Resulting fseek() offset must fit in long, required by POSIX (pointed by bde),
so add LONG_MAX and final tests for it.
rewind.c:
1) add missing __sinit() as in fseek() it pretends to be.
2) use clearerr_unlocked() since we already lock stream before _fseeko()
3) don't zero errno at the end, it explicitely required by POSIX as the
only one method to test rewind() error condition.
4) don't clearerr() if error happens in _fseeko()
"[EINVAL] ... The resulting file-position indicator would be set to a
negative value."
Moreover, in real life negative seek in stdio cause EOF indicator cleared
and not set again forever even if EOF returned.
2) Catch few possible off_t overflows.
Reviewed by: arch discussion
It was foiled because of dynamic copy relocations that caused compile-time
space to be reserved in .bss and at run time a blob of data was copied to
that space and everything used the .bss version.. The problem is that
the space is reserved at compile time, not runtime... So we *still* could
not change the size of FILE. Sigh. :-(
Replace it with something that does actually work and really does let us
make 'FILE' extendable. It also happens to be the same as Linux does in
glibc, but has the slight cost of a pointer. Note that this is the
same cost that 'fp = fopen(), fprintf(fp, ...); fclose(fp);' has.
Fortunately, actual references to stdin/out/err are not all that common
since we have implicit stdin/out/err-using versions of functions
(printf() vs. fprintf()).
Avoid using parenthesis enclosure macros (.Pq and .Po/.Pc) with plain text.
Not only this slows down the mdoc(7) processing significantly, but it also
has an undesired (in this case) effect of disabling hyphenation within the
entire enclosed block.
instead of #pragma weak to create weak definitions. This macro is
improperly named, though, since a weak definition is not the same
thing as a weak reference.
Suggested by: bde
lock definitions to it. flockfile state is now allocated
along with the rest of FILE. This eliminates the need for a
separate allocation of flockfile state as well as eliminating
the mutex/lock used to serialize its allocation.
This is about to be replaced anyway by initialization explicitly
instead of lazily, and reducing the complexity of it. As it is
now, this will work fine, however.
while with threaded software in -CURRENT acting very "weird". It has
seemed, for example, in Mozilla that threads attempting to do host
lookups have been locking up. That's exactly the case.
There was a race condition in the implementation of the initialization
of the mutex used to protect FILE operations, first of all: multiple
instances of FLOCKFILE() in libc could occur on the same FILE at
the same time and cause strange behavior by overwriting eachothers'
creation of the mutex and the rest of the file lock.
Secondly, it's not appropriate to test the "validity" of the file
descriptor referenced by the FILE; if the code is calling FLOCKFILE()
or FUNLOCKFILE(), it wants the FILE to be locked or unlocked, not
to be locked or unlocked on the condition that _file is >= 0. This
also could quite easily cause leaks by failing to perform the lock or
unlock operation when it actually is needed.
Mozilla now works again on -CURRENT when linked to libc_r.so.5 and
libc.so.5.
ABI change. There is some serious evilness here to work around some
gcc weaknesses. We need to know the sizeof(FILE) manually until __sF
goes away in the next major bump. We have the size for Alpha and i386,
missing is ia64, ppc and sparc* (and i386 with 64 bit longs).
At some point down the track we can change the stdin etc #defines to
stop hard coding the size of FILE into application binaries.
Lots of head scratching and ideas and testing by: green, imp
causing some versions of as to dump core. This survived make
buildworld/installworld and the building gettext port afterwards.
Submitted by: <nnd@mail.nsk.ru> "N.Dudorov"
Reviewed by: "Daniel M. Eischen" <eischen@vigrid.com>
o Back out the __std* stuff. Can't figure out how to do this right now,
so we'll save it for late.
o use _up as a pointer for extra fields that we need to access.
o back out the libc major version bump.
Submitted by: green
reviewed by: peter, imp, green, obrien (to varying degrees).
