greater than the size we autosized. Without this fix, systems with
drives under 10GB can end up with very small /usr partitions...
Broken since: January 2002
Tripped over by: simon
at runtime and to support distributing additional kernels:
o remove kernel from the base tarball
o add new kernel tarballs
o build + package both SMP and GENERIC kernels when an <arch>/conf/SMP
config file is present
o add sysinstall support for multiple kernels
o update sysinstall to probe for the number of cpus on a system
and auto-select smp/up kernel accordingly
o add a post-kernels install hook to fixup /boot/kernel
o add -ldevinfo to boot crunch for sysinstall's cpu probing logic
Notes:
1. On HEAD this code is not currently used because GENERIC kernels
include SMP. This work is mainly intended for RELENG_6 where the
GENERIC kernel is UP. If HEAD changes to match then just enable
WITH_SMP in sysinstall/Makefile.
2. The cpu probing support is done with acpi and MPTable; this means
some systems will require work for auto-detection to work.
3. The handling of /boot/kernel may need to be revisited; for now
we rename one kernel at the last moment (SMP if installed, otherwise
GENERIC). There are other, possibly better, approaches.
Lots of help from ru, emaste, scottl, and jhb.
this now compiles on i386 with WARNS?= 3. Most of the fixes included
adding missing 'static' keywords to internal functions, using fully-defined
terminators in statically defined arrays of structs, and various
signed vs unsigned mismatches. Also G/C'd unused configSecurity()
function.
by syscons.
- If we are running as init, popup the country menu before the main menu.
If a non-default country is chosen, then a second menu is brought up
to let the user choose a keymap. By default the default keymap for
the country that was selected is highlighted. If the user chooses the
default country, then the default keymap is just assumed and the user
is not presented with the keymap menu. Currently the default country
is set to "United States" except for PC98 which assumes "Japan".
PR: bin/93853
Submitted by: Seth Kingsley sethk at magnesium dot net
MFC after: 3 days
completely noop.
- Geometry sanitization for non-interactive mode is moved to correct place.
Reported by: Anton Yuzhaninov <citrin at citrin dot ru>
Pointyhat: me
For example, you can dynamically generate and load configuration file
depending on the hardware configuration with the following template:
mediaSetCDROM
mediaOpen
command='/dist/rescue/sh /dist/scripts/install.sh'
system
mediaClose
configFile=/tmp/generated.cfg
loadConfig
Now we have full access to files on the media before installation begins.
possible for information to be copied from the group file to the group
file in the FTP area. This patch based on a patch from Zak Johnson
<zakj at nox dot cx>.
PR: bin/25851
Submitted by: Ted Mittelstaedt <tedm at toybox punkt placo period com>
Approved by: jhb (proxy mentor)
MFC after: 3 days
MFC to: RELENG_5, RELENG_6
Security: Prevents possible group information leakage
PR: bin/90057
Submitted by: Charlie M. McDonald <BoredOutkast at yahoo punkt com>
Approved by: jhb (mentor by proxy)
MFC to: RELENG_5, RELENG_6
MFC After: 3 days
instance, the dreaded shared memory problem in PostgreSQL coming back to
haunt you after a binary update.
PR: 89817
Submitted by: edwin
MFC after: 2 days
- Use pool.ntp.org servers where possible, thanks to
Chuck Swiger <cswiger at mac dot com> .
- Update list of Swedish NTP servers, thanks to
Fredrik Lindberg <fli+freebsd-current at shapeshifter dot se> .
PR: bin/75479
MFC after: 1 day
1. Provide larger /, /var, and /tmp partitions (the last increase was
in 2001, and we now have both larger hard drives and more space-hungry
software.)
2. If there is enough space available, allocate extra space to /var
sufficient to store a crash dump.
