FreeBSD-9 had introduced support for the full set of Unicode
characters to the parsing and processing of keymap character tables.
This support has been extended to cover the table for accented
characters that are reached via dead key combinations in FreeBSD-13.2.
New ioctls have been introduced to support both the pre-Unicode and
the Unicode formats and keyboard drivers have been extended to support
those ioctls.
This commit makes the ABI compatibility functions in the kernel
optional and dependent on COMPAT_FREEBSD13 in -CURRENT.
The kbdcontrol command in -CURRENT and 13-STABLE (before 13.2) has
been made ABI compatible with old kernels to allow a new world to be
run on an old kernel (that does not have full Unicode support for
keymaps).
This commit is not to merged back to 12-STABLE or 13-STABLE. It is
part of review D38465, which has been split into 3 separate commits
due to different MFC and life-time requirements of either commit.
Approved by: imp
Differential Revision: https://reviews.freebsd.org/D38465
Support for Unicode characters had been added to the keyboard code,
but there are keymaps that have accented characters accessed via dead
key combinations, and those were still restricted to 8 bit codes.
This update to kbd.c adds support for Unicode characters and
compatibility code that allows a kbdcontrol command built from kbio.h
without these patches to work on a new kernel.
Compatibility code that allows a new kbdcontrol binary running on an
old kernel to load and display the dead key map will be committed in a
separate commit.
Reviewed by: imp, brooks
Approved by: brooks
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D38381
of various keyboard drivers.
EVIOCGRAB ioctl execution on /dev/input/event# device node gains
exclusive access to this device to caller. It is used mostly for
development purposes and remote control software. See e.g.
https://reviews.freebsd.org/D30020 which is the reason of creation
of this change.
Keyboard grabbing is disabled in KDB and during panics.
MFC with: 4a0db5e292
Tested by: corvink
Differential revision: https://reviews.freebsd.org/D30542
Mark another set of variables that are only used in INVARIANTS builds,
which otherwise result in set-but-not-used warnings.
Fixes: 7dc4d5118c
MFC after: 3 days
Fixes INVARIANTS build with Clang 15, which previously failed due to
set-but-not-used variable warnings.
Reviewed by: dim
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D36097
Summary:
We really should be checking the return value of
ofw_gpiobus_parse_gpios_impl, not the value of sc_pins, which isn't
changed on failure.
Reported by: alfredo@
Reviewers: #powerpc, alfredo
Reviewed By: #powerpc, alfredo
Subscribers: imp, loos
Differential Revision: https://reviews.freebsd.org/D34571
The vast majority of the busy/unbusy users in the tree don't acquire
Giant before calling device_busy/unbusy. However, if multiple threads
are opening a file, say, that causes the device to busy/unbusy, then we
can race to the root marking things busy. Move to using a reference
count to keep track of how many times a device_t has been made busy. Use
that count to make the same decisions that we'd make with the old device
state.
Note: gpiopps.c uses D_TRACKCLOSE. Others do as well. However, there's a
known race with closes that will be corrected for all the drivers that
do this in a future commit.
Sponsored by: Netflix
Reviewed by: hselasky, jhb
Differential Revision: https://reviews.freebsd.org/D26284
This reverts commit 08e7819153.
Commit message was for a very old version of the patch. Will re-commit
with the right one since it's so bad. There's no locked versions of
it...that code was reworked to use refcnt APIs.
Noticed by: jhb, jtrc27
Sponsored by: Netflix
The vast majority of the busy/unbusy users in the tree don't acquire Giant
before calling device_busy/unbusy. However, if multiple threads are opening a
file, say, that causes the device to busy/unbusy, then we can race to the root
marking things busy. Create a new device_busy_locked and device_unbusy_locked
that are the current implemntations of device_busy and device_unbusy. Make
device_busy and unbusy acquire Giant before calling the _locked versrions. Since
we never sleep in the busy/unbusy path, Giant's single threaded semantics
suffice to keep this safe.
Sponsored by: Netflix
Reviewed by: hselasky, jhb
Differential Revision: https://reviews.freebsd.org/D26284
It adds the PIC functionality on top of qoriq_gpio driver.
We need a separate module since the powerpc PIC API is completely
different than on other architectures.
Two types of intr_map_data are supported:
INTR_MAP_DATA_GPIO and INTR_MAP_DATA_FDT.
This way interrupts can be allocated using the userspace gpio
interrupt allocation method, as well as directly from simplebus.
