -1
(see D10065) when kd == NULL is provided to the libcall.
- kvm_geterr:
-- Add a negative testcase for kd == NULL returning "" (see D10022).
-- Add two positive testcases:
--- test the error case using kvm_write on a O_RDONLY descriptor.
--- test the "no error" case using kvm_read(3) and kvm_nlist(3) as
helper routines and by injecting a bogus error message via
_kvm_err (an internal API) _kvm_err was used as there isn't a
formalized way to clear the error output, and because
kvm_nlist always returns ENOENT with the NULL terminator today.
- kvm_open, kvm_open2:
-- Add some basic negative tests for kvm_open(3) and kvm_open2(3).
Testing positive cases with a specific
`corefile`/`execfile`/`resolver` requires more work and would require
user intervention today in order to reliably test this out.
Reviewed by: markj
MFC after: 2 months
Sponsored by: Dell EMC Isilon
Differential Revision: D10024
- Fix -Wunused warnings with *_native detection handlers by marking `kd`
__unused, except with arm/mips, where a slightly more complicated scheme
is required to handle the native case vs the non-native case.
- Fix -Wmissing-variable-declarations warnings by marking struct kvm_arch
objects static.
Differential Revision: D10071
MFC after: 1 week
Reviewed by: vangyzen
Tested with: WIP test code (D10024) // kgdb7121 (i386 crash/kernel on amd64)
Sponsored by: Dell EMC Isilon
Return a NUL string instead of just working by accident with kvm_geterr(3)
when MALLOC_PRODUCTION is disabled (I didn't confirm the MALLOC_PRODUCTION
being enabled path).
Document the new explicit return behavior for kvm_geterr(3), as well
as the previous implicit behavior, i.e., the buffer attached to
returned via kvm_geterr(3) would be empty if a previous error hadn't been
stored in `kd`.
Differential Revision: D10022
MFC after: 1 week
Reviewed by: vangyzen
Sponsored by: Dell EMC Isilon
Don't segfault in kvm_close(3) if provided a NULL pointer. Instead, return
-1 and set errno to EINVAL.
Document this new behavior explicitly.
MFC after: 1 week
Reviewed by: vangyzen
Sponsored by: Dell EMC Isilon
Differential Revision: D10065
`error` is the accumulated error from previous close(2) calls.
This bug has been present since the libcall's import from 4.4BSD
Lite (r1573).
MFC after: 1 week
Noticed by: vangyzen (D10022)
Relnotes: yes
Sponsored by: Dell EMC Isilon
As noted by vangyzen, with a similar issue in D10022, the pointer portion of
the .Fa macro call is unnecessary, so remove the '*'.
MFC after: 1 week
Sponsored by: Dell EMC Isilon
The commented out return value for kvm_getprocs(3) was misleading -- the
uncommented line is correct.
No content change
MFC after: 1 week
Sponsored by: Dell EMC Isilon
I noticed after commit that kvm_dpcpu_setcpu was defined in the manpage.
Thus, the correct macro for the function reference is .Fn, not .Xr.
MFC after: 1 week
X-MFC with: r315363
Sponsored by: Dell EMC Isilon
This is being done for the following reasons:
- kvm_open(3), etc says they will return NULL.
- NULL by definition is (void*)0 per POSIX, but can be redefined,
depending on the compiler, etc.
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
Change ksw_used and ksw_total to unsigned, which increases the maximum
total swap that can be displayed properly from ~8TB to ~16TB.
Obtained from: DragonflyBSD (ecc2e461)
MFC after: 2 weeks
This change consists of two parts:
- allow libkvm to recognize /dev/vmm/* character devices as devices that
provide access to the physical memory of a system (similarly to /dev/fwmem*)
- allow libkvm to recognize that /dev/vmm/* and /dev/fwmem* devices provide
access to the physical memory of live remote systems and, thus, the memory
is writable
As a result, it should be possible to run commands like
$ kgdb -w /path/to/kernel /dev/fwmem0.0
$ kgdb /path/to/kernel /dev/vmm/guest
Reviewed by: kib, jhb
MFC after: 2 weeks
Relnotes: yes
Sponsored by: Panzura
Differential Revision: https://reviews.freebsd.org/D8679
kinfo_proc::ki_tdname is three characters shorter than
thread::td_name. Add a ki_moretdname field for these three
extra characters. Add the new field to kinfo_proc32, as well.
Update all in-tree consumers to read the new field and assemble
the full name, except for lldb's HostThreadFreeBSD.cpp, which
I will handle separately. Bump __FreeBSD_version.