On systems where harddrivesize > 3 * RAMsize + 10GB, the default sizes
will now be as follows:
swap RAMsize * 2
/ 512 MB
/tmp 512 MB
/var 1024 MB + RAMsize
/usr the rest (8GB or more)
On systems where harddrivesize > RAMsize / 8 + 2 GB, the default sizes
will be in the following ranges, with space allocated proportionally:
swap RAMsize / 8 -- RAMsize * 2
/ 256 MB -- 512 MB
/tmp 128 MB -- 512 MB
/var 128 MB -- 1024 MB
/usr 1536 MB -- 8192 MB
On systems with even less disk space, the existing behaviour is not
changed.
Approved by: re (kensmith)
MFC after: 1 day
(or once people stop arguing about colours of paint)
it is running during installations. The vsystem() function does get
used after this happens (e.g. if you manually configure the network
interface and ask it to enable the interface) so it needs to be a
little smarter about whether it uses /stand/sh or /bin/sh.
MFC after: 3 days
it about the lease file location and not invoking it with the (non-existant)
'-r' option. Releasing leases works vastly different now, so this isn't
needed.
Submitted by: sam
Approved by: re
the NTP server list.
The servers are by Internet Multifeed Co., and connected to their
IX service JPNAP. It would be a good NTP server for machines in Japan.
See also http://www.jst.mfeed.ad.jp/ for more details (Japanese only).
Reviewed by: nork
fields that got added to it recently-ish. While here document
what each of the fields is based on discussion with portmgr@.
Patch from: murray (slightly adapted)
MFC after: 1 day
with EBUSY and a cdrom is not mounted at /cdrom, sysinstall fails to
treat it as an error and thinks that the disk mounted ok. However, it
doesn't find a cdrom.inf file so it complains. Later when it tries to
unmount the disk due to a mediaClose() umount(2) returns an error, and it
never clears its internal mounted flag. The fix here is to properly
handle EBUSY as an error if there isn't a CD already mounted at /cdrom.
- Add a new CDROMInitQuiet variable that can be used to shut up the dialog
box about the mount(2) system call failing when trying to mount a CD-ROM.
This is used by the feature described below.
- When using a fixit CD, first try to see if we can mount the disc in the
drive now and use it as a fixit CD. If not, then prompt the user to
insert the disc and try again. If we do succeed on the first "silent"
probe then we don't ask the user to eject the disk after leaving fixit
mode.
- Add a simple file existence test to make sure that the disc that we mount
really is a livefs disc.
- Explicitly switch back to ttyv0 when using the standard console after
the fixit shell dies. Previously this behavior worked accidentally
because all the fixit modes popped up a dialog box which contained a
hidden switch to ttyv0.
MFC after: 1 day
disk. This is main reason why sysinstall presents SCSI CDROM to
available disks in Fdisk/Label menu. In addition, adding a blank
SCSI CDROM to the menu generates floating point exception in sparc64.
Disk_Names() just extracts sysctl "kern.disks". Why GEOM treats SCSI
CDROM as a disk is beyond me and that should be investigated.
For temporary workaround, ignore SCSI CDROM device.
PR: sparc64/72962
Tested by: R. Tyler Ballance < tyler AT tamu DOT edu>
MFC after: 1 week
- Allow the upload directory to be optional. If the upload directory
field is cleared to the empty string then no directory will be created.
- Don't create a bin/ subdirectory in ftp's home dir containing ls(1) and
date(1) as ftpd(8) no longer requires it.
- Create a pwd.db file in etc/ instead of a passwd file.
- Ignore NIS compat entries in /etc/group and /etc/master.passwd when
building the anonymous files.
PR: bin/60662
Submitted by: Olafur Osvaldsson oli at isnic dot is
This adds a safebelt that prevents users to mark more than
one "active" partitions, which will lead to a unbootable
machine, especially in multi-boot configurations.
PR: bin/71404
MFC After: 3 days
Approved by: murray (mentor)
VT6122 gigabit ethernet chip and integrated 10/100/1000 copper PHY.