The latter can be used by devices that have its irq routed to a GPIO pin.
Obtained from: Semihalf
Sponsored by: Alstom Group
Expose softc and other necessary things in a separate header.
This is needed for an armv8 specific driver, that will inherit from this
one. Driver mutex was converted to a spin lock, so that it can be later
used in interrupt filter context.
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential revision: https://reviews.freebsd.org/D32587
The pic_* interface was used.
Only edge interrupts are supported by this controller.
Driver mutex had to be converted to a spin lock so that it can
be used in the interrupt filter context.
Two types of intr_map_data are supported - INTR_MAP_DATA_GPIO and
INTR_MAP_DATA_FDT. This way interrupts can be allocated using the
userspace gpio interrupt allocation method, as well as directly from
simplebus. The latter can be used by devices that have its irq routed
to a GPIO pin.
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential revision: https://reviews.freebsd.org/D32587
Now that the upper layers all go through a layer to tie into these
information functions that translates an sbuf into char * and len. The
current interface suffers issues of what to do in cases of truncation,
etc. Instead, migrate all these functions to using struct sbuf and these
issues go away. The caller is also in charge of any memory allocation
and/or expansion that's needed during this process.
Create a bus_generic_child_{pnpinfo,location} and make it default. It
just returns success. This is for those busses that have no information
for these items. Migrate the now-empty routines to using this as
appropriate.
Document these new interfaces with man pages, and oversight from before.
Reviewed by: jhb, bcr
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D29937
qoriq_gpio_pin_setflags() locks the device mutex, as does
qoriq_gpio_map_gpios(), causing a recursion on non-recursive lock. This
was missed during testing for 16e549ebe.
Summary:
They're nearly identical, so don't use two copies. Merge the newer
driver into the older one, and move it to a common location.
Add the Semihalf and associated copyrights in addition to mine, since
it's a non-trivial amount of code merged.
Reviewed By: mw
Differential Revision: https://reviews.freebsd.org/D29520
This reverts commit aa37baf3d7.
The reverted commit was motivated by a problem observed on stable/12,
but it turns out that a better solution was committed in r348309 but not
MFCed. So, revert this change since it is unnecessary and not really
correct: it assumes that the order in which module metadata records is
defined determines their order in the output linker set. While this
seems to hold in my testing, it is not guaranteed.
Reported by: cem
Discussed with: imp
MFC after: 3 days
PNP info definitions currently have an unfortunate requirement in that
they must follow the associated module definition in the module metadata
linker set. Otherwise devmatch can segfault while processing the linker
hints file since kldxref maintains the order in the linker set.
A number of drivers violate this requirement. In some cases this can
cause devmatch(8) to segfault when processing the linker hints file.
Work around the problem for now simply by adjusting the drivers.
Reviewed by: imp
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D28260
This is an import of the Google Summer of Code 2018 project completed by
Christian Kramer (and, sadly, ignored by us for two years now). The goals
stated for that project were:
FreeBSD already has support for interrupts implemented in the GPIO
controller drivers of several SoCs, but there are no interfaces to take
advantage of them out of user space yet. The goal of this work is to
implement such an interface by providing descriptors which integrate
with the common I/O system calls and multiplexing mechanisms.
The initial imported code supports the following functionality:
- A kernel driver that provides an interface to the user space; the
existing gpioc(4) driver was enhanced with this functionality.
- Implement support for the most common I/O system calls / multiplexing
mechanisms:
- read() Places the pin number on which the interrupt occurred in the
buffer. Blocking and non-blocking behaviour supported.
- poll()/select()
- kqueue()
- signal driven I/O. Posting SIGIO when the O_ASYNC was set.
- Many-to-many relationship between pins and file descriptors.
- A file descriptor can monitor several GPIO pins.
- A GPIO pin can be monitored by multiple file descriptors.
- Integration with gpioctl and libgpio.
I added some fixes (mostly to locking) and feature enhancements on top of
the original gsoc code. The feature ehancements allow the user to choose
between detailed and summary event reporting. Detailed reporting provides
a record describing each pin change event. Summary reporting provides the
time of the first and last change of each pin, and a count of how many times
it changed state since the last read(2) call. Another enhancement allows
the recording of multiple state change events on multiple pins between each
call to read(2) (the original code would track only a single event at a time).
