Some mpc85xx devices with u-boot need MBR partitioning with a FAT boot
partition. Since the infrastructure is already in place to have a dedicated
boot partition, this adds the necessary bits to use that infrastructure with
mpc85xx boards.
Reviewed By: nwhitehorn
Differential Revision: https://reviews.freebsd.org/D15664
GNU grep as in actually in base does not have any translations support
compiled in, so no functionnality loss.
We do support 193 locales in base, we will never catch up on that number of
translation with bsd grep.
Removing NLS support make bsd grep consistent with the other binaries in base
which are not translated, and also reduce a little bit the code.
Reviewed by: kevans
Approved by: kevans
Discussed with: kevans @BSDCan
Differential Revision: https://reviews.freebsd.org/D15682
In the DESCRIPTION, put the more commonly used functions first in the
corresponding sentence, to help catch the eye.
Pull out the note about overlapping buffers to its own paragraph, as it
applies to all routines documented by this page.
Emphasize the potentially surprising strncpy(3) behavior of zero-filling the
remainder of a buffer larger than the source string.
Encourage strlcpy use; remove portability note about strlcpy(3). Adapting a
strlcpy-using code base to a platform that does not provide strlcpy in libc
is so trivial as to not be worth mentioning. (Just copy strlcpy.c out of
any BSD libc, or include and link the pre-packaged libbsd library on non-BSD
platforms.)
Likewise, expand the page's warning about ease of potential misuse to cover
all functions documented herein, and explicitly suggest using strlcpy most
of the time. The text was mostly cribbed from a similar suggestion in
gets(3).
Finally, document the remaining valid use of strncpy -- the rare
fixed-length record with no expectation of nul-termination.
Sponsored by: Dell EMC Isilon
In the pf rc.d script the output of `/etc/rc.d/pf status` or `/etc/rc.d/pf
onestatus` always provided an exit status of zero. This made it fiddly to
programmatically determine if pf was running or not.
Return a non-zero status if the pf module is not loaded, extend pfctl to have
an option to return an error status if pf is not enabled.
PR: 228632
Submitted by: James Park-Watt <jimmypw AT gmail.com>
MFC after: 1 week
Silently dicard SCTP chunks which have been requested to be
authenticated but are received unauthenticated no matter if support
for SCTP authentication has been negotiated. This improves compliance
with RFC 4895.
When the application uses the SCTP_AUTH_CHUNK socket option to
request a chunk to be received in an authenticated way, enable
the SCTP authentication extension for the end-point. This improves
compliance with RFC 6458.
Discussed with: Peter Lei
MFC after: 3 days
This will not be executed on reload, though later work could allow for that.
It's intended/expected that later work won't generally need to happen on
every config load, just once (for, e.g., menu initialization) or just when
config is reloaded but not upon the initial load.
While at it rename hlist_add_after() into hlist_add_behind().
Submitted by: Johannes Lundberg <johalun0@gmail.com>
MFC after: 1 week
Sponsored by: Mellanox Technologies
Sponsored by: Limelight Networks
This patch adds a new socket option, SO_REUSEPORT_LB, which allow multiple
programs or threads to bind to the same port and incoming connections will be
load balanced using a hash function.
Most of the code was copied from a similar patch for DragonflyBSD.
However, in DragonflyBSD, load balancing is a global on/off setting and can not
be set per socket. This patch allows for simultaneous use of both the current
SO_REUSEPORT and the new SO_REUSEPORT_LB options on the same system.
Required changes to structures:
Globally change so_options from 16 to 32 bit value to allow for more options.
Add hashtable in pcbinfo to hold all SO_REUSEPORT_LB sockets.
Limitations:
As DragonflyBSD, a load balance group is limited to 256 pcbs (256 programs or
threads sharing the same socket).
This is a substantially different contribution as compared to its original
incarnation at svn r332894 and reverted at svn r332967. Thanks to rwatson@
for the substantive feedback that is included in this commit.
Submitted by: Johannes Lundberg <johalun0@gmail.com>
Obtained from: DragonflyBSD
Relnotes: Yes
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D11003
the LinuxKPI. Add a comment saying in which Linux version this change was made.
Submitted by: Johannes Lundberg <johalun0@gmail.com>
MFC after: 1 week
Sponsored by: Mellanox Technologies
Sponsored by: Limelight Networks
Use m_copyback() function to write checksum when it isn't located
in the first mbuf of the chain. Handmade analog doesn't handle the
case when parts of checksum are located in different mbufs.
Also in case when mbuf is too short, m_copyback() will allocate new
mbuf in the chain instead of making out of bounds write.
Also wrap long line and remove now useless KASSERTs.
X-MFC after: r334705
This is needed to avoid a race between the VNASSERT() below, and another
thread updating the VI_FREE flag, on weakly-ordered architectures.
On a 72-thread POWER9, without this barrier a 'make -j72 buildworld' would
panic on the assert regularly.