The vge driver has been added to GENERIC for i386, pc98 and amd64,
but not to sparc or ia64 since I don't have the ability to test
it there. The vge(4) driver supports VLANs, checksum offload and
jumbo frames.
Also added the lge(4) and nge(4) drivers to GENERIC for i386 and
pc98 since I was in the neighborhood. There's no reason to leave them
out anymore.
concensus seems to be that is best left for doing post-install.
Discussed on: freebsd-current@
Tested with: make release
Approved by: re@
MFC after: 3 days
to get used to the fact that Perl is no longer part of the base system.
It is practically impossible to install any useful package and not get
Perl automatically pulled in as a dependency. So the typical user will
get their Perl.
This change greatly reduces the amount of manual labor in building the
miniinst.iso in release building.
contents of /usr/src/rescue. Until now, the files were shipped with
releases but sysinstall would ignore them (resulting in a non-buildable
source tree).
Sanity checked by: jhb
install of Postfix fails since Postfix 1 is picked from INDEX instead
of Postfix 2.
The problem is that the package_add function matches multiple Postfix
packages and then installs a "random" version (the last one found in
INDEX). This does not occur with a CD-ROM install since there is only
one Postfix package on the CD-ROM.
The correct solution to this would be to check the origin field from
INDEX instead of the package name, but due to the way sysinstall is
made that is not trivial, so instead work around the problem by
hard-coding the Postfix major and minor revision (for the current
stable version) to install directly into the package_add call.
PR: misc/65426
Reported by: Harold Kachelmyer <bugs@princessharold.net>
Approved by: trhodes
some confusion as to how large the EFI system partition should be,
but 100MB seems to be either the maximum, the minimum or the default
size, so make the EFI partition 100MB.
global variables. On ia64, save a pointer to the efi chunk as well.
o At the same time, change checkLabels() to define these globals instead
of having the caller of checkLabels() pass addresses to variables for
these. Change the two callers correspondingly.
o Spent a bit more time adjusting try_auto_label() to prepate for having
the EFI partition created on ia64.
o Remove efi_mountpoint(). The EFI chunk is now available without having
to iterate over the disks and chunks to find it every time we need it.
o On ia64, now that the root chunk is globally available, set the
vfs.root.mountfrom tunable in loader.conf. This avoids that one cannot
boot into FreeBSD after an install. The kernel cannot find the root
device without a little help...
of releases. The -DNOCRYPT build option still exists for anyone who
really wants to build non-cryptographic binaries, but the "crypto"
release distribution is now part of "base", and anyone installing from a
release will get cryptographic binaries.
Approved by: re (scottl), markm
Discussed on: freebsd-current, in late April 2004
o Remove the code that creates the boot directory on the EFI file
system after it has been mounted, as well as remove the code
that creates the symlink from /boot -> /efi/boot (*). As a result,
/boot will be extracted onto the root file system.
o Add a function efi_mountpoint() that returns the mount point of
the EFI file system or NULL if no EFI partition is created. This
function is used to both check whether there's an EFI file system
and to return what its mount point is.
o When there's no EFI file system, ask the user if this is what he
or she wants. Since we extract /boot onto the root file system,
we do not actually need an EFI file system for the installation to
work. Whether one wants to install without an EFI partition is
of course an entirely different question. We allow it...
o When we're done installing and need to fix up the various bits
and pieces, check if there's an EFI partition and if yes, move
/boot to /efi/boot and create a symlink /boot -> /efi/boot (*).
This is a much more reliable way to get /boot onto the EFI
partition than creating the symlink up front and hope its being
respected. It so happened that we never had the boot directory
end up on the EFI partition. We make the symlink relative.
(*) /efi is a place holder for the actual EFI mount point of course.
we'll actually create an EFI partition with a FAT file system instead
of an UFS file system. It also allows us to give a sensible default
mount point for EFI partitions so that people don't have to guess.