The phabricator review for these changes timed out without approval, but I
cite it below anyway, because the review contains a series of diffs that
show how I evolved the code from its original state in Christian's github
repo for the gsoc project to what is being commited here. (In effect,
the phab review extends the VC history back to the original code.)
Submitted by: Christian Kramer
Obtained from: https://github.com/ckraemer/freebsd/tree/gsoc2018
Differential Revision: https://reviews.freebsd.org/D27398
Add enough infrastructure for interrupts on children of the pl061 GPIO
controller. As gpiobus already provided these the pl061 driver also needs
to pass requests up the newbus hierarchy.
Currently there are no children that expect to configure interrupts, however
this is expected to change to support the ACPI Event Information interface.
Sponsored by: Innovate UK
As the pl061 driver can be an interrupt controller attach it earlier in the
boot so other drivers can use it.
Use a new GPIO xref to not conflict with the existing root interrupt
controller.
Sponsored by: Innovate UK
On arm64 we may boot via ACPI. In this case we will still try to manage the
gpio providers as if we are using FDT. Fix this by checking if the FDT node
is valid before registering a cross reference.
Sponsored by: Innovate UK
A PL061 is a simple 8 pin GPIO controller. This GPIO device is used to
signal an internal request for shutdown on some virtual machines including
Arm-based Amazon EC2 instances.
Submitted by: Ali Saidi <alisaidi_amazon.com> (previouss version)
Reviewed by: Ali Saidi, manu
Differential Revision: https://reviews.freebsd.org/D24065
Only linux,code is supported as it maps 1:1 to evdev key codes.
No reverse mapping for freebsd,code yet.
Reviewed by: wulf
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D25940
I2C communication is done by a combination of driving a line low or
letting it float, so that it is either pulled up or driven low by
another party.
r355276 besides the stated goal of the change -- using the new GPIO API
-- also changed the logic, so that active state is signaled by actively
driving a line.
That worked with iicbb prior to r362042, but stopped working after that
commit on at least some hardware. My guess that the breakage was
related to getting an ACK bit. A device expected to be able to drive
SDA actively low, but controller was actively driving it high for some
time.
Anyway, this change seems to fix the problem.
Tested using gpioiic on Orange Pi PC Plus with HTU21 sensor.
Reported by: Nick Kostirya <nikolay.kostirya@i11.co>
Reviewed by: manu
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25684
It's interesting that similar messages from gpiobus_acquire_pin never
had any prefix while gpiobus_release_pin messages were prefixed with
"gpiobus_acquire_pin".
Anyway, the prefix is not that useful and can be deduced from context.
MFC after: 2 weeks
The attach method uses GPIO_GET_BUS() to get a "newbus" device
that provides a pin. But on hints-based systems a GPIO controller
driver might not be fully initialized yet and it does not know gpiobus
hanging off it. Thus, GPIO_GET_BUS() cannot be called yet.
The reason is that controller drivers typically create a child gpiobus
using gpiobus_attach_bus() and that leads to the following call chain:
gpiobus_attach_bus() -> gpiobus_attach() ->
bus_generic_attach(gpiobus) -> gpioiic_attach().
So, gpioiic_attach() is called before gpiobus_attach_bus() returns.
I observed this bug with nctgpio driver on amd64.
I think that the problem was introduced in r355276.
The fix is to avoid calling GPIO_GET_BUS() from the attach method.
Instead, we know that on hints-based systems only the parent gpiobus can
provide the pins.
Nothing is changed for FDT-based systems.
MFC after: 1 week
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT
Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718
Chase the removal of dev from gpioths_dht_readbytes() in r355540.
Reviewed by: ian
Approved by: will (mentor)
Differential Revision: https://reviews.freebsd.org/D22926
r356087 made it rather innocuous to double-register built-in keyboard
drivers; we now set a flag to indicate that it's been registered and only
act once on a registration anyways. There is no misleading here, as the
follow-up kbd_delete_driver will actually remove the driver as needed now
that the linker set isn't also consulted after kbdinit.
Keyboard drivers are generally registered via linker set. In these cases,
they're also available as kmods which use KPI for registering/unregistering
keyboard drivers outside of the linker set.
For built-in modules, we still fire off MOD_LOAD and maybe even MOD_UNLOAD
if an error occurs, leading to registration via linker set and at MOD_LOAD
time.
This is a minor optimization at best, but it keeps the internal kbd driver
tidy as a future change will merge the linker set driver list into its
internal keyboard_drivers list via SYSINIT and simplify driver lookup by
removing the need to consult the linker set.