We'll fix the "how do we stop encoding sizeof(FILE) in binaries" part
later.
Change __dtoa to not free the string it allocated the previous time it was
called. The caller now frees the string after usage if appropiate.
PR: 15070
Reviewed by: deischen
bikeshed in -arch. It isn't quite over, but it has been well established
that this can be adjusted or refined. But we do seem to have consensis
on a major bump of some sort. After this, it should reasonably safe
to build world again.
This change is to get rid of __sF[] and use seperate __stdin/out/err
handles. This means we can pad on extra bits onto the end of FILE
at will without going through this all over again. __sF[] was evil
because it compiled the sizeof(FILE) into every stdio using program.
Asbestos suit on: check!
Peril sensitive sunglasses on: check!
*gulp!*
try a hopefully more robust stdin/stdout/stderr. This costs an indirect
pointer fetch, but saves us from changes in 'FILE'. The __stdin stuff
is there to not pollute application name space if the application does
not use <stdio.h> and also in case something depended on the current
behavior where stdin etc was a #define.
Reviewed by: eischen, dillon
Add a lock to FILE. flockfile and friends are now implemented
(for the most part) in libc. flockfile_debug is implemented in
libc_r; I suppose it's about time to kill it but will do it in
a future commit.
Fix a potential deadlock in _fwalk in a threaded environment.
A file flag (__SIGN) was added to stdio.h that, when set, tells
_fwalk to ignore it in its walk. This seemed to be needed in
refill.c because each file needs to be locked when flushing.
Add a stub for pthread_self in libc. This is needed by flockfile
which is allowed by POSIX to be recursive.
Make fgetpos() error return value (-1) match man page.
Remove recursive calls to locked functions (stdio); I think I've
got them all, but I may have missed a couple.
A few K&R -> ANSI conversions along with removal of a few instances
of "register".
$Id$ -> $FreeBSD$ in libc/stdio/rget.c
Not objected to: -arch, a few months ago
Change __dtoa to not free the string it allocated the previous time it was
called. The caller now frees the string after usage if appropiate.
PR: 15070
adding (weak definitions to) stubs for some of the pthread
functions. If the threads library is linked in, the real
pthread functions will pulled in.
Use the following convention for system calls wrapped by the
threads library:
__sys_foo - actual system call
_foo - weak definition to __sys_foo
foo - weak definition to __sys_foo
Change all libc uses of system calls wrapped by the threads
library from foo to _foo. In order to define the prototypes
for _foo(), we introduce namespace.h and un-namespace.h
(suggested by bde). All files that need to reference these
system calls, should include namespace.h before any standard
includes, then include un-namespace.h after the standard
includes and before any local includes. <db.h> is an exception
and shouldn't be included in between namespace.h and
un-namespace.h namespace.h will define foo to _foo, and
un-namespace.h will undefine foo.
Try to eliminate some of the recursive calls to MT-safe
functions in libc/stdio in preparation for adding a mutex
to FILE. We have recursive mutexes, but would like to avoid
using them if possible.
Remove uneeded includes of <errno.h> from a few files.
Add $FreeBSD$ to a few files in order to pass commitprep.
Approved by: -arch
- The stack was getting smashed by __grow_type_table()
- reallocf() was being called with the wrong pointer
- The maximum argument number was being incorrectly computed
PR: misc/23521
the encoding and using the character set [a-zA-Z0-9]. This gives a total
of 62^6 = 56800235584 possible temporary filenames for the usual default
invocation of 6 X's (compared to as few as 52 possibilities for the
previous algorithm where up to 5 characters were wasted by the PID).
Update some apparently bitrotten comments to reflect reality.
Audited by: eivind, freebsd-audit
Reviewed by: freebsd-current (a while ago)
Originally submitted by: Peter Jeremy <Peter.Jeremy@alcatel.com.au>
rmdir(2) on directories and unlink(2) otherwise. This modification,
and most of the man page update has been obtined from OpenBSD. This
was spotted by someone on a mailing lists a few months ago, but
I've lost their mail.