This also means that we can now remove new_efi_part(), which did the
same thing as new_part(), except it created a FAT file system. The
function wasn't called when the EFI partition was created from scratch
though, which was the problem. By passing the partition type to the
various functions, we can deal with EFI without having to duplicate
code.
that actually need it. This makes it easier for a platform porter to
find the files that may need tweaking to support whatever MD specific
partitioning is needed. It also helps to prevent that the libdisk API
gets exposed and/or used where it's not needed.
installation as far as most people are concerned but both 'Standard' and
'Select' begin with S and 'Select' is winning. This makes it so 'Select'
is not select-able using a keystroke but that is probably for the best
and the text on the screen adequately describes how to move back and forth
between 'Select' and 'Exit'.
Adapted from work by: josef@
PR: i386/37999
MFC after: 1 week
- Don't look for partitions inside a FreeBSD chunk on ia64 when mounting
the filesystems just before the chroot and install.
- Write entries out to /etc/fstab for filesystems that aren't inside a
FreeBSD chunk, but are a top-level chunk under the disk.
addresses. For arch's with 64-bit longs, this is a nop, but for i386 this
allows sysinstall to properly handle disks and filesystems > 1 TB.
Changes from the original patch include:
- Use d_addr_t rather than inventing a blkcnt type based on int64_t.
- Use strtoimax() rather than strtoull() to parse d_addr_t's from config
files.
- Use intmax_t casts and %jd rather than %llu to printf d_addr_t values.
Tested on: i386
Tested by: kuriyama
Submitted by: julian
MFC after: 1 month
/libexec to /mnt2/libexec, and execute /mnt2/rescue/ldconfig to add
the /mnt2/lib and /mnt2/usr/lib library directories. Thanks to John Baldwin
for working to track this down.
Submitted by: jhb
mostly used on 80x25 displays, and the actual window is about ten
characters narrower than that, resulting in the need for horizontal
scrolling. No functional change.
RELENG_5_2 candidate.
needed to be statically populated with device nodes. The first two are no
longer true, which makes the third pretty moot. In fact, we don't seem to
put device node bits into the distribution archives at all anymore.
So..... remove the god-aweful nasty hack that force unmounted devfs during
installation so that static device nodes could land in /dev. Now that the
vnode cleaner handles this case better this isn't strictly needed, but
axeing code in sysinstall is almost always benficial. Thanks to Don Lewis
for pointing out this attribute of sysinstall.
(Lite Edition) respectively. These "lite" packages are streamlined to
provide users with the core essentials for each desktop and to fit on the
release disc 1.
Approved by: re (scottl)
permitting the administrator to select a securelevel top operate
at. Include a helpfile summarizing some of the information from
init(8). This allows for explicit configuration of securelevels,
which was previously implicit in Security Profile selection.
Currently, there are no checkboxes for the active securelevel,
because sysinstall's facilities for deriving "current settings"
from rc.conf may use only one variable, not two, and I opted for
the simplest approach at this point.
Approved by: re (scottl)
selection is used to drive two configuration parameters:
(1) Default enable/disable for sshd
(2) Default enable/disable for securelevels
Replace this with an explicit choice to enable/disable sshd. A
follow-up commit will add a configuration option to the Security
post-install configuration menu to set the securelevel in rc.conf
explicitly. This should reduce the level of foot-shooting associated
with accidental enabling of securelevels, make the nature and
implications of the securelevel configuration options more explicit,
as well as make the choice to enable/disable sshd more explicit.
Approved by: re (scottl)
a partition size on ia64. It's not true.
o Ask for a mountpoint for EFI partitions as well and check that it
isn't "/".
o On ia64 we may need to add EFI partitions. Make sure we pass the
right arguments to Create_Chunk_DWIM() in that case.
to better deal with the fact that we need an EFI partition and
that we need to have a mountpoint for it.
o When creating a new partition, add EFI to the list of types
the user can select from. This makes it easy to create an EFI.
o Do not include wizard.c on ia64.
o The user cannot create a partition on ia64 that's a multiple of
the cylinder size. We don't have a notion of cyclinders.
o Also allow swap and filesystem partitions outside a freebsd slice.