It may be possible to use a weaker barrier, and I'll investigate that once
all stability issues are worked out on POWER9.
The length of the IP payload is normally equal to the UDP length, UDP Options
(draft-ietf-tsvwg-udp-options-02) suggests using the difference between IP
length and UDP length to create space for trailing data.
Correct checksum length calculation to use the UDP length rather than the IP
length when not offloading UDP checksums.
Approved by: jtl (mentor)
Differential Revision: https://reviews.freebsd.org/D15222
r330809 replaced duplication of devdesc struct fields with an embedded copy
of the devdesc struct, to avoid fragility. That means all the scattered
comments indicating that structs must match are no longer valid. Likewise
asserts that attempted to mitigate some of the old fragility.
Reviewed by: imp@
of needed interface when many gif interfaces are present.
Remove rmlock from gif_softc, use epoch(9) and CK_LIST instead.
Move more AF-related code into AF-related locations.
Use hash table to speedup lookup of needed softc. Interfaces
with GIF_IGNORE_SOURCE flag are stored in plain CK_LIST.
Sysctl net.link.gif.parallel_tunnels is removed. The removal was planed
16 years ago, and actually it could work only for outbound direction.
Each protocol, that can be handled by if_gif(4) interface is registered
by separate encap handler, this helps avoid invoking the handler
for unrelated protocols (GRE, PIM, etc.).
This change allows dramatically improve performance when many gif(4)
interfaces are used.
Sponsored by: Yandex LLC
Currently it has several disadvantages:
- it uses single mutex to protect internal structures. It is used by
data- and control- path, thus there are no parallelism at all.
- it uses single list to keep encap handlers for both INET and INET6
families.
- struct encaptab keeps unneeded information (src, dst, masks, protosw),
that isn't used by code in the source tree.
- matches are prioritized and when many tunneling interfaces are
registered, encapcheck handler of each interface is invoked for each
packet. The search takes O(n) for n interfaces. All this work is done
with exclusive lock held.
What this patch includes:
- the datapath is converted to be lockless using epoch(9) KPI.
- struct encaptab now linked using CK_LIST.
- all unused fields removed from struct encaptab. Several new fields
addedr: min_length is the minimum packet length, that encapsulation
handler expects to see; exact_match is maximum number of bits, that
can return an encapsulation handler, when it wants to consume a packet.
- IPv6 and IPv4 handlers are stored in separate lists;
- added new "encap_lookup_t" method, that will be used later. It is
targeted to speedup lookup of needed interface, when gif(4)/gre(4) have
many interfaces.
- the need to use protosw structure is eliminated. The only pr_input
method was used from this structure, so I don't see the need to keep
using it.
- encap_input_t method changed to avoid using mbuf tags to store softc
pointer. Now it is passed directly trough encap_input_t method.
encap_getarg() funtions is removed.
- all sockaddr structures and code that uses them removed. We don't have
any code in the tree that uses them. All consumers use encap_attach_func()
method, that relies on invoking of encapcheck() to determine the needed
handler.
- introduced struct encap_config, it contains parameters of encap handler
that is going to be registered by encap_attach() function.
- encap handlers are stored in lists ordered by exact_match value, thus
handlers that need more bits to match will be checked first, and if
encapcheck method returns exact_match value, the search will be stopped.
- all current consumers changed to use new KPI.
Reviewed by: mmacy
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D15617
Coverity complains about:
if (((flags) & M_WAITOK) || _malloc_item != NULL)
saying:
The expression
1 /* (2 | 0x100) & 2 */ || _malloc_item != NULL
is suspicious because it performs a Boolean operation
on a constant other than 0 or 1.
Although the code is correct, add "!= 0" to make it slightly
more legible and to silence hundreds(?) of Coverity warnings.
Reported by: Coverity
Discussed with: mjg
Sponsored by: Dell EMC
These syscalls are atypical, because each one corresponds to several
different audit events, and they each pass several different audit class
filters.
Submitted by: aniketp
MFC after: 2 weeks
Sponsored by: Google, Inc. (GSoC 2018)
Differential Revision: https://reviews.freebsd.org/D15657
This makes them compatible with the C standard signatures, avoiding
spurious mismatch errors in the places where the oddball requirements
of standalone code end up putting two declarations of the same function
in play.
in the LinuxKPI. While at it document when to use the "virtual_address" or
the "address" field in the "vm_fault" structure.
Submitted by: Johannes Lundberg <johalun0@gmail.com>
MFC after: 1 week
Sponsored by: Mellanox Technologies
Sponsored by: Limelight Networks
Utility hangs when OCS_IOCTL_CMD_MGMT_GET_ALL called in parallel on port 0 and port 1.
Fix: Using static structure for results is corrupting the second ioctl request. Removed static for results structure.
Approved by: ken
MFC after: 3 days