Reviewed by: kib
MFC after: 1 week
Relnotes: yes
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D8722
Instead of using a hash table to convert physical page addresses to offsets
in the sparse page array, cache the number of bits set for each 4MB chunk of
physical pages. Upon lookup, find the nearest cached population count, then
add/subtract the number of bits from that point to the page's PTE bit.
Then multiply by page size and add to the sparse page map's base offset.
This replaces O(n) worst-case lookup with O(1) (plus a small number of bits
to scan in the bitmap). Also, for a 128GB system, a typical kernel core of
about 8GB will now only require ~4.5MB of RAM for this approach instead of
~48MB as with the hash table.
More concretely, /usr/sbin/crashinfo against the same core improves from a
max RSS of 188MB and wall time of 43.72s (33.25 user 2.94 sys) to 135MB and
9.43s (2.58 user 1.47 sys). Running "thread apply all bt" in kgdb has a
similar RSS improvement, and wall time drops from 4.44s to 1.93s.
Reviewed by: jhb
Sponsored by: Backtrace I/O
This libcall has been broken since (at least) r174989/8.0-RELEASE.
Bump SHLIB_MAJOR for the change
Differential Revision: https://reviews.freebsd.org/D6052
Relnotes: yes
Reviewed by: jhb, markj
Sponsored by: EMC / Isilon Storage Division
- Don't leak nbufp on realloc failure in kvm_argv
- Catch malloc errors with bufp
- Set buflen last in the "buflen == 0" case to ensure that
bufp/nbufp is properly reallocated on the next go around
Differential Revision: https://reviews.freebsd.org/D6051
MFC after: 1 week
Reviewed by: jhb, markj
Reported by: cppcheck
Sponsored by: EMC / Isilon Storage Division
In particular,
- avoid dereferencing NULL pointers
- test pointers against NULL, not 0
- test for errout == NULL in the top-level functions (kvm_open, kvm_openfiles,
kvm_open2, etc)
- Replace a realloc and free on failure with reallocf
Found with: devel/cocchinelle
Differential Revision: https://reviews.freebsd.org/D5954
MFC after: 1 week
Reviewed by: jhb
Sponsored by: EMC / Isilon Storage Division
Use 'pdpe' to extract the PA of the 1GB page instead of 'pde' (which was
a copy and paste bug from the 2MB page case further down).
CID: 1341467
Reported by: pfg
or pte-v6.h in files which needs it.
There are quite internal definitions in pte-v4.h and pte-v6.h headers
specific for corresponding pmap implementation. These headers should be
included only in very few files and an intention is to not hide for
which implementation such files are.
Further, sys/arm/arm/elf_trampoline.c is an example of file which
uses armv4 like pmap implementation for both armv4 and armv6 platforms.
This is another reason why pte.h which includes specific header
according to __ARM_ARCH is not created.
- Add a kvaddr_type to represent kernel virtual addresses instead of
unsigned long.
- Add a struct kvm_nlist which is a stripped down version of struct nlist
that uses kvaddr_t for n_value.
- Add a kvm_native() routine that returns true if an open kvm descriptor
is for a native kernel and memory image.
- Add a kvm_open2() function similar to kvm_openfiles(). It drops the
unused 'swapfile' argument and adds a new function pointer argument for
a symbol resolving function. Native kernels still use _fdnlist() from
libc to resolve symbols if a resolver function is not supplied, but cross
kernels require a resolver.
- Add a kvm_nlist2() function similar to kvm_nlist() except that it uses
struct kvm_nlist instead of struct nlist.
- Add a kvm_read2() function similar to kvm_read() except that it uses
kvaddr_t instead of unsigned long for the kernel virtual address.
- Add a new kvm_arch switch of routines needed by a vmcore backend.
Each backend is responsible for implementing kvm_read2() for a given
vmcore format.
- Use libelf to read headers from ELF kernels and cores (except for
powerpc cores).
- Add internal helper routines for the common page offset hash table used
by the minidump backends.
- Port all of the existing kvm backends to implement a kvm_arch switch and
to be cross-friendly by using private constants instead of ones that
vary by platform (e.g. PAGE_SIZE). Static assertions are present when
a given backend is compiled natively to ensure the private constants
match the real ones.
- Enable all of the existing vmcore backends on all platforms. This means
that libkvm on any platform should be able to perform KVA translation
and read data from a vmcore of any platform.
Tested on: amd64, i386, sparc64 (marius)
Differential Revision: https://reviews.freebsd.org/D3341