This is typically the case for GPT.
o Allow chunks of type "whole" to be displayed at the top. This is
to allow a GPT disk to be labeled. We need a slice out of which we
can make partitions, but a GPT disk doesn't have slices. For GPT
disks a chunk of type "whole" can then be used as a placeholder.
(1) Don't modify the configuration of the NFS server as a result of
selecting a profile. We already explicitly prompt for the NFS
server configuration during install, and the user may not get
much advance notice that we're turning it off again. Instead,
use profiles (for better or for worse) only for security tuning.
(2) Don't modify the sendmail setting as part of the security profile:
use the default from /etc/defaults/rc.conf rather than explicitly
specifying. Note that the default in /etc/defaults/rc.conf is
more conservative than the explicit rc.conf entry added by
sysinstall during install, as it does not permit SMTP delivery.
(3) Update "congratulations on your profile" text to reflect these
changes.
Note that security profiles now affect only the securelevel and sshd
settings. My leaning would be to make sshd an explicit configuration
option, move securelevels to the security menu, and drop security
profiles entirely. However, that requires more plumbing of sendmail
than I'm currently willing to invest.
We may want to add a "permit SMTP delivery" question to the install
process.
archaic at this point in time. Pretend nobody runs FreeBSD 1.x anymore
in order to not confuse people needlessly.
Laplink support probably doesn't even work at this point in time anyway...
- Add 'enable_exim="YES"' to rc.conf(5)
- Use the default exim configuration file from the port
- When using sendmail, disable some more scripts that use sendmail specific
parameters
- Have sysinstall tweak mailer.conf(5) substitution
- Use 'N' flag for newsyslog(8)
Submitted by: Oliver Eikemeier <eikemeier@fillmore-labs.com>
Reviewed by: sheldonh, simon
Tested by: myself (trhodes) and submitter
written by Stuart Walsh and Duncan Barclay (with some kibbitzing by
me). I'm checking it in on Stuart's behalf.
The BCM4401 is built into several x86 laptop and desktop systems. For the
moment, I have only enabled it in the x86 kernel config because although
it's a PCI device, I haven't heard of any standalone NICs that use it. If
somebody knows of one, we can easily add it to the other arches.
This driver uses register/structure data gleaned from the Linux
driver released by Broadcom, but does not contain any of the code
from the Linux driver itself. It uses busdma.
rl(4) driver and put it in a new re(4) driver. The re(4) driver shares
the if_rlreg.h file with rl(4) but is a separate module. (Ultimately
I may change this. For now, it's convenient.)
rl(4) has been modified so that it will never attach to an 8139C+
chip, leaving it to re(4) instead. Only re(4) has the PCI IDs to
match the 8169/8169S/8110S gigE chips. if_re.c contains the same
basic code that was originally bolted onto if_rl.c, with the
following updates:
- Added support for jumbo frames. Currently, there seems to be
a limit of approximately 6200 bytes for jumbo frames on transmit.
(This was determined via experimentation.) The 8169S/8110S chips
apparently are limited to 7.5K frames on transmit. This may require
some more work, though the framework to handle jumbo frames on RX
is in place: the re_rxeof() routine will gather up frames than span
multiple 2K clusters into a single mbuf list.
- Fixed bug in re_txeof(): if we reap some of the TX buffers,
but there are still some pending, re-arm the timer before exiting
re_txeof() so that another timeout interrupt will be generated, just
in case re_start() doesn't do it for us.
