Commit Graph

29 Commits

Author SHA1 Message Date
Tor Egge
beede91e58 Mask the interrupt before setting the corresponding bit in ipending if
the interrupt is already active.
Don't use lock prefix for operations on ipending.
Always use lock prefix for operations on iactive.
1998-04-22 22:49:29 +00:00
Tor Egge
5dd528cd4e Remove special handling for resuming clock interrupt when using APIC_IO.
The `generic' vector stubs do the right thing.
1998-03-05 21:45:53 +00:00
Tor Egge
02c1dc3bbc When entering the apic version of slow interrupt handler, level
interrupts are masked, and EOI is sent iff the corresponding ISR bit
is set in the local apic. If the CPU cannot obtain the interrupt
service lock (currently the global kernel lock) the interrupt is
forwarded to the CPU holding that lock.

Clock interrupts now have higher priority than other slow interrupts.
1998-03-03 22:56:30 +00:00
Tor Egge
3163861c7b Forward the signal if the process runs on a different CPU. This reduces
the signal handling latency for cpu-bound processes that performs very
few system calls.

The IPI for forcing an additional software trap is no longer dependent upon
BETTER_CLOCK being defined.
1998-03-03 20:55:26 +00:00
Justin T. Gibbs
99117bb6ec Addition of splsoftvm and a VM SWI to handle bus dma related callbacks.
This SWI may be useful for other, defered, VM tasks.
1998-01-15 07:34:01 +00:00
Steve Passe
baf41202ca The improvements to clock statistics by Tor Egge
Wrappered and enabled by the define BETTER_CLOCK (on by default in smpyests.h)

apic_vector.s also contains a small change I (smp) made to eliminate
the double level INT problem.  It seems stable, but I haven't the tools
in place to prove it fixes the problem.

Reviewed by:	smp@csn.net
Submitted by:	Tor Egge <Tor.Egge@idi.ntnu.no>
1997-12-08 22:59:39 +00:00
Justin T. Gibbs
643b3d0cf2 Fix a serious bug I introduced while adding in support for CAM interrupts.
It seems I didn't count my 0's properly when adding the new masks into
icu_vector.s pushing SWI_AST_MASK off the end of the array and screwing
up the indexing for SWI_CLOCK_MASK.

Fix the bug icu_vector.s and also reformat the code in both icu_vector.s and
apic_vector.s so that it will be much harder to make the same mistake in
the future.

Submitted by:	Bruce Evans <bde@zeta.org.au>
1997-09-28 19:30:01 +00:00
Justin T. Gibbs
02a199102d aha1542.c aic6360.c cy.c fd.c ft.c
if_ie.c if_wl.c if_zp.c isa.c isa_device.h
labpc.c mcd.c ncr5380.c scd.c seagate.c si.c
sio.c tw.c ultra14f.c wcd.c wd.c:

	Update for changes in the callout interface.

apic_vector.s icu_vector.s ipl.s ipl_funcs.c:

	Add CAM software/hardware interrupt support.
1997-09-21 21:41:49 +00:00
Steve Passe
20233f27f4 General cleanup of the lock pushdown code. They are grouped and enabled
from machine/smptests.h:

#define PUSHDOWN_LEVEL_1
#define PUSHDOWN_LEVEL_2
#define PUSHDOWN_LEVEL_3
#define PUSHDOWN_LEVEL_4_NOT
1997-09-07 22:04:09 +00:00
Steve Passe
78292efeef Another round of lock pushdown.
Add a simplelock to deal with disable_intr()/enable_intr() as used in UP kernel.
UP kernel expects that this is enough to guarantee exclusive access to
regions of code bracketed by these 2 functions.
Add a simplelock to bracket clock accesses in clock.c: clock_lock.

Help from:	Bruce Evans <bde@zeta.org.au>
1997-08-30 08:08:10 +00:00
Steve Passe
34162fc615 Support for the new FAST_HI algorithm, enabled.
Preliminary support for the INTR_SIMPLELOCK algorithm, disabled.
Note that this code is NOT ready.
1997-08-29 18:45:23 +00:00
Steve Passe
886e789627 The last of the encapsolation of cpl/spl/ipending things into a critical
region protected by the simplelock 'cpl_lock'.

Notes:

 - this code is currently controlled on a section by section basis with
   defines in machine/param.h.  All sections are currently enabled.

 - this code is not as clean as I would like, but that can wait till later.

 - the "giant lock" still surrounds most instances of this "cpl region".
   I still have to do the code that arbitrates setting cpl between the
   top and bottom halves of the kernel.

 - the possibility of deadlock exists, I am committing the code at this
   point so as to exercise it and detect any such cases B4 the "giant lock"
   is removed.
1997-08-24 00:05:37 +00:00
Steve Passe
4a73d99f7e Made PEND_INTS default.
Made NEW_STRATEGY default.
Removed misc. old cruft.