Reviewed by: sheldonh
just use _foo() <-- foo(). In the case of a libpthread that doesn't do
call conversion (such as linuxthreads and our upcoming libpthread), this
is adequate. In the case of libc_r, we still need three names, which are
now _thread_sys_foo() <-- _foo() <-- foo().
Convert all internal libc usage of: aio_suspend(), close(), fsync(), msync(),
nanosleep(), open(), fcntl(), read(), and write() to _foo() instead of foo().
Remove all internal libc usage of: creat(), pause(), sleep(), system(),
tcdrain(), wait(), and waitpid().
Make thread cancellation fully POSIX-compliant.
Suggested by: deischen
points. For library functions, the pattern is __sleep() <--
_libc_sleep() <-- sleep(). The arrows represent weak aliases. For
system calls, the pattern is _read() <-- _libc_read() <-- read().
is good for... :-)), I discovered that part of the change when mkstemps()
was brought in was missed - it was missing the termination case to make
sure it doesn't walk into the suffix. This isn't the same code OpenBSD
has, I think this is a little better as we terminate the loop in a better
spot.
misinterpreted to mean that the pointer passed to asprintf() must be suitable
for passing to realloc() as-is (ie. either a NULL pointer or a valid pointer).
track.
The $Id$ line is normally at the bottom of the main comment block in the
man page, separated from the rest of the manpage by an empty comment,
like so;
.\" $Id$
.\"
If the immediately preceding comment is a @(#) format ID marker than the
the $Id$ will line up underneath it with no intervening blank lines.
Otherwise, an additional blank line is inserted.
Approved by: bde
compiling, since <stdio.h> correctly doesn't declare off_t although
the pseudo-prototypes for the new fseeko() and ftello() functions
use it. Handle this like the corresponding problem for va_list
versus the vprintf() family.
Fixed some English errors.
ever saw one), and move the description of NULL behaviour out to a
'NOTES' section, with an extra note that programs should not rely up
on it.
Kinda-approve-by: bde (by not replying to the mail with the diff)
string. From the submitted patch:
Credit for patch: Chris Torek <torek@bsdi.com>
Tod Miller <millert@openbsd.org>
This makes us in line with SunOS 4.1.3_U1, Solaris 2.6, OpenBSD 2.3,
HP-UX 10.20, Irix 5.3. The previous behavior was in line with Ultrix 4.4.
PR: bin/7970
Submitted by: Niall Smart nialls@euristix.ie
In some cases replace if (a == null) a = malloc(x); else a =
realloc(a, x); with simple reallocf(a, x). Per ANSI-C, this is
guaranteed to be the same thing.
I've been running these on my system here w/o ill effects for some
time. However, the CTM-express is at part 6 of 34 for the CAM
changes, so I've not been able to do a build world with the CAM in the
tree with these changes. Shouldn't impact anything, but...
more cleanly integrated with stdio. This should be faster and cleaner
since it doesn't memcpy() the data into a seperate buffer. This lets
stdio allocate and manage the buffer and then hand it over to the user.
Obtained from: Todd Miller <Todd.Miller@courtesan.com> via OpenBSD
leading XXX's. It could wrap an uppercase character through chars
like: [ \ ] ^ _ ` in between Z and a. The backslash and back tick
might be particularly nasty in a shell script context. Also, since
we've been using upper-case generated values for a while now, go with
the flow and use them in the pathname search rotation.
Change the FILE locking to support kernel threads when linked with
libpthread (which you haven't see yet). This requires that libc become
thread-safe and thread-aware, testing __isthreaded before attempting
to do lock/unlock calls. The impact on non-threaded programs is minor.
This change works with libc_r, so it's the best compromise.
implement mkdtemp
improve man page for mk*temp
use arc4random to seed extra XXX's randomly
Optionally warn of unsafe mktemp uses
From various commits by theo de raadt and Todd Miller.