- Handle the 'link state changed' interrupt
- Fix a detach bug. If re(4) is loaded as a module, and you do
tcpdump -i re0, then you do 'kldunload if_re,' the system will
panic after a few seconds. This happens because ether_ifdetach()
ends up calling the BPF detach code, which notices the interface
is in promiscuous mode and tries to switch promisc mode off while
detaching the BPF listner. This ultimately results in a call
to re_ioctl() (due to SIOCSIFFLAGS), which in turn calls re_init()
to handle the IFF_PROMISC flag change. Unfortunately, calling re_init()
here turns the chip back on and restarts the 1-second timeout loop
that drives re_tick(). By the time the timeout fires, if_re.ko
has been unloaded, which results in a call to invalid code and
blows up the system.
To fix this, I cleared the IFF_UP flag before calling ether_ifdetach(),
which stops the ioctl routine from trying to reset the chip.
- Modified comments in re_rxeof() relating to the difference in
RX descriptor status bit layout between the 8139C+ and the gigE
chips. The layout is different because the frame length field
was expanded from 12 bits to 13, and they got rid of one of the
status bits to make room.
- Add diagnostic code (re_diag()) to test for the case where a user
has installed a broken 32-bit 8169 PCI NIC in a 64-bit slot. Some
NICs have the REQ64# and ACK64# lines connected even though the
board is 32-bit only (in this case, they should be pulled high).
This fools the chip into doing 64-bit DMA transfers even though
there is no 64-bit data path. To detect this, re_diag() puts the
chip into digital loopback mode and sets the receiver to promiscuous
mode, then initiates a single 64-byte packet transmission. The
frame is echoed back to the host, and if the frame contents are
intact, we know DMA is working correctly, otherwise we complain
loudly on the console and abort the device attach. (At the moment,
I don't know of any way to work around the problem other than
physically modifying the board, so until/unless I can think of a
software workaround, this will have do to.)
- Created re(4) man page
- Modified rlphy.c to allow re(4) to attach as well as rl(4).
Note that this code works for the sample 8169/Marvell 88E1000 NIC
that I have, but probably won't work for the 8169S/8110S chips.
RealTek has sent me some sample NICs, but they haven't arrived yet.
I will probably need to add an rlgphy driver to handle the on-board
PHY in the 8169S/8110S (it needs special DSP initialization).
This option adds Postfix and Exim to the list, however, qmail is not added
due to license restrictions.
Collaborated with: Simon L. Nielsen <simon@nitro.dk>
Reviewed by: jhb, re@, -audit.
'use entire disk'. Neither for ia64 while I'm here - it needs a MBR if
its going to use fdisk+disklabel. The ia64 case is mostly academic though
because you'd be creating two partitions (dos + freebsd) rather than
a single freebsd-only partition.
PC98 boot blocks don't support UFS2. We keep newfs(8) defaulting to
UFS2.
Warn users that FreeBSD can only boot from a root file system smaller
than 1.5TB; hopefully this will get fixed by the patches currently
floating around on -CURRENT.
Reviewed by: nyan
ethernet controller. The driver has been tested with the LinkSys
USB200M adapter. I know for a fact that there are other devices out
there with this chip but don't have all the USB vendor/device IDs.
Note: I'm not sure if this will force the driver to end up in the
install kernel image or not. Special magic needs to be done to exclude
it to keep the boot floppies from bloating again, someone please
advise.
FreeBSD 5.1-RELEASE and later:
- newfs(8) will now create UFS2 file systems unless UFS1 is specifically
requested (-O1). To do this, I just twiddled the Oflag default.
- sysinstall(8) will now select UFS2 as the default layout for new
file systems unless specifically requested (use '1' and '2' to change
the file system layout in the disk labeler). To do this, I inverted
the ufs2 flag into a ufs1 flag, since ufs2 is now the default and
ufs1 is the edge case. There's a slight semantic change in the
key behavior: '2' no longer toggles, it changes the selection to UFS2.