Centralized simple locks into mp_machdep.c
Centralized simple lock macros into param.h

More cleanup in the direction of making splxx()/cpl MP-safe.
1997-08-21 05:08:25 +00:00
Steve Passe
7b185ef809 Preperation for moving cpl into critical region access.
Several new fine-grained locks.
New FAST_INTR() methods:
 - separate simplelock for FAST_INTR, no more giant lock.
 - FAST_INTR()s no longer checks ipending on way out of ISR.
sio made MP-safe (I hope).
1997-08-20 05:25:48 +00:00
Steve Passe
e7802310d2 Added trap specific lock calls: get_fpu_lock, etc.
All resolve to the GIANT_LOCK at this time, it is purely a logical partitioning.
1997-08-10 20:59:07 +00:00
Steve Passe
6354231eaa Added 'lock' instruction before 3 places that update ipending.
This may or may not fix the "high IO freezes SMP kernel" problem.
1997-08-09 19:40:28 +00:00
Steve Passe
d1283d9c9d Converted the TEST_LOPRIO code to default.
removed PEND_INTS 1st try
direct call to MPtrylock
1997-07-31 05:42:06 +00:00
Steve Passe
412f3e4d71 Modified the PEND_INTS algorithm to fix the ISA INT loss problem.
Noticed by:	dave adkins <adkin003@gold.tc.umn.edu> and others.
1997-07-28 03:59:54 +00:00
Steve Passe
12084b3cf1 clock.c:
- removed TEST_ALTTIMER.
 - removed APIC_PIN0_TIMER.
 - removed TIMER_ALL.

apic_vector.s:
 - new algorithm where a CPU uses try_mplock instead of get_mplock:
	if successful continue as before.
	if fail set ipending bit, mask INT (to avoid recursion), cleanup & iret.

   This allows the CPU to return to successful work, while the ISR will be run
   by the CPU holding the lock as part of the doreti dance.
1997-07-26 01:53:04 +00:00
Steve Passe
812e4da7a8 New simple_lock code in asm:
- s_lock_init()
 - s_lock()
 - s_lock_try()
 - s_unlock()

Created lock for IO APIC and apic_imen  (SMP version of imen)
 - imen_lock

Code to use imen_lock for access from apic_ipl.s and apic_vector.s.
Moved this code *outside* of mp_lock.

It seems to work!!!
1997-07-23 20:47:19 +00:00
Steve Passe
d2ecb616f2 Split TEST_CPUSTOP code into CPUSTOP_ON_DDBBREAK and mainline code. 1997-07-18 21:27:53 +00:00
Steve Passe
bb0be67512 Cleanup. 1997-07-15 03:28:53 +00:00
Steve Passe
4e914a7eb7 Tighten up asm code for EOI access. 1997-07-15 02:49:21 +00:00
Steve Passe
c064ef9175 Cleanup old stop_cpus/restart_cpus() cruft.
new code for handling mixed-mode 8259/APIC programming without 'ExtInt'
new code to control other CPUs: stop_cpus()/restart_cpus()/_Xstopcpu
1997-07-13 01:18:51 +00:00
Steve Passe
b956b5370c First cut at code for handling "spurious INTerrupts".
First cut at code for handling CPU stop/restart.

Notes:
	not working properly yet.
1997-07-06 23:32:38 +00:00
Steve Passe
58db75841d apic_vector.s:
- added Xcpustop IPI code to support stop_cpus()/restart_cpus().
   it is off by default, enable via smptests.h:TEST_CPUSTOP

intr_machdep.h:
 - moved +ICULEN to lower level.
 - added entry for Xcpustop.
1997-06-27 23:48:05 +00:00
Peter Wemm
b3196e4b9f Preliminary support for per-cpu data pages.
This eliminates a lot of #ifdef SMP type code.  Things like _curproc reside
in a data page that is unique on each cpu, eliminating the expensive macros
like:    #define curproc (SMPcurproc[cpunumber()])

There are some unresolved bootstrap and address space sharing issues at
present, but Steve is waiting on this for other work.  There is still some
strictly temporary code present that isn't exactly pretty.

This is part of a larger change that has run into some bumps, this part is
standalone so it should be safe.  The temporary code goes away when the
full idle cpu support is finished.

Reviewed by: fsmp, dyson
1997-06-22 16:04:22 +00:00
Peter Wemm
0589fe3b6e The SWI_NET_MASK and SWI_TTY_MASK handlers are now back adjacent to the
top of the hardware interrupt handlers.  Apparently this is slightly
faster with the bit scanning instruction that looks these up - this set of
changes reverts the original change.

Reviewed by: bde
1997-05-31 08:59:51 +00:00
Steve Passe
81c1993f87 Split vector.s into UP and SMP specific files:
- vector.s		<- stub called by i386/exception.s
 - icu_vector.s		<- UP
 - apic_vector.s	<- SMP

Split icu.s into UP and SMP specific files:
 - ipl.s		<- stub called by i386/exception.s (formerly icu.s)
 - icu_ipl.s		<- UP
 - apic_ipl.s		<- SMP

This was done in preparation for massive changes to the SMP INTerrupt
mechanisms.  More fine tuning, such as merging ipl.s into exception.s,
may be appropriate.
1997-05-26 17:58:27 +00:00