Obtained from: OpenBSD
This should go into 2.2 after a testing period.
case has very little to do with the output size being larger than
INT_MAX.
2. The new #include of <limits.h> was disordered.
3. The new declaration of `on' was disordered (integer types go together).
4. Testing an unsigned value for > 0 was fishy.
Submitted by: bde
instead of Singe Unix, thanx Bruce for explaining, I am not realize
standards war was there.
But now, fix n == 0 case to not return error and fix check for too
big n.
Things left to do: check for overflow in arguments.
Final word is Bruce's quote:
C9x specifies the BSD4.4-Lite behaviour:
[#3] ... Thus, the
null-terminated output has been completely written if and
only if the returned value is less than n.
It means that if we not have any null-terminated output as for n == 0
we can't return value less than n, so we forced to return value
equal to n i.e. 0
The next good thing is glibc compatibility, of course.
2) Do check for too big n in machine-independent way.
3) Minor optimization assuming EOF is < 0
The main argument is that it is impossible to determine if %n evaluated or not
when snprintf return 0, because it can happens for both n == 0 and n == 1.
Although EOF here is good indication of the end of process, if n is
decreased in the loop...
Since it is already supposed in many places that EOF *is* negative, f.e.
from Single Unix specs for snprintf
"return ... a negative value if an output error was encountered"
this not makes situation worse.
to pass not more than buffer size to %n agrument, old variant
always assume infinite buffer.
%n is for actually transmitted characters, not for planned ones.
"return the number of bytes needed, rather the number used"
According to Single Unix specs:
Upon successful completion, these functions return the number of bytes
transmitted excluding the terminating null
1) if buffer size is smaller than arguments size, return buffer
size, not arguments size as before.
2) if buffer size is 0, return 0, not EOF as before.
(now it is compatible with Linux and Apache implementations too).
NOTE: Single Unix specs says:
If the value of n {buffer size} is zero on a call to snprintf(), an
unspecified value less than 1 is returned.
It means we can't return EOF since EOF can take *any* value in general
not especially < 1. Better variant will be return -1 (it is less then
1 and different with n == 1 case) but -1 value is already occuped by
EOF in our implementation, so we can't distinguish true IO error
in that case. So 0 here is only possible case still conforming
to Single Unix specs.
on systems where long doubles are just doubles. FreeBSD hasn't
been such a system since it started using gcc-2.5 many years ago.
The fix is of low quality. It loses precision.
scanf() of long doubles doesn't seem to be used much, but gdb-4.16
uses %Lg format in its expression parser if it thinks that the
system supports printf'ing of long doubles. The symptom was that
floating point literals were usually interpreted to be 0.0.
and forgot what I was trying to do originally and accidently zapped
a feature. :-] The problem is that we are converting a counted buffer in
a malloc pool into a null terminated C-style string. I was calling realloc
originally to shrink the buffer to the desired size. If realloc failed, we
still returned the valid buffer - the only thing wrong was it was a tad
too large. The previous commit disabled this.
This commit now handles the three cases..
1: the buffer is exactly right for the null byte to terminate the
string (we don't call realloc).
2: it's got h.left = 0, so we must expand it to make room. If realloc
fails here, it's fatal.
3: if there's too much room, we realloc to shrink it - a failed realloc
is not fatal, we use the original buffer which is still valid.
so that all these makefiles can be used to build libc_r too.
Added .if ${LIB} == "c" tests to restrict man page builds to libc
to avoid needlessly building them with libc_r too.
Split libc Makefile into Makefile and Makefile.inc to allow the
libc_r Makefile to include Makefile.inc too.
- 0 was returned instead of EOF when an input failure occured while
skipping white-space after 0 assignments. This fixes PR2606. The
diagnosis in PR2606 is wrong.
- EOF was returned instead of 0 when an input failure occurred after
zero assignments and nonzero suppressed assignments.
- EOF was spelled -1.
This should be in 2.2.