This is very similar to a patch David O'Brien sent me at one point, and
that I couldn't find.
Approved by: re (telecon)
Reviewed by: mckusick, phk, bmah
read from CD from 2k to 16k, because in the modern world of meta-packages
(Gnome et al) the length of this list could easily owerflow limit causing
strange things to happen, ranging from installation failure due to list
truncation to complete stack trashing (there is very vague bounds checking).
For example, x11/gnome2-fifth-toe runtime dependencies list is 2,418 bytes
long.
Due to obvious reasons, this is an immediate MFC candidate.
Sponsored by: Porta Software Ltd
MFC after: 1 day
If we already have a lease and restart sysinstall (or something with
the net configuration goes wrong), we would have to reboot just
because there is a dhclient hanging around.
Reviewed by: murray (re)
MFC after: 5 days
physical memory. The default is still 2x physical memory. The nominal
calculation is used to back-off swap auto-allocation ('A'uto command)
when the disk is not large enough to accomodate all filesystem auto-defaults.
This gives other partitions (like /usr) more priority over swap on smaller
disks.
This should help solve reported auto-sizing failures on machines with small
hard drives and huge amounts of memory. For example, a machine with 2G of
disk and 4G of memory will fail to auto-size without this fix.
MFC after: 3 days
'base' dist rename.
- Rework struct dist to allow for different types of dists. There are
currently three types of dists: DT_TARBALL, the traditonal gzipped and
split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in
the tree that has its own array of dists as its contents. For example,
the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE
dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table
that contains 'sbase', 'ssys', etc.
- Add helper macros for defining array entries for the different types of
dists to try and make the statically defined dist table in dist.c more
readable.
- Split the logic to deal with a DT_TARBALL dist out of distExtract()
and into its own distExtractTarball() function. distExtract() now
calls other functions to extract each dist.
- Tweak the percentage complete calculation in distExtractTarball() to
do the multiply prior to the divide so it doesn't have to use floating
point.
- Axe the installPackage() function along with the special handling for
the perl and XFree86 dists in distExtractAll() since distExtract()
handles package dists directly now.
- Add back in subdists for the X packages based on the split up packages
that XFree86-4 uses that as closely map to the X dists we used with
X 3.3.x.
- Lots of things like distSetX() and the X dist masks are no longer
#ifndef X_AS_PKG since we use them in both cases now.
- Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only
call it in that case anyways, and it's not suitable for the X_AS_PKG
case.
- Add in X dist menus for the X_AS_PKG case.
Approved by: re
load drivers from the driver floppy if the "driver_floppy" variable is set
in the kernel environment and call this function after probing devices but
before displaying the main menu.
X-MFC after: as soon as I finish committing to current
Approved by: re@ (blanket)
i386, remove the seatbelt preventing users from setting the UFS2 flag
on the root file system on i386. This seatbelt did not exist on
other platforms.
MFC candidate.
type of new slices and to change the type of existing slices. This also
has the advantage of moving a few #ifdef PC98's up to where the macros
are defined instead of in the middle of the code.
- Change the behavior of the 'T' option in the slice editor so that the
default value in the dialog box is the current type of the existing
slice rather than defaulting to changing the slice to a FreeBSD slice as
this is more intuitive.
Approved by: re
editor, in order to support specifying UFS2 as a newfs option.
(1) Support three different newfs types: NEWFS_UFS, NEWFS_MSDOS, and
NEWFS_CUSTOM. Don't mix up the arguments to them: you can't use
soft updates on an msdos file system.
(2) Distinguish adding new arguments to the newfs command line from
replacing it. Permit the addition of new arguments by the user for
NEWFS_UFS. If we entirely replace the command line provided by
sysinstall, call it NEWFS_CUSTOM. 'N' will now add additional
arguments; 'Z' will opt to replace the newfs command line entirely,
but will prompt the user with their current command line as a
starting point.
(3) Construct the newfs command line dynamically based on the options
provided by the user at label-time. Right now, this means selecting
UFS1 vs. UFS2, and the soft updates flag. Drop in some variables
to support ACLs and MAC Multilabel in the future also, but don't
expose them now.
This provides sysinstall with the ability to do more "in band" editing
of the newfs command line, so we can provide more support for the user,
but doesn't sacrifice the ability to entirely specify the newfs command
line of the user is willing to give up on the cushiness factor. It
also makes it easier for us to specify defaults in the future, and
define conditional behavior based on user configuration selections.
For now, we default to UFS1, and permit UFS2 to be used as the root
only on non-i386 systems.
While I was there, I dropped the default fragment and block sizes,
since newfs has much more sensible defaults now.
Reviewed by: jhb, marcel
Approved by: re
ia64 bits from: marcel
rather than installX11package().
- Add a perl psuedo-dist that installs the perl package. The perl
distribution is selected by default when a User distribution set is
selected. It is not selected when a Minimal distribution set is
selected. The perl distribution may be toggled manually in the
custom menu just as other distributions.
Approved by: re
bug fixed yesterday. New slices created in the fdisk editor and slices
whose sub-type is changed are of type 'mbr' if their sub-type is not a
magic type, not type 'unknown'.
Approved by: re
o Mount the EFI file system as msdosfs and not ufs as it's a FAT
file system. Introduce Mount_msdos() for this to go side-by-side
with Mount().
o Also, since mounting is performed as a command (which means it's
queued, sorted, lost, found and executed), we cannot create a
directory on the file system by calling mkdir. We must make sure
the mkdir happens after the mount. Introduce Mkdir_command() to
allow mkdir operations to be queued, sorted, lost, found and
executed as well.
Approved by: re (jhb, rwatson)
- Only declare mouse menus if WITH_MICE.
- Only declare syscons menus if WITH_SYSCONS.
- Only declare fdisk editor functions if WITH_SLICES.
Approved by: re
WITH_SYSCONS is defined.
- Only define mouse menus and mouse menu items if WITH_MICE is defined.
- Use WITH_SLICES instead of explicit lists of architectures to control
the layout of menus dependent on if slices are used on this arch or not.
- Only include the linux startup option if WITH_LINUX is defined.
- Only include the SVR4 startup option on i386. It doesn't work on sparc64,
and it is debatable that it even works on i386.
- Change the OSF1 startup option to execute configOSF1() instead of just
setting the variable so that /compat/osf1 gets created.
Tested on: i386, alpha, sparc64
Approved by: re
fdisk editor if WITH_SLICES. Before this on arch's that didn't support
slices such as alpha and sparc64 you would drop into the fdisk editor after
doing an Undo in the label editor.
Approved by: re
of an explicit list of architecture defines.
- Tweak the message prior to the label editor in the !WITH_SLICES case to
make it slightly less awkward since this is the first dialog we see after
starting an install.
- Only offer to customize syscons settings if WITH_SYSCONS.
- Offer to enable Linux compat if WITH_LINUX. Before we only did this for
i386.
- On the alpha, offer to enable OSF/1 compat after asking about Linux
compat.
- Only offer to configure moused(8) if WITH_MICE is defined.
Tested on: i386, alpha, sparc64
Approved by: re
and more maintainable.
- WITH_SYSCONS: defined on all arch's that support syscons (currently i386,
alpha, and ia64)
- WITH_MICE: defined on all arch's that support moused(8) (currently i386,
alpha, and ia64)
- WITH_SLICES: defined on all arch's that use disk slices (currently i386
and ia64)
- WITH_LINUX: defined on all arch's that support Linux binary compat
(currently i386 and alpha)
Approved by: re
the two GNOME 1-based alternatives.
While here, note that a majority of the items in this menu are not
sentences, and remove trailing dots to make the remainder consistent.
Reviewed by: marcus
Approved by: re (bmah